hi what will hapen if i will flash SpeedMod on cm7?
speed10 said:
hi what will hapen if i will flash SpeedMod on cm7?
Click to expand...
Click to collapse
At best your phone will boot and be somewhat operational.
speed10 said:
hi what will hapen if i will flash SpeedMod on cm7?
Click to expand...
Click to collapse
Would be surprised if it even gets past the bootscreen. SpeedMod is a Samsung based Kernel, so will not work on AOSP based ROMS (CM7, MIUI, etc). This is explained in the OP on the SpeedMod thread.
Best case scenario it will boot loop, worst case it will soft brick. Diagnosis: Don't be an idiot.
Nothing will happen... and by that i mean the phone wont boot.
Related
I have been trying to flash cm7 or miui on my sgs II ever since I got it but I can't! I either get bootloops or Kernel panic! I follow every step of every guide I can find 8 though i do not consider myself a noob). Am I missing something here?? Plz tell me you you gys flashed Miui or any cm7 based rom. Please
zemariaabreusantos said:
I have been trying to flash cm7 or miui on my sgs II ever since I got it but I can't! I either get bootloops or Kernel panic! I follow every step of every guide I can find 8 though i do not consider myself a noob). Am I missing something here?? Plz tell me you you gys flashed Miui or any cm7 based rom. Please
Click to expand...
Click to collapse
Sometimes it is necessary to flash it twice, meaning without reboot... Just stay in recovery and repeat the procedure (second time without /system wipe)
Sent from my GT-I9100 using xda premium
hofinho said:
Sometimes it is necessary to flash it twice, meaning without reboot... Just stay in recovery and repeat the procedure (second time without /system wipe)
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've tried that as well... nothing seems to work! Thanks anyway
You're 100% sure it's the GT-I9100/GT-I9100T? If it's anything other, that could explain it?
If you checked that you really have the right phone, install CM7 like always and right after it before you reboot the device, install siyahkernel. After it I guess it should work fine.
H-KaN said:
If you checked that you really have the right phone, install CM7 like always and right after it before you reboot the device, install siyahkernel. After it I guess it should work fine.
Click to expand...
Click to collapse
This, but if you're coming from stock, flash CyanogenMod twice (right after you install in CWM, repeat those same steps of wiping and flashing again).
screamworks said:
This, but if you're coming from stock, flash CyanogenMod twice (right after you install in CWM, repeat those same steps of wiping and flashing again).
Click to expand...
Click to collapse
Flashing CM7 is giving me Bootloops!
screamworks said:
You're 100% sure it's the GT-I9100/GT-I9100T? If it's anything other, that could explain it?
Click to expand...
Click to collapse
Yup 100% shure, even went to the box is sais GT-I9100
Some kernels work ons CM7 and Sammy roms?
H-KaN said:
If you checked that you really have the right phone, install CM7 like always and right after it before you reboot the device, install siyahkernel. After it I guess it should work fine.
Click to expand...
Click to collapse
I am a bout to make a noob question: Isn't the siyah kernel for sammy roms? It's just that I come from the galaxy s and there we had diferent kernels for CM7 and sammybased roms. But in the gs2 case some kernels work on both?
zemariaabreusantos said:
I am a bout to make a noob question: Isn't the siyah kernel for sammy roms? It's just that I come from the galaxy s and there we had diferent kernels for CM7 and sammybased roms. But in the gs2 case some kernels work on both?
Click to expand...
Click to collapse
siyah kernel is for sammy and aosp/cm/miui...try it...i had kernel error too and after installing this kernel RIGHT after installing cm twice it booted.
Thanks to all of you I will try what ebery one of you said. Hope it works!! D
ThANKS!!!!! Finally!!! I don't know what it was that did the trick (my guess is siyah kernel). But something worked here!! finally CM7!!! Seriously thanks a lot!!!!
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
why are you migrating yourself from no problems to problems,
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
amodj said:
Hi,
I am using CM 9 (14th April nightly build). I flashed Siyah's kernel 3.1rc4. Everything seems to work fine with it. But then I flashed the Speedmod kernel (K3-9).
Now when my phone boots, I don't see any boot animation and as soon as the lockscreen appears I get lots of "has stopped working popups" for various services (phone, acore etc etc) and the phone is basically un-usable.
I tried flashing CM 9 again, so that I get Codeworx's kernel. I flashed Speedmod over it but still the same problem
Anyone here facing/faced a similar issue ?
Thanks!
Click to expand...
Click to collapse
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
engloa said:
Yep, problems faced too.speedmod kernel just doesnt work for me,even when i was on gb
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Oh that is sad ! Speedmod was the best kernel that I had on GB. That is why I wanted to try out the ICS version.
zaheedahmed said:
why are you migrating yourself from no problems to problems,
Click to expand...
Click to collapse
Because I haven't found a sweet spot yet. That is why I am experimenting with different kernels.
zaheedahmed said:
forget the Kernel which is giving treble thats it...or you really want to know the reason ask in the speedmode kernel thread....
Click to expand...
Click to collapse
Will post in the speedmod thread. Just wanted to know if this was a generic problem with all kernels or just speedmod specific.
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
thracemerin said:
It says very clearly in the Speedmod thread that it works only on Samsung based firmwares. CM9, AOKP, etc... are not Samsung based firmwares, so not too surprisingly it doesn't work.
Click to expand...
Click to collapse
Whoops ! missed that ! Thanks a lot
Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
I was using the CyanogenMod 9 RC1.
Now i'm stuck at the logo screen, the one with the name of the cellphone and can't get into Recovery mode, but i can get into the Download Mode.
How can i get my phone working again?
Any help will be aprecciated.
How about flashing a kernel (which supports CM9) for the correct device?
reflash the original kernal included in the CM9 thread that should restore your phone.
I'm now downloading the Samsung Drivers to try flash the Siyah Kernel for the SGS2 through the ODIN, i was just afraid that doing this could get the situation worse.
oinkylicious said:
How about flashing a kernel (which supports CM9) for the correct device?
Click to expand...
Click to collapse
Seriously, right? WTF?
Ahdriel said:
Hi, i just flashed the Siyah Kernel v1.3.7beta for SGS3 on my SGS2.
Click to expand...
Click to collapse
Why did you think this would even remotely work? Would you actually try flashing a kernel meant for an SGS2 on an SGS?
Well, maybe you would...
I don't thinked that would work, but i haven't noticed it was for the SGS3 T_T
It was my fault, i need to pay more attention.
Flashed the right Siyah Kernel through the ODIN, phone working now
Thanks for all the help and sorry about my stupidity.
You know, i'm a noob (the video in the register form says that D
Thanks, cya.
i was flashing siyah kernel with odin and after flash phone rebooted got samsung logo screen and than nothing just black screen with blue led light and haptick keys on. i have no idea what is going on. please help
What Rom where you on and which version of siyah did you flash?
slaphead20 said:
What Rom where you on and which version of siyah did you flash?
Click to expand...
Click to collapse
android revolution hd 10.0 and siyah kernel 3.2.4 i also tried stock kernel but the same.somewhere i have seen that it may take up to ten minutes, but this is weird i get samsunt gt-i9300 logo then sound and then just black screen with blue light and haptick keys on
if I'm not mistaken that is an s2 kernel, where did you get it from?
slaphead20 said:
if I'm not mistaken that is an s2 kernel, where did you get it from?
Click to expand...
Click to collapse
http://rootgalaxys3iii.com/galaxy-s3-siyahkernel-s3-kernel/
the kernel posted there is 1.3.6, that is intended for ics Roms
slaphead20 said:
the kernel posted there is 1.3.6, that is intended for ics Roms
Click to expand...
Click to collapse
but i got the same with stock kernel. even if i try flash stock kernel i get the same. i also downloaded siyah kernel for jb 4.1.1 and doesn;t work.gonna try do restore and i see then
zbojnik65 said:
but i got the same with stock kernel. even if i try flash stock kernel i get the same. i also downloaded siyah kernel for jb 4.1.1 and doesn;t work.gonna try do restore and i see then
Click to expand...
Click to collapse
sorted with cwm
hello all seached around for this but got lost,ive just geared up dual boot jellybam primary and ics stock on secondary, what id like to know is if i8 flash another rom for secondary will it install its own kernal and make me loose siyah and dual boot setup? thanx anyone
xmanz said:
hello all seached around for this but got lost,ive just geared up dual boot jellybam primary and ics stock on secondary, what id like to know is if i8 flash another rom for secondary will it install its own kernal and make me loose siyah and dual boot setup? thanx anyone
Click to expand...
Click to collapse
No, your kernel won't be touched. Just make sure it's possible to flash the new second rom with the Siyah kernel you use right now.
Sent from the Matrix
thanx
Thank you for the answer btw any rom recommendations for siyah?
Donnie Sins said:
No, your kernel won't be touched. Just make sure it's possible to flash the new second rom with the Siyah kernel you use right now.
Sent from the Matrix
Click to expand...
Click to collapse
xmanz said:
Thank you for the answer btw any rom recommendations for siyah?
Click to expand...
Click to collapse
Well that obviously depends on which version of Siyah you want to use as they all support different bases.
You would be much better off finding a rom you like and then flashing the appropriate Siyah kernel for it. However you can start off on any kernel version you like as custom rom will replace with its own kernel anyway so just flash Siyah again afterwards.
Also please note that this type of question is not allowed for various reason.
http://forum.xda-developers.com/showthread.php?t=1612881
re rom
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
TheATHEiST said:
Well that obviously depends on which version of Siyah you want to use as they all support different bases.
You would be much better off finding a rom you like and then flashing the appropriate Siyah kernel for it. However you can start off on any kernel version you like as custom rom will replace with its own kernel anyway so just flash Siyah again afterwards.
Also please note that this type of question is not allowed for various reason.
http://forum.xda-developers.com/showthread.php?t=1612881
Click to expand...
Click to collapse
xmanz said:
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
Click to expand...
Click to collapse
Only of you flash it as first rom.
xmanz said:
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
Click to expand...
Click to collapse
Flashing another 1st rom will 'replace' your kernel. If you flash a new 2nd rom, the current kernel won't be replaced. Clear?
Sent from the Matrix
Ok got it very clear thanx
Donnie Sins said:
Flashing another 1st rom will 'replace' your kernel. If you flash a new 2nd rom, the current kernel won't be replaced. Clear?
Sent from the Matrix
Click to expand...
Click to collapse