Related
hi guys....i'm getting fail to boot 4 message when turning on my phone. it happened after flashing 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf coz i had a boot loop after flashing a custom ROM and forgot to wipe data. i got a unlocked phone using deprunlock.sbf. i also tried reflashing 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_5-CM-release-keys-signed-Sprint-US.sbf but when i get to "Switching device to BP Pass through..." its goes to "Error Switching device to BP Pass through.." and fails flashing....need help pls!
Are you able to get in fasboot mode or android recovery? Or is it the standard failed to boot 4 rsd starting error?
Sent from my MB855 using xda app-developers app
mof9336 said:
Are you able to get in fasboot mode or android recovery? Or is it the standard failed to boot 4 rsd starting error?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
its the standard failed to boot 4 starting rsd mode. can this still be fixed?
Make sure your battery has a good charge( do the usb trick if you have to) and try flashing another sbf. Did you try the derpunlock.sbf
Sent from my MB855 using xda app-developers app
mof9336 said:
Make sure your battery has a good charge( do the usb trick if you have to) and try flashing another sbf. Did you try the derpunlock.sbf
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
sorry but i'm kinda new to Motorola Phones, what is the usb trick?last night i tried flashing the 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf but had the re-enumerate error coz i ran out of battery. Will try still get a charger today but i'm really intrigued about the usb trick thingy....could you help me out?
Google charge any phone with out a charger. Lot a videos on it
Sent from my MB855 using xda app-developers app
mof9336 said:
Google charge any phone with out a charger. Lot a videos on it
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
ahahahahaha....it looks kinda wierd....but anyways when i get a good charge....what's the next thing i should do?should i flash the 198_7?i tried deprunk last night but didn't work....failed to flash....
G69D said:
ahahahahaha....it looks kinda wierd....but anyways when i get a good charge....what's the next thing i should do?should i flash the 198_7?i tried deprunk last night but didn't work....failed to flash....
Click to expand...
Click to collapse
thanks for your help man....fixed my phone now....thanks a lot!
G69D said:
thanks for your help man....fixed my phone now....thanks a lot!
Click to expand...
Click to collapse
my phone is also showing Failed to boot 2
please share how you managed to restore it.
thanks
portman said:
my phone is also showing Failed to boot 2
please share how you managed to restore it.
thanks
Click to expand...
Click to collapse
I too am getting the failed to boot 2 after the motorola update came out. please explain how to fix this issue please
mrperez83 said:
I too am getting the failed to boot 2 after the motorola update came out. please explain how to fix this issue please
Click to expand...
Click to collapse
go to fastboot mode and find android recovery. wipe date and cache. then reboot your phone. download the 198_7 and flash using RSDLite....that should put you on stock ROM.hope it helps you guys....
Do not flash any sbf, after ota update installation.
how you fixed your phone
G69D said:
thanks for your help man....fixed my phone now....thanks a lot!
Click to expand...
Click to collapse
hi sir,
i have the same error as you had please help me how to fix this and which sbf file i need to download and flash it.......
on starting screen it says "failed to boot error 4"
thank you
G69D said:
its the standard failed to boot 4 starting rsd mode. can this still be fixed?
Click to expand...
Click to collapse
please explain me for fixed failed to boot 4 or please upload file img for fix this trouble
thank's
I was using D-WiZ ROM (3.0.2) with BMM (3.0.2 also)... I erased my cid a few weeks ago ( I clicked on the backup but... it seems it didn't backed up :/ ) changed to latest EU ICS kernel and after noticing a battery drain with the ROM, I decided to fastboot to 4.0.4 so I could get everything back to normal... The process went okay but when it tries to boot... the black screen appears. I tried using BP tools but it's stuck at boot animation -.-
Any ideas? Thanks in advance <3
Re: [Q] Bricked my phone :\ PLEASE HELP :'(
Someone please help me :/
AW: [Q] Bricked my phone :\
Wipe data and try to reboot again.
Sent from my BataKanged XT910
How can I wipe data? I can only access the stock recovery!
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Ive faced this before. Also from d-wiz. But i can totally say its my fault. Dunno about u,but.
1) The custom recovery is gone because I didnt untick the reboot option in the last phase of rom installation.(The OP n even the aroma installer clearly state to untick,back to custom recovery 1st before 1st reboot)
2) I also face the black screen issue after flashing stock with rsd. But turn out when i flashed other rom,means,download another choice of rom but still for the region,it worked ok at last. Maybe u should try?
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Ive faced this before. Also from d-wiz. But i can totally say its my fault. Dunno about u,but.
1) The custom recovery is gone because I didnt untick the reboot option in the last phase of rom installation.(The OP n even the aroma installer clearly state to untick,back to custom recovery 1st before 1st reboot)
2) I also face the black screen issue after flashing stock with rsd. But turn out when i flashed other rom,means,download another choice of rom but still for the region,it worked ok at last. Maybe u should try?
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Do you have to boot with BP tools? 'Cause the main proble here is that my CID is erased and it doesn't want to boot stock :\
Arachnida said:
Do you have to boot with BP tools? 'Cause the main proble here is that my CID is erased and it doesn't want to boot stock :\
Click to expand...
Click to collapse
Oh my.. Which means u didnt put ur backup of cid in a safe place.. Then i guess even if im in ur place,i won't know what to do.. Sorry..
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Oh my.. Which means u didnt put ur backup of cid in a safe place.. Then i guess even if im in ur place,i won't know what to do.. Sorry..
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
It didn't even backed up :\ I realized when I was searching for it :S:S what's the name of the cid backup? so I can search again in my SD.
Arachnida said:
It didn't even backed up :\ I realized when I was searching for it :S:S what's the name of the cid backup? so I can search again in my SD.
Click to expand...
Click to collapse
Its cid.img
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Its cid.img
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Can I fastboot the cid.img? or how can I try installing one? Sorry for bothering :/
Originally Posted by williemeiser<br />
Its cid.img<br />
<br />
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
<br />
<br />
Can I fastboot the cid.img? or how can I try installing one? Sorry for bothering :/
Click to expand...
Click to collapse
Apparently we cant. Its unique for every single device,if im not mistaken.
Sent from my MOTOROLA RAZR using xda premium
williemeiser said:
Apparently we cant. Its unique for every single device,if im not mistaken.
Sent from my MOTOROLA RAZR using xda premium
Click to expand...
Click to collapse
Yeah I know it's unique but I saw someone who could do it just to boot... so my question is, can I install the .img while on stock recovery or in another way? I just want to try any option :\
I don't wanna lose $300 right away u.u
Anyone can help me?? Still no phone
Arachnida said:
Anyone can help me?? Still no phone
Click to expand...
Click to collapse
Did you tray another ICS OTA? I have my CID on dropbox and mail and other places, but I remember flashing to Stock ROM with RSD without CID and it boot
If you can enter into stock recovery, try wipe/format cache and factory reset. Then fastboot with rsd.
Then root your phone, but remember after it reboots (during root) to reboot using BPtool.
Then you can retore your CID. If you lose it, you can boot only using bptool or BMM wich can handle the missing CID
Try flashing a GB ROM with RSD Lite, then booting BP Tools.
Its my only suggestion.
But as long i know...if you lost your cid, you're screwed up bro.
I never had to worry about CID (i have a unlocked bootloader) but i still have a backup of it on my computer, googledrive, email and dropbox
heblu said:
If you can enter into stock recovery, try wipe/format cache and factory reset. Then fastboot with rsd.
Then root your phone, but remember after it reboots (during root) to reboot using BPtool.
Then you can retore your CID. If you lose it, you can boot only using bptool or BMM wich can handle the missing CID
Click to expand...
Click to collapse
I will try this first and I hope it works :\
pablobhz said:
Try flashing a GB ROM with RSD Lite, then booting BP Tools.
Its my only suggestion.
But as long i know...if you lost your cid, you're screwed up bro.
I never had to worry about CID (i have a unlocked bootloader) but i still have a backup of it on my computer, googledrive, email and dropbox
Click to expand...
Click to collapse
Then I will try this one
Thanks for the answers guys...
If anyone else have opinions, PLEASE POST THEM.
I still have no phone :\ This backup blackberry phone sucks, I want my razr back
If your phone shows the bootanimation, then I think there's no problem. Just make a factory reset from stock recovery and reboot.
blackhawk_LA said:
If your phone shows the bootanimation, then I think there's no problem. Just make a factory reset from stock recovery and reboot.
Click to expand...
Click to collapse
When I hit ''recovery'' on the menu (power button + vol up/down) it enters and show's an image of an android robot laying in the ground with an exclamation sign... how can I wipe data, factory reset, etc?
OMG IT WORKED AFTER THE FACTORY RESET, WOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOT
THANKS A LOT, THIS IS THE BEST DAY EVER :')
Got accepted by germany so I can go to study there and got my phone fixed omg
THANKS!!!!
i need to install Clock workmod on my photon and when i put the photon in RSD mode and connect to the pc , only istall de drivers of motorola at this name " Motorola Flash interface" and i don't know why RSD doesn't reconigze the phone , btw , the phone work's and everything , i only want to install the recovery and maybe a custom ROM , thanks
only use rsd lite when flashing sbf files never use it to add a custom recovery. I attached the cmw recovery for photon below
my computer wont recognize my photon at all xd
Do you have the drivers installed?
Sent from my MB855 using xda app-developers app
MarcquisDale said:
only use rsd lite when flashing sbf files never use it to add a custom recovery. I attached the cmw recovery for photon below
Click to expand...
Click to collapse
Thanks but , still i need to unlock the bootloader of the photon to install the ROM via recovery
MarcquisDale said:
Do you have the drivers installed?
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
all drivers =(
Did you try pushing the vol up button after you selected rsd mode and attached phone to computer
Sent from my MB855 using xda app-developers app
MarcquisDale said:
Did you try pushing the vol up button after you selected rsd mode and attached phone to computer
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
yes and doesn't work neither i try all buttons
Ive never experienced this problem try to see if you can get someone to look at it
Sent from my MB855 using xda app-developers app
hey everyone. i want to use my nandroid back that i've made before I flashed cm10.1 to use my providers warrenty. If I restore from the nandroid backup it should work? no chances to get hard brick?
hezided said:
hey everyone. i want to use my nandroid back that i've made before I flashed cm10.1 to use my providers warrenty. If I restore from the nandroid backup it should work? no chances to get hard brick?
Click to expand...
Click to collapse
A nandroid backup is not an sbf file. Hard bricks come from flashing the wrong sbf file.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
A nandroid backup is not an sbf file. Hard bricks come from flashing the wrong sbf file.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ok thankks. and there is a way to lock the bootloader? or th least hide the mark that the bootloader is unlocker?
hezided said:
ok thankks. and there is a way to lock the bootloader? or th least hide the mark that the bootloader is unlocker?
Click to expand...
Click to collapse
flash the sbf file that matches the stock version you had prior to unlocking
Sent from my MB860 using xda app-developers app
palmbeach05 said:
flash the sbf file that matches the stock version you had prior to unlocking
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
where can i find it and how exactly I flash it?
and theres no fear of flashing sbf elder version to get a hard brick?
hezided said:
where can i find it and how exactly I flash it?
and theres no fear of flashing sbf elder version to get a hard brick?
Click to expand...
Click to collapse
if you flash the sbf that matches the stock version you had prior to unlocking, you'll be fine. flash anything older than that, and you risk bricking.
standby for sbf link. will edit this post with link in a min or two
http://www.das8nt.com/downloads.html
http://forum.xda-developers.com/showthread.php?t=1125944
Sent from my MB860 using xda app-developers app
palmbeach05 said:
if you flash the sbf that matches the stock version you had prior to unlocking, you'll be fine. flash anything older than that, and you risk bricking.
standby for sbf link. will edit this post with link in a min or two
http://www.das8nt.com/downloads.html
http://forum.xda-developers.com/showthread.php?t=1125944
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
thanks again I have found my version and i am downloading it right now. but how to flash it? I need to enter rsd mode in my phone and through rsd lte? I've downloaded an gz file type. and inside it has ths sbf file, and RSD lite can use both types. I know that it sounds like stupid question but I only want to verify, I need to use the sbf file and not the gz right?
hezided said:
thanks again I have found my version and i am downloading it right now. but how to flash it? I need to enter rsd mode in my phone and through rsd lte?
Click to expand...
Click to collapse
No problem. Search for RSD online, i'm running 5.7, but i think i was told by another user the other day that its up to 6.1 or something. reboot phone and hold vol up. it will display something about standing by for rsd support. connect phone to computer, let any necessary drivers install from device. then load sbf file into rsd, and after the drivers have installed, hit the detect for device button, and then flash the sbf to the device
Sent from my MB860 using xda app-developers app
palmbeach05 said:
No problem. Search for RSD online, i'm running 5.7, but i think i was told by another user the other day that its up to 6.1 or something. reboot phone and hold vol up. it will display something about standing by for rsd support. connect phone to computer, let any necessary drivers install from device. then load sbf file into rsd, and after the drivers have installed, hit the detect for device button, and then flash the sbf to the device
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I have the RSD lite from my previous installation, shouldnt it be enough? or like you said i need rsd online?
hezided said:
I have the RSD lite from my previous installation, shouldnt it be enough? or like you said i need rsd online?
Click to expand...
Click to collapse
i meant go online and search for rsd lite. your current install should be fine, but if you want to upgrade it you can.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
i meant go online and search for rsd lite. your current install should be fine, but if you want to upgrade it you can.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ok great thank you very much!
hezided said:
ok great thank you very much!
Click to expand...
Click to collapse
no problem. one more thing. you may get an error message when you do it. if you flashed a different radio to your device, you need to follow the following steps first
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot. 2. Power on phone and select fastboot 3. execute: fastboot flash radio bp.img, Where bp.img baseband image files 4. execute: fastboot reboot 5. Phone automatically boot on the android recovery mode 6. Wipe userdata/cache 7. Reload in RSD mode 8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
no problem. one more thing. you may get an error message when you do it. if you flashed a different radio to your device, you need to follow the following steps first
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot. 2. Power on phone and select fastboot 3. execute: fastboot flash radio bp.img, Where bp.img baseband image files 4. execute: fastboot reboot 5. Phone automatically boot on the android recovery mode 6. Wipe userdata/cache 7. Reload in RSD mode 8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
where can i get this radio image?
OK, did you at least try looking for it on your own?
hezided said:
where can i get this radio image?
Click to expand...
Click to collapse
http://www.mediafire.com/?q83792uk2f895
it has a list of the common radio.img files from when the sbfs were first out
Sent from my MB860 using xda app-developers app
ravilov said:
OK, did you at least try looking for it on your own?
Click to expand...
Click to collapse
"Radio image (baseband" I dont even know what it is and if it suppose to match to my version or anything
hezided said:
"Radio image (baseband" I dont even know what it is and if it suppose to match to my version or anything
Click to expand...
Click to collapse
radio.img=baseband what carrier do you have?
Sent from my MB860 using xda app-developers app
orange IL
Yes, and you won't know until you start doing your own research.
hezided said:
orange IL
Click to expand...
Click to collapse
this looks to be the one for orange
Sent from my MB860 using xda app-developers app
Hi all
I purchased what seemed to be a xt910 from ebay once arrived it worked on the android gb retailasia.03 , what was weird about it is that the outside was branded with verizon and behind was written on the phone xt912 while the about page said it was a XT910.
On the phone was superuser which i guess it had to be rooted
I messed up and used Matt's utility to tro to update the phone to ics and got stuck in a bootloop it wont start , go into recovery or anything i have been trying to flash with verizon ics , gb , asiaretail ics and gb it is very confusing since i dont know if it's a verizon or xt910 orignally.
I have not been updating over 4.0.4 since i read that once you update you can't turn back although i tried to update it never booted and received errors on RSDLITE 5.7 cdt.bin Failed on every time
I was low on battery and ordered a factory cable from ebay , If this is helpfull
I am hopeless and gave it to a shop , of course he couldn't do it so this is my last resort and anyn help will be much apreciated i couldn't even use and tryout this amazing phone and yet i have it 1 month stuck on fastboot
I am currently located in israel and people just don't know this stuff here
i will provide pictures as well and hope some of you can help me since i am a noob in this and it's way more complicated then i expected
IT will be greatly apreciated
thanks!
Jeremy S
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
adamivie said:
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
Click to expand...
Click to collapse
Thank you for responding , you mean in mat's utility? which i used 1.7 ? i can't access anything in the boot menu when opening recovery it will reboot in ap fastboot mode.
thank you
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
adamivie said:
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
Click to expand...
Click to collapse
I understand well i tried what you say the motorola red logo appears for 1 second after pushing the recovery option and then goes back to Fastboot it doesnt go further to the option of wipe/data i think i must have corrupted the bootloader or something
Thanks for trying to figure it out
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Yea. Try to use Matt's 1.90 utility for the Razr
I have replied ya fo ya question just check ya inbox and try that .
Thx
Please hit that thanks button if i helped ya
Gus194 said:
Yea. Try to use Matt's 1.90 utility for the Razr
Click to expand...
Click to collapse
So i tryed using Matt's Utility 1.7 and i attached the results still a lot a failed messages i added the 6.16.211 update on the sd card and that didn't work i am afraid to update to jelly bean and if it doesn't work ill be stuck and could maybe not go back to ICS .
My current Bootloader is on 0A.6C and am still stuck on the bootloader with error (Invalid sp data , 0x0004E , CG system)
Since my recovery is corrupted i am not able to install anything before it flashes correctly
thank you guys for trying to figure it out with me
jerjer01 said:
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Click to expand...
Click to collapse
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
I have tryed using CMD flashboot commands to flash and put system_sugned and recovery into the same folder and it still failed at the same errors it would with razrutility 1.6,1.7,1.82 thanks maybe i need to put xt910 flashboot files since matts utility has no effect and although it looks like a xt912 i received the phone with asiaretail xt910 firmware which then i screwed with matt's utility to to update to ics
I am very desperate to make it work please help me guys ,
jerjer01 said:
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
Click to expand...
Click to collapse
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
jerjer01 said:
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
Click to expand...
Click to collapse
Eh..no...Maybe my english is too bad to explain.Give me your email or somethig,I will update to somewhere to let you download it.
Sent from my XT910 using xda app-developers app
I would really like to make this phone work and for this reason i am giving out a reward (donation) to the one who goes with me through the process and help me unbrick my phone
Thanks!
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
我顶你个肺隔膜 said:
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Follow the steps below.
1.Doawload a RsdLite,you can find it online.
2.Download a XT912 Jellybean Fastboot
File on internet.
3.Connect your phone to the computer with AP mode.(You can get into AP mode with this way ress the volume - button and power button about 10 seconds,when the screen turns into black,release the power button and keep pressing the volume button.)
4.Run the RSDLite,pull your Fastboot file into the RsdLite window,click the button in the middle.Wait the process over and the phone will reboot automaticly.
If your really can solve the problem in tjis way,dont give any donation to me,donation isnt the reason why I want to help.
Sent from my XT910 using xda app-developers app
unfurtunately that didnt work out and it failed as well
any other tips are very wecome
thank you