[Q] ICS Rom wifi error - HTC EVO 3D

After flashing the recent ICS rom of different builder, I am not allow to connect to wifi. It just repeat turning off even press many times.
I am S-on device, is there any way to solve the problem by not getting S-off??
Thanks!:crying:

hi
goodenoughluis said:
After flashing the recent ICS rom of different builder, I am not allow to connect to wifi. It just repeat turning off even press many times.
I am S-on device, is there any way to solve the problem by not getting S-off??
Thanks!:crying:
Click to expand...
Click to collapse
Had the same problem before, flashed a taiwan rom on hk device
couldnt use wifi anymore, always getting error when i tried to turn it on
u can just flash the right wifi module and it will work again
there is a topic floating around about it
http://forum.xda-developers.com/showthread.php?t=1456855
hope this helps

Reboot phone or do a factoryvreset or installanother custom rom then u should be good to go
Hit the thanks button if i helped

chiao321 said:
Had the same problem before, flashed a taiwan rom on hk device
couldnt use wifi anymore, always getting error when i tried to turn it on
u can just flash the right wifi module and it will work again
there is a topic floating around about it
http://forum.xda-developers.com/showthread.php?t=1456855
hope this helps
Click to expand...
Click to collapse
I just flash the wifi module TWN .zip and it still remain error???
actually i think i am not install the firmware correctly since i am S-on.
Is there any way to install the firmware so that i can switch my wifi on?:crying:

R0M CHEF said:
Reboot phone or do a factoryvreset or installanother custom rom then u should be good to go
Hit the thanks button if i helped
Click to expand...
Click to collapse
I have tried these already:crying:

can anyone help me with this problem???:crying:
hard to use if the wifi is not working....:crying:

goodenoughluis said:
After flashing the recent ICS rom of different builder, I am not allow to connect to wifi. It just repeat turning off even press many times.
I am S-on device, is there any way to solve the problem by not getting S-off??
Thanks!:crying:
Click to expand...
Click to collapse
Maybe since you are s-on, the kernel did not flash correctly. This could cause Wi-Fi not to work, afaik. Maybe get s-off and then flash the Rom again.
Sent from my ICS 3VO with Tapatalk 2

Try an app called flash image GUI.
Here's a link read threw the whole thread to gain a better understanding
http://forum.xda-developers.com/showthread.php?t=1192527
Hopefully this helps.
#Root-Hack_Mod*Always\=LTE

hi
goodenoughluis said:
I just flash the wifi module TWN .zip and it still remain error???
actually i think i am not install the firmware correctly since i am S-on.
Is there any way to install the firmware so that i can switch my wifi on?:crying:
Click to expand...
Click to collapse
I also have s-on so thats not the biggest problem
the problem is finding the right wifi module for your device
i tried 2 different wifi modules and the second one happend to work for me
so get a wifi modul from a rom where wifi works for you
hope this helps

coal686 said:
Maybe since you are s-on, the kernel did not flash correctly. This could cause Wi-Fi not to work, afaik. Maybe get s-off and then flash the Rom again.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
anyway get the wifi works with S-on?? because S-off is difficult with my device version.

laie1472 said:
Try an app called flash image GUI.
Here's a link read threw the whole thread to gain a better understanding
http://forum.xda-developers.com/showthread.php?t=1192527
Hopefully this helps.
#Root-Hack_Mod*Always\=LTE
Click to expand...
Click to collapse
yes i have flash the custom kernel but it still not working.

chiao321 said:
I also have s-on so thats not the biggest problem
the problem is finding the right wifi module for your device
i tried 2 different wifi modules and the second one happend to work for me
so get a wifi modul from a rom where wifi works for you
hope this helps
Click to expand...
Click to collapse
Would you please tell me how to find the right wifi module???inside the zip file of the rom??
and how to flash it into my device???is that .img??fastboot adb method??

