I Need a FTF for flashtool... i tried to install MIUI and it just sits at Sony Ericson...
All the firmware files on these threads are linked to Megaupload which was shut down,
Please help :crying:
I cant get to any recovery
you can find some firmware here: http://forum.xda-developers.com/showthread.php?t=1749426
Also why dont you just restore via PC companion or SEUS?
THeLogiC said:
you can find some firmware here: http://forum.xda-developers.com/showthread.php?t=1749426
Also why dont you just restore via PC companion or SEUS?
Click to expand...
Click to collapse
PC compainion says unable to repair phone. and i cant use it if i cant get into OS.
idk what SEUS is... but ill look it up... meanwhile, what else could i try?
collinjm01 said:
PC compainion says unable to repair phone. and i cant use it if i cant get into OS.
idk what SEUS is... but ill look it up... meanwhile, what else could i try?
Click to expand...
Click to collapse
SEUS is sony update service..search for it in google.
just download a firmware from the link I gave above.
Unzip the file to get ftf file.
flash it via flashtool. Should work
Here I have some 2.1 ROM http://www.4shared.com/file/i9zPqZ9J/sony_ericsson_x10i_21a0435_ora.html
Sent from my X10i using xda app-developers app
Good day
I experienced the same thing. My phone would automatically start into the Sony Ericsson white logo after inserting the battery in it. Just open PC Companion then go to support zone -> Update software. It can't pick up your phone then (Says no phone connected) then it gives u a dialog box where you can click 'Repair Phone'. Click and follow the steps
Related
am going mad with my st15i,it got dead i tried to boot in safe mode at that time my fw ver was .377,later i tried to update it using seus, updating was success but phone is still dead
later i tried using wotan server with .42 fw its givig some error at the end like data not recieved at the time of flashing main(my net speed is low will it affect downloading from wotan server)
at last i tried flash tool with .62 fw it says flashing but not ending
hey guys what may be the reason behind bricking and failure in flashing?
i dont know how to install adb driver(already installed usb driver and flash tool driver,in above cases my phone was detected so i there any roll for adb driver)
am noob to android,i even dont know whats boot loader
hope xperts can provide me helping my phone un brick
search wotanserver on google. there you can flash it online
metalrawk said:
search wotanserver on google. there you can flash it online
Click to expand...
Click to collapse
Wotan server is good if you have rock solid internet.. if your internet always behave inconsistently you need ti use flashtool.
Sent from my SK17i using xda premium
oh my internet speed sucks,i think I need flashtool tutorial,tnks 4 the reply
Flashtool is the right tool for your problem.
It's very easy to use. You can find it here:
http://forum.xda-developers.com/showthread.php?t=1351309
Regards
I will check that bro
try using the pc companion . connect ur phone to pc and start pc companion go to update section and click on Repair phone. That might do it.
haaah i tried seus and wotanclient, still phone is sleