Hey guys!! I have a problem with set cpu... I had it set to 1516/384 with the profile for temp at 192/192 at 50 Celsius. It keeps just going to the temp profile and its nowhere near that hot. And ideas why or is there a better cpu program out there?
Sent from my HTC_Amaze_4G using xda app-developers app
Ya I always used set CPU but sometimes I don't know if it worked all the time. You should try using antutu CPU master. It's on the market try it out.
Sent from my HTC_Amaze_4G using xda app-developers app
coachmoore said:
Hey guys!! I have a problem with set cpu... I had it set to 1516/384 with the profile for temp at 192/192 at 50 Celsius. It keeps just going to the temp profile and its nowhere near that hot. And ideas why or is there a better cpu program out there?
Whenever I had problems with my setcpu I would uninstall and reinstall. Usually fixed the problem. U may also wanna redo your profiles or disable them to see if it's still actin up
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Related
I'm running fauxs kernel but I scaled it back to 1 ghz. However, when I select Time ib each state I notice that it's still going past that frequency, what am I doing wrong?
Sent from my MB860 using XDA App
i am having same issue, i think set cpu only kicks in after the boot.
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Anyone?
Sent from my MB860 using XDA App
?
10 char
do you have set on boot selected?
yeah 10char
IUH1991 said:
I rebooted and I still have the problem.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I meant to say setcpu only works after boot like cpu will be 1100 while booting after OS is loaded up setcpu gets super user permission and then scale cpu down.
If kernal has set clock to 1000 by defualt and only then it boots at 1000 and u can use setcpu to over clock it.
i guess old faux's 1.6 kernel was default 1000 new 1.7 is not.
ok folks lets debate this in detail witch
app is better for the atrix overall
ltdanno360 said:
ok folks lets debate this in detail witch
app is better for the atrix overall
Click to expand...
Click to collapse
+1 for SetCPU
frrst of all ever developer i have came across talks about using set cpu and it has specific version for xda community for free )try and top that )
2nd it has much more options then just over/under clocking and over/under volting.
3rd i havent found any problems with it yet so dont look for any other alternatives yet so hope this helps u with decision making.
+2 for SetCPU
Sent from my MB860 using XDA App
dag set cpu is popular i wonder why i have noticed less heat a huge differnce with cpu master
Sent from my MB860 using xda premium
+3 for set cpu
Joelesprod said:
+3 for set cpu
Click to expand...
Click to collapse
Make that +4
SetCpu pwns.
-Yo momma's so stupid she finds iOS complicated.-
I like setCPU but when I slide the max cpu to 1000 and I reopen setcpu it jumps to 1300... I tried CPU tuner today and it has scaling and gives you a ton of option settings. I going to try it out for a while.
Im using no-frills
Sent from my GT-S5570 using xda premium
I have tried both of those,but I have had better results and prefer the interface and options of System Tuner
I run the original cm7 rom with the infected kernel. I use set CPU to under clock/over clock to try to save battery but it constantly gets granted super user permission, and it will not sleep automatically. Any body know a way to fix this? Btw when I get rid of set CPU completely the battery life is worse...
Sent from my PG86100 using XDA App
Go into superuser options and turn off notifications. Problem solved!
Sent from my PG8610000 using xda premium
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
EniGmA1987 said:
You should not be using SetCPU with the "Infected" AnthraX kernels though. It doesnt work well. Try System Tuner or SysTune
Click to expand...
Click to collapse
+1 SetCPU doesn't play well with Anthrax kernels.
Thanks guys
Sent from my PG86100 using XDA App
Is there an app to view the Real CPU temp on the Note, and not from the batt sensor? I contacted System Tuner devs to find out why the their app does not show CPU temp, and here is the response.
" This means the CPU temperature is* not available on your phone or it's notsupported by the app. Note however that many* apps on Market pretends toprovide CPU temperature while they only provide battery temperature!If you want to check if your phone has such information available, you cansearch the content of the /sys folders and all its subfolders for a filecontaining 'temp' in its name. Note you should use an automated tool forthat, such as EStrong File Explorer."
Sent from my SAMSUNG-SGH-I717 using xda premium
Try Temp+CPU app. I have pro version, and this allows me set update interval to as low as 1 second.
diablo009 said:
Try Temp+CPU app. I have pro version, and this allows me set update interval to as low as 1 second.
Click to expand...
Click to collapse
Thanks, I'll give it a shot.
Kris
I tried the above app, and still no CPU temp reading. I do get batt temp reading(on every app I've tried). I have been reading and come to find out the Note may not have the CPU temp sensor. Can anyone confirm?
