Hey all,
Alright so i seen the update today for ICS, phone was rooted but stock rom.
During my first update attempt i got a phone call while it said please wait. Phone crashed and couldnt get out of recovery.
So i went home and flashed back to stock using odin. everything worked fine. was prompted again to update so i did.
This time it went through the process but got hung up at the samsung boot screen.
So i tried to flash back to stock again but now once it boots i get a force close on everything.
Any help would be appreciated. Thank you in advance!
adamtrace said:
Hey all,
Alright so i seen the update today for ICS, phone was rooted but stock rom.
During my first update attempt i got a phone call while it said please wait. Phone crashed and couldnt get out of recovery.
So i went home and flashed back to stock using odin. everything worked fine. was prompted again to update so i did.
This time it went through the process but got hung up at the samsung boot screen.
So i tried to flash back to stock again but now once it boots i get a force close on everything.
Any help would be appreciated. Thank you in advance!
Click to expand...
Click to collapse
do a factory reset...and when you do updating take your sim card out so no
Interruptions
bigjoe2675 said:
do a factory reset...and when you do updating take your sim card out so no
Interruptions
Click to expand...
Click to collapse
i was out and impatient so i just did it over data. should have also mentioned i cant get into recovery to factory reset.
adamtrace said:
i was out and impatient so i just did it over data. should have also mentioned i cant get into recovery to factory reset.
Click to expand...
Click to collapse
lol....as you see impatient...leads to horror....LOL
I would odin back to gb stock...kill all, then to do the ics update....for a clean fresh load...just me...I kill my load in a heart beat, reload up in running within minutes...
I would take the sim out when going to the ics update...just in case someone calls you...
me I dont have that issue...no one calls me....just the kids for $$$ and I dont answer....LOL
bigjoe2675 said:
lol....as you see impatient...leads to horror....LOL
I would odin back to gb stock...kill all, then to do the ics update....for a clean fresh load...just me...I kill my load in a heart beat, reload up in running within minutes...
I would take the sim out when going to the ics update...just in case someone calls you...
me I dont have that issue...no one calls me....just the kids for $$$ and I dont answer....LOL
Click to expand...
Click to collapse
thats where my problem is now. i have gone back to stock through odin. the phone boots up fine. then when i unlock the screen i get a ton of force close messages. all major force closes too like tw.
adamtrace said:
thats where my problem is now. i have gone back to stock through odin. the phone boots up fine. then when i unlock the screen i get a ton of force close messages. all major force closes too like tw.
Click to expand...
Click to collapse
Is your SD card back in?
SamsungGalaxyStig said:
Is your SD card back in?
Click to expand...
Click to collapse
yes. never took it out.
adamtrace said:
thats where my problem is now. i have gone back to stock through odin. the phone boots up fine. then when i unlock the screen i get a ton of force close messages. all major force closes too like tw.
Click to expand...
Click to collapse
just seen that you took your sd card or sim card out for this last odin...sd..?
ok,
FC means your old apps are still there cause the fc....? the odin did not clean out the apps....?
you can update to ics via kies? I would put cwm on...go in and wipe all them put phone into download and update thru kies...?
I updated thru kies in download mode....
I am just throwing some ideas out for you....kk
bigjoe2675 said:
just seen that you took your sd card or sim card out for this last odin...sd..?
ok,
FC means your old apps are still there cause the fc....? the odin did not clean out the apps....?
you can update to ics via kies? I would put cwm on...go in and wipe all them put phone into download and update thru kies...?
I updated thru kies in download mode....
I am just throwing some ideas out for you....kk
Click to expand...
Click to collapse
must have been a miscommunication. havent taken it out for any flashs.
cant tell what is installed as far as apps. all i get are the force closes.
ill give the kies a try.
You can fix this
XDA is no longer worth my time.
TimOster said:
It's easy,
Put the phone in download mode with USB NOT connected.
Start Kies
Plug in the USB, don't worry if it's not connected...doesn't need to be..
Go to Tools > Firmware Upgrade and Initialization
This will get the latest version of FW on your phone. It wipes all, but since you are stuck and can't do a backup anyway...just do it.
Tim
Click to expand...
Click to collapse
says galaxy note does not support initializing
BUMP!
Fixed...
any progress?????
hey i was just wondering if youve had any progress??? as i have exactly the same problem and im out of ideas lol? lol thanks
Dangry said:
I'm having the same (sort of) issue. soft brick stuck at samsung after an attempted root w/odin and now kies wont let me do a fix my firmware either. Ive searched, followed instructions yet still stuck at the "samsung" screen. I can get into CW and download screens but it doesn't seem to be helping.....
Click to expand...
Click to collapse
I
Dangry said:
I'm having the same (sort of) issue. soft brick stuck at samsung after an attempted root w/odin and now kies wont let me do a fix my firmware either. Ive searched, followed instructions yet still stuck at the "samsung" screen. I can get into CW and download screens but it doesn't seem to be helping.....
Click to expand...
Click to collapse
If you can get to CWM as you say ...
Simply restore a backup.....
If you have one....and if not ....flash a new rom.
If no rom exists ...pull your SD card and use an adapter to put one there from PC...
That's all I've got for tonight ....g
Related
ok, I need some help here..
was running rooted ics roms for weeks now, and was trying to go to the new cm 9 nightly today.
I was using twrp for recovery, and it would not flash that way, so I went back to cwm recovery.
Then, I tried to flash h0tw1r3's version of cm9 first, then I would flash the new cm 9 nightly; never got to that point..
After flashing that, i went into a boot loop, so i want back to cwm, and tried to wipe, and flash it again, but I got locked up in cwm, with no menus at all..
Well, I decided to just Odin back to factory, which didn't work; both rooted stock GB, and unrooted stock GB...I am not a veteran of odin,and, since I am on a mac, I ran it in a virtual machine, the same way I originally did it when I got the phone months ago. It goes through all the steps that make it look like it worked, but, once the phone reboots, I get the first and second "samsung" screens, but then the screen just stays black, and nothing happens..
I can get into download mode, and, flash via odin, and it says "success", and looks like it should work, but it doesn't...
Can anyone suggest something else to try, or, maybe the proper .tar file to try?
I think my phone is probably still on an ICS leak, and that might be the problem. but, obviously, I can't get it to boot, no matter what I flash through Odin..
Thanks so much to anyone who can help..I am hoping I don't have a brick,which I don't think I have, since I can get into download mode with no problems...
EDIT: Got it to work with a stoick tar from Dar8!!
Good job
thanks..
wase4711 said:
thanks..
Click to expand...
Click to collapse
cool beans...can ya put solved in the title sir...thx
bigjoe2675 said:
cool beans...can ya put solved in the title sir...thx
Click to expand...
Click to collapse
done...thanks for reminding me!
Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou
touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app
i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced
hankhandsome said:
Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou
Click to expand...
Click to collapse
unfortunately your touchscreen died and your only option is to bring it for warranty because of the bad flash, if you have warranty i suggest follow my simple guide here.
http://forum.xda-developers.com/showthread.php?t=2074756
---------- Post added at 01:52 PM ---------- Previous post was at 01:49 PM ----------
hankhandsome said:
i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced
Click to expand...
Click to collapse
still follow the guide so the insurance will not detect that you have been rooted before
chris151722 said:
still follow the guide so the insurance will not detect that you have been rooted before
Click to expand...
Click to collapse
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works
each rom i try in ODIN never boots - just goes into a bootloop.
i suppose if the insurers do inspect it, they may well not be able to get to see the flash counter if they can't boot it up - so it'll have a stock, unrooted rom on it anyway, so does anyone think i'll be ok ?
hankhandsome said:
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works
Click to expand...
Click to collapse
after you flash stock firmware go to recovery try to factory reset
---------- Post added at 02:15 PM ---------- Previous post was at 02:11 PM ----------
Ausboy 2011 said:
touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
its a bad flash from odin and bad flash thru phone the reason why touch is dying.
chris151722 said:
its a bad flash
Click to expand...
Click to collapse
every rom though ?
just tried another one and it's bootlooping ..
hankhandsome said:
every rom though ?
just tried another one and it's bootlooping ..
Click to expand...
Click to collapse
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash
chris151722 said:
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash
Click to expand...
Click to collapse
at the moment i can't access anything - it just sits at the samsung logo now. CWM is now no longer accessible either - i pop the battery, wait a few minutes then put it back in. I hold down Up/Power/Middle button and the Samsung Logo flashes, but nothing happens.
I can still put it in to download mode and flash roms with odin, but nothing happens .. i think i'm going to have to accept it's dead
My last roll of the dice is to grab one of the earlier roms from this thread
http://forum.xda-developers.com/showthread.php?t=1835931
and see what that does in ODIN
FYI:
1. you don't have to wipe anything before restoring a backup, it doesn't make a difference.
2. insurance fraud is a felony
Glebun said:
FYI: 2. insurance fraud is a felony
Click to expand...
Click to collapse
Good job i don't live in the US then ..
I'm pretty sure it's illegal no matter where you live
Well I don't particularly want to get into an argument here, as i'd much prefer a phone that works so i'll just thank you for your input.
i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,
chris151722 said:
i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,
Click to expand...
Click to collapse
thanks. it doesn't actually bootloop now, it just sits on the glowing samsung logo and doesn't move.
i just want to get a stock rom back on it and i'm going to just let it go. i'm a bit concerned that on the download screen it says "Custom Binary Download: Yes (19 Counts)". I know I did reset the flash counter not too long ago before I flashed the Darky Rom, so if this is indeed the flash counter, then i've obviously not done something right, so it'll show multiple flashes ..
ok, we've had developments ..
i actually got it in to CWM (don't know how..) and did a factory reset. it then did boot up into the OS but - no touchscreen still.
however, i've just tried connecting it to KIES and it's detected it so i'm going to try the emergency recovery thing ..
he says, as he selects the option and KIES then goes back to "connecting" .. *GROAN* .. and then comes back to tell me it's not supported to upgrade firmware via KIES .. *BIGGER GROAN*
Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..
hankhandsome said:
Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..
Click to expand...
Click to collapse
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje
JJEgan said:
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje
Click to expand...
Click to collapse
i'm aware of that - that's why I've ordered the OTG dongle so I can use my desktop mouse to go in and install triangle away
I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
rotweb 1-2
Simmyen said:
I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
Click to expand...
Click to collapse
Hey the exact same thing happened to me yesterday, and I was also installing JellyBam. I followed the exact same steps as you and my phone also went black during installation and is now hard bricked and needs to be JTAG repaired in order to work.
Looks like you guys have encountered phonus brickedus
This happened to me too, yesterday. There are lots of threads that discuss these things. If you cant access anything you can try a jig. (look it up)
I, however, tried jig and JTAG but no solutions found so i sent it to service center. Now i just pray to god that they don't find out that my phone's rooted (which makes my warranty vioded).
As far as my expertise says, if you cant find a Jig or JTAG solution, send it to service. When my phone arrives (if it does) i can tell you if they knew that i had rooted or not.
Regards.
PS. Did you follow it's flashing steps carefully?
WardenBerret said:
Looks like you guys have encountered phonus brickedus
This happened to me too, yesterday. There are lots of threads that discuss these things. If you cant access anything you can try a jig. (look it up)
I, however, tried jig and JTAG but no solutions found so i sent it to service center. Now i just pray to god that they don't find out that my phone's rooted (which makes my warranty vioded).
As far as my expertise says, if you cant find a Jig or JTAG solution, send it to service. When my phone arrives (if it does) i can tell you if they knew that i had rooted or not.
Regards.
PS. Did you follow it's flashing steps carefully?
Click to expand...
Click to collapse
If Jtag couldn't bring it back to life, they won't know, don't worry
WardenBerret said:
PS. Did you follow it's flashing steps carefully?
Click to expand...
Click to collapse
Yes. I followed them very carefully. Did everything that i was supposed to do..
Could it be a bug in the kernel?
Simmyen said:
Yes. I followed them very carefully. Did everything that i was supposed to do..
Could it be a bug in the kernel?
Click to expand...
Click to collapse
What ROM were you on? 4.0.4?
gastonw said:
What ROM were you on? 4.0.4?
Click to expand...
Click to collapse
Yep... the official 4.0.4
gastonw said:
What ROM were you on? 4.0.4?
Click to expand...
Click to collapse
What diff does that make? He was on custom kernel not stock.
Did you guys have at least 55% battery? On some occasions flashing roms can use allot of processing power and drain unusual amounts of battery. For example sometimes I have been on full battery, flashed a rom and its used 40% so if you guys was on low battery it could have died and screwed up your rom, kernel or worse your bootloader resulting in brick.
Sure that custom kernel was safe atheist?
Sounds like emmc to me.....
Sent from my GT-I9100 using xda app-developers app
rsr1 said:
Hey the exact same thing happened to me yesterday, and I was also installing JellyBam. I followed the exact same steps as you and my phone also went black during installation and is now hard bricked and needs to be JTAG repaired in order to work.
Click to expand...
Click to collapse
Exactly the same with me i9100. how can we make it?
Simmyen said:
I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
Click to expand...
Click to collapse
I also don't think it was the bug as the phone died while flashing the rom, not during the wipe. Perhaps it was a bad download or a link that took users to a rom for the wrong model of phone. Hopefully every user effected will get there phone repaired.
Sent from my GT-I9100 using xda premium
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick
I bought her an unlocked i9205 back in December. It was rooted already. I put SU and TWRP on it and did a backup of it. Well she kinda trashed it so I did a TWRP restore which ended with an error. Now it just boots to the Samsung logo. Do I need to load a new ROM now? I'm hoping I can find something to just put on an SD card and flash with TWRP. Any help is good. I have a PC setup with drivers for it. PDANET, ADB, etc.. No Odin though.
- Joe
JoeLansing said:
I bought her an unlocked i9205 back in December. It was rooted already. I put SU and TWRP on it and did a backup of it. Well she kinda trashed it so I did a TWRP restore which ended with an error. Now it just boots to the Samsung logo. Do I need to load a new ROM now? I'm hoping I can find something to just put on an SD card and flash with TWRP. Any help is good. I have a PC setup with drivers for it. PDANET, ADB, etc.. No Odin though.
- Joe
Click to expand...
Click to collapse
if you can get into recovery. try installing a new ROM
bnb25 said:
if you can get into recovery. try installing a new ROM
Click to expand...
Click to collapse
I can get into TWRP recovery. Will any ROM work with that? Can you recommend any ROMs? The stock one was fine but it was so full of Samsung bloat it really didn't have much available RAM left of it's 1.5GB after boot. I guess I don't care as long as it's stable and works so I can get out of the doghouse...LOL
- Joe
JoeLansing said:
I can get into TWRP recovery. Will any ROM work with that? Cahttp://forum.xda-developers.com/showthread.php?t=2608110 you recommend any ROMs? The stock one was fine but it was so full of Samsung bloat it really didn't have much available RAM left of it's 1.5GB after boot. I guess I don't care as long as it's stable and works so I can get out of the doghouse...LOL
- Joe
Click to expand...
Click to collapse
Try megafire mj2 v3x her3 in xda, it is stock with all the bloatware removed. Its is completely lag free.
JoeLansing said:
I can get into TWRP recovery. Will any ROM work with that? Can you recommend any ROMs? The stock one was fine but it was so full of Samsung bloat it really didn't have much available RAM left of it's 1.5GB after boot. I guess I don't care as long as it's stable and works so I can get out of the doghouse...LOL
- Joe
Click to expand...
Click to collapse
Grab Odin and flash stock ROM
*S.O.F.A*2SHAYNEZ*K.C.C.O*
Thanks guys. I'm trying a MegaFireMj2V3 just cuz I already downloaded it. Stock kinda sucked. I'd look and she'd have 3 apps running with low memory warnings. It was rooted and I'd uninstall a lot of bloat, but somehow it would auto update all the bloat right back within minutes. I'll go back to stock if needed but I want to try something de-crapped first.
- Joe
It's worse now.
Ok. Flashing MegaFireMj2V3 was a fail. It seems as if the system partition always fails. So I got Odin and a stock ROM. That failed also, and now I just have a couple of little red lines telling me to use Kies Recovery or something. And I can't get Kies to connect to it. My PC sees it. Samsung USB drivers install. Kies sees it plugged in but just lays there saying CONNECTING. I paid like $400 for this turkey for my wife for Christmas and now she's yelling at me that I blew it up.. I guess I can keep trying Kies but it's looking fail so far. This really stinks. I bought it on Amazon. It's supposed to have a 2 year warranty. It's Unlocked International Version with Warranty. But I don't know what country?
- Joe
JoeLansing said:
Thanks guys. I'm trying a MegaFireMj2V3 just cuz I already downloaded it. Stock kinda sucked. I'd look and she'd have 3 apps running with low memory warnings. It was rooted and I'd uninstall a lot of bloat, but somehow it would auto update all the bloat right back within minutes. I'll go back to stock if needed but I want to try something de-crapped first.
- Joe
Click to expand...
Click to collapse
JoeLansing said:
Ok. Flashing MegaFireMj2V3 was a fail. It seems as if the system partition always fails. So I got Odin and a stock ROM. That failed also, and now I just have a couple of little red lines telling me to use Kies Recovery or something. And I can't get Kies to connect to it. My PC sees it. Samsung USB drivers install. Kies sees it plugged in but just lays there saying CONNECTING. I paid like $400 for this turkey for my wife for Christmas and now she's yelling at me that I blew it up.. I guess I can keep trying Kies but it's looking fail so far. This really stinks. I bought it on Amazon. It's supposed to have a 2 year warranty. It's Unlocked International Version with Warranty. But I don't know what country?
- Joe
Click to expand...
Click to collapse
I you have the twpr try to change the recovery to the latest one.....try philz touch recovery
I think u have an old recovery
Sent from my GT-I9205 using xda app-developers app
shazzl said:
I you have the twpr try to change the recovery to the latest one.....try philz touch recovery
I think u have an old recovery
Sent from my GT-I9205 using xda app-developers app
Click to expand...
Click to collapse
I don't have any recovery anymore. It boots to a small failed update message. It's toast unless I can get Kies to work somehow.
- Joe
there is a way to use Kies to get Stock on there.. It involves typing in the words of your model or something like that./
maybe someone here can remember better than I.
On the Note, Ive seen it alot. there is a certian way that you have to type in the make and model and it will stock-ize you.
That is "IF" you can get it to connect to Kies..
I'll suggest you use a different USB cable..
Some will and some wont connect.....
good luck
Why don't you to flash a stock rom with Odin, I think you have dounload mode (as you don't have custom recovery it is the only way) ?
Search YOUR rom on sammobile, or the same level (not possible to doungrade you shall have more problem ! )
Lol this also happened to me but to recover, since you now only have download mode, connect it to Odin on your PC and find a brand new firmware. Try the latest versions because that's your best shot of recovering it. It doesn't matter what region you pick as long as that the model number is the same. Do note however that if you fail the flash KNOX will trip up and you will void the warranty. If it doesn't fail, it should boot up to the Samsung logo. If it still bootloops, go into recovery (since it should be there now), and wipe everything. Then your phone should boot up nicely.
Note: New firmware contains KNOX so rooting and installing custom recovery is now dangerous.
Sent from my GT-I9200 using Tapatalk