Related
Thanks for your reply. Ok i was rooting two phones one with succes and the other Iam stuck in a bootloop. I used Z4root 1.30 to root . Installed rom manager etc. Made a copy of the system. But the second phone cant restore my nandroid it says its there and does the whole process, But when i turn on the phone it doesnt present the factory bootloop its just get stuck with the rom it flashed. The phone thats working I flashed the axura rom the other was simply amazing 2.5 that got stuck. I can access the clock -recovery menu I have tried to install the rom and restore my nandroid, but none work. What can I do thanks?
Ps Is there a way that i can access the internal phone memory to put a new rom to flash to?
Kamaleon said:
Thanks for your reply. Ok i was rooting two phones one with succes and the other Iam stuck in a bootloop. I used Z4root 1.30 to root . Installed rom manager etc. Made a copy of the system. But the second phone cant restore my nandroid it says its there and does the whole process, But when i turn on the phone it doesnt present the factory bootloop its just get stuck with the rom it flashed. The phone thats working I flashed the axura rom the other was simply amazing 2.5 that got stuck. I can access the clock -recovery menu I have tried to install the rom and restore my nandroid, but none work. What can I do thanks?
Ps Is there a way that i can access the internal phone memory to put a new rom to flash to?
Click to expand...
Click to collapse
odin back to stock re root and flash again. Have you tried using the toolbox?
http://forum.xda-developers.com/showthread.php?t=954509
So you CAN enter Recovery Mode? If Yes, you can try to flash another rom, or factory reset it, which usually works. If that doesn't work theres 1 more thing to try and this will work.
Download mode.
Odin.
Stock JFD
Off you go to flashing 600 more roms daily
xriderx66 said:
So you CAN enter Recovery Mode? If Yes, you can try to flash another rom, or factory reset it, which usually works. If that doesn't work theres 1 more thing to try and this will work.
Download mode.
Odin.
Stock JFD
Off you go to flashing 600 more roms daily
Click to expand...
Click to collapse
Agree With Factory Reset, i have donde that before and it works
So.. I was using my phone normally .. but suddenly my phone went very very slow and then I turned off... I was running Unnamed rom.
But here is the deal , the phone didnt woke up! I mean , The phone got stucked into a boot loop , So I treid to enter into recovery with no luck!... Then I managed to go into download mode without any problem.
So after that I restored the phone to stock (One click root odin) . BUT the phone is still showing the Galaxy S Screen Boot loop.
HELP!
I´ve tried many things.. 2 Laptops and PC´s , ports , etc.. I also removed the sim card and the micro sd , but that didnt do anything.
So , any suggestion?
PS: Sorry 4 my english
I'm going to assume that you flashed UCKH7, either the stock without root, or the stock with root one click downloader. If you flashed something different than one of these, let me know.
Since you flashed the stock package successfully, you should now be able to get into 3e recovery by holding vol+ vol- and power buttons. Once in 3e recovery, you should do a wipe data/factory reset and your phone should then boot normally.
If you are unable to get into 3e recovery, then there is some sort of unusual problem, so post back here and we'll try to find out what it is.
creepyncrawly said:
I'm going to assume that you flashed UCKH7, either the stock without root, or the stock with root one click downloader. If you flashed something different than one of these, let me know.
Since you flashed the stock package successfully, you should now be able to get into 3e recovery by holding vol+ vol- and power buttons. Once in 3e recovery, you should do a wipe data/factory reset and your phone should then boot normally.
If you are unable to get into 3e recovery, then there is some sort of unusual problem, so post back here and we'll try to find out what it is.
Click to expand...
Click to collapse
Yes , I flashed UCKH7 BUT Im still with the bootloop.. There isnt any way I can get into recovery.. This is the first time I see a problem like this.
So..?
Thanks 4 ur response
mca1490 said:
Yes , I flashed UCKH7 BUT Im still with the bootloop.. There isnt any way I can get into recovery.. This is the first time I see a problem like this.
So..?
Thanks 4 ur response
Click to expand...
Click to collapse
If you can't get into recovery using the three button technique then there is something seriously wrong with your phone.
Sent from my HTC One X using Tapatalk 2
Yes... I'm thinking possible hardware issue. But since you can still get download mode, I'd try flashing the full stock package which you can get from the Download Repository. The one you already flashed did not contain the bootloaders and other stuff. If that doesn't clear it up, then I'm thinking repair or replace.
Noob question.. Where I can find the download repository?
thanks
mca1490 said:
Noob question.. Where I can find the download repository?
thanks
Click to expand...
Click to collapse
Bookmark this.
http://forum.xda-developers.com/showthread.php?t=1532368
lol.. thank u! ,)
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks
Hi guys, I've got the European version of the Galaxy player 3.6, and I'm stuck on recovery: The home button doesn't work, and I believe it's because I flashed 4.2 kernel by mistake, when on android 2.3.6. I can't turn it on, because it loads up the recovery menu. I have tried to search for this issue but I haven't found an answer, so I posted it here, is there anything I can do or is this dead for good? Thanks in advance
Sparkles SP said:
Hi guys, I've got the European version of the Galaxy player 3.6, and I'm stuck on recovery: The home button doesn't work, and I believe it's because I flashed 4.2 kernel by mistake, when on android 2.3.6. I can't turn it on, because it loads up the recovery menu. I have tried to search for this issue but I haven't found an answer, so I posted it here, is there anything I can do or is this dead for good? Thanks in advance
Click to expand...
Click to collapse
Then reflash a 3.6 kernel on ODIN mode. The one by zaclimon.
kryptonify said:
Then reflash a 3.6 kernel on ODIN mode. The one by zaclimon.
Click to expand...
Click to collapse
I'm getting : "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" and doesn't look like I can access the download mode.. I also went on to the kies but it won't recognize my device.. and I've got all the drivers installed
Sparkles SP said:
I'm getting : "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" and doesn't look like I can access the download mode.. I also went on to the kies but it won't recognize my device.. and I've got all the drivers installed
Click to expand...
Click to collapse
Have you tried this solution by androthan http://forum.xda-developers.com/showthread.php?t=2308221?
kryptonify said:
Have you tried this solution by androthan http://forum.xda-developers.com/showthread.php?t=2308221?
Click to expand...
Click to collapse
Thanks, I will give this a try. I'll let you know how it goes
I can get to that first download menu, but everytime I try to press volume up, it sends me back to the Firmware upgrade screen..
Sparkles SP said:
I can get to that first download menu, but everytime I try to press volume up, it sends me back to the Firmware upgrade screen..
Click to expand...
Click to collapse
I never had this 'firmware upgrade' problem before. So im not really familiar to it. Where exactly is the firmware upgrade screen showing in the device or in odin?
kryptonify said:
I never had this 'firmware upgrade' problem before. So im not really familiar to it. Where exactly is the firmware upgrade screen showing in the device or in odin?
Click to expand...
Click to collapse
It's on the device.. Uhm it's basically something that appears whenever I turn on the phone, I can't access recovery or anything else, I can get to the part where it asks me to press vol up, but when I let go of the other buttons to press vol up it goes to the firmware screen, and I've tried almost everything, I tried not letting go, pressing volume first then letting go, trying to outspeed it, but it just won't work
Sparkles SP said:
It's on the device.. Uhm it's basically something that appears whenever I turn on the phone, I can't access recovery or anything else, I can get to the part where it asks me to press vol up, but when I let go of the other buttons to press vol up it goes to the firmware screen, and I've tried almost everything, I tried not letting go, pressing volume first then letting go, trying to outspeed it, but it just won't work
Click to expand...
Click to collapse
Hmm, I dont really know what else to add to this. Maybe try using adb to get to download mode.
And what exactly the kernel you try to flash? Can you link it?
kryptonify said:
Hmm, I dont really know what else to add to this. Maybe try using adb to get to download mode.
And what exactly the kernel you try to flash? Can you link it?
Click to expand...
Click to collapse
Yes, it was this one :
http://forum.xda-developers.com/showpost.php?p=39342399&postcount=1
at first the touchscreen didnt work, I don't really remember what I did after that and then just got stuck on recovery, now I cant even access recovery..
How do I use ADB?
EDIT, I flashed a stock rom with odin, but the kernel is probably still wrong, since I can't use the touchscreen.. but not stuck at that firmware thing anymore.. I'll try flash the kernel you recommended
EDIT 2: I can't flash it for some reason, it gets stuck at NAND Write Start!! any other kernels you can recommend?
Sparkles SP said:
Yes, it was this one :
http://forum.xda-developers.com/showpost.php?p=39342399&postcount=1
at first the touchscreen didnt work, I don't really remember what I did after that and then just got stuck on recovery, now I cant even access recovery..
How do I use ADB?
EDIT, I flashed a stock rom with odin, but the kernel is probably still wrong, since I can't use the touchscreen.. but not stuck at that firmware thing anymore.. I'll try flash the kernel you recommended
EDIT 2: I can't flash it for some reason, it gets stuck at NAND Write Start!! any other kernels you can recommend?
Click to expand...
Click to collapse
So, you can get to download mode? Then you shouldve flashed the kernel first. And then flash stock rom through recovery mode! You dont flash a rom with odin.
ok, so where is that NAND write start showing? if its on ODIN. use another odin version, try this one by androthan http://www.mediafire.com/download/82latn22s1kl7w2/andromint-Odin3-v1.85.zip
built especially for YP-GS1 eu.
Then flash stock kernel by zaclimon. Then boot to recovery and flash stock rom through recovery.
Heres another kernel http://forum.xda-developers.com/showthread.php?p=43190038#post43190038 but that kernel is just for that exact rom. And some other features not working. Check out the thread!
kryptonify said:
So, you can get to download mode? Then you shouldve flashed the kernel first. And then flash stock rom through recovery mode! You dont flash a rom with odin.
ok, so where is that NAND write start showing? if its on ODIN. use another odin version, try this one by androthan http://www.mediafire.com/download/82latn22s1kl7w2/andromint-Odin3-v1.85.zip
built especially for YP-GS1 eu.
Then flash stock kernel by zaclimon. Then boot to recovery and flash stock rom through recovery.
Heres another kernel http://forum.xda-developers.com/showthread.php?p=43190038#post43190038 but that kernel is just for that exact rom. And some other features not working. Check out the thread!
Click to expand...
Click to collapse
Thanks mate, I'll let you know how it goes!
EDIT: I'm flashing a lot of kernels now, trying to get one that works, but no luck, what would I have to do, step by step? I have a stock rom that I flashed with odin.. no touchscreen or buttons working (except for the power button)
Sparkles SP said:
Thanks mate, I'll let you know how it goes!
EDIT: I'm flashing a lot of kernels now, trying to get one that works, but no luck, what would I have to do, step by step? I have a stock rom that I flashed with odin.. no touchscreen or buttons working (except for the power button)
Click to expand...
Click to collapse
Open odin v1.85
Press PDA, select kernel, .tar file (this kernel by zaclimon http://forum.xda-developers.com/showthread.php?t=2198234 )
Power off device then go to download mode
Click start on Odin.
Now you should be able to boot to recovery.
Wipe cache, data, factory , dalvik
Download stock rom ( http://forum.xda-developers.com/devdb/project/dl/?id=7404 ) then copy to device
On recovery, select install zip from sdcard, select stock rom ^
Reboot.
kryptonify said:
Open odin v1.85
Press PDA, select kernel, .tar file (this kernel by zaclimon http://forum.xda-developers.com/showthread.php?t=2198234 )
Power off device then go to download mode
Click start on Odin.
Now you should be able to boot to recovery.
Wipe cache, data, factory , dalvik
Download stock rom ( http://forum.xda-developers.com/devdb/project/dl/?id=7404 ) then copy to device
On recovery, select install zip from sdcard, select stock rom ^
Reboot.
Click to expand...
Click to collapse
I flashed the kernel with odin, but after i got a screen saying samsung, with an error icon or something on the bottom.. and didn't go to recovery, it then booted into the rom I have.. is there a way to get into recovery on this device? I have tried a lot of common button combinations but no luck..
Sparkles SP said:
I flashed the kernel with odin, but after i got a screen saying samsung, with an error icon or something on the bottom.. and didn't go to recovery, it then booted into the rom I have.. is there a way to get into recovery on this device? I have tried a lot of common button combinations but no luck..
