a friend of mine, try to root my Motorola Razar, but now my phone is stuck on the bootloader or something i am not sure, on the scrreen is printed this:
AP fast flash mode (flash failure)
OA.6c
Device is locked. Satus code: 0
u sound like ul need to get rsd lite and in the Android development section get hold of the correct Motorola rom u need to flash it.. there are tons of topics regarding these sort of problems.. unfortunately not at home to provide any relevant links but hope its a start!!
Sent from my XT910 using XDA
Gsm or cdma version?
Well either way, use this utility to flash back to stock, and reroot, make sure to only flash a rom that is for your phone ie. Gsm or cdma, and your area.
http://forum.xda-developers.com/showthread.php?t=1486718
Sent from my DROID RAZR using xda premium
Thanks Mate..
i will try to do it again..
if it fail again, i will contact in the thread again
describe exactly what happened
installed leak?
If it fails to rsd back you probably have been updated to ics, that being the case trying to rsd back to gingerbread will always fail. You will need to rsd to the .211 build. I'd use mats new tool possibly skip to the new 214 leak then use the same bundled tool for rooting. (given you are cdma) I must recommend a full charge for any flashing, a low battery can result in failed flash and also blows your batt stats to hell
Sent from my DROID RAZR using xda premium
Related
Long story...But in short, I bricked my razr just before ICS was released, ripped the battery ribbon...Now after using Matt's 1.7 utility when I try to go into recovery I get an android lying on his back with his body opened and an exclamation point. I really need some help. Please.
Try to use RSD and flash in ICS. I dont know if u have CDMA or GSM razr but if u have GSM flash in this via rsd lite http://forum.xda-developers.com/showthread.php?t=1747800
Sorry, I know I should have said, I have a Verizon CDMA Razr.
ScorpiusO said:
Sorry, I know I should have said, I have a Verizon CDMA Razr.
Click to expand...
Click to collapse
Download matts utility 1.8.1 and choose option 1, the dead android you see is ics recovery. If press vol^and volume down when you see that it will allow you into recovery or ap fast. How did you brick did you try and side load ics from gb? You have ice recovery..
When that Android pops up just hold both volume button's at the same time to get recovery to show up
Sent from my DROID RAZR using xda premium
That fixed it. I didn't need to download 1.81. Thanks a bunch, it's going to be nice getting back to my Razr, I had to go back to my X while I was waiting.
Glad to see you fixed it,
first time i ran into that it took me a second to figure it out also
Sent from my DROID RAZR using xda premium
Just picked up a Razr Maxx from Verizon and I've been a Samsung/HTC guy for a while and I'm a little nervous about rooting and flashing. My last motorola phone was a X2...I hate that whole sbf/rsd lite process...been loving my unlocked boot loaders.
Anyway, can someone just verify the way to go about this? I'm assuming most ROMs are now bases off the .211 firmware.
Take a look at my screen shot. I'm assuming I put the drivers and rsd onto the PC...then root...slap on bootstrap and flash? I saw somewhere where a different recovery was needed to flash and would cause a brick if not used. Safe strap? Also would like clarification on kexec. Is this built into the ROMs? And what's boot menu?
Thanks in advance for the help guys.
*********EDIT*********
Ok, I went ahead just just Rooted and threw Eclipse on my RAZR. Its booting now. I still have questions on how to use RSD. I'm noticing MOTO doesnt use SBF fies anymore. I also would like to know about Safestrap vs. Bootstrap and which is better to use. And how does kexec work. I know what it does...but is there a seperate zip to flash on top of a rom? or does the rom include it when you flash it? I would really appreciate it if someone cleared it up for me.
Sent from my DROID RAZR using xda premium
Most all of the cdma development uses safestrap.
You cannot use two recoveries at once.
Matt's 1.81 utility is the easiest way to flash back to stock or to root. It can be found at droidrzr.com under RAZR development under cdma section.
Most of the rom development is over there too.
Make sure you have complete files, factory cable, and a healthy charge when flashing.
Also read the safestrap thread over there.
Sent from my DROID RAZR using xda premium
bwheelies said:
Most all of the cdma development uses safestrap.
You cannot use two recoveries at once.
Matt's 1.81 utility is the easiest way to flash back to stock or to root. It can be found at droidrzr.com under RAZR development under cdma section.
Most of the rom development is over there too.
Make sure you have complete files, factory cable, and a healthy charge when flashing.
Also read the safestrap thread over there.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Thank you so much. Always a little confusing when switching phones...especially to one with a locked bootloader. Totally cleared it all up. Thanks again.
