So .short story.i have a nokia lumia 800 rm 801,and dosn't boot anymore.i wen't to a repair shop and the guy over there said that the bootloader needs to be reinstalled because it's bricked,but he can't do it)
this is what's i've tried: leaving for few hours to charger/usb cable,didn't worked.
if i connect it to pc for few seconds i see in control panel,nokia dload and it discconect it.
i can start recovery mode( that windows phone with the computer cable thing on my phone if i connect the phone to charger or usb and press camera volume up and power) but i can't start recovery mode without data cable/charger.
when i connect the phone to charger it vibrate(nothing on the screen shows)if i press the power button for half a second i see the t-mobile logo.and keeps apearing and vibrating random times i guess i didn't counted exactly.(restart loop or something)
when i connect the phone to usb it vibrates long,and keep connecting to pc and discconecting.
when it's not connected to charger or usb,don't give any sparkle of life(no vibrating,powering on,nothing)
any help please?if anyone would be that kind to help me ,or give me enough advices to fix it by myself...
bump
noxified said:
bump
Click to expand...
Click to collapse
Ok, you also contacted me by pm and I'm trying to help you, but I don't have a Lumia 800 so I don't know all the difference between a Lumia 710 and a Lumia 800.
So in short, before I unlocked my phone I had a similar issue then which you are dealing now, what I did is disconnect the phone from the pc and pressed the camerabutton and keep it pressed, on the same time I pressed the on/off button once but keep holding the camerabutton, the phone shows the recovery mode, so I connected the phone with zune and reinstalled my backup, that's it.
(It's not neccesary to dis- and reconnect, but I only tell you the way I did it.)
If that doesn't work I think you must read this thread from bypx,
http://forum.xda-developers.com/showthread.php?t=1457341
Succesz,
and if i don't have the backup? cant i just use someone else's backup?(for nokia lumia 800 rm-801 ofcourse)
on that guide i don't have dead usb flasing...
and without dead phone usb flasing i get this error:
ERROR: OSBL reported an error! Code: 0x30022
and in linux if i connect it in recovery mode,it gives me this error:
unable to mount windows mobile error initializing camera: -105 Unknown model
and discconects automaticly from recovery mode,entering automaticly in that reboot loop.
i think that the bootloader it's faulty.
when i connecting the phone to zune i get this error: C101002E
And i don't have a backup for restoring...
Ok, I do some research and contact you asap
Greetz,
ok,i will wait.
bump
noxified said:
bump
Click to expand...
Click to collapse
stop bumping, pls. This won't speed up a solution!
if anyone has an idea, they will help you.
And i already told you via pm what i know.
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
noxified said:
i tought if i was bumping someone would see the topic ,who know how to do it.
ok,i have borrowed atf box.what's next?
Click to expand...
Click to collapse
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
whiperhack said:
If you think that you can do it by yourself, search the tutorial for unlock the phone with the ATF box. If not, do like me: go in a service center for phones, pay 13 euro, and in 30 minutes you go home with the phone done ok without any complications. I changed in service my bootloader from dload to qualcomm.
Sent from my HTC Desire HD
Click to expand...
Click to collapse
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
noxified said:
I tryed at a service,money ain't a problem.The guy over there couldn't do it.
Click to expand...
Click to collapse
Try on other service. IMO is a complicated procedure for an inexperienced guy.
Sent from my HTC Desire HD
i tried on 5 services...
Related
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
I've a Lumia 800 I've followed the guide for Full unlock with NSS but I don't have any "Nokia Connectivity" in NSS!!! PLEASEE HELP!
UP UP UP
Stay Calm
first try searching in the thread for a similar problem followed by a solution, in the worst scenario, then try asking in a thread with a specific Title.
rafa8595 said:
first try searching in the thread for a similar problem followed by a solution, in the worst scenario, then try asking in a thread with a specific Title.
Click to expand...
Click to collapse
is 3 days serach! Cant install qualcomm driver
are you sure that you can install the qualcomm? in my lumia 800 i cant use the qualcomm because my hardware revision ends with a "2.4"
make sure that your lumia is not 2.4.
On a pc driver or a mac
Sent from my Lumia 800 using XDA Windows Phone 7 App
asmanthebell said:
On a pc driver or a mac
Sent from my Lumia 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Revision 2.3
This is what i get when try to flas .nb files!
sub078 said:
I've a Lumia 800 I've followed the guide for Full unlock with NSS but I don't have any "Nokia Connectivity" in NSS!!! PLEASEE HELP!
Click to expand...
Click to collapse
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
ChrisKringel said:
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
Click to expand...
Click to collapse
Nothing to do! Qualcom dont installed! NO DRIVER NO FLASH! I sell this phone on monday and roll back to Android!
Check under C:\programfiles\nokia\ncs\drivers install all of the files in there then goto your drivers page on windows an right click and hit install drivers. If it says cannot be found. PM your Skype and I will try and help you further.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Someone can explaine the EXACT procedure to access to download mode on lumia 800? nothing seem to work! VOL UP and power, VOL DOWN and power.... nothing! Please explaine me the EXACT procedure!
try to flash using linux.
i also flashed my first customrom using dd in ubuntu.
have a look at my thread that i created when i tried to flash, it might help u too: http://forum.xda-developers.com/showthread.php?t=1698272
cheers
sub078 said:
Someone can explaine the EXACT procedure to access to download mode on lumia 800? nothing seem to work! VOL UP and power, VOL DOWN and power.... nothing! Please explaine me the EXACT procedure!
Click to expand...
Click to collapse
Vol UP and power, if it does a short vibration and shows a Qualcomm Storage device on Windows, and Windows asks you to format the device (which you click cancel)/this device shows on diskmgmt.msc or diskpart, THEN you have a flasheable device.
If you do Vol UP and power, and it does a long vibration and boots Windows Phone, you have the weird bootloader.
If you do Vol UP and power, and it does a short vibration and Windows recognizes the device as Nokia DLOAD, you have the new bootloader.
You actually don't need any driver if your Lumia is able to be flashed. Qualcomm drivers are needed only for development purposes.
rescbr said:
Vol UP and power, if it does a short vibration and shows a Qualcomm Storage device on Windows, and Windows asks you to format the device (which you click cancel)/this device shows on diskmgmt.msc or diskpart, THEN you have a flasheable device.
If you do Vol UP and power, and it does a long vibration and boots Windows Phone, you have the weird bootloader.
If you do Vol UP and power, and it does a short vibration and Windows recognizes the device as Nokia DLOAD, you have the new bootloader.
You actually don't need any driver if your Lumia is able to be flashed. Qualcomm drivers are needed only for development purposes.
Click to expand...
Click to collapse
O MOTHER OF GOD! Thank u! REALLY THANK U
I have the weird bootloader.... what can I do?
sub078 said:
is 3 days serach! Cant install qualcomm driver
Click to expand...
Click to collapse
ChrisKringel said:
Are you sure that they should reside in NSS? As far as I know the Nokia Care Suite, NCS comes with some drivers as well... You might wanna try those...
Click to expand...
Click to collapse
There is no such thing as a qualcomm driver. It is the end of the line....read Help i brick my lumia
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
sub078 said:
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
Click to expand...
Click to collapse
Unfortunately nothing.
sub078 said:
So... finally with fuk*/+-^%&$ing bootloader what can I do? Nothing?
Click to expand...
Click to collapse
My advice is to bring it to NOKIA CARE repair center and i hope you still have warranty with your lumia. If none, you can still have them reflash it. Thats the only option left to do.:angel: trust me i've been dealing with this issue for almost a month now. Ive gone to every 3rd party cellphone repair service but no luck.
Hi, i would need some help or tips to get my phone running, i woke up today and tried to send some texts, then it said no service so i thought rebooting would be a good idea, but no. Now it wont start again and its not even recognized by my comp. Its a Nokia Lumia 800 and ive flashed it with the International Rom with the internet sharing update (cant remember the number). Suggestions?
Regards. Fellu
maybe charging it would be a good idea
FelluRan said:
Hi, i would need some help or tips to get my phone running, i woke up today and tried to send some texts, then it said no service so i thought rebooting would be a good idea, but no. Now it wont start again and its not even recognized by my comp. Its a Nokia Lumia 800 and ive flashed it with the International Rom with the internet sharing update (cant remember the number). Suggestions?
Regards. Fellu
Click to expand...
Click to collapse
Try recover your phone with ncs (if it enter in bootloader mode)
if you cannot acsess to bootloader (nokia dload) it will be good idea to charge your phone
That's exactly how my Lumia died, it was not recoverable, I had to get it replaced under warranty.
Hi all,
I've got a Lumia 920 Cyan (RM-820) and it died during update. I had those problems before and I am familiar with Nokia Care suite and all hard reset procedures, but this time it won't respond to anything. Hard reset button combination doesn't make it vibrate and turn on. Holding volume down when sticking charger in doesn't work either. Charging screen won't appear. When connected via USB all my PCs fail to recognize this device( taking into account that other lumia 920 i have is recognized so drivers are installed correctly). Anyone has any ideas? Any forced flashing sw available?
you tried official Nokia Software Recovery Tool?
http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA142987
http://download.fds-ncom.nokia.com/...covery/NokiaSoftwareRecoveryToolInstaller.exe
dxdy said:
you tried official Nokia Software Recovery Tool?
http://www.nokia.com/us-en/support/faq/?action=singleTopic&topic=FA142987
http://download.fds-ncom.nokia.com/...covery/NokiaSoftwareRecoveryToolInstaller.exe
Click to expand...
Click to collapse
Sorry forgot to mention this one. Yes I tried this one along with Nokia Care Suite. Both won't detect a phone and ask for hard reset button combination. Combination doesnt work...
zoom2d said:
Sorry forgot to mention this one. Yes I tried this one along with Nokia Care Suite. Both won't detect a phone and ask for hard reset button combination. Combination doesnt work...
Click to expand...
Click to collapse
even if you select "My phone does not start up or respond"?
dxdy said:
even if you select "My phone does not start up or respond"?
Click to expand...
Click to collapse
Yes, even with this doesn't work
I've got one idea that might work... I thought that battery might not charge properly and phone could get stuck in discharged state. I'll try swapping a battery with a charged one and see if anything happens. It's all based on assumption that charging might not be working during update. If assumption is wrong it won't help i guess
Tried swapping batteries. Didn't help... Any other ideas?
Hi
zoom2d said:
Tried swapping batteries. Didn't help... Any other ideas?
Click to expand...
Click to collapse
Did you solved this? Im having the same issue :S
zoom2d said:
Hi all,
I've got a Lumia 920 Cyan (RM-820) and it died during update. I had those problems before and I am familiar with Nokia Care suite and all hard reset procedures, but this time it won't respond to anything. Hard reset button combination doesn't make it vibrate and turn on. Holding volume down when sticking charger in doesn't work either. Charging screen won't appear. When connected via USB all my PCs fail to recognize this device( taking into account that other lumia 920 i have is recognized so drivers are installed correctly). Anyone has any ideas? Any forced flashing sw available?
Click to expand...
Click to collapse
Have you tried using Navifirm and download compatible firmware for your 920 within your region and flash it using Nokia Care Suite? I wish I could post links but I am not able to yet.. If you have questions please PM me and Ill send you the link(s).
I've fixed a number of 920's by reflashing the OS.
shiznig said:
Have you tried using Navifirm and download compatible firmware for your 920 within your region and flash it using Nokia Care Suite? I wish I could post links but I am not able to yet.. If you have questions please PM me and Ill send you the link(s).
I've fixed a number of 920's by reflashing the OS.
Click to expand...
Click to collapse
Use Data Package Manager for DL the ROM, it is much faster.
Same Problem
I have the same problem with my Lumia 920 - RM 821.
Already tried all the tools of Nokia, but without results.
My Lumia has stopped completely and I can not fix it.
Same problem
Frustrated! Every time i find someone with the same problem the forum stops with no solution available. My Lumia 925 is not recognized by NCS, Phoenix or PC. Reset dos not work.
Guys, the last two posters, I have the same issue, and sad to break it to you, I think we have a hardware failure. Battery (my bet on this), display (I doubt) or something else died. If the battery swapping doesn't work, I am pretty sure something else is gone, could be anything. Something as simple as the charging pin too.
Does anyone still have the software Navifirm and Nokia care suite they could share? My 920 is stuck in a reboot loop, I've tried the hard reset (hold volume down and power, wait for vibrate, release power, should see exclamation mark), but it just loops between off (3sec) and the NOKIA word (3sec) while I hold vol down . Thanks.
No matter, followed the instructions at https://forum.xda-developers.com/showthread.php?t=2515453 which has got it working.
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse