I've a Lumia 800 I've followed the guide for Full unlock with NSS but I don't have any "Nokia Connectivity" in NSS!!! PLEASEE HELP!
UP UP UP
Stay Calm
first try searching in the thread for a similar problem followed by a solution, in the worst scenario, then try asking in a thread with a specific Title.
rafa8595 said:
first try searching in the thread for a similar problem followed by a solution, in the worst scenario, then try asking in a thread with a specific Title.
Click to expand...
Click to collapse
is 3 days serach! Cant install qualcomm driver
are you sure that you can install the qualcomm? in my lumia 800 i cant use the qualcomm because my hardware revision ends with a "2.4"
make sure that your lumia is not 2.4.
On a pc driver or a mac
Sent from my Lumia 800 using XDA Windows Phone 7 App
asmanthebell said:
On a pc driver or a mac
Sent from my Lumia 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Revision 2.3
This is what i get when try to flas .nb files!
sub078 said:
I've a Lumia 800 I've followed the guide for Full unlock with NSS but I don't have any "Nokia Connectivity" in NSS!!! PLEASEE HELP!
Click to expand...
Click to collapse
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
ChrisKringel said:
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
Click to expand...
Click to collapse
Nothing to do! Qualcom dont installed! NO DRIVER NO FLASH! I sell this phone on monday and roll back to Android!
Check under C:\programfiles\nokia\ncs\drivers install all of the files in there then goto your drivers page on windows an right click and hit install drivers. If it says cannot be found. PM your Skype and I will try and help you further.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Someone can explaine the EXACT procedure to access to download mode on lumia 800? nothing seem to work! VOL UP and power, VOL DOWN and power.... nothing! Please explaine me the EXACT procedure!
try to flash using linux.
i also flashed my first customrom using dd in ubuntu.
have a look at my thread that i created when i tried to flash, it might help u too: http://forum.xda-developers.com/showthread.php?t=1698272
cheers
sub078 said:
Someone can explaine the EXACT procedure to access to download mode on lumia 800? nothing seem to work! VOL UP and power, VOL DOWN and power.... nothing! Please explaine me the EXACT procedure!
Click to expand...
Click to collapse
Vol UP and power, if it does a short vibration and shows a Qualcomm Storage device on Windows, and Windows asks you to format the device (which you click cancel)/this device shows on diskmgmt.msc or diskpart, THEN you have a flasheable device.
If you do Vol UP and power, and it does a long vibration and boots Windows Phone, you have the weird bootloader.
If you do Vol UP and power, and it does a short vibration and Windows recognizes the device as Nokia DLOAD, you have the new bootloader.
You actually don't need any driver if your Lumia is able to be flashed. Qualcomm drivers are needed only for development purposes.
rescbr said:
Vol UP and power, if it does a short vibration and shows a Qualcomm Storage device on Windows, and Windows asks you to format the device (which you click cancel)/this device shows on diskmgmt.msc or diskpart, THEN you have a flasheable device.
If you do Vol UP and power, and it does a long vibration and boots Windows Phone, you have the weird bootloader.
If you do Vol UP and power, and it does a short vibration and Windows recognizes the device as Nokia DLOAD, you have the new bootloader.
You actually don't need any driver if your Lumia is able to be flashed. Qualcomm drivers are needed only for development purposes.
Click to expand...
Click to collapse
O MOTHER OF GOD! Thank u! REALLY THANK U
I have the weird bootloader.... what can I do?
sub078 said:
is 3 days serach! Cant install qualcomm driver
Click to expand...
Click to collapse
ChrisKringel said:
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
Click to expand...
Click to collapse
There is no such thing as a qualcomm driver. It is the end of the line....read Help i brick my lumia
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
sub078 said:
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
Click to expand...
Click to collapse
Unfortunately nothing.
sub078 said:
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
Click to expand...
Click to collapse
My advice is to bring it to NOKIA CARE repair center and i hope you still have warranty with your lumia. If none, you can still have them reflash it. Thats the only option left to do.:angel: trust me i've been dealing with this issue for almost a month now. Ive gone to every 3rd party cellphone repair service but no luck.
Related
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
Hello Lumia Users,
with the discovery of the Qualcomm mode we are finally able to unlock our devices as well. However the process of flashing involves always a certain risk: the risk of making the device unusable, the so called bricks. I created this thread to prevent huge amounts of posts discussing methods to revive bricked devices.
You use all the methods and techniques described in this thread at your own risk. We are not responsible for any damage or loss of waranty.
Before you post in this thread please gather some information first.
1. How dead is your phone:
Does it vibrate when you hold the on/off button?
If not: leave your phone on the originale charger (with the supplied cable) for 8 to 10 hours and try again.
Does it vibrate when you hold the volume-down+power+camer button?
Are you able to enter the Qualcomm mode?
2. Details about the flashing process
What operating system did you use to flash your phone?
If you are running Linux and you are able to enter Qualcomm mode connect your Lumia in Qualcomm mode. Create a list of the lumias partitions (fdisk -l) and include it in your post.
Do you remember the command you used to flash the phone?
Sometimes you can Access the previous commands on the command prompt by pressing the up-arrow on your keyboard
Do you remember the output of the dd command?
What ROM did you flash?
Did you perform a hardreset after flashing?
3. Additional info:
Do you have a Nokia Care Point or carrier store nearby?
Did you create dumps/backups of the partitions before flashing the ROM?
Have you ever used NCS or some other tools to flash firmware to the device?
How bricked is my phone?
It vibrates. Connects to MAC osx and Windows. Will not connect in Ubuntu. Able to enter qualcomm disk mode, doesn't show up in ubuntu. Might be able to reflash it in mac osx though, or restore the partition I screwed up from an IMG file of that partition.
I used ubuntu to flash it. I accidentally flashed the 3rd partition of it. The command I used was
dd if=/Home/David/os-new.nb of=/dev/sdB3
The output said something about copying over the .nb file correctly..
I used the full unlock rom by lucifier. Nothing wrong with me. My fault on the incorrect flashing.
wardoc22 said:
How bricked is my phone?
It vibrates. Connects to MAC osx and Windows. Will not connect in Ubuntu. Able to enter qualcomm disk mode, doesn't show up in ubuntu. Might be able to reflash it in mac osx though, or restore the partition I screwed up from an IMG file of that partition.
I used ubuntu to flash it. I accidentally flashed the 3rd partition of it. The command I used was
dd if=/Home/David/os-new.nb of=/dev/sdB3
The output said something about copying over the .nb file correctly..
I used the full unlock rom by lucifier. Nothing wrong with me. My fault on the incorrect flashing.
Click to expand...
Click to collapse
The big question is: Are the other partitions intact? biktor_gj has uploaded some dumps over at the development thread. You could try to flash the sdX3 Partition in OSX. However I think it is strange that Ubuntu wont recognise the device. You can use the df command to get all connected devices on Ubuntu.
ChrisKringel said:
The big question is: Are the other partitions intact? biktor_gj has uploaded some dumps over at the development thread. You could try to flash the sdX3 Partition in OSX. However I think it is strange that Ubuntu wont recognise the device. You can use the df command to get all connected devices on Ubuntu.
Click to expand...
Click to collapse
Im pretty darn sure the other partitions are still intacted as I only flashed the 3rd partition.
I know about the DF command. Yea, it doesn't show up in ubuntu. :/
Also, are the dumps he uploaded for the lumia 710?
wardoc22 said:
Im pretty darn sure the other partitions are still intacted as I only flashed the 3rd partition.
I know about the DF command. Yea, it doesn't show up in ubuntu. :/
Click to expand...
Click to collapse
That is really weird. I see two realistic options here:
a) Download the sdb9.rar posted by biktor_gj and flash it as IMG file on OSX
or
b) Ask for a repair of the device.
wardoc22 said:
Also, are the dumps he uploaded for the lumia 710?
Click to expand...
Click to collapse
I doubt it since he mentioned a 15GB partition. Do you own a Lumia 710?
ChrisKringel said:
That is really weird. I see two realistic options here:
a) Download the sdb9.rar posted by biktor_gj and flash it as IMG file on OSX
or
b) Ask for a repair of the device.
I doubt it since he mentioned a 15GB partition. Do you own a Lumia 710?
Click to expand...
Click to collapse
Yea, Tmobile agreed to send me in a new lumia 710.
I tried the df command in mac osx in terminal and the phone didnt show up. So I guess my only option is to try to revive it with an IMG of the 3rd partition of the device within disk utility. Since I am getting a new device anyways, might as well try to do whatever I can to contribute.
Do you have a 710? Would you mind uploading an image file for the 3rd partition for me?
wardoc22 said:
Yea, Tmobile agreed to send me in a new lumia 710.
I tried the df command in mac osx in terminal and the phone didnt show up. So I guess my only option is to try to revive it with an IMG of the 3rd partition of the device within disk utility. Since I am getting a new device anyways, might as well try to do whatever I can to contribute.
Do you have a 710? Would you mind uploading an image file for the 3rd partition for me?
Click to expand...
Click to collapse
I only own a Lumia 800 (with a locked bootloader). However there is a recovery flash method for the Lumia 800. You could try to adapt this method for the Lumia 710.
ChrisKringel said:
I only own a Lumia 800 (with a locked bootloader). However there is a recovery flash method for the Lumia 800. You could try to adapt this method for the Lumia 710.
Click to expand...
Click to collapse
NCS won't work with a phone that have qualcomm bootloader. I have a qualcomm bootloader on my lumia 710.
I can only flash it with QSPT, but I can't figure out how to work it.
wardoc22 said:
NCS won't work with a phone that have qualcomm bootloader. I have a qualcomm bootloader on my lumia 710.
I can only flash it with QSPT, but I can't figure out how to work it.
Click to expand...
Click to collapse
Some guys flashed their Qualcomm Lumia 800s with NCS wich resulted in an upgrade of their bootloader. According to you this is impossible with the unlocked phones so I guess you have to sent your device in for a repair.
The Images on NaviFirm sometimes contain IMGs of the partitions. You could also try your luck there.
1. My Phone does not vibrate. I charged it the whole night. I can't enter Qualcomm Mode.
2. I used Ubuntu 12.04 with dd if="FullUnlock-os-new.nb" of = "/def/sdd9". There was no output. I used the ROM provided here: ROM. Yes, I performed a Hardreset.
3. No, I don't think so. Yes, i created an image backup of every partition. I tried to recover my phone with the NCS. It did not find my Lumia.
My phone worked like a charme. Yesterday I installed Battery Status and started the Task Manager. My phone crashed, and after a restart it lagged. So I rebooted and now it won't start anymore. I think about sending it to Nokia, but maybe you can help me first.
MrGreenTea said:
1. My Phone does not vibrate. I charged it the whole night. I can't enter Qualcomm Mode.
2. I used Ubuntu 12.04 with dd if="FullUnlock-os-new.nb" of = "/def/sdd9". There was no output. I used the ROM provided here: ROM. Yes, I performed a Hardreset.
3. No, I don't think so. Yes, i created an image backup of every partition. I tried to recover my phone with the NCS. It did not find my Lumia.
My phone worked like a charme. Yesterday I installed Battery Status and started the Task Manager. My phone crashed, and after a restart it lagged. So I rebooted and now it won't start anymore. I think about sending it to Nokia, but maybe you can help me first.
Click to expand...
Click to collapse
If it does not turn on you can only get a replacement from your carrier or send it in for a repair. If you manage to enter the Qualcomm mode it would be possible to reflash the partitions, but I guess thats impossible since it wont turn on.
My phone doesn't vibrate too. I also noticed that probably all circuits used to charge the battery are actually driven by software (I used small LED to test it, after 10h of charging no light at all)
I also tried plugging in the USB charger without battery inside the device. no luck
Bootloader unlock through NCS went smooth, for dd'ing I used Windows 7 Home Premium x64(6.1.7601) with admin CLI
Command: dd if=c:\lum710rom.nb of=\\.\g:
...wrote about 1100 kBytes of data, then stopped and outputted errors
ChrisKringel said:
If it does not turn on you can only get a replacement from your carrier or send it in for a repair. If you manage to enter the Qualcomm mode it would be possible to reflash the partitions, but I guess thats impossible since it wont turn on.
Click to expand...
Click to collapse
Funny thing is, after like 5 hours plugged into my computer, it started the qualcomm mode and now I am reflashing the backed up partitions. Do I have to perform a hard reset after the reflash?
MrGreenTea said:
Funny thing is, after like 5 hours plugged into my computer, it started the qualcomm mode and now I am reflashing the backed up partitions. Do I have to perform a hard reset after the reflash?
Click to expand...
Click to collapse
I think you should do a hard reset.
I will also try having the phone connected for longer period of time, maybe that should be the solution to our problems!
rbusa said:
I think you should do a hard reset.
I will also try having the phone connected for longer period of time, maybe that should be the solution to our problems!
Click to expand...
Click to collapse
Yes, you can try that and I recommend using ubuntu for flashing with dd. You can install it easily with wubi and uninstall it as easy from within Windows.
EDIT: Just as I wanted to say it didn't work, it started I am so ****ing happy now, you would not believe
I was trying to downgrade my Lumia 710 and I got this error
Loading hashblock failed with ‘Messenger encountered error ‘Referencia a objeto no establecida como instancia de un objeto.’’
en Nokia.Wezen.Programming.SequenceLogic.HashLoader.C heckForErrors()
en Nokia.Wezen.Programming.SequenceLogic.ImageLoader. LoadBinaryData(ImageBinaryData binaryData, HashLoader hashLoader, ImageCertificate certificate)
en Nokia.Wezen.Programming.SequenceLogic.ImageLoader. LoadImageFile(ImageBinaryData binaryData, ImageCertificate writeCertificate)
en Nokia.Wezen.Programming.SequenceLogic.ProgrammingL ogic.ProgramImageFiles(EraseMethod eraseMethod)
en Nokia.Wezen.Programming.Programmer.Program()
en Nokia.Wezen.Product.Programming.FirmwareUpdate.Wez enFirmwareUpdate.Recovery()
en Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDial og.RecoveryDialogModel.Flash()
en Nokia.CareSuite.PlugIns.WezenRecovery.RecoveryDial og.RecoveryDialogModel.<HandleDownloadVariantPacka geCompleted>b__7(Object state)
Click to expand...
Click to collapse
I can power it, but it stays in Nokia
It vibratess when I hold the volume-down+power+camera button but i cant hard reset my phone
What's Qualcomm mode?
I used windows to flash it
I can't remember commands
rbusa said:
My phone doesn't vibrate too. I also noticed that probably all circuits used to charge the battery are actually driven by software (I used small LED to test it, after 10h of charging no light at all)
I also tried plugging in the USB charger without battery inside the device. no luck
Bootloader unlock through NCS went smooth, for dd'ing I used Windows 7 Home Premium x64(6.1.7601) with admin CLI
Command: dd if=c:\lum710rom.nb of=\\.\g:
...wrote about 1100 kBytes of data, then stopped and outputted errors
Click to expand...
Click to collapse
I would always recommend to use a Linux Distribution in order to apply the unlock. Windows has sometimes problems with partitioned removable devices. Did you manage to boot up in Qualcomm mode? I assume the Windows dd command wrote to the wrong partition.
MrGreenTea said:
Funny thing is, after like 5 hours plugged into my computer, it started the qualcomm mode and now I am reflashing the backed up partitions. Do I have to perform a hard reset after the reflash?
Click to expand...
Click to collapse
Always perform a hard reset after manipulating the OS partition.
rogelioc93 said:
I was trying to downgrade my Lumia 710 and I got this error
I can power it, but it stays in Nokia
It vibratess when I hold the volume-down+power+camera button but i cant hard reset my phone
What's Qualcomm mode?
I used windows to flash it
I can't remember commands
Click to expand...
Click to collapse
Does your device enter Qualcomm mode when you hold Vol Down+Power to power it on? You should be able to see it either popping up in your Explorer or in the Device Manager. Another method to hard reset the phone is:
1. Switch the phone off.
2. Press and hold the Volume Down, Power and Camera buttons at the same time.
3.When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held for a further five seconds.
ChrisKringel said:
Did you manage to boot up in Qualcomm mode? I assume the Windows dd command wrote to the wrong partition.
Click to expand...
Click to collapse
Well, I am not able to boot up in Qualcomm mode anymore...
rbusa said:
Well, I am not able to boot up in Qualcomm mode anymore...
Click to expand...
Click to collapse
If your phone won't power on you can either bring it to a Care Point and ask for reflashing or send it in for a repair.
Gyus, I need help - after downgrading FW from 12140 back to 12072, REFURBISH failed.
I used Nokia Care Suite.
Now, I have Lumia 800 stucks on Nokia logo and nothing works.
PC does not detect it, I tried resets, but w/o success.
It vibrates, but it stays on Nokia logo screen.
Please, can you help me?
I wanted to post in the development section, but it requires 10 posts or more.Thing is, I flashed it and all, NSS reported OS was written succesfully, but it won't boot past the Nokia screen.I tried hard resetting but it doesn't vibrate, it shows up as a NAND flash device in NSS,windows also picks it up so I guess it's alive.Thing is, how do I reflash it to its Original FW and Hard Reset it, it's a T-Mobile UK branded one.
http://forum.xda-developers.com/showthread.php?t=1587650
I used that Lumia 800 FullUnlock ROM.
Help is greatly appreciated, as this isn't my phone and I would have to pay 400 euros for a new one if this doesn't work.
try this:
- disconnect the phone from pc
- wait a minute or more
- keep pressing power button ~10 sec, then release it
- if it still doesn't powering, keep pressing vol up button, release it, then keep pressing power button.
mine is a tmobile uk, too. after the phone goes to OSBL mode, the only way to start phone normally, is through the method i described.
good luck!
I did that, still nothing, stuck on Nokia logo.The partitions are all shown, in NSS pro there are 1-8 partitions, in ubuntu there is sdc1-9.On which partition is the OS and on which is the bootloader?
lumia 800
you didnt flash the sdb3 partition you need to flash that in linux to get the phone to boot
http://forum.xda-developers.com/showpost.php?p=30009310&postcount=13
do that and you will be sorted
rob :good:
Oh my god bro, If you can show me how to do that(I used NSS Pro in order to flash the OS), i'll gladly appreciate it.
Also does this apply for rainbowmod only or for every ROM?
Steam. said:
Oh my god bro, If you can show me how to do that(I used NSS Pro in order to flash the OS), i'll gladly appreciate it.
Also does this apply for rainbowmod only or for every ROM?
Click to expand...
Click to collapse
you have to flash it using "dd" in linux.
Steam. said:
Oh my god bro, If you can show me how to do that(I used NSS Pro in order to flash the OS), i'll gladly appreciate it.
Also does this apply for rainbowmod only or for every ROM?
Click to expand...
Click to collapse
yes it does apply to rainbowmod and lumiamatrix
follow the help i posted here
http://forum.xda-developers.com/showpost.php?p=30009310&postcount=13
nss wont flash the sdb3 partition only the rom so you will have to flash in linux download a ubuntu cd and run it live when i flashed my lumia i didnt need to install linux i done it all from a live session
rob:good:
Thanks man, I fixed it.I installed rainbowmod, although it seems the GPS is not working with it, also Microsoft is not replying on my live activation key request.. other than that it ran and worked.Thanks again!
Ok people I need help.... I tried flashing a lumia 800 but mistakenly deleted the USB partition that came up on windows and now it is brick... It is no longer recognized by my system please I there any way round this foolish error... Thanks pls be kind in your choice of words...
chizzy500 said:
Ok people I need help.... I tried flashing a lumia 800 but mistakenly deleted the USB partition that came up on windows and now it is brick... It is no longer recognized by my system please I there any way round this foolish error... Thanks pls be kind in your choice of words...
Click to expand...
Click to collapse
to put it simply your phone is f**ked send it back to nokia for a replacement
Reflexdarky said:
to put it simply your phone is f**ked send it back to nokia for a replacement
Click to expand...
Click to collapse
pretty going off topic even on my own topic, but how do i boot the lumia into disk mode(mass storage) so i can send files via USB?Zune only allows videos/music/pics.
So .short story.i have a nokia lumia 800 rm 801,and dosn't boot anymore.i wen't to a repair shop and the guy over there said that the bootloader needs to be reinstalled because it's bricked,but he can't do it)
this is what's i've tried: leaving for few hours to charger/usb cable,didn't worked.
if i connect it to pc for few seconds i see in control panel,nokia dload and it discconect it.
i can start recovery mode( that windows phone with the computer cable thing on my phone if i connect the phone to charger or usb and press camera volume up and power) but i can't start recovery mode without data cable/charger.
when i connect the phone to charger it vibrate(nothing on the screen shows)if i press the power button for half a second i see the t-mobile logo.and keeps apearing and vibrating random times i guess i didn't counted exactly.(restart loop or something)
when i connect the phone to usb it vibrates long,and keep connecting to pc and discconecting.
when it's not connected to charger or usb,don't give any sparkle of life(no vibrating,powering on,nothing)
any help please?if anyone would be that kind to help me ,or give me enough advices to fix it by myself...
bump
noxified said:
bump
Click to expand...
Click to collapse
Ok, you also contacted me by pm and I'm trying to help you, but I don't have a Lumia 800 so I don't know all the difference between a Lumia 710 and a Lumia 800.
So in short, before I unlocked my phone I had a similar issue then which you are dealing now, what I did is disconnect the phone from the pc and pressed the camerabutton and keep it pressed, on the same time I pressed the on/off button once but keep holding the camerabutton, the phone shows the recovery mode, so I connected the phone with zune and reinstalled my backup, that's it.
(It's not neccesary to dis- and reconnect, but I only tell you the way I did it.)
If that doesn't work I think you must read this thread from bypx,
http://forum.xda-developers.com/showthread.php?t=1457341
Succesz,
and if i don't have the backup? cant i just use someone else's backup?(for nokia lumia 800 rm-801 ofcourse)
on that guide i don't have dead usb flasing...
and without dead phone usb flasing i get this error:
ERROR: OSBL reported an error! Code: 0x30022
and in linux if i connect it in recovery mode,it gives me this error:
unable to mount windows mobile error initializing camera: -105 Unknown model
and discconects automaticly from recovery mode,entering automaticly in that reboot loop.
i think that the bootloader it's faulty.
when i connecting the phone to zune i get this error: C101002E
And i don't have a backup for restoring...
Ok, I do some research and contact you asap
Greetz,
ok,i will wait.
bump
noxified said:
bump
Click to expand...
Click to collapse
stop bumping, pls. This won't speed up a solution!
if anyone has an idea, they will help you.
And i already told you via pm what i know.
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
noxified said:
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
Click to expand...
Click to collapse
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
whiperhack said:
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
Click to expand...
Click to collapse
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
noxified said:
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
Click to expand...
Click to collapse
Try on other service. IMO is a complicated procedure for an inexperienced guy.
Sent from my HTC Desire HD
i tried on 5 services...
Hi all,
I've got a Lumia 920 Cyan (RM-820) and it died during update. I had those problems before and I am familiar with Nokia Care suite and all hard reset procedures, but this time it won't respond to anything. Hard reset button combination doesn't make it vibrate and turn on. Holding volume down when sticking charger in doesn't work either. Charging screen won't appear. When connected via USB all my PCs fail to recognize this device( taking into account that other lumia 920 i have is recognized so drivers are installed correctly). Anyone has any ideas? Any forced flashing sw available?
you tried official Nokia Software Recovery Tool?
http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA142987
http://download.fds-ncom.nokia.com/...covery/NokiaSoftwareRecoveryToolInstaller.exe
dxdy said:
you tried official Nokia Software Recovery Tool?
http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA142987
http://download.fds-ncom.nokia.com/...covery/NokiaSoftwareRecoveryToolInstaller.exe
Click to expand...
Click to collapse
Sorry forgot to mention this one. Yes I tried this one along with Nokia Care Suite. Both won't detect a phone and ask for hard reset button combination. Combination doesnt work...
zoom2d said:
Sorry forgot to mention this one. Yes I tried this one along with Nokia Care Suite. Both won't detect a phone and ask for hard reset button combination. Combination doesnt work...
Click to expand...
Click to collapse
even if you select "My phone does not start up or respond"?
dxdy said:
even if you select "My phone does not start up or respond"?
Click to expand...
Click to collapse
Yes, even with this doesn't work
I've got one idea that might work... I thought that battery might not charge properly and phone could get stuck in discharged state. I'll try swapping a battery with a charged one and see if anything happens. It's all based on assumption that charging might not be working during update. If assumption is wrong it won't help i guess
Tried swapping batteries. Didn't help... Any other ideas?
Hi
zoom2d said:
Tried swapping batteries. Didn't help... Any other ideas?
Click to expand...
Click to collapse
Did you solved this? Im having the same issue :S
zoom2d said:
Hi all,
I've got a Lumia 920 Cyan (RM-820) and it died during update. I had those problems before and I am familiar with Nokia Care suite and all hard reset procedures, but this time it won't respond to anything. Hard reset button combination doesn't make it vibrate and turn on. Holding volume down when sticking charger in doesn't work either. Charging screen won't appear. When connected via USB all my PCs fail to recognize this device( taking into account that other lumia 920 i have is recognized so drivers are installed correctly). Anyone has any ideas? Any forced flashing sw available?
Click to expand...
Click to collapse
Have you tried using Navifirm and download compatible firmware for your 920 within your region and flash it using Nokia Care Suite? I wish I could post links but I am not able to yet.. If you have questions please PM me and Ill send you the link(s).
I've fixed a number of 920's by reflashing the OS.
shiznig said:
Have you tried using Navifirm and download compatible firmware for your 920 within your region and flash it using Nokia Care Suite? I wish I could post links but I am not able to yet.. If you have questions please PM me and Ill send you the link(s).
I've fixed a number of 920's by reflashing the OS.
Click to expand...
Click to collapse
Use Data Package Manager for DL the ROM, it is much faster.
Same Problem
I have the same problem with my Lumia 920 - RM 821.
Already tried all the tools of Nokia, but without results.
My Lumia has stopped completely and I can not fix it.
Same problem
Frustrated! Every time i find someone with the same problem the forum stops with no solution available. My Lumia 925 is not recognized by NCS, Phoenix or PC. Reset dos not work.
Guys, the last two posters, I have the same issue, and sad to break it to you, I think we have a hardware failure. Battery (my bet on this), display (I doubt) or something else died. If the battery swapping doesn't work, I am pretty sure something else is gone, could be anything. Something as simple as the charging pin too.
Does anyone still have the software Navifirm and Nokia care suite they could share? My 920 is stuck in a reboot loop, I've tried the hard reset (hold volume down and power, wait for vibrate, release power, should see exclamation mark), but it just loops between off (3sec) and the NOKIA word (3sec) while I hold vol down . Thanks.
No matter, followed the instructions at https://forum.xda-developers.com/showthread.php?t=2515453 which has got it working.