hi
goodenoughluis said:
Would you please tell me how to find the right wifi module???inside the zip file of the rom??
and how to flash it into my device???is that .img??fastboot adb method??
Click to expand...
Click to collapse
on the link i gave you everything is explained, but i believe there were 2 zips posted with 2 different wifi modules, 1 happend to work for me.
so i didnt had to extract it from a rom.
i flashed it with CWM recovery, just choose install zip from sd card, after wifi worked again.
used this wifi module on 2 different roms and it worked both times.
right now i installed stock rom for my device and waiting for ics to be finally released for hk devices. so no more need for me to fix wifi

goodenoughluis said:
yes i have flash the custom kernel but it still not working.
Click to expand...
Click to collapse
I could be wrong, but I read somewhere that Flash Image GUI does not flash the kernel correctly for ICS.

coal686 said:
I could be wrong, but I read somewhere that Flash Image GUI does not flash the kernel correctly for ICS.
Click to expand...
Click to collapse
yes i think so....anyway thanks for your help.

chiao321 said:
on the link i gave you everything is explained, but i believe there were 2 zips posted with 2 different wifi modules, 1 happend to work for me.
so i didnt had to extract it from a rom.
i flashed it with CWM recovery, just choose install zip from sd card, after wifi worked again.
used this wifi module on 2 different roms and it worked both times.
right now i installed stock rom for my device and waiting for ics to be finally released for hk devices. so no more need for me to fix wifi
Click to expand...
Click to collapse
Anyway....thanks for your help~Have a nice day~

Have you made sure its not your router ?
#Root-Hack_Mod*Always\=LTE

Related

[Q] Flickering screen after bootloader flash

Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
isimobile said:
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
Click to expand...
Click to collapse
Thank you very much. I will try this when i get home from work.
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
nicktaken said:
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
Click to expand...
Click to collapse
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
brusarp said:
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
Click to expand...
Click to collapse
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
nicktaken said:
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
Click to expand...
Click to collapse
:highfive: :good:
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
Got the same issue today after installing Task's ROM. The fix worked for me.. Thanks man.. :good:
nicktaken said:
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Click to expand...
Click to collapse
When you tried the fix noted above, I assume the screen didn't roll when you rebooted then into CWM recovery. At that point did you flash a ROM and THEN reboot to find the flicker after locking the screen, or did you do a reboot back into the same stock HC after flashing the bootloader and experience the problem?
I'm contemplating flashing this same bootloader because I have a rolling CWM5.5.0.4 right now and I want to stabilize it - but just so that I can root...not thinking about a ROM just yet...
Just to inform you all, i also had to flash a different bootloader after installing cm9 on my p7511, wich is in fact a 7510. For the records, pershoot made the new bootloader for exactly that issue, not backwards. But seems to work also.
What i deal now with, is that after flashing the uk ics for p7510 to my tab, the stock recovery doesn't recognize my sdcard. Can't mount sdcard...
Could be that a repartitioning with pit file will be necessary afterwards for us all.
Edit: thanks to the wise help of msedek, i know by now that my hind was totaly wrong. My mentioned point has to do with the Changes within stock recovery of ics, which have been made to prevent changes from there.
Getting more confident..
OK so it is sounding like this is definitely better. One more question:
I'm following the stickied root guide in General and that method uses CWM 4.0.0.4...I had reflashed that version. If I want to flash this boot loader should I flash 5.5.0.4 first? Or does it matter if I'm just trying to root right now?
EDIT: Flashed the bootloader which straightened out the recovery!! Successfully rooted after that. Downloaded root apps (ROM manager/Titanium/etc). Then turned off my screen - FLICKER CITY!
http://forum.xda-developers.com/showthread.php?t=1680738 <<< THIS fixed it. Load this kernel into the root of your tablet and flash it with CWM. Seems to have done the trick nicely and I'm exploring my newly rooted tab! My wife no longer wants to kill me either.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
This method don't work with new ICS firmware. I need a new kernel to work with new ICS firmware . I like the new firmware but i stuck with flickerscreen issue. Can sum 1 help ? Thanks.
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
KeyF said:
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
Click to expand...
Click to collapse
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Flicker screen after screen lock\timeout
djmatt604 said:
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Click to expand...
Click to collapse
I have the same problem on my P7500 3G and the minute i load the bootloader to fix CWM recovery rolling i get the screen flickering after lock screen.
Rom: ICS 4.0.4
Build Number: IMM76D.XXLQ8
BaseBand7500XXlQ8
Kernel: 3.1.10
Still stuck.
Hi guys,
Gtab 10.1 Wifi here. Fix didn't worked, somehow...
After installing official ics from Samsung and rooted, i had the same insane flicker issue. I followed this thread - http://forum.xda-developers.com/showthread.php?t=1680738 - , flashed new kernel, and now i cant pass Samsung Galaxy Tab logo for some reason, not even past half an hour.
Im in a dead end, even tried installing back CM9 but it also wont pass the splashing blue screen.
Any ideas?
cheers!
EDIT : After some reboots, finally managed to boot into ICS (CM9) but now i was pushed back to the step 1, where I don't have a working camera, but I have root access and non official ICS from Cyanogen. I am afraid re-doing all my work and get stuck again in the scrambled screen after it updates the kernel..
I'm I missing something, guys?
Hi there!
Are you still having problems?does this guide here work for you?:
http://forum.xda-developers.com/showthread.php?t=1555984
I've found something,the kernel flash package changes our devices' WiFi driver,that's why it doesn't work.
sorry for not giving a fix until tomorrow,it's sleep time here,I know my excuse will be accepted because you all care for basic human needs...
But please inform me if that guide(Pershoot's) has fixed your problem,thanks for that
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
reXbeer said:
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
Click to expand...
Click to collapse
Hey guys i solve my problem today i desided to solve it anyway and now i am free from this **** ....
i just go to http://droidbasement.com/galaxy/roms/cm10/p4/ and download
bootloader.tar.md5
latest recovery.tar.md5
cm-10-20121112-EXPERIMENTAL-p4.zip
but before start anything first i format my tab memory then restart in download mode install bootloader.tar.md5 and recovery.tar.md5 ... volla ... reboot in recovery mode volla thats it all is now working perfect .... then i install cm-10-20121112-EXPERIMENTAL-p4.zip now my tab is free on madness ...
must try but first fully clean your tab ...
iff its really work then click on thanks button ...

Wifi wont turn on

i 've got an amaze 4g t-mobile recently.it works perfectly.but then,i updated to ICS through OTA...
Everything work fine except Wifi,i cant turn on wifi at all.It only show error when i try to turning on ...
I did search the whole forums,trying everthing i can do..unlock boot loader/rooted/s-off/flash 4EXT recovery/flash many cook rom (android revolution,fastrom,energy rom..),kernel(ruby-faux123 v007/v008/v015/v016..)
finally i reverted back to Stock GB with "PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed".
but wifi still shows ''error'' at all,when i try to turning on hotspot ,the phone force to reset .
currently:
Stock GB:2.3.4
Sense:3.0
Kernel:2.3.35.13 build 144#1
Baseband:1.08.550L.19DC_30.66.550L.08D
Buildnumber:1.43.531.3
Bootloader unlocked and s-off.
Hoping there is anyone else can understand my bad english and help me .
Since you're s-off try updating back to ics via the most recent file in the stock ruu thread and see if it resolves it.
sent from a smooth place where my fingers trace across the screen to see your face and make you scream!
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
ronaldinho_07 said:
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
Click to expand...
Click to collapse
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Dark Nightmare said:
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Click to expand...
Click to collapse
as you have said,i just flashed the above kernel (Amaze-EKF-009b-sense.zip) into stock GB,but wifi error is still there
after that,i updated to ICS via RUU and flashed this kernel from here : http://forum.xda-developers.com/showthread.php?t=1362759 (at #5)
Nothing changes.
at the first time,i have flashed the Amaze ICS(v015) kernel via 4EXT touch recovery,flashed kernel successfully .
(http://forum.xda-developers.com/showthread.php?t=1359951)
but i think i go wrong somewhere,because the following instruction said:
CWM Flash Instructions: (NO LONGER SUPPORTING CWM METHOD DUE TO HTC's STUPID S-ON UNLOCK!!!)
1. Copy file to SDcard
2. Reboot to CWM recovery
3. Flash the Zip file (if you noticed an error, Flash the same file the 2nd time)
4. Reboot, Done!
i read carefully the second way
Easy Kernel Flasher Instructions:
1. download the above file (via phone directly or to a PC)
2. unzip to a folder then depends on PC or Linux
[ Windows ] open command prompt window and type Flash.bat
[ Linux ] open terminal window and type ./Flash.sh (make sure permission is set to 755 for the Flash.sh)
3. Let the script complete!
,downloaded the kernel,extracted into a folder on my pc.
but i dont see any "Flash.bat'' and dont know how to flash it.
but in the folder that i've just extracted.i found two file:
wl12xx.ko and wl12xx_sdio.ko
putting the whole folder modules into the this kernel (http://forum.xda-developers.com/showthread.php?t=1362759) and run flash.bat...
after flashing,both wifi and bluetooth broken
when i try to turning them on,they turn off instantly
//sorry sir for the bad english
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Keylogger_0 said:
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Click to expand...
Click to collapse
thanks sir,i'll try
btw,i try to flashing faux123-kernel via CWM recovery,but i's aborted
then,i force to flash faux123-kernel via 4EXT touch recovery and succeed
but i still cant turn on wifi,it just says error
can anyone give me an advise,pls
That memory block is probably damaged.
sent from a galaxy you'll never see.
do you think it's related to wifi hardware issues
ronaldinho_07 said:
do you think it's related to wifi hardware issues
Click to expand...
Click to collapse
It could be that as well, did you call tmo and tell em about it?
Dark Nightmare said:
It could be that as well, did you call tmo and tell em about it?
Click to expand...
Click to collapse
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
