Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
isimobile said:
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
Click to expand...
Click to collapse
Thank you very much. I will try this when i get home from work.
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
nicktaken said:
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
Click to expand...
Click to collapse
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
brusarp said:
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
Click to expand...
Click to collapse
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
nicktaken said:
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
Click to expand...
Click to collapse
:highfive: :good:
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
Got the same issue today after installing Task's ROM. The fix worked for me.. Thanks man.. :good:
nicktaken said:
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Click to expand...
Click to collapse
When you tried the fix noted above, I assume the screen didn't roll when you rebooted then into CWM recovery. At that point did you flash a ROM and THEN reboot to find the flicker after locking the screen, or did you do a reboot back into the same stock HC after flashing the bootloader and experience the problem?
I'm contemplating flashing this same bootloader because I have a rolling CWM5.5.0.4 right now and I want to stabilize it - but just so that I can root...not thinking about a ROM just yet...
Just to inform you all, i also had to flash a different bootloader after installing cm9 on my p7511, wich is in fact a 7510. For the records, pershoot made the new bootloader for exactly that issue, not backwards. But seems to work also.
What i deal now with, is that after flashing the uk ics for p7510 to my tab, the stock recovery doesn't recognize my sdcard. Can't mount sdcard...
Could be that a repartitioning with pit file will be necessary afterwards for us all.
Edit: thanks to the wise help of msedek, i know by now that my hind was totaly wrong. My mentioned point has to do with the Changes within stock recovery of ics, which have been made to prevent changes from there.
Getting more confident..
OK so it is sounding like this is definitely better. One more question:
I'm following the stickied root guide in General and that method uses CWM 4.0.0.4...I had reflashed that version. If I want to flash this boot loader should I flash 5.5.0.4 first? Or does it matter if I'm just trying to root right now?
EDIT: Flashed the bootloader which straightened out the recovery!! Successfully rooted after that. Downloaded root apps (ROM manager/Titanium/etc). Then turned off my screen - FLICKER CITY!
http://forum.xda-developers.com/showthread.php?t=1680738 <<< THIS fixed it. Load this kernel into the root of your tablet and flash it with CWM. Seems to have done the trick nicely and I'm exploring my newly rooted tab! My wife no longer wants to kill me either.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
This method don't work with new ICS firmware. I need a new kernel to work with new ICS firmware . I like the new firmware but i stuck with flickerscreen issue. Can sum 1 help ? Thanks.
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
KeyF said:
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
Click to expand...
Click to collapse
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Flicker screen after screen lock\timeout
djmatt604 said:
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Click to expand...
Click to collapse
I have the same problem on my P7500 3G and the minute i load the bootloader to fix CWM recovery rolling i get the screen flickering after lock screen.
Rom: ICS 4.0.4
Build Number: IMM76D.XXLQ8
BaseBand7500XXlQ8
Kernel: 3.1.10
Still stuck.
Hi guys,
Gtab 10.1 Wifi here. Fix didn't worked, somehow...
After installing official ics from Samsung and rooted, i had the same insane flicker issue. I followed this thread - http://forum.xda-developers.com/showthread.php?t=1680738 - , flashed new kernel, and now i cant pass Samsung Galaxy Tab logo for some reason, not even past half an hour.
Im in a dead end, even tried installing back CM9 but it also wont pass the splashing blue screen.
Any ideas?
cheers!
EDIT : After some reboots, finally managed to boot into ICS (CM9) but now i was pushed back to the step 1, where I don't have a working camera, but I have root access and non official ICS from Cyanogen. I am afraid re-doing all my work and get stuck again in the scrambled screen after it updates the kernel..
I'm I missing something, guys?
Hi there!
Are you still having problems?does this guide here work for you?:
http://forum.xda-developers.com/showthread.php?t=1555984
I've found something,the kernel flash package changes our devices' WiFi driver,that's why it doesn't work.
sorry for not giving a fix until tomorrow,it's sleep time here,I know my excuse will be accepted because you all care for basic human needs...
But please inform me if that guide(Pershoot's) has fixed your problem,thanks for that
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
reXbeer said:
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
Click to expand...