Sent from my SAMSUNG-SGH-I717 using xda premium
It works perfectly on mine. Its a widget though. Configure it to show reading too, in F or C, whatever you want.
Yes I tried and it shows a static -1c on mine. I wonder if it's kernel related? I read up on the issue and some say it needs to be activated at the kernel level or that the CPU temp diode is just not there.
I'm going to flash a stock kernel and test.
Sent from my SAMSUNG-SGH-I717 using xda premium
For me, it worked on stock, on Saurom, and on the latest Solaris prime, with all the kernels they bundled in.
I hope it's not a hardware issue with my note. I'm going to flash a different ROM, and test again.
Sent from my SAMSUNG-SGH-I717 using xda premium
Ok to test out I just bought the Temp+CPU app on my Infuse as well, and it doesn't show CPU temp either. Both phones show 31°F for CPU temp. Now in widget options when changing both phones to battery temp they work fine.
Sent from my SAMSUNG-SGH-I717 using xda premium
Galaxy Note CPU temperature
The Galaxy Note doesn't have a CPU temperature sensor.
javier24 said:
The Galaxy Note doesn't have a CPU temperature sensor.
Click to expand...
Click to collapse
Iirc both the note and the HP touchpad share similar if not the same processor...and the touchpad also doesn't show the temp. If it gets too hot it will just lock up and reboot. But its never gotten hot w/ overclocking
Sent from my SAMSUNG-SGH-I717 using XDA
Hey guys, I know we can underclock our CPU but has anyone found a good app to either increase the min frequency and have it actually stick? The only one I've found was System tuner by 3c but it only sticks for a bit and then either hangs or just plain doesn't work. I've found that keeping the min values at about 608mhz will stop just about all music skips for me. And yes I know this will kill my battery.
Sent from my MB870 using XDA
Sometimes I get lucky with ROM Toolbox's CPU settings. Set your minimum and reboot.
Sent from my Galaxy Nexus using Tapatalk 2
thelowend said:
Sometimes I get lucky with ROM Toolbox's CPU settings. Set your minimum and reboot.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Oh wow. I forgot to reboot! No frills CPU is working now. Thanks for kickstarting this thing I call a brain.
Sent from my MB870 using XDA
Ok I'm getting annoyed now, no frills CPU works BUT it kills itself minutes after I leave the app. Ill set the CPU to...lets say 1ghz min and Max it will show in system panel that indeed it is staying clocked at 1ghz and not fluctuating. Then ill go do something else on my phone, for example, browse the xda forums, I come back to system panel and its fluctuating again!!! Ive tried rebooting after setting the CPU min/Max but it will still do the same thing. Ive noticed that after i exit no frills it either goes into cached processes or it just stops and acts like i killed it, any ideas?
Edit: I wanna say its a superuser hang issue, I've tried supersu but it seems to hang as well but I'm open to peoples opinions.
Sent from my MB870 using XDA
Are you on cm7 or Eclipse?
Sent from my Galaxy Nexus using Tapatalk 2
Weird... I use Rom Toolbox Pro > Performance > SD Boost and it works every time for me! Running CM7 with superuser....supersu hangs like a mofo for me on cm7
Sent from my MB870 using XDA
thelowend said:
Are you on cm7 or Eclipse?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
CM7
Sent from my MB870 using XDA
Triscuit said:
CM7
Sent from my MB870 using XDA
Click to expand...
Click to collapse
OK. Lemme find my X2 and look around
Found it. Nandroiding to cm7.
Rom toolbox isn't working for me...3 FCs
Sent from my Galaxy Nexus using Tapatalk 2
Just testing to see if the settings would stick after setting them,then rebooting.
Sliders did but the CPU obviously didn't.
Sent from my MB870 using Tapatalk 2
thelowend said:
Just testing to see if the settings would stick after setting them,then rebooting.
Sliders did but the CPU obviously didn't.
Sent from my MB870 using Tapatalk 2
Click to expand...
Click to collapse
Yep same thing I'm getting, I'm wondering if there is an init.d script that could be made that would lock it at certain frequencies. That.....is out of my knowledge
Sent from my MB870 using XDA
sorry guys
this isn't possible
no matter how you try to set the min/max with ANY unit.d script or app, it just
will not stick.
at first it well seem like it's working for a few minutes. but then something happens and the kernel basically says "no that ain't gonna happen anymore" and kicks the min/max back to where it should be (the sliders in the apps won't move, but the actual system min/max and governor will be what it is supposed to be)
trust me, I've tried this from just about any angle fire the longest time.
sorry to be the bearer of bad news
Sent from my Galaxy Nexus using Tapatalk 2