ronaldinho_07 said:
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
Click to expand...
Click to collapse
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
ronaldinho_07 said:
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
Click to expand...
Click to collapse
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
thanks so much
nice day sir,and i have to go to bed ,it's 3h40 AM in vietnam
//updated.
after flashing many times,problem solved
Necro'd.
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
Click to expand...
Click to collapse
Anyone have any info as to how or where to repair the wifi chip on the amaze? I'm having the same problem and am quite certain that is it hardware issue as the problem started after dropping the phone and without flashing or changing anything, fixing permissions and flashing stock RUU's, kernels, etc of no help. Hoping that something is possible, would be great if it was as simple as a loose ribbon cable...
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
spencerjang said:
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
Click to expand...
Click to collapse
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
ravike14 said:
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
spencerjang said:
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
Click to expand...
Click to collapse
Why it failed? The error?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app

[Q] Numerous problems with Stock JB update

Okay, so I have attempted to update OTA my rooted/unlocked LGOG. It failes about 3% into the update and states it was "unable to update" no details. I tried restoring and unlocking, which caused a kernel crash on every boot up. I finally got it back down to 10o, used the stock ROM posted here to flash to 11c, then again up to Stock JB. Everything again appeared to work until I tried to flash the radio image. It failed every time and made it impossible to connect to wifi or receive most phone calls. I've searched the forums and although I see similar issues, none of the advice has worked for me.
I assume I must be just missing some obvious step or something. Any ideas?
Are you not able to use the flashable ZIP Snow posted here?
http://forum.xda-developers.com/showthread.php?t=2067871
OMGMatrix said:
Are you not able to use the flashable ZIP Snow posted here?
http://forum.xda-developers.com/showthread.php?t=2067871
Click to expand...
Click to collapse
That method does work, I just can't successfully install the radio. Is there any trick to that that's different than any other flash?
nonobjective said:
That method does work, I just can't successfully install the radio. Is there any trick to that that's different than any other flash?
Click to expand...
Click to collapse
Which recovery and version of it are you using to flash the radio?
nonobjective said:
That method does work, I just can't successfully install the radio. Is there any trick to that that's different than any other flash?
Click to expand...
Click to collapse
What actually happens when you try to flash the radio?
It sounds like you just got a bad download for the radio file.
uns0undl0gic said:
Which recovery and version of it are you using to flash the radio?
Click to expand...
Click to collapse
Radio: cwm-ATTJB-Radio
Recovery: TWRP 2.4.3
Does the radio zip require CWM for installation? I may have answered my own question by actually paying attention to the filename.
No. TWRP worked fine for me. Try download radio file and flash again.
ilyukha13 said:
No. TWRP worked fine for me. Try download radio file and flash again.
Click to expand...
Click to collapse
SOLVED - finally.
Removing the SD card fixed whatever glitch was causing the failure. Reinstalled the card and all is well. I am having trouble restoring app backups, but I can live with that. Thanks for everyone's help!