Click to collapse
Hey guys i solve my problem today i desided to solve it anyway and now i am free from this **** ....
i just go to http://droidbasement.com/galaxy/roms/cm10/p4/ and download
bootloader.tar.md5
latest recovery.tar.md5
cm-10-20121112-EXPERIMENTAL-p4.zip
but before start anything first i format my tab memory then restart in download mode install bootloader.tar.md5 and recovery.tar.md5 ... volla ... reboot in recovery mode volla thats it all is now working perfect .... then i install cm-10-20121112-EXPERIMENTAL-p4.zip now my tab is free on madness ...
must try but first fully clean your tab ...
iff its really work then click on thanks button ...
Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
EDIT: Okay, so I've gotten past the start-up screen by skipping everything (setting up time, Google account, etc.) and now I got to the lock screen. Now, if I don't touch the phone at all, it stays on. But once I try to unlock the phone, it is 100% SURE to reboot 30 seconds right after I unlock it. Is there no workaround for this??
marayag001 said:
I just installed this AOKP+Aroma Installer ROM from this page: http://forum.xda-developers.com/showthread.php?t=1580449
And I have NEVER been able to get past the Start-Up screen. It reboots every 30 seconds from the moment I press "Start". Is anybody else having this problem with this ROM as well?
I'm using a Korean Atrix btw, MB861. I would REALLY appreciate the help!
Click to expand...
Click to collapse
what is your previous rom?
Stock Korean ROM
leonardoaraujo said:
what is your previous rom?
Click to expand...
Click to collapse
I was on the stock ROM, GB 2.3.5, MB861...
I also used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. =.=
Atrix is its unlocked?
recovery is new? which?
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
marayag001 said:
I used CWM Recovery to flash this, not ROM Racer's recovery, because for some reason ROM Racer's recovery didn't want to work on my Atrix. And yes, phone's bootloader was unlocked an hour before I flashed the ROM..
Click to expand...
Click to collapse
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
leonardoaraujo said:
I hope you do not mind so many questions ... lol
you have to do a "format / system" is needed .... (in recovery).
then you'll probably lose touch in recovery, proceed with the installation aroma ...
up / down = volume
enter = power button
= capacitive return any key.
Click to expand...
Click to collapse
I already did that, twice. And still the same problem.
ok .... then try fastboot wipe (it worked for some users).
I get this also with all ics roms but im having bp problems that are probably causing that.. nottach 1.3.1 and darkside stripped down are only reliable,stable roms I can run personally... and even those its only in boot android bp pass mode. Cold boot linux.
Sent from my MB860 using XDA
In AROMA set Full Wipe, and try to install only one Launcher, and take a look Kernels screen, check your Kernel and select the correct, i think you are trying some FauxKernel try original 1100 or your kernel...
I've tried installing all three of Joker's kernels (1.0, 1.3, 1.45) and still my Atrix goes haywire. I've tried all kinds of installs (Default, Custom, Full Wipe, Non Wipe, etc.) but none have worked. I wanted this ICS ROM so bad! Is there anything I have to do before I flash this ROM again? I've flashed it maybe 10 times or so now.
Which is your Kernel? Try the oders, the firsts 4 Kernels, like 1100 and others, stock kernels.
I don't know if I want to try installing another kernel, because I don't want to brick my Atrix. I've tried looking for kernels that were made for AOKP, but to no avail. Maybe you could give me a link to a good kernel that will work for AOKP? It's been half a day, and I still haven't been able to use my device...
EDIT: I also noticed that I don't have any service, and the backlights for the softkeys aren't lighting up. So I now have three things to deal with: constant reboot, no service, and softkeys backlights.
you can install rom joker?
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
marayag001 said:
I haven't tried installing other ROMs... Do you mean this one? http://forum.xda-developers.com/showthread.php?t=1445052 I'll be downloading and installing it ASAP. I hope the problem goes away.
Click to expand...
Click to collapse
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
leonardoaraujo said:
which hopefully for you, if the Joker rom work for you, check MD5 sum of my link and compare with your downloaded file, can be a bad download ...
Click to expand...
