[Q] Odin not working / phone able to get to download mode - Samsung Galaxy 5 I5500

Hi,
I tried to flash CWM onto my i5500 using Odin using the one package method. Odin detected the phone and I started the flash but it just went on and on showing no progress (30 minutes +). In the end I had to close it down.
I can still get into download mode, and Odin still detects the phone as connected, but I'm unable to flash anything, it just does the same as before. Odin does not display the phone's model at the top of the screen if that is a problem (just says "android"). If I try to turn the phone on it goes to the PC/orange triangle/phone screen.
Any ideas why Odin would not be able to flash anything like this and whether I need to do something different to get it out of this bricked state?
Thanks

Well, I've now tried on a windows XP machine and I got am error which was something along the lines of "could not open serial port: code 2". I swapped USB port and got the same result as when using windows 7 - just sits there forever saying it's "downloading recovery.img"
Is there a way I can flash the recovery using adb or something? Any help would be appreciated

Related

HELP!

I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.

Help Me Please.

Uh hi.
I'm a herp.
So I may have accidently tried to root and flash my friend's Samsung Vibrant. It was going smoohtly but now, I'm all sorts of messed up.
The problem: I may have used the wrong kernel (zImage) when using heimdall-frontend (which I downloaded from xda). This is causing the phone to power on; it shows the Samsung Galaxy S 4g load screen, then Overstock, then the T-Mo logo sign (with the music), and then a longer Galaxy S load screen. After the load screen, the screen goes completely black, but all the touch buttons light up. Once like this, I can turn it off, and make it go back into recovery mode and also download mode.
Please help. I've been trying to solve this with my friend for about.. 4 hours.
P.S. I've looked up all the guides for using ODIN to get back to JFS, none works due to the reason that when I put it back into download mode, the computer does not recognize it. But it does at the same time. (it shows the "safetly remove hardware" and says that is an "USB mass storage device" ((but does not appear in "My Computer" when in the unresponsive screen-- but when in the download screen, it shows the same thing, only labeled "SAMSUNG USB Composite Device", which also cannot be accessed through "My Computer")
P.P.S. I'm sure it is a Samsung Galaxy S Vibrant, exclusive from T-Mobile. My computer is Windows Vista 32-bit, and I have as many Samsung drivers as humanly possible when it comes to the Vibrant.
Can anyone help a poor fool?
Try this, get in to download mode, open Odin, then disconnect the usb cable, then reconnect the usb cable and Odin should recognize it then. Good luck!
Using XDA premium, you should be too!
johnny12times said:
Try this, get in to download mode, open Odin, then disconnect the usb cable, then reconnect the usb cable and Odin should recognize it then. Good luck!
Using XDA premium, you should be too!
Click to expand...
Click to collapse
Sorry. That did not work. It just doesn't recognize it in ODIN when in download mode. My computer doesn't even see it. But it does say "Safely Remove Hardware" -- "SAMSUNG USB Composite Device"
Sounds really odd. Do you have any roms you can try reflashing from recovery?
Using XDA premium, you should be too!
depaer said:
Uh hi.
I'm a herp.
So I may have accidently tried to root and flash my friend's Samsung Vibrant. It was going smoohtly but now, I'm all sorts of messed up.
The problem: I may have used the wrong kernel (zImage) when using heimdall-frontend (which I downloaded from xda). This is causing the phone to power on; it shows the Samsung Galaxy S 4g load screen, then Overstock, then the T-Mo logo sign (with the music), and then a longer Galaxy S load screen. After the load screen, the screen goes completely black, but all the touch buttons light up. Once like this, I can turn it off, and make it go back into recovery mode and also download mode.
Please help. I've been trying to solve this with my friend for about.. 4 hours.
P.S. I've looked up all the guides for using ODIN to get back to JFS, none works due to the reason that when I put it back into download mode, the computer does not recognize it. But it does at the same time. (it shows the "safetly remove hardware" and says that is an "USB mass storage device" ((but does not appear in "My Computer" when in the unresponsive screen-- but when in the download screen, it shows the same thing, only labeled "SAMSUNG USB Composite Device", which also cannot be accessed through "My Computer")
P.P.S. I'm sure it is a Samsung Galaxy S Vibrant, exclusive from T-Mobile. My computer is Windows Vista 32-bit, and I have as many Samsung drivers as humanly possible when it comes to the Vibrant.
Can anyone help a poor fool?
Click to expand...
Click to collapse
Sounds like you used the wrong odin files. if your screen is showing a galaxy s 4g logo then you must have mistakenly flashed a galaxy s 4g odin/heimdall package. on the back of your phone what is the model number. What on earth is JFS? ive heard of JFD which is the stock firmware that the phone shipped with.
If you flashed the wrong bootloader you are more or less stuck between a rock and a hardplace and will require a jtag. now the fact that teh screen does turn on is a good thing.
You need to keep trying to get it into download mode maybe try using a jig. Once youve gotten it into download mode try every single usb port you can find on your pc. When i need to odin i need to use one of my usb ports on the rear io panel none of the others will work. Once you get odin running and recognizing your device use the files posted in my sig as the odin files. any others and i cant help you cuz i dont know what your source is. Odin should be able to recover your device if it is still booting to the splash screen.
If for whatever reason you cant boot into download mode but can get into recovery here is what you do: make sure you have the android SDK installed (dont know what that is go here: http://developer.android.com/sdk/index.html and follow their directions) then open up command prompt while in recovery type the following command: adb reboot bootloader this should put you into download mode. If nothing ive mentioned works you may require a JTAG there is a company called MOBILETECHVIDEOS (http://mobiletechvideos.mybigcommerce.com/) that has a JTAG service.
Good luck
-Cheers

[Q] Sprint Galaxy Nexus Bricked? Help Please

I recently upgraded my radio for my Sprint Galaxy Nexus (toroplus), but i was unable to connect to the internet. I could make calls and send/receive texts, but no network connection. I decided to try to go back to stock. I saw a post saying to use odin to revert to stock. I ran it but go an error while it was flashing the cdma radio. It got stuck and wouldn't do anything, so i took out the battery. Now i cant get into download/odin mode or fastboot. The only thing that i seem to be able to do is connect back to odin, but it wont finish the process. When turning on the phone i only get a screen that has a phone to the left a monitor on the right and a triangle with an exclamation.
Has anyone had this problem and does anyone know how to get out of it?
I appreciate any help i can get.
Sprint Samsung Galaxy Nexus
SPHL700KIT
That screen you see is download mode. If your phone boots at all it is not bricked what so ever and can be recovered. Instead of using odin I would recommend having a look at doing it manually via adb and fastboot, that way you know exactly where something may have gone wrong. If you reflash the whole stock cdma img it should boot fine. Have a look in the GNexus dev section for info about fastboot and adb if required.
Sent from my Galaxy Nexus
Thanks, But its not download mode
I used download mode before,so i'm pretty sure its not it, unless their are two versions of it. I have tried using adb/fastboot, but when i do "fastboot devices" it doesnt even see it anymore.
Thanks for your quick response.
What screen are you on when you run the command adb devices? Recovery /download?
Sent from my Galaxy Nexus
neither. I cant get to either of them. they no longer work. Ive tried and tried to get to download, fastboot,& recovery, but all i can get to is the stupid error screen. I think somewhere in the process i corrupted/deleted them.
also my pc detects the phone as "samsung mobile usb cdc composite device" and "samsung mobile usb modem #2"

[Q] Samsung Young S6310N - CWM and ODIN

Hi, I have mistakenly flashed the wrong CWM to the Samsung Young running 4.1.2 I believe. This happened after i did a standard facory reset for family (phone was aready rooted) and after CWM kept on rebooting into CWM recover screen, tried recovery fix to no avail. so flashed another CWM via zip but I think that was for the samsung fame.
Phone is black screen, no image or recovery screen (working blind)
The phone can be seen by Windows device manager and it install the com port and the composite device and the normal sounds when the phone is disconnected and reconnected.
I have tried using ODIN (v.1.89 and 1.9) to put S6310N firmware back onto the phone (PDA, CSC and MODEM) but ODIN hangs at 'Setupconnection'
I run odin as admin, have tried different ports, cables, computer and taking battery out etc.ODIN shows 'Added' when i remove and reconnect so it can see it.
My question is does Odin have to be on the same port as the phone (mine shows 13 in Odin) but actual phone in windows 7 device manager is 12
I left ODIN for 30 mins but nothing changed.
Do I need the bootloader and pit file?
Would I need to adb (if thats now possible) to turn of usb debugging- could that be the problem?
I realise i'm now at the hard brick stage so any thoughts would be greatly appreciated

[Q] Download mode appears to not work? (Custom ROM)

I'm trying to flash my S3 International (i9300XXUGMK6) to Cyanogen Mod.
The phone currently is running stock jellybean but was rooted some time ago with SuperSU.
First i tried the installer from the CYMod site, all went OK until "Flashing recovery software". The phone went into download mode but eventually the laptop times out saying unable to connect to device. Phone needs rebooting to get control back.
Second time i tried http://wiki.cyanogenmod.org/w/Install_CM_for_i9300 instead.
Again instructions worked fine until the phone entered download mode. No "ding dong" USB noise from the computer and Heimdall exits with "ERROR:- Failed to detect compatible download mode device"
It seems at least as in download mode my phone wont "talk" to anything.
I've tried 2 different computers (laptop and desktop) and 2 different USB cables.
The phone works as normal in USB mode when not flashing ( to copy photos, view directories etc).
I've tried to redownload a stock firmware but i cant find a single working link now - they all use terraserver which 404s. I'm not even sure i can flash anyway as ODIN wont recognise the phone either with the same drivers off its site.
Any idea how to fix download mode or get it working so i can flash?

Categories

Resources