[Q] amaze showing no signal

hi,
well, my amaze was running very smooth.. i was using super sense and all was good, i decided to flash the source build pacman,after flashing the ROM i didn't get any good battery so i flash viper 1.6.7 because of its great battery life... after booting the ROM i just realize that my phone is not showing any network signals... after messing with it for some time i decided to start from the scratch so i downloaded RUBY_ICS_35_S_TMOUS_2.14.531.3_R2_Radio_1.14.550L.17DC_30.78.550L.15_release_262141_signed_13.zip, renamed it ph85img,put it to the root of my ext sd card, pulled my battery and rebooted it into the boot loader, fastboot auto detect it and started flashing, after the update phone still was not showing any signals, but when i activate and deactivate airplane mode, signals just came from nowhere just for 10 seconds and then got vanished, i flashed recovery and then rooted my phone and again flash viper ver 1.7.1 but the result is still the same... on/off airplane works but only for 10 seconds...i also cleaned out the back antenna connectors but no luck... :crying:
i am so confused right now as i do not know what is the problem ...is this somewhat related to the radio? i don't know . .
i hope you guys will help me to find out and solve this problem..
i have unlocked bootloader, s-off, supercid, 4ext recovery, any my hboot version is 1.93.2222..
please help me guys... and sorry for my bad english..
@ravike14, @SuperAfnan ....
Retrace your steps
carbon_guy said:
hi,
well, my amaze was running very smooth.. i was using super sense and all was good, i decided to flash the source build pacman,after flashing the ROM i didn't get any good battery so i flash viper 1.6.7 because of its great battery life... after booting the ROM i just realize that my phone is not showing any network signals... after messing with it for some time i decided to start from the scratch so i downloaded RUBY_ICS_35_S_TMOUS_2.14.531.3_R2_Radio_1.14.550L.17DC_30.78.550L.15_release_262141_signed_13.zip, renamed it ph85img,put it to the root of my ext sd card, pulled my battery and rebooted it into the boot loader, fastboot auto detect it and started flashing, after the update phone still was not showing any signals, but when i activate and deactivate airplane mode, signals just came from nowhere just for 10 seconds and then got vanished, i flashed recovery and then rooted my phone and again flash viper ver 1.7.1 but the result is still the same... on/off airplane works but only for 10 seconds...i also cleaned out the back antenna connectors but no luck... :crying:
i am so confused right now as i do not know what is the problem ...is this somewhat related to the radio? i don't know . .
i hope you guys will help me to find out and solve this problem..
i have unlocked bootloader, s-off, supercid, 4ext recovery, any my hboot version is 1.93.2222..
please help me guys... and sorry for my bad english..
Click to expand...
Click to collapse
@carbon_guy
Can you try and flash PACman, and see if the IMEI gets restored? If it doesn't, flash Super Sense again. Hopefully that will restore it. :good:
Unfortunately, flashing does go wrong sometimes. It is definitely possible to lose an IMEI, but you *could* get it back if you retrace your steps! Some guy lost his IMEI because of Google Talk, but got it back by retracing his steps on another thread.
SuperAfnan said:
@carbon_guy
Can you try and flash PACman, and see if the IMEI gets restored? If it doesn't, flash Super Sense again. Hopefully that will restore it. :good:
Unfortunately, flashing does go wrong sometimes. It is definitely possible to lose an IMEI, but you *could* get it back if you retrace your steps! Some guy lost his IMEI because of Google Talk, but got it back by retracing his steps on another thread.
Click to expand...
Click to collapse
i will,
and then i will post the results, thanks for your precious reply..
carbon_guy said:
i will,
and then i will post the results, thanks for your precious reply..
Click to expand...
Click to collapse
Wow I didn't know you guys were camping out waiting for me.
If it DOESN'T work, then you should bring it back to bone stock by flashing a RUU, hide the "Re-locked" status by using scotty's mod bureied in the dev section, and send it to HTC for repairs, or claim warranty.
Sometimes flashing random ROMs *may restore it, but that might be unlikely. Good luck! :fingers-crossed:
SuperAfnan said:
Wow I didn't know you guys were camping out waiting for me.
If it DOESN'T work, then you should bring it back to bone stock by flashing a RUU, hide the "Re-locked" status by using scotty's mod bureied in the dev section, and send it to HTC for repairs, or claim warranty.
Sometimes flashing random ROMs *may restore it, but that might be unlikely. Good luck! :fingers-crossed:
Click to expand...
Click to collapse
