I was having NO luck with any of the ODIN files to restore the factory baseband from the leaked ICS modem. I FINALLY found a flashable zip to restore the factory baseband. Here's the link: http://downloadandroidrom.com/file/GalaxyNote/modems
Here's the link to the thread so you can give proper thanks if this worked for you: http://forum.xda-developers.com/showthread.php?t=1533378&page=2
Hope this helps until we can get a flashable upgrade.
Related
Hi guys! I installed one theme last night and now i have big problems with my phone. if i wipe all device and install the GalaxyMOD again has no result, the ''Theme Galaxy S3'' is still in my phone.
I want to know how can i restore my phone to stock rom without using odin ? I have problems with usb, doesn't connect to the pc and i can't use odin.
Thanks!
Two ways. Either with Mobile Odin (get it from Google Play) or somewhere in General there's a thread with CWM flashable stock roms (don't have a link so you'll have to search for it).
i'm looking for the thread with CWM flashable stock roms, but i can't find it :highfive:
Can you give me i link ?
I'm searching for it... right now... but...
From my previous post "...don't have a link so you'll have to search for it".
smartceleron said:
i'm looking for the thread with CWM flashable stock roms, but i can't find it :highfive:
Can you give me i link ?
I'm searching for it... right now... but...
Click to expand...
Click to collapse
You could use a nandroid backup file if someone has.
Here is stock ICS rom which is CWM flashable (released by wanam, not the wanamlite version but stock (odex/deodex) rom
http://wanamlite.com/2012/08/01/romcwmxwlptics4-0-4-odexed-fully-deodexed-stock-rom/
1) restore from a back up (if you made one in the beginning)
or
2) flash stock firmware via recovery mode
i didn't do a backup...
Only CWM Stock.
GT-I9100_WanamLite.Deodexed.XWLPT.NO-WIPE.zip
http://rapidshare.com/files/753025842/GT...O-WIPE.zip
http://www.filefactory.com/file/67a7h1gq...O-WIPE.zip
http://filepost.com/files/f5c5d5ac/GT-I9...-WIPE.zip/
GT-I9100_WanamLite_Odexed_XWLPT_NO-WIPE_zip
http://rapidshare.com/files/4006569730/G...O-WIPE.zip
http://www.filefactory.com/file/5r2zv7om...O-WIPE_zip
http://filepost.com/files/47c4f8d7/GT-I9...-WIPE.zip/
which is best or good for me ? decodexed or odexed ?
Bootloader unlocked, rooted, running baseband vrall4, can someone explain to me how to update or do I need to flash back to stock?
Just download the new radio and flash it in recovery.
http://forum.xda-developers.com/showthread.php?t=2108510
If you're talking about updating the OS, I believe there is a rooted stock ROM in the development section, if not you can use another ROM that has been updated with the latest OTA.
pabowhunter59 said:
Bootloader unlocked, rooted, running baseband vrall4, can someone explain to me how to update or do I need to flash back to stock?
Click to expand...
Click to collapse
Once you download the VRAMC3 baseband, put it on your external SD card then boot into TWRP recovery, click install and then find the zip file for the bew baseband. Flash away.
Its always a good idea to check the md5sum of the download for the file or it could end up bad.
Thanks for your reply!
Still learning here, and don't want to make a mistake. I'm running Beanstown 106 v17 which is supposed to have all the features of the new update. From what I've read on this thread as long as I download my current modem along with new I'm at very little risk and revert back to my current modem? Thanks Again for the help. JW
Baseband download
I feel comfortable using twrp to install the baseband, can you provide a link to the new baseband download?
Updated Baseband Done!
Went off without a hitch, Thanks again for all the help!
Please read forum rules before posting
Questions and help issues go in Q&A and help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hi all,
I was wondering if anyone knew what the most current baseband is for the T-Mobile HTC One?
And if there is a flashable zip of it somewhere on the interwebs?
Thanks :good:
SpaceSpeed said:
Hi all,
I was wondering if anyone knew what the most current baseband is for the T-Mobile HTC One?
And if there is a flashable zip of it somewhere on the interwebs?
Thanks :good:
Click to expand...
Click to collapse
Just in case you haven't found it the current baseband is 4T.27.3218.14_10.33C.1718.01L. You can make your own flashable zip by removing the radio.img file out of the latest OTA file. Then download a flashable zip from
[Radio Dumps] Collection of different Radio Images and replace the radio.img file with the one from the OTA. This thread [HOW-TO]Flash latest Radio in Recovery will walk you through the steps to flash and make a backup of the original one prior to flashing.
Much appreciated, thanks. :good:
Should have thought about just extracting the radio image, makes sense.
Is someone has a odin package to flash?
I am using NA3 now. Kies shows no update and when i click firmware upgrade is says device's version cannot be updated.
@starmaster10 Do you have stock unmodificated NA3 firmware?
dsanke said:
@starmaster10 Do you have stock unmodificated NA3 firmware?
Click to expand...
Click to collapse
This rom ROOT_JDQ39.I527MVLUBNA3.tar by @krazykipa is the only really good working NA3 stock rom which is rooted already and is a roger's rom, but the rogers stuff can be removed if that is not your carrier as it is just a couple of items only i believe to remove, this rom should work for you, but if the phone has been update to the new kk NE5 rom then this rom most likely will not work for you...just unpack it first after download is complete and then use odin to flash it.
I can confirm that albe95 S6 4.5 is workin like a charm on s4 i545.....
Can you link the rom you're using please?
If you can't post links pm it to me and I will post it for you
Thanks
You can find it in s4 i9505 android developpement.and be careful because you must have a rooted safestraped and lollipop on your s4
Did you have to modify the apn settings for it to work with Verizon?
No just flash oc1 stock kernel after you flashed the rom
anyone try it with flashfire?
would odining back to nc5, rooting, installing safestrap, and then flashing this rom and the requisite zips be a good install plan when coming from a OF1 rom (NK4 bootloader).
Brian
I ve flashed this rom on a oc1 rooted with nc5 bootloader.offcorse with safestrap
reliant_turbo said:
would odining back to nc5, rooting, installing safestrap, and then flashing this rom and the requisite zips be a good install plan when coming from a OF1 rom (NK4 bootloader).
Brian
Click to expand...
Click to collapse
That will work but you will need to flash the OC1 firmware also.
You can get the firmware only zip from here
So you would only flash firmware, rom, then OC1 kernel.zip.
Does everything seem to be pretty stable @metallover33 ?
I'm hoping to have time to try it sometime soon, just not sure when.
Thanks.
yeah I figured id have to flash that... thats partially what i meant by "requisite zips" as detailed out in this thread: http://forum.xda-developers.com/showpost.php?p=63027724&postcount=6375 though this guy did the gigilie safestrap method. im not sure if the wifi fix zip takes care of some of the firmware stuff.
now I'm curious if i could just wipe, then flash the firmware, the rom and then the kernel in flashfire.
id like to not have to do a full kitkat wipe.
any reason you say flash the firmware first before flashing the rom?
thanks
Brian
No reason.
The only thing with flashfire though is you need to open the rom.zip and remove the boot.img so you don't flash a kernel that isn't for our phone.
It's always good to know what's in the rom.zip before flashing anyways
hmmm. is that's all that's contained in the boot.img? I know enough to stay out of trouble..... most of the time.
Brian
The boot.img is the kernel... I haven't looked in it myself but I think that's all there is that needs removed.
I have a friend that can check for me though.
yeah if they could take a peek that would be much appreciated. id like to give this a go in flashfire.
thanks
Brian
Open the zip with 7zip and delete boot.img.
Then go into the meta folder all the way in is the updater-script.
You need to replace it the one in the link.
https://www.dropbox.com/s/h3ymkighoznqq49/updater-script?dl=0
Then it should work with flashfire.
Not 100% sure but should.
Let us know how it goes.
Make sure to flash all 3 zips.
Also make sure you know how to recover using Odin.
ok. deleted boot.img and deleted updater-script and copied in the replacement.
yeah i have my nc5 full wipe recovery tar and pit file
I hope someone can make a custom oc1 based kernel .it would be great
Can only be done for mdk users.
Ss and ff users cannot have custom kernels even if it's based on stock.
ok here goes........ flashing now.
---------- Post added at 11:04 PM ---------- Previous post was at 10:42 PM ----------
it booted. wifi doesnt work. ill have to install flashfire from the sd and flash the wifi fix.
i also dont see a 4g icon but i have bars...... but im not online.
I'm working on making a modified version with our apn config and wifi modules.
Flash oc1 wifi modules. I have them in my afh account just search my username.