Guys I've flashed the Advanced Stock Kernel for ICS, with stock ICS ROM.. I did it using the .elf file inside windows... well kernel installed fine but when I Rebooted the phone, after booting it says "No Sim card installed, emergency calls Only"
Elixx13 said:
Guys I've flashed the Advanced Stock Kernel for ICS, with stock ICS ROM.. I did it using the .elf file inside windows... well kernel installed fine but when I Rebooted the phone, after booting it says "No Sim card installed, emergency calls Only"
Click to expand...
Click to collapse
insert your sim again then try.
Related
So I had the 1.36 ROM. I installed Android Revolution ROM and I backed it up with CWM. I locked my bootloader and installed the new 1.43 ROM. I rooted it and installed the Android Revolution ROM. I restored my backup on and now when I try to turn on my WiFi, it says error. It says error with the WiFi hotspot as well. Any ideas to get it to work?
hasoon2000 said:
So I had the 1.36 ROM. I installed Android Revolution ROM and I backed it up with CWM. I locked my bootloader and installed the new 1.43 ROM. I rooted it and installed the Android Revolution ROM. I restored my backup on and now when I try to turn on my WiFi, it says error. It says error with the WiFi hotspot as well. Any ideas to get it to work?
Click to expand...
Click to collapse
Flash the kernel for your rom from fastboot.
You might have to flash it twice, rebooting in between.
Binary100100 said:
Flash the kernel for your rom from fastboot.
Click to expand...
Click to collapse
I never changed the kernel though.
Just flashed this kernel.
http://forum.xda-developers.com/showthread.php?t=1359951
Still didn't work.
Edit: I reflashed the kernel and it worked. It said in the thread "NOTE: Because the previous kernel included a Secured RAM Disk, so you may need to run the script twice. (Once this is done, then any subsequent flash should complete on the first time)"
So you must flash the kernel TWICE so it works. Thanks for the help!
in same situation..need some help please!!
hi all. i'm new to flashing kernels to phones manually. i have usually always used roms which have the stable kernels built in.
I just installed the beastmod 2.2 version and it has a separate kernal. i'm facing the same issue as my wifi says error when i try to enable it. PLEASE HELP!!
I enabled android debugging and connected my phone (not fastboot mode, just regular). i navigated into my android sdk folder and platform tools. just to confirm that my device is being recognized i tried adb devices and my s/n comes up. then i tried doing fastboot flashall and it gives me "C:\Program Files (x86)\Android\android-sdk\platform-tools" i don't know what to do now
please can you provide with step to step steps how to flash a kernal (boot.img). i have also tried downloading kernal manager but it doesn't show any kernals in there for me to download.
any help will be greatly appreciated.
thanks in advance,
Eneet
UPDATE: UPDATE: so i tried running the command (fastboot boot boot.img) while in fastboot mode on the phone and it restarted my phone. then i tried turning my wifi on and still it shows as error. then i pulled out the battery and tried flashing the boot.img again in fastboot mode and phone restarted. still wifi isn't working. any suggestions??
hasoon2000 said:
Just flashed this kernel.
http://forum.xda-developers.com/showthread.php?t=1359951
Still didn't work.
Edit: I reflashed the kernel and it worked. It said in the thread "NOTE: Because the previous kernel included a Secured RAM Disk, so you may need to run the script twice. (Once this is done, then any subsequent flash should complete on the first time)"
So you must flash the kernel TWICE so it works. Thanks for the help!
Click to expand...
Click to collapse
I tried to flash this kernel, but it says update aborted. I don't have Arabic or wifi!
Faruha said:
I tried to flash this kernel, but it says update aborted. I don't have Arabic or wifi!
Click to expand...
Click to collapse
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Nshih422 said:
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Click to expand...