i just flashed pacman but the result is the same...
what should i do... should i try to flash super sense...?
i heard in forums that this problem is also relate to a bad radio...so what about it ?
carbon_guy said:
i just flashed pacman but the result is the same...
what should i do... should i try to flash super sense...?
i heard in forums that this problem is also relate to a bad radio...so what about it ?
Click to expand...
Click to collapse
Flash super sense, then perhaps you can try to flash the radio. :good:
SuperAfnan said:
Flash super sense, then perhaps you can try to flash the radio. :good:
Click to expand...
Click to collapse
i am on it...
SuperAfnan said:
Flash super sense, then perhaps you can try to flash the radio. :good:
Click to expand...
Click to collapse
just flashed super sense... no luck.. :crying:
so what about the radio... how could i flash one?
carbon_guy said:
just flashed super sense... no luck.. :crying:
so what about the radio... how could i flash one?
Click to expand...
Click to collapse
Here's the link to jordin's radio he pulled from the OTA.
http://forum.xda-developers.com/showthread.php?p=39820467#post39820467
http://www.mediafire.com/download/nw0qhkjhthsekji/PH85IMG.zip
Put it on your external_sd and run it in the bootloader. Let's see if it works/ :fingers-crossed:
SuperAfnan said:
Here's the link to jordin's radio he pulled from the OTA.
http://forum.xda-developers.com/showthread.php?p=39820467#post39820467
http://www.mediafire.com/download/nw0qhkjhthsekji/PH85IMG.zip
Put it on your external_sd and run it in the bootloader. Let's see if it works/ :fingers-crossed:
Click to expand...
Click to collapse
flashed it...still the same... and now even airplane on/off stopped working..
carbon_guy said:
flashed it...still the same... and now even airplane on/off stopped working..
Click to expand...
Click to collapse
You may need to flash the T-Mobile OTA.
Did you use hangouts or talk by any chance?
Sent from my SGH-T999 using Tapatalk
SuperAfnan said:
You may need to flash the T-Mobile OTA.
Did you use hangouts or talk by any chance?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
nop...never used on my amaze...
carbon_guy said:
nop...never used on my amaze...
Click to expand...
Click to collapse
If everything fails, go back to bone stock and flash the RUU.
If that fails, you may need to call your carrier, or send it to a HTC repair center.
Sent from my SGH-T999 using Tapatalk
SuperAfnan said:
If everything fails, go back to bone stock and flash the RUU.
If that fails, you may need to call your carrier, or send it to a HTC repair center.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
hmmm... thanks for your efforts man, could you please point out that which RUU or OTA i should flash..
carbon_guy said:
hmmm... thanks for your efforts man, could you please point out that which RUU or OTA i should flash..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1617644
Use the T-mobile one, since it's the most used. If there was an international RUU, that'd be great, but there isn't, unfortunately.
SuperAfnan said:
http://forum.xda-developers.com/showthread.php?t=1617644
Use the T-mobile one, since it's the most used. If there was an international RUU, that'd be great, but there isn't, unfortunately.
Click to expand...
Click to collapse
how about this one...
OTA_RUBY_ICS_35_S_TMOUS_2.14.531.3-1.43.531.3_release_259660ggzpa27mj01s2ayu.zip
carbon_guy said:
how about this one...
OTA_RUBY_ICS_35_S_TMOUS_2.14.531.3-1.43.531.3_release_259660ggzpa27mj01s2ayu.zip
Click to expand...
Click to collapse
Yes just flash it. I can't guarantee anything though because nobody ever found a cure for IMEI's being erased on the amaze. But on the s3, odining to stock usually fixed it.
Sent from my SGH-T999 using Tapatalk
SuperAfnan said:
Yes just flash it. I can't guarantee anything though because nobody ever found a cure for IMEI's being erased on the amaze. But on the s3, odining to stock usually fixed it.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
bootloader detected it, started to loading it and then parsing and then came back to normal...didn't flash it, i am supercid and s-off, do i have to relock bootloader in order to flash this OTA?
carbon_guy said:
bootloader detected it, started to loading it and then parsing and then came back to normal...didn't flash it, i am supercid and s-off, do i have to relock bootloader in order to flash this OTA?
Click to expand...
Click to collapse
You might have to.
Look up a fastboot tutorial, you will need to type in "fastboot oem lock" using command prompt in the sdk folder. You should look up a tutorial or guide on how to do this because it's going to take too long to explain in one thread.
Once your boot loader is relocked, proceed to the RUU. If this ruu fails to restore signal, I'm out of ideas. Sorry @carbon_guy.
Sent from my SGH-T999 using Tapatalk