I can't get it to flash, gives me an error "Failed Flashing Process 1/11 flash cdt.bin "cdt.bin_si..." I had it rooted, uninstalled everything with the root, unrooted, wouldn't let me update to ICS, so I was just going to flash to stock and do it, and now this. I'm starting to panic a little, as I can't even get it to boot. I thought I had the right files, but now I'm not so sure. I have an XT912, it's a Vzw Razr, not the Maxx. I just want to go to stock GB, so I can go up to ICS. I had 2.3.6 update installed. I really need this phone for tomorrow, so any and all help is very much appreciated.
I'm using RSD Lite to flash this buy the way
My fastboot file is called "SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTCEE_HWp2b_Service1FF_fastboot.xml"
Go to droidrzr.com under RAZR cdma and development section. Look for Matt's 1.7 utility and download and run the flash to stock. Make sure Motorola drivers are installed before flashing.
They are in the file when you unzip it.
Sent from my DROID RAZR using xda premium
bwheelies said:
Go to droidrzr.com under RAZR cdma and development section. Look for Matt's 1.7 utility and download and run the flash to stock. Make sure Motorola drivers are installed before flashing.
They are in the file when you unzip it.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Okay, thank you. Right now, I'm downloading the VRZ_XT912_6.51-73_DHD-11_TA-3_1FF_02.XML.zip files, to flash with the RSD lite utility. Will this do the same thing, or should I go with Matt's 1.7 utility instead?
Actually, this looks like the tool I used to root. Can I use his new 1.81 utility and just use the ICS Fastboot files, to go straight to ICS?
I have yet to get rsd-lite to fully flash to my phone. Matt's utility does work.
Not sure what gb version you are on, look to the earlier builds of the RAZR utility to install earlier builds.
Sent from my DROID RAZR using xda premium
bwheelies said:
I have yet to get rsd-lite to fully flash to my phone. Matt's utility does work.
Not sure what gb version you are on, look to the earlier builds of the RAZR utility to install earlier builds.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Yeah, I think I accidentally grabbed the EU version of the files, instead of the US version. Anyhow, I'm just flashing the ICS official files, as that was my goal anyhow. I figure if it doesn't work at this point, it's not like I'm really losing anything by trying. It's good to know that I'm not the only one that the RSD flasher has given issues though.
I installed the official ICS, and now it won't do anything. No screen, holding power does nothing, can't boot to safestrap, nothing. It booted once, had an android guy with some blue shape spinning, a progress bar filled up, and then it restarted. Went to the DUAL CORE TECHNOLOGY screen, then goes to black. Then nothing. Nothing. Absolutely nothing. I could cry. I figured out that if I hold the vol down and power, it'll restart, but just does the same thing. What am I doing wrong?? I don't understand it at all.
Have you used Matt's utility yet?
Sent from my DROID RAZR using xda premium
Is your battery dead?
bwheelies said:
Have you used Matt's utility yet?
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
I tried his 1.81 utility, no go. Someone on another site said they'd seen a similar case, and I need to use the 1.6 version, and then follow the update path from there. I'm downloading that right now.
My battery isn't dead yet, but I have no way of charging it (Going into BP Tools from the fastboot menu does me nothing), so it's just a matter of time. I really wish I could just go to bed, but I need this phone for my morning commute, as I'm really not familiar with the area.
You need gingerbread utility then ota if you want from there.
Sent from my DROID RAZR using xda premium
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
GibsonSGKing said:
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
Click to expand...
Click to collapse
I just want to know how people keep bricking there phone if there using the safestrap recovery?
GibsonSGKing said:
Yeah, after running the 1.6 utility it booted, and I'm now doing the OTA's to get to ICS. Thanks for all of the help, and I must also say that the folks over at droidrzr.com were incredibly helpful as well.
Thanks again
Click to expand...
Click to collapse
Hello,
It sounds like i'm having the same problem with my phone like you. But i'm not having a Verzion phone. Should this work also?
Rooted and unlocked moto electrify.
i have been flashing roms on several phones for many years. i always rely on the devs here at xda to help me through and you guys never fail!!!
my electrify is unlocked and rooted, been running th3bills cm10 for several weeks, also tried miui aokp and others. all great roms and great work!!
i was changing my keyboard on my phone and ran into trebuchet stopped working and couldnt get it to do anything. i tried reflashing the rom without wiping hoping it would fix it but it did. i did a reset and wipe and reload of the rom and it still stopped working. i then decided to, while in recovery, partition the sd card mount just cause i like to learn and i do that by trying thing, anyway, when i did it hung up for like 5 mins. thought it was kinda long so i pulled the battery. At this point im not sure of all the steps i took to get cm10 on my phone but it took a lot. after i put the battery back in and started the phone the screen comes on, says unlocked up in the corner but no red dual core symbol, instead it has this on the screen.......................................
unlocked
PwrReason: SW_AP_RESET
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyS0,115200n8
13 Early USB Enumeration
14 BP Tools
----------------------------------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
Fastboot
.......................Not sure whats up and if there is any affects on the rom
If any devs or members have any info or want to try to fix this or can fix if it does cause problems please reply to the post. ill take any info available.
thanx to all the devs for all their hard work! i think i speak for everybody when i say how much your work is appreciated!!!