Click to collapse
OMG! It totally worked!!!!!!!! I could kiss you right now!!!!!!!! Thank you sooooooooooooooooo much! I have wi-fi and I have Arabic!!!!!!!!!!! You guys are AMAZINGGGGGGGG. I love you <3<3<3 !!!! God bless. I am gonna go through all the forums and read and learn as much as I can and totally un-noob myself. Thank youuuuuu!!!!!!
thanks
Nshih422 said:
Your not flashing it in Recovery are you?
Download and extract the ZIP on your computer, connect your phone, and run "Flash.bat"
It is all automated from there and does everything for you.
Click to expand...
Click to collapse
i got this problem for the last weeks...resolved
Hello apparently 4.0.4 auto resets recovery if you try to flash a different one.
I just got my memory card, looking forward to root/mess with my tab, but when I used Odin to flash CWM and Rebooted the device, its still the stock recovery.
I was told I could flash 4.0.3 and go from there but GT-P3113_XAR_1_20120412104938_ldcgx9tzmx.zip Is a zip file and not recognized by odin, What do I do now?
Thanks
Edit*: I unzipped the archive, inside wan an MD5 recognized by odin, currently trying to flash that.
For those in the same situation, it worked, Sucessfully downgraded to 4.0.3
rnaodm said:
Hello apparently 4.0.4 auto resets recovery if you try to flash a different one.
I just got my memory card, looking forward to root/mess with my tab, but when I used Odin to flash CWM and Rebooted the device, its still the stock recovery.
I was told I could flash 4.0.3 and go from there but GT-P3113_XAR_1_20120412104938_ldcgx9tzmx.zip Is a zip file and not recognized by odin, What do I do now?
Thanks
Edit*: I unzipped the archive, inside wan an MD5 recognized by odin, currently trying to flash that.
Click to expand...
Click to collapse
Flashed CM10 Nightly and Gapps Thanks to http://forum.xda-developers.com/showthread.php?t=1791975
Currently waiting on the Cyanogenmod whriling logo to finish. If it does, All is well
Its been about 15 mins, Stuck at the same screen, I dont think its going to boot.
Edit* I forgot to wipe data after the install, I think thats why, Trying again
Hi guys,
I basically wiped my phone and completely forgot to copy the ROM I wanted to flash into my ext SD card. Now, the phone has no ROM to boot into and I need to be able to mount it onto Windows from within the recovery to be able to do it. I'm running CWM 6.0.2.7
Has anyone ever done this? What should I do?
Thanks
Wipe data doesn't mean format (like PC) it's just a factory reset
you can flash any official FW for your device by Odin
So it isn't possible for Windows to detect the phone in any way so I can copy the ROM into it?
It's possible by using ADB and push it
but why you don't boot up your device and copy it?
Use adb to push the file onto the card. Or remove ext. SD card and use a reader to copy it over.
Here is a good adb interface, it has easy push/pull where you just supply the two file paths and hit go,
http://forum.xda-developers.com/showthread.php?t=2097848
[TOOL] ADB Command Center [Alpha]
Thanks for the prompt replies everyone.
I just re-flashed an original FW through Odin, rooted it back, re-installed CWM Recovery and now tried to flash a new rom, in this case, Foxhound and after it tries to reboot it comes back into CWM always... it never boots into the ROM..
Anyone has any clue why this would be happening?
Sptz said:
Thanks for the prompt replies everyone.
I just re-flashed an original FW through Odin, rooted it back, re-installed CWM Recovery and now tried to flash a new rom, in this case, Foxhound and after it tries to reboot it comes back into CWM always... it never boots into the ROM..
Anyone has any clue why this would be happening?
Click to expand...
Click to collapse
Try reinstall it
Sent from my GT-I9300 using xda premium
qtwrk said:
Try reinstall it
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The ROM? Just did and the same thing happens, boots up to Samsun Galaxy logo, then that "eye" logo then reboots again into CWM. At all times.
I just installed Omega just to try it out and it works, boots into the ROM, with Foxhound it doesn't even reach the Foxhound Logo, it reboots and goes back to CWM... Any ideas? I can't post in the Foxhound thread due to lack of posts
Flash stock Rom, and allow it to boot up properly before you do anything else....did you do that?
slaphead20 said:
Flash stock Rom, and allow it to boot up properly before you do anything else....did you do that?
Click to expand...
Click to collapse
Yes, two times already. Then rooted, then flashed CWM Recovery then wiped data etc, flashed foxhound and same thing happens. Tried Omega and it boots into it, it's only Foxhound and I really wanted to try it...
I'm sorry this thread has derailed into another issue but thought it wasn't worth cluttering with yet another thread.
Is it possible to shut down the phone from CWM Recovery aside from doing a battery pull?
Could be a bad download. Try downloading again.
Today morning i was trying to install Chainfire 3d. I clicked the second option it rebooted but now the phone gets struck on the boot logo.
The phone doesnt boot. Waited for and hour tried 20+ times.
I have already installed CWM recovery. But when i click restore it says m5 sum error( Yes CWM is still working).
I even tried factory reset but it didnt work. What do i do?
Explain in detail help me plz.
OK: I got few replies and the most common one was to flash a new ROM.At present i want to stick to the stock 4.2.1.
I'm currently on 4.1.2.
Everybody gives the method to flash via SP Flash tools, which i don't want to as it doesn't detect my device properly and i don't want to waste my time in it.
As i mentioned earlier i have already rooted and have installed CWM recovery. Can i CWM to install the official ROM.When does TP upgrade pop-up. How should i install it using CWM + precautions and detailed explanations.
Should be noob friendly.
Go and check development section, you need to find a ROM which can be flashed VIA recovery.
There are threads which show how to install drivers, and IF you try to flash VIA SP Tools make sure you remove battery, sim card, sd card, initialise the download process and then connect the phone.
eagledipesh said:
Go and check development section, you need to find a ROM which can be flashed VIA recovery.
There are threads which show how to install drivers, and IF you try to flash VIA SP Tools make sure you remove battery, sim card, sd card, initialise the download process and then connect the phone.
Click to expand...
Click to collapse
Flashed a ROM through CWM now working fine.
G.Ashwinkumar said:
Flashed a ROM through CWM now working fine.
Click to expand...
Click to collapse
Please press thanks, its free.
So my phone was getting slow and I decided to flash a rom that I used on to it. It's the same Rom I had on it before.
Then I realized I couldn't make any calls, it kept on saying "Not registed on network"
I tried everything I found.
- Tried flashing two modem files on to it
- Tried upgrading to 4.3
- Unroot and Triangle Away to get factory restore using Kies (it restored to 4.3)
- I tried flashing more modem files
Now it's saying No Service "Selected network not available"
What can I really do to get my phone back?
donperry said:
So my phone was getting slow and I decided to flash a rom that I used on to it. It's the same Rom I had on it before.
Then I realized I couldn't make any calls, it kept on saying "Not registed on network"
I tried everything I found.
- Tried flashing two modem files on to it
- Tried upgrading to 4.3
- Unroot and Triangle Away to get factory restore using Kies (it restored to 4.3)
- I tried flashing more modem files
Now it's saying No Service "Selected network not available"
What can I really do to get my phone back?
Click to expand...
Click to collapse
sounds like you formatted your efs partition. did you make a backup?
H0pesfall said:
sounds like you formatted your efs partition. did you make a backup?
Click to expand...
Click to collapse
No I did not make backup...
Can't remember selecting that option either but if that's what it is ...
donperry said:
So my phone was getting slow and I decided to flash a rom that I used on to it. It's the same Rom I had on it before.
Then I realized I couldn't make any calls, it kept on saying "Not registed on network"
I tried everything I found.
- Tried flashing two modem files on to it
- Tried upgrading to 4.3
- Unroot and Triangle Away to get factory restore using Kies (it restored to 4.3)
- I tried flashing more modem files
Now it's saying No Service "Selected network not available"
What can I really do to get my phone back?
Click to expand...
Click to collapse
Sounds like you lost your IMEI number, check in system settings if it says 0000.
EFS partition could be corrupt or unreadable.
Look here: http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289
user2k10 said:
Sounds like you lost your IMEI number, check in system settings if it says 0000.
EFS partition could be corrupt or unreadable.
Look here: http://forum.xda-developers.com/galaxy-s3/general/ref-imei-efs-stuff-i9300-including-t2393289
Click to expand...
Click to collapse
IMEI number in status is the same as written behind the battery. So that's still in tact
anyone else?
Sent from my HTC One X using XDA Free mobile app
I got the same problem once when i shifted to a new rom. Just search the forums and find a modem that suits your country. I used XXEMG4 modem.
When you find the file, it would be dot rar. Put it in your external Sd card, reboot in recovery and just flash that file.
Since you're on 4.3 then your EFS partition format differs than 4.1.2's EFS partition format, so don't bother flashing a Modem for EFS 1, as 4.3 uses EFS 2 Modems XXEMG4+.
Try to get the latest modem file for your device (Either MK6 or NA8) then get the modem.bin out of the Archive, then flash it to the phone using Odin's CP / Phone button not PDA.
Sent from my GT-I9300 using Tapatalk
Saad_ said:
Since you're on 4.3 then your EFS partition format differs than 4.1.2's EFS partition format, so don't bother flashing a Modem for EFS 1, as 4.3 uses EFS 2 Modems XXEMG4+.
Try to get the latest modem file for your device (Either MK6 or NA8) then get the modem.bin out of the Archive, then flash it to the phone using Odin's CP / Phone button not PDA.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
That sounds like a plan
I found the CWM for NA8... But i can't seem to get proper CWM on my phone. When my phone boots in recovery mode i'm not seeing some of the usual menu items.
donperry said:
That sounds like a plan
I found the CWM for NA8... But i can't seem to get proper CWM on my phone. When my phone boots in recovery mode i'm not seeing some of the usual menu items.
Click to expand...
Click to collapse
donperry said:
That sounds like a plan
I found the CWM for NA8... But i can't seem to get proper CWM on my phone. When my phone boots in recovery mode i'm not seeing some of the usual menu items.
Click to expand...
Click to collapse
You can try other Recoveries like PhilZ and TWRP.
Saad_ said:
You can try other Recoveries like PhilZ and TWRP.
Click to expand...
Click to collapse
PHONE FIXED!!!
1. I used RASHr from the play store to download CWM touch
2. copied these two files (below) and flashed them using CWM recovery
Rebooted and my phone is back!
Initially, it says no network and you see a signal not available symbol, but after 10 seconds it was alright
In this RAR are the two zip files I flashed:
https://www.mediafire.com/?m64vwcii7d914dv
donperry said:
PHONE FIXED!!!
1. I used RASHr from the play store to download CWM touch
2. copied these two files (below) and flashed them using CWM recovery
Rebooted and my phone is back!
Initially, it says no network and you see a signal not available symbol, but after 10 seconds it was alright
In this RAR are the two zip files I flashed:
https://www.mediafire.com/?m64vwcii7d914dv
Click to expand...
Click to collapse
Does non-touch vs touch CWM make a difference for mobile data??
n0stalgia said:
Does non-touch vs touch CWM make a difference for mobile data??
Click to expand...
Click to collapse
I dont know, don't think so.
I just couldn't do it with whatever version i had on
donperry said:
PHONE FIXED!!!
1. I used RASHr from the play store to download CWM touch
2. copied these two files (below) and flashed them using CWM recovery
Rebooted and my phone is back!
Initially, it says no network and you see a signal not available symbol, but after 10 seconds it was alright
In this RAR are the two zip files I flashed:
https://www.mediafire.com/?m64vwcii7d914dv
Click to expand...
Click to collapse
Flashing this kernel makes my phone stuck in boot loop, and flashing just the modem doesn't solve the network state disconnected