Help Needed with Sense 6 OTA update

I've unlocked my bootloader, rooted and installed CWM custom recovery. Not surprisingly the Sense 6 update will download but it won't install. I tried to flash it manually with CWM but that won't work either. Again, no surprise.
Is there a workaround that I can use to install the Sense 6 update?
appro77 said:
I've unlocked my bootloader, rooted and installed CWM custom recovery. Not surprisingly the Sense 6 update will download but it won't install. I tried to flash it manually with CWM but that won't work either. Again, no surprise.
Is there a workaround that I can use to install the Sense 6 update?
Click to expand...
Click to collapse
Yes, you need the stock recovery not custom recovery to install the ota plus stock rom installed.
jerrycycle said:
Yes, you need the stock recovery not custom recovery to install the ota plus stock rom installed.
Click to expand...
Click to collapse
Ok, I flashed stock recovery and the update looked like it was going to install but it failed about a third of the way through and gave me a red triangle. I rebooted and fortunately the phone is still working. I tried installing the update a second time with the same result. Any ideas?
appro77 said:
Ok, I flashed stock recovery and the update looked like it was going to install but it failed about a third of the way through and gave me a red triangle. I rebooted and fortunately the phone is still working. I tried installing the update a second time with the same result. Any ideas?
Click to expand...
Click to collapse
You have to have a pure stock rom. You may have to nandroid a stock or RUU but you have to decide that, but it have to be stock not root or any system file edits. Sorry, missed the bootloader need to be locked.
jerrycycle said:
You have to have a pure stock rom. You may have to nandroid a stock or RUU but you have to decide that, but it have to be stock not root or any system file edits. Sorry, missed the bootloader need to be locked.
Click to expand...
Click to collapse
My rom is stock (Telstra Australia) but I've installed a few Xposed mods. If I do a factory reset I'm assuming that will take the rom back to stock. If I then remove root and relock the bootloader will I then be ok to flash the Sense 6 update?
Mate, I'm having same issue, Telstra Australia.
Check out his thread. I think you need to save three files that get wiped when you unlock bootloader. The update looks for them. I'm still trying to get it to work.
http://forum.xda-developers.com/showthread.php?t=2800140
Cjohn1200 said:
Mate, I'm having same issue, Telstra Australia.
Check out his thread. I think you need to save three files that get wiped when you unlock bootloader. The update looks for them. I'm still trying to get it to work.
http://forum.xda-developers.com/showthread.php?t=2800140
Click to expand...
Click to collapse
Thanks. I tried the 3 files thing and it didn't work for me probably because the bootloader was still unlocked. I got sick of dicking around with it and decided to try to get S-off which I'd been having trouble achieving with Hboot 2.49. Finally got S-off and then flashed this.... http://forum.xda-developers.com/showthread.php?p=53890999
Cheers.
appro77 said:
My rom is stock (Telstra Australia) but I've installed a few Xposed mods. If I do a factory reset I'm assuming that will take the rom back to stock. If I then remove root and relock the bootloader will I then be ok to flash the Sense 6 update?
Click to expand...
Click to collapse
appro77 said:
Thanks. I tried the 3 files thing and it didn't work for me probably because the bootloader was still unlocked. I got sick of dicking around with it and decided to try to get S-off which I'd been having trouble achieving with Hboot 2.49. Finally got S-off and then flashed this.... http://forum.xda-developers.com/showthread.php?p=53890999
Cheers.
Click to expand...
Click to collapse
Which method did you use to gain s-off? I couldn't get it to work.
Cjohn1200 said:
Which method did you use to gain s-off? I couldn't get it to work.
Click to expand...
Click to collapse
Nothing was working for me and I'd almost given up but I was pointed to this.... http://firewater-soff.com/instructions/