Click to collapse
I wasn't able to download Joker's ROM, however, I have tried other ROMs, namely Neutrino and the Official CM7 for Atrix. I noticed one thing that both ROMs worked properly, but they didn't have Google Apps pre-installed, so I had to get and install Gapps separately. Then, when I installed the Gapps, that's when the rebooting problem started again. I think my problem has something to do with Google Apps...
I have similar problem when I did install the AOKP from for the first time. It become unstable. I did fastboot to flash the wrapped the phone and install again with (current version is 37a) and it's become quite stable now.
Sent from my MB860 using xda premium
Problem is fixed!... For now.
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
marayag001 said:
I was doing a LOT of research today, and I found some info about rebooting Atrixes which involved radios. I studied this, and I found out that by flashing the correct radio file, I could potentially solve this issue. I just flashed this radio: http://forum.xda-developers.com/showthread.php?t=1260963 and the issue seems to be fixed. I am currently on this ROM: http://forum.xda-developers.com/showthread.php?t=1257574 and so far, the phone has been smooth as butter! I have yet to try with AOKP. I am going to report as soon as possible regarding this ROM. But so far, everything is A-OK! Thanks for all the help, everybody! You have all been very helpful!
Click to expand...
Click to collapse
Hello maraya... im using the same atrix mb861 korean 2.3.5 ... but i didnt find a thread or topic showing how to unlock bootloader or root for 2.3.5 ... plz help
thanks
Found the anwser....
INFO:
Model:Galaxy siii gt-i9300
ROM: Android Revolution HD 17.1
Kernel:Perseus 28.2
I installed ARHD 17.1 and I noticed that my phone wasnt so smooth as it was with v15.2.So I booted into cwm 6.0.1.2 and flashed v15.2.Then I flashed ROM CLEANER.Everything was fine till I tried to reboot my phone.It stuck at samsung logo.I know that this is a constant problem here but I ve done a lot of research and didnt find exact instructions of what to do.I tried to flash CWM recovery once again with Odin.Unfortunatelly it stuck again but this time at Samsung GT-I9300 screen.Please help me if you can.Any help would be apprecieated.
P.T.J0hnnie said:
INFO:
Model:Galaxy siii gt-i9300
ROM: Android Revolution HD 17.1
Kernel:Perseus 28.2
I installed ARHD 17.1 and I noticed that my phone wasnt so smooth as it was with v15.2.So I booted into cwm 6.0.1.2 and flashed v15.2.Then I flashed ROM CLEANER.Everything was fine till I tried to reboot my phone.It stuck at samsung logo.I know that this is a constant problem here but I ve done a lot of research and didnt find exact instructions of what to do.I tried to flash CWM recovery once again with Odin.Unfortunatelly it stuck again but this time at Samsung GT-I9300 screen.Please help me if you can.Any help would be apprecieated.
Click to expand...
Click to collapse
just a little suggestion here:
can u still enter recovery mode? if yes, try to clean everything first(dalvic cache..) see if the problem is solved or not...
if not..u will need to reflash new rom and start all over again
jeffreydesiree said:
just a little suggestion here:
can u still enter recovery mode? if yes, try to clean everything first(dalvic cache..) see if the problem is solved or not...
if not..u will need to reflash new rom and start all over again
Click to expand...
Click to collapse
The thing with recovery mod is weird.Sometimes I can,sometimes I cannot.But when I can,it can only be a previous version of 6.0.1.2 flashed with odin and not 6.0.1.2.Right now I m trying and I cant get into recovery.I searched the official jellybean 4.1.1 for my country (greece) but cant find it and dont know what to do.:/
hi!
perhaps you had a bad download of V17.1? you may try checking the md5 sum....
i suggest you do a clean install, flash the superwipe for arhd which is found in the OP, and then flash arhd again
regards,
saywhatt said:
hi!
perhaps you had a bad download of V17.1? you may try checking the md5 sum....
i suggest you do a clean install, flash the superwipe for arhd which is found in the OP, and then flash arhd again
regards,
Click to expand...
