Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
I was using the CyanogenMod 9 RC1.
Now i'm stuck at the logo screen, the one with the name of the cellphone and can't get into Recovery mode, but i can get into the Download Mode.
How can i get my phone working again?
Any help will be aprecciated.
How about flashing a kernel (which supports CM9) for the correct device?
reflash the original kernal included in the CM9 thread that should restore your phone.
I'm now downloading the Samsung Drivers to try flash the Siyah Kernel for the SGS2 through the ODIN, i was just afraid that doing this could get the situation worse.
oinkylicious said:
How about flashing a kernel (which supports CM9) for the correct device?
Click to expand...
Click to collapse
Seriously, right? WTF?
Ahdriel said:
Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
Click to expand...
Click to collapse
Why did you think this would even remotely work? Would you actually try flashing a kernel meant for an SGS2 on an SGS?
Well, maybe you would...
I don't thinked that would work, but i haven't noticed it was for the SGS3 T_T
It was my fault, i need to pay more attention.
Flashed the right Siyah Kernel through the ODIN, phone working now
Thanks for all the help and sorry about my stupidity.
You know, i'm a noob (the video in the register form says that D
Thanks, cya.
Related
I've spent the last 2 days trying to fix my mistake. I have the GS2 ATT version, and I didn't realise there was a difference between that and the GTI9100 S2.
I wanted to give some tips I learned on how to recover your phone if you make this mistake.
First, here are some posts you'll want to look at:
http://forum.xda-developers.com/showthread.php?t=1286432 - Stock firwmware
http://forum.xda-developers.com/showthread.php?t=1285823 - Clockworkmod for the ATT
http://forum.xda-developers.com/showthread.php?t=1286192 - Cyanogenmod for our phones.
Using Odin and the stock firmware, you can recover your phone to a 95% working state. Once I got my stock firmware on there, I found that while making calls my phone made no sound, and the mic didn't work. The mic did work when I wasn't making calls though.
I reflashed the modem.bin file found on the stock firmware, not sure if its required but that is what I did first. Then, I unpacked the rooted stock firmware, and flashed JUST THE zImage file. After doing this, I rebooted, and my calls were working again.
After that, I installed the correct version of Clockworkmod, and then CM7 nightly. Now everything seems to be running great on my phone.
Hope this helps someone out there,
-Orbital
Good job thanx man.
Sent from my SAMSUNG-SGH-I777 using XDA App
Been awhile since I messed w/ android. I forgot about the different models myself until I realized I was spending half my day in the wrong section
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Alucardis666 said:
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Click to expand...
Click to collapse
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Alucardis666 said:
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Click to expand...
Click to collapse
Those are NOT for our version of the GS2, International only. Our version is here in the development forum.
Sent from my SGH-I777 using xda premium
Yes, it will return a status error 7 which means it's unmatched. Ask me how I know. I flashed international roms last night and used this fix to get me good again.
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
connexion2005 said:
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
Click to expand...
Click to collapse
The simple thing would be to change out the sec_touchkey.kl with rootexplorer and take the sec_touchkey from system/usr/keylayout should fix the i9100 rom to work with the i777. Seeing as how this worked for the Captivate *i897* for jvr, jvs, and jvt darkyrom releases and I would assume that it would work.
daraj said:
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
Click to expand...
Click to collapse
Personally I would think that you had a bad flash? Did you flash through Odin or CWM? From what I have been reading the gb bootloaders between the i777 and i9100 are different and I can see if you used a custom i9100 rom flashing via cwm could cause that. Since I am not too sure on the sgs2 if the differences between the euro models versus the carrier locked, the Kernel will not fix the button mapping, I learned this with the captivate when I switched over to using DarkyRom jvr and jvs builds since they were the most stable of GB for the i897 captivate. Plus if you are going to run a i9100 rom, I am sure the modem will not work with the att kernel. Especially if the situation with the cappy is any indication that att kernel needs att modem and i9000 kernel needs i9000 modem. I will be able to know more as soon as I get my i777 tomorrow.
HTH,
Charlie
Does anyone know how to remove the i9100 splash screen?
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
spbluffmaster said:
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
Click to expand...
Click to collapse
wipe data/factory reset
tried that three times... didnt help..
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
DiscipleDOC said:
Does anyone know how to remove the i9100 splash screen?
Click to expand...
Click to collapse
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1311975
re: get rid of i9100 boot logo
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
Use a download mode jig or flash entropy 512's stock TAR kernel with Odin from the link below.
http://forum.xda-developers.com/show....php?t=1286432
Good luck!
highaltitude said:
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
Click to expand...
Click to collapse
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Entropy512 said:
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Click to expand...
Click to collapse
i messed up and flashed an i9100 rom and am having the call prob u described. can i just flash the modem or stock rooted kernel and be back to 100%? if so do i use odin and do i need to check the box for repartition or anything like that? thx in advance!!!
hi what will hapen if i will flash SpeedMod on cm7?
speed10 said:
hi what will hapen if i will flash SpeedMod on cm7?
Click to expand...
Click to collapse
At best your phone will boot and be somewhat operational.
speed10 said:
hi what will hapen if i will flash SpeedMod on cm7?
Click to expand...
Click to collapse
Would be surprised if it even gets past the bootscreen. SpeedMod is a Samsung based Kernel, so will not work on AOSP based ROMS (CM7, MIUI, etc). This is explained in the OP on the SpeedMod thread.
Best case scenario it will boot loop, worst case it will soft brick. Diagnosis: Don't be an idiot.
Nothing will happen... and by that i mean the phone wont boot.
howdy,
I just got this i9100 with the kernel : 2.6.35.7-i9100XWKDD-CL161513 [email protected] #2.
I'd like to put cfroot and clockword etc.. on it but I got a little bit confused.
From what I understand I have to put a newer version kernel on it with similar name "XWKDD".
I tried to find a similar one in the chainfire thread http://forum.xda-developers.com/showthread.php?t=1103399 but i couldnt manage.
So basically my question is which kernel do I use if I want to put a miui or resurrection remix or any 4.1 ROM on it?
Can i just put this Dorimanx one on it via Odin? That seems to work with everything?!
http://forum.xda-developers.com/showthread.php?t=1617219
Also the phone is running stock 2.3.3, rooted but it doesnt have custom recovery.
One more thing if I put another another kernel on it, the I mentioned for example, will it still run the stock Gingerbread?
Thank you in advance
I recommend you to upgrade your phone to ICS, then flash custom kernel and ROM.
przemcio510 said:
I recommend you to upgrade your phone to ICS, then flash custom kernel and ROM.
Click to expand...
Click to collapse
Well I tried to update it with Kies, but the bloody thing just crashed on me so I'm pretty afraid of that evil program.
Can I upgrade the official ICS with Odin too?
Also if I do it with Odin is it enough if I only put the ROM on it? Does that update the kernel too (same for the kies if i try again with that, that updates the kernel too?)?
Btw i couldnt find a stock kernel with this code that mine has
elfboci said:
howdy,
I just got this i9100 with the kernel : 2.6.35.7-i9100XWKDD-CL161513 [email protected] #2.
I'd like to put cfroot and clockword etc.. on it but I got a little bit confused.
From what I understand I have to put a newer version kernel on it with similar name "XWKDD".
I tried to find a similar one in the chainfire thread but i couldnt manage.
So basically my question is which kernel do I use if I want to put a miui or resurrection remix or any 4.1 ROM on it?
Can i just put this Dorimanx one on it via Odin? That seems to work with everything?!
Also the phone is running stock 2.3.3, rooted but it doesnt have custom recovery.
One more thing if I put another another kernel on it, the I mentioned for example, will it still run the stock Gingerbread?
Thank you in advance
Click to expand...
Click to collapse
Siyah all the way for the S2
cypherrom666 said:
Siyah all the way for the S2
Click to expand...
Click to collapse
Siyah won't work on GB. you can upgrade to stock ICS via Odin. Download a 4.0.3 firmware for your device from sammobile.com and install via Odin. Then flash a custom kernel. For the ROMs you mentioned, siyah is preferable simply since dorimanx has a couple of versions. And determining which version will support which ROM might get a little confusing if you're just starting out. Just my opinion, start off wit siyah, then can switch over to dorimanx later when you figure out which versions support which ROMs.
Good luck. :thumbup:
EDIT: yes, just installing the ROM (firmware) is enough. It'll include the stock ICS kernel along with it.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Siyah won't work on GB. you can upgrade to stock ICS via Odin. Download a 4.0.3 firmware for your device from sammobile.com and install via Odin. Then flash a custom kernel. For the ROMs you mentioned, siyah is preferable simply since dorimanx has a couple of versions. And determining which version will support which ROM might get a little confusing if you're just starting out. Just my opinion, start off wit siyah, then can switch over to dorimanx later when you figure out which versions support which ROMs.
Good luck. :thumbup:
EDIT: yes, just installing the ROM (firmware) is enough. It'll include the stock ICS kernel along with it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I found the Siyah 4.1.5 kernel I assume this is it, http://www.gokhanmoral.com/gm/2012/09/08/siyahkernel-s2-v4-1/, does it put custom recovery and root on it automatically?
Yes.but first you'll have to be on ICS.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Yes.but first you'll have to be on ICS.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
does it matter which regional ICS i download? I mean, the guy i bought it from said its originally unlocked, but at boot UK O2 pops up /im not using O2 tho so it seems to be true, im just sayin .
Not so much. The only difference between firmwares for different regions is the modem. If after rooting you find your signal isn't as good as it was earlier, you can always flash a different modem at a later stage.
Sent from my GT-I9100 using xda app-developers app
Thanks for the help, worked like a charm <3
elfboci said:
Thanks for the help, worked like a charm <3
Click to expand...
Click to collapse
hmm after installing Resurrection remix, my PC just cant connect to the storage, even tho it recognizes it but it says cant find hardware identifier, it only says only samsung mobile usb composite device
USB debugging is turned on
ok so I have an unrooted galaxy s 2 I1900 running stock 4.0.4 and I was wondering to flash siyah on my device do I need a certain kernel or bassland version ?
Siyah ís a kernel... Just make sure you flash the right version. Information is available on www.gokhanmoral.com.
Sent from the Matrix
SamzWorldOfMusic said:
ok so I have an unrooted galaxy s 2 I1900 running stock 4.0.4 and I was wondering to flash siyah on my device do I need a certain kernel or bassland version ?
Click to expand...
Click to collapse
No, just flash Siyah v4 (.tar version) via ODIN. v5 also supports ICS but as far as I remember it had some issues.
ok well the kernel I want to flash is the newest for the galaxy s 2 (siyah v5.0.1) so am I ready to flash or is there anything I need to check or do first? BTW is there a possibility I can brick my phone because my mum won't be happy if I brick it
So what bugs does this kernel have that effects ics because im planning to do a nandroid backup then install cyanogen mod 10.1 jellybean?
SamzWorldOfMusic said:
ok well the kernel I want to flash is the newest for the galaxy s 2 (siyah v5.0.1) so am I ready to flash or is there anything I need to check or do first? BTW is there a possibility I can brick my phone because my mum won't be happy if I brick it
Click to expand...
Click to collapse
You can flash it with Odin. Read about it first, so you won't end up bricking it because you've missed something. But if you follow the correct steps you won't brick it.
SamzWorldOfMusic said:
So what bugs does this kernel have that effects ics because im planning to do a nandroid backup then install cyanogen mod 10.1 jellybean?
Click to expand...
Click to collapse
You can do a Nandroid back up after flashing Siyah. There won't be anything wrong with this back up.
Sent from the Matrix
ok im having thought because my first phone was a htc wildfire that I rooted and installed cyanogen mod without a problem
but when I got my htc one V I bricked it so im very cautious but shell I go for it and flash it now. also could you quickly tell me what part of odin will I put the file in (bootloader,PDA,Phone,CSC
SamzWorldOfMusic said:
ok im having thought because my first phone was a htc wildfire that I rooted and installed cyanogen mod without a problem
but when I got my htc one V I bricked it so im very cautious but shell I go for it and flash it now. also could you quickly tell me what part of odin will I put the file in (bootloader,PDA,Phone,CSC
Click to expand...
Click to collapse
PDA.
SamzWorldOfMusic said:
ok so I have an unrooted galaxy s 2 I1900 running stock 4.0.4 and I was wondering to flash siyah on my device do I need a certain kernel or bassland version ?
Click to expand...
Click to collapse
Make sure you dont perform and wipes or cleans before flashing siyaah kernal. Your on 4.0.4 ics which the stock kernal that has the brickbug. I repeat be careful not to wipe, clean or backup anything before you install siyaah kernal. After you have, then its all good mate. Good luck.
Sent from my GT-I9100 using xda premium
ok well from what I see I think il just wait for the jellybean update to be released in the uk but thanks guys il keep in mind for the future
I have flashed paranoidandroid 3.15 on my galaxy s3 a couple weeks ago, aside the occasional screen that win't turn on I haven't had any problem, but I set my mind on flashing a new kernel in order to be able to change thez governor. I tried to flash air kernel on, I did exactly what I was told: Boot into recovery, clear cache/delvik, installed kernel from sd card, and rebooted. But after the phone being rebooted, I still had the stock kernel.
My question is, why did this happen, and how do I fix it?
All help is appreciated
what recovery? link to the kernel?
Glebun said:
what recovery? link to the kernel?
Click to expand...
Click to collapse
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
vonniel said:
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
Click to expand...
Click to collapse
Kernel is for nexus s not galaxy s3
Sent from my GT-I9300 using xda premium
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Glenbun. Only mismatched, corrupted, or missing boot loaders can kill a phone.
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Glebun said:
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Click to expand...
Click to collapse
Glebun u have a point, even other incompatible components of recovery zip packages can brick the phone.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Glebun said:
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Click to expand...
Click to collapse
Wow, I feel so dumb ^^' I'll be more careful next time around.
What kernel would you recommend for me?
I recommed stock mb5 or speedmod k2-12 kernels for you
Bahadirafro said:
I recommed stock mb5 or speedmod k2-12 kernels for you
Click to expand...
Click to collapse
Well, I don't really know either of them, I don't mind stock, but I want to change things, sometimes it just isn't up for the task, or uses up battery when I would rather it didn't, without even knowing what they do, and looking around, I found the perseus kernel, I would like some opinions on the kernel, I would be very grateful if you told me if it fits me, if it's compatible with ParanoidAndroid, and finally if you have a better suggestion for a kernel.
http://forum.xda-developers.com/showthread.php?t=1691401
read the first post of the thread to find out if it's compatible with your ROM.
and try it to see if it suits you
If I'm running TWRP can I still download kernels that say they are meant for CWM?
yes