I was already rooted but for some reason the first method wouldn't work for me. ADB is very new to me so I may have done something wrong even though I tried it a couple of times. I used the second method but didn't use temproot cause I figured as I was already rooted I didn't need it. When I used the commands in the second method S-off was achieved.
The rom I mentioned above looks really good btw.
Cjohn1200 said:
Which method did you use to gain s-off? I couldn't get it to work.
Click to expand...
Click to collapse
appro77 said:
Nothing was working for me and I'd almost given up but I was pointed to this.... http://firewater-soff.com/instructions/
I was already rooted but for some reason the first method wouldn't work for me. ADB is very new to me so I may have done something wrong even though I tried it a couple of times. I used the second method but didn't use temproot cause I figured as I was already rooted I didn't need it. When I used the commands in the second method S-off was achieved.
The rom I mentioned above looks really good btw.
Click to expand...
Click to collapse
Yeah it does look pretty slick. Wasn't sure about the large icons through. I watched a review on youtube. Looked a little strange...
Cjohn1200 said:
Yeah it does look pretty slick. Wasn't sure about the large icons through. I watched a review on youtube. Looked a little strange...
Click to expand...
Click to collapse
Not sure what you are referring to there. I didn't see anything overly large. Was that on the stock launcher? I'm using Apex.
When the OTA update fails and you get the red triangle, have you tried holding the vol up button then pushing the power button?
This should take you to stock recovery and you can see why the update failed...
Might give you a point to work from.
Cjohn1200 said:
When the OTA update fails and you get the red triangle, have you tried holding the vol up button then pushing the power button?
This should take you to stock recovery and you can see why the update failed...
Might give you a point to work from.
Click to expand...
Click to collapse
No I didn't do that. I'm on a custom recovery and custom rom now though.
I'm all back to stock with the three files saved. Just waiting for the OTA update to download now.
I'll let you know if it works.
So what's the sense 6 camera app like? I have never really been happy with the camera on the max.
Cjohn1200 said:
So what's the sense 6 camera app like? I have never really been happy with the camera on the max.
Click to expand...
Click to collapse
I haven't had a really good look at it but I don't like the fact that you have to tap a button before you choose video. On the old app both camera and video were one tap away. Now if you aren't in video already it's 2 taps.
appro77 said:
No I didn't do that. I'm on a custom recovery and custom rom now though.
Click to expand...
Click to collapse
I ended up getting this to work....
When you save the three files that are missing with a root file manager, you have to save them to \data\preload NOT system\data\preload
Worked a treat after I did this:good:
How did you get firewater to work?
I keep getting a kernel error. It says that my kernel has a anti firewater patch. Very frustrating i just want to be able to lock my bootloader so my finger print scanner works properly again.
Cjohn1200 said:
I ended up getting this to work....
When you save the three files that are missing with a root file manager, you have to save them to \data\preload NOT system\data\preload
Worked a treat after I did this:good:
How did you get firewater to work?
I keep getting a kernel error. It says that my kernel has a anti firewater patch. Very frustrating i just want to be able to lock my bootloader so my finger print scanner works properly again.
Click to expand...
Click to collapse
That's interesting what you say about the 3 files. Now I know why it wouldn't work for me. Regarding Firewater I just followed the instructions in the link I posted earlier.
I've actually reverted to a Nandroid of my stock Sense 5.5 rom. I like it better than Sense 6.

Categories

Resources