Click to collapse
TY for the reply.I'll try it and i ll let you know
Oh God thank you very much i think it worked.But I have another problem now.My pc doesnt recognise it.It says USB MTP failed.I know that MTP stands for Mobile Transfer Protocol but I encounter this error for the 1st time and I dont know what to do.Nevermind I ll search it myself dont bother I only have one last question.If I try once again to go back to v15.2 will I have the same problem?
P.T.J0hnnie said:
The thing with recovery mod is weird.Sometimes I can,sometimes I cannot.But when I can,it can only be a previous version of 6.0.1.2 flashed with odin and not 6.0.1.2.Right now I m trying and I cant get into recovery.I searched the official jellybean 4.1.1 for my country (greece) but cant find it and dont know what to do.:/
Click to expand...
Click to collapse
u can search it here Click
P.T.J0hnnie said:
Oh God thank you very much i think it worked.But I have another problem now.My pc doesnt recognise it.It says USB MTP failed.I know that MTP stands for Mobile Transfer Protocol but I encounter this error for the 1st time and I dont know what to do.Nevermind I ll search it myself dont bother I only have one last question.If I try once again to go back to v15.2 will I have the same problem?
Click to expand...
Click to collapse
try to redownload the file again n make sure before u flash it into ur phone check first the MD5....
jeffreydesiree said:
u can search it here Click
try to redownload the file again n make sure before u flash it into ur phone check first the MD5....
Click to expand...
Click to collapse
I didnt download the file again because I checked it immediately after I downloaded it.When I managed to boot into recovery mod(the older version)I flashed the rom again and my phone booted normally.I think that the problem-my fault-was that I flashed 15.2 over 17.1.I dont know if the problem caused by the older rom or the older kernel or the tweaks but it belongs to past right now.After that,I updated to the latest version of cwm via ROM Manager from PlayStore.
P.T.J0hnnie said:
I didnt download the file again because I checked it immediately after I downloaded it.When I managed to boot into recovery mod(the older version)I flashed the rom again and my phone booted normally.I think that the problem-my fault-was that I flashed 15.2 over 17.1.I dont know if the problem caused by the older rom or the older kernel or the tweaks but it belongs to past right now.After that,I updated to the latest version of cwm via ROM Manager from PlayStore.
Click to expand...
Click to collapse
glad to hear that...
here a little tips..
always clean everything before u flash ur phone..it might help..:good::laugh:
jeffreydesiree said:
glad to hear that...
here a little tips..
always clean everything before u flash ur phone..it might help..:good::laugh:
Click to expand...
Click to collapse
I know bro I do it always no matter what.I never forget this
Help! The phone dropped to the ground once and had a crack on the digitizer and LCD screen. I replaced both of them and now, it is stuck in a boot loop (turns on, stays on splash screen) I've tried flashing the latest firmware thru Odin, but the same thing happens. All I can do on the phone is just getting to the download mode. I can't get to recovery, too.
Did you wiped cache and dalvick before reboot?
Before the first bootloop what did you do(Install an apk? Flash a zip?)? Were you rooted? A custom rom? A stock one?
During Odin did you wait for pass and blue color?
have you seen This? Is that similar for you?
Mukiai said:
Did you wiped cache and dalvick before reboot?
Before the first bootloop what did you do(Install an apk? Flash a zip?)? Were you rooted? A custom rom? A stock one?
During Odin did you wait for pass and blue color?
have you seen This? Is that similar for you?
Click to expand...
Click to collapse
Yes, I did wipe both, I didn't do anything weird except a reboot, not rooted, stock ROM, pass on Odin, not similar to the hard brick problem. I can get to download and recovery mode.
You can go now to recovery mode? Have you retry to flash a rom?
Do you remember last version before and the last you install? Couldn't it be you had try to flash an older version?
Mukiai said:
You can go now to recovery mode? Have you retry to flash a rom?
Do you remember last version before and the last you install? Couldn't it be you had try to flash an older version?
Click to expand...
Click to collapse
I'm going to flash a new one.
Acerpeng229 said:
I'm going to flash a new one.
Click to expand...
Click to collapse
Any news? Do you enjoy again your Mega? Hope that yes.
No news ?
got same problem
Mukiai said:
No news ?
Click to expand...
Click to collapse
hello fellas..this my first post here..im using samsung mega lte,and have a problem after root my phones..cant go recovery mode.couse there have a red text warranty bit kernel and 3more text avove in my screen..just stuck at samsung logo..dont know how to do..there any friend here know how to do?its been a month my phone stuckat the same problem
It seems this issue is a difference in screen compatibility. To fix this, you can turn the device on and let it boot into the Android OS, then (while still on), unplug the old LCD and plug in the new LCD. Hit the power button to ensure the new LCD is working properly, then turn the device on, and finish assembling your phone.
same issue
R960 stuck in loop after replacing screen and cant access recovery or odin mode
need help desperately
I just got a galaxy mega from someone an got ripped off because it's running 4.4 kit Kat and had the screen replaced right before I got it, so it doesn't work. Bootloops. Due to not an OEM screen and I don't really have the cash to risk ordering a screen claiming to be oem.
So how can I just downgrade to a version before the need for OEM screen??
Please any help would be greatly appreciated!!
-d.block- said:
I just got a galaxy mega from someone an got ripped off because it's running 4.4 kit Kat and had the screen replaced right before I got it, so it doesn't work. Bootloops. Due to not an OEM screen and I don't really have the cash to risk ordering a screen claiming to be oem.
So how can I just downgrade to a version before the need for OEM screen??
Please any help would be greatly appreciated!!
Click to expand...
Click to collapse
You can not in normal way (i.e flashing stock 4.2). But there is hope for you... look there:
http://forum.xda-developers.com/showthread.php?t=2608110
trurl3 said:
You can not in normal way (i.e flashing stock 4.2). But there is hope for you... look there:
http://forum.xda-developers.com/showthread.php?t=2608110
Click to expand...
Click to collapse
I'm still a bit confused as to what exactly I should do.. there's alot in that thread.. I really can't afford to buy another screen. This really sucks that the update requires OEM screen in order to function.. if I could find a way to fix the issue without buying a screen I'd be extremely grateful!
But I don't have much experience at all with rooting and flashing custom ROMs, and I'm kind of afraid to brick the phone..
Any help to get the touch screen up and running would be highly appreciated!!
Thank you!
I am the only one who only a part of upper screen works? (I can see status bar, and rotating enter to wifi settings and try to get out of welcome screen of att)
Mukiai said:
No news ?
Click to expand...
Click to collapse
OMG! Sorry for the very late reply. It works fine already. Went to download mode and flashed using Odin. Thanks!
Hi guys. I've had a rooted S3 for a while and have flashed loads of roms. Few months ago the phone started acting strangely and the only Ron I could get to work was the German version of the original KK. Now, even though the device is still rooted any attempt to flash another room will give a "signature not verified" error. Anyone else come across this?? Cheers
Hamsterboy2000 said:
Hi guys. I've had a rooted S3 for a while and have flashed loads of roms. Few months ago the phone started acting strangely and the only Ron I could get to work was the German version of the original KK. Now, even though the device is still rooted any attempt to flash another room will give a "signature not verified" error. Anyone else come across this?? Cheers
Click to expand...
Click to collapse
Do you use odin to flash roms or custom recovery??
Custom Recovery... TWRP. Think using Odin might yield some results?
Thanks for the reply btw ?
Hamsterboy2000 said:
Custom Recovery... TWRP. Think using Odin might yield some results?
Thanks for the reply btw
Click to expand...
Click to collapse
You can turn off signature verification in twrp it should do the trick bro hit the tnx button if I helped you
Oh cool. Didn't spot that. Using ROM Manager so will have a look at the options. Cheers
Hamsterboy2000 said:
Custom Recovery... TWRP. Think using Odin might yield some results?
Thanks for the reply btw ?
Click to expand...
Click to collapse
Be sure you haven't a borked version of TWRP. I think official 2.8.7.0 is borked.
Try a more recent unofficial one or use Philz touch 6.48.4 instead for instance.
If your recovery is OK, just check options inside twrp recovery about signature verification... Un-tick zip signature verification.
Btw, about root, AFAIK you can flash custom recovery and custom ROMs without being rooted.
You were right. Switched to CWR and it's all good. Cheers.....