Click to expand...
Click to collapse
So your phone is unbricked now? Pressing Home + Volume up + Power button is the proper mode in booting to recovery mode. Or if you could access internet on the device, install some apps that let you boot to recovery mode (like the RebootManager). The error at the samsung boot logo is perfectly normal!
kryptonify said:
So your phone is unbricked now? Pressing Home + Volume up + Power button is the proper mode in booting to recovery mode. Or if you could access internet on the device, install some apps that let you boot to recovery mode (like the RebootManager). The error at the samsung boot logo is perfectly normal!
Click to expand...
Click to collapse
The touchscreen still doesnt work though.. I got to the recovery, but the home button doesn't work.. so I can't select wipe data, and I've also tried the power button which didn't work
Sparkles SP said:
The touchscreen still doesnt work though.. I got to the recovery, but the home button doesn't work.. so I can't select wipe data, and I've also tried the power button which didn't work
Click to expand...
Click to collapse
I think theres something wrong with the device itself not the software. Hardware buttons difficulties I suppose.
kryptonify said:
I think theres something wrong with the device itself not the software. Hardware buttons difficulties I suppose.
Click to expand...
Click to collapse
It worked before I messed up the 4.2 kernel.. so I don't think it can't be the hardware.. Also the power button works to boot into download mode and recovery..
Sparkles SP said:
It worked before I messed up the 4.2 kernel.. so I don't think it can't be the hardware.. Also the power button works to boot into download mode and recovery..
Click to expand...
Click to collapse
Hmm, interesting. Ill try to flash the 4.2 kernel on my own device, and Ill take a look myself. haha i got lots of free time
kryptonify said:
Hmm, interesting. Ill try to flash the 4.2 kernel on my own device, and Ill take a look myself. haha i got lots of free time
Click to expand...
Click to collapse
hahaha uhm, be careful though! I'm certain there's a way to fix it, but since we don't know it.. Would a restore of a back up fix the problem? (curiosity, since I can't even do that )
i installed cm13 custom rom in my s3 then with twrp. it worked fine then i factory reset my phone then it starts with twrp screen and screen flashes and again twrp screen comes(screen with twrp written not options).i can just go to odin mode. what to do now
please help!!!!!
Never factory reset from a custom ROM. It is recommended to do it from recovery. Your reset has wiped too much including important parts of the OS. Flash another copy again.
I tried to downgrade my galaxy r but i cant and i am stuck into twrp.PLEASE HELP ME TO FIX THIS!!!
admirk61 said:
I tried to downgrade my galaxy r but i cant and i am stuck into twrp.PLEASE HELP ME TO FIX THIS!!!
Click to expand...
Click to collapse
Go the the forum designated for your device, do not ask here.
As for your question, please flash your stock ROM again. Make sure to follow the steps properly and be very patient.
How to do it
Jericho Arcelao said:
Never factory reset from a custom ROM. It is recommended to do it from recovery. Your reset has wiped too much including important parts of the OS. Flash another copy again.
Click to expand...
Click to collapse
Thanks for ur concern but i cannot open my recovery it is just teamwin written on screen any other method plse describe.
Maybe it is just loading? If after waiting for 5 mins. can you enter recovery? If not can you enter download mode? If yes then download a copy of the stock rom from here and flash it via ODIN.
Jericho Arcelao said:
Go the the forum designated for your device, do not ask here.
As for your question, please flash your stock ROM again. Make sure to follow the steps properly and be very patient.
Click to expand...
Click to collapse
I tried to restore my stock system that I backed up but when I finish it,it isnt rebooted into system.It reboots into recovery.
admirk61 said:
I tried to restore my stock system that I backed up but when I finish it,it isnt rebooted into system.It reboots into recovery.
Click to expand...
Click to collapse
Go ask your problem here:
http://forum.xda-developers.com/galaxy-r
ive got this problem with my s3 so can i ask on here?
How do I get into Odin mode? Every time I try to hold power, home and volume down it just flashes the Samsung logo and then goes into recovery when I release the buttons, no download mode
EDIT: just solved it. Seems I didn't press the volume button "down" enough.