[email protected]
pm me on the xda app as well. rhewins2268
electrify rooted unlocked and running th3bills cm10
Its not erased. Your boot logo is erased and possibly your PDS partition is lost too. Just means you can't activate PR update your prl normally anymore.
Sent from my MB855 using xda premium
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
To fix, restore your PDS through CWM, and also flash a boot logo through fastboot or cwm with a flashable zip.
Sent from my MB855 using xda premium
Looking into that now. In the meantime....is it going to have bad affects on my ROM. Also do you know where to get files needed to fix?
Sent from my MB855 using xda premium
No. I actually prefer it that way. Its just an issue whenever you sbf back to stock and your phone attempts to activate itself.
As far as files and such, search via Google or xda for PDS fix, it'll show either a thread for the atrix or photon.
And then search for boot logos to flash.
Sent from my MB855 using xda premium
So just to clarify.... when I sbf back to stock I will have to do what to activate?
Will I have to dial *228 or what will I run into for issues?
I have already done a lot of Google searches and found the file you spoke of last night for the atrix (does it matter?) and instruction on how to push it to my phone.
Just trying to be ahead of the game and have my info before moving forward. Phone is running great with no issues so far.
Basically picking your brain for knowledge and help before I soft brick or some sh** and have to lock my bootloader to get my phone back.
So....... thank you very much for your help and insight into this. Had never seen it before.
Sent from my MB855 using xda premium
http://forum.xda-developers.com/showthread.php?p=14888120
Follow that link and since your bootloader is unlocked, use fast boot to flash. download the PDS gingerbread zip and unzip.
Doing that will allow you to ota update in case you revert to stock.
For flashing a boot logo, follow this link and read a few posts into it to find a cwm-flashable zip to restore your boot logo: http://forum.xda-developers.com/showthread.php?t=1187337
***Don't sbf with the uscc sbf because it will lock your bootloader. ***
Sent from my MB855 using xda premium
I believe this is the question and then i'll leave you alone for a day or so lol
Do i have to be on a stock rom to do this or can i do it on th3bill's cm10 or other custom roms?
To you hoslayer13.... you have been a wealth of knowledge! I tip my hat to you sir!
To answer your question, yes you can be on a custom rom to do this but before you do check your PDS partition first. I am pretty sure there will be only a lost-found folder with nothing in it.
Sent from my MB855 using xda premium
Yes it is just an empty folder. Using file manager that comes with cm10 that comes with root access in the root directory I find a folder "PDS" and it is empty. I'm going to push the fix now and will update my results.
Sent from my MB855 using xda premium
I flashed the fix and have noticed to Ill affect on the ROM so far. Also flashed boot logo. Working great!
Thanks again hoslayer13!!
Thank you xda! Always there!
Sent from my MB855 using xda premium
Hey no problem. I'm glad I could help
Sent from my MB855 using xda premium
Needing some help again!!! Hoping you can help. dont know if you noticed but i started a new thread. reall did it this time. Fail to boot 1. only have fastboot. bootloader relocked while rsding 2.3.4 on the phone. it fail and never rebooted. hoping you can help. whem i type moto-fastboot oem unlock i get infooem not implemented or something. the bootloader has to be from 2.3.4 though cause that is what i flashed.
ANY THING AT ALL PLEASE
i can get to fastboot and flash the RDL3_unlocked.smg file and achieve temp unlock but no rsd so can go to the next step. Im trying everything i can and still nothing yet. Gonna keep trying but some help woyld really be great!! PLEASE!!
Hi all
I purchased what seemed to be a xt910 from ebay once arrived it worked on the android gb retailasia.03 , what was weird about it is that the outside was branded with verizon and behind was written on the phone xt912 while the about page said it was a XT910.
On the phone was superuser which i guess it had to be rooted
I messed up and used Matt's utility to tro to update the phone to ics and got stuck in a bootloop it wont start , go into recovery or anything i have been trying to flash with verizon ics , gb , asiaretail ics and gb it is very confusing since i dont know if it's a verizon or xt910 orignally.
I have not been updating over 4.0.4 since i read that once you update you can't turn back although i tried to update it never booted and received errors on RSDLITE 5.7 cdt.bin Failed on every time
I was low on battery and ordered a factory cable from ebay , If this is helpfull
I am hopeless and gave it to a shop , of course he couldn't do it so this is my last resort and anyn help will be much apreciated i couldn't even use and tryout this amazing phone and yet i have it 1 month stuck on fastboot
I am currently located in israel and people just don't know this stuff here
i will provide pictures as well and hope some of you can help me since i am a noob in this and it's way more complicated then i expected
IT will be greatly apreciated
thanks!
Jeremy S
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
adamivie said:
Hello jerjer
Did you clear data / factory reset it at least twice in a row? Before and after using the utility? Many times boot loop is easily fixed this way.
Sorry to state the obvious but first things first right.
Click to expand...
Click to collapse
Thank you for responding , you mean in mat's utility? which i used 1.7 ? i can't access anything in the boot menu when opening recovery it will reboot in ap fastboot mode.
thank you
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
adamivie said:
From recovery not from matts util. Access by holding vol up and down then pressing power. Clear data twice from recovery, use mats util then, clear data twice again.
I am not a guru but I can at least suggest what I would try
Click to expand...
Click to collapse
I understand well i tried what you say the motorola red logo appears for 1 second after pushing the recovery option and then goes back to Fastboot it doesnt go further to the option of wipe/data i think i must have corrupted the bootloader or something
Thanks for trying to figure it out
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Reflash the fastboot file with RSD.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Yea. Try to use Matt's 1.90 utility for the Razr
I have replied ya fo ya question just check ya inbox and try that .
Thx
Please hit that thanks button if i helped ya
Gus194 said:
Yea. Try to use Matt's 1.90 utility for the Razr
Click to expand...
Click to collapse
So i tryed using Matt's Utility 1.7 and i attached the results still a lot a failed messages i added the 6.16.211 update on the sd card and that didn't work i am afraid to update to jelly bean and if it doesn't work ill be stuck and could maybe not go back to ICS .
My current Bootloader is on 0A.6C and am still stuck on the bootloader with error (Invalid sp data , 0x0004E , CG system)
Since my recovery is corrupted i am not able to install anything before it flashes correctly
thank you guys for trying to figure it out with me
jerjer01 said:
I would love to but i don't know what to flash anymore since its a verzion cdma(+GSM) since normal asiaretail was on it , whatever i tried flashing fro asia europe middle east i still receive cdt.bin error on rsdlite on step 6 or i receive motoboot.img failed flash
very confusing , should i try to go on jellybean with matt's utility or this won't work since i failed all updates (bricked) after gingerbread 2.3.6
thank you
Click to expand...
Click to collapse
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Try to flash a jelly bean.It might work~
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
I have tryed using CMD flashboot commands to flash and put system_sugned and recovery into the same folder and it still failed at the same errors it would with razrutility 1.6,1.7,1.82 thanks maybe i need to put xt910 flashboot files since matts utility has no effect and although it looks like a xt912 i received the phone with asiaretail xt910 firmware which then i screwed with matt's utility to to update to ics
I am very desperate to make it work please help me guys ,
jerjer01 said:
i tried using
http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
And it failed devtree failed , boot.img failed and more..
i am really confused about now
Click to expand...
Click to collapse
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
我顶你个肺隔膜 said:
Flash the system with CMD Fastboot.exe.It might damge your phone,so please be careful and careful.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
jerjer01 said:
Thank you , can you please send me an instruction , in cmd instead of writing flashboot i need to write flashboot.exe?
is this what you mean?
Following steps from the link i send?
thanks for answering
Click to expand...
Click to collapse
Eh..no...Maybe my english is too bad to explain.Give me your email or somethig,I will update to somewhere to let you download it.
Sent from my XT910 using xda app-developers app
I would really like to make this phone work and for this reason i am giving out a reward (donation) to the one who goes with me through the process and help me unbrick my phone
Thanks!
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
我顶你个肺隔膜 said:
If you are using a XT912 with a asiaRetail Rom,just flash a XT912 4.1.2 Rom through RSD Lite.
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Follow the steps below.
1.Doawload a RsdLite,you can find it online.
2.Download a XT912 Jellybean Fastboot
File on internet.
3.Connect your phone to the computer with AP mode.(You can get into AP mode with this way ress the volume - button and power button about 10 seconds,when the screen turns into black,release the power button and keep pressing the volume button.)
4.Run the RSDLite,pull your Fastboot file into the RsdLite window,click the button in the middle.Wait the process over and the phone will reboot automaticly.
If your really can solve the problem in tjis way,dont give any donation to me,donation isnt the reason why I want to help.
Sent from my XT910 using xda app-developers app
unfurtunately that didnt work out and it failed as well
any other tips are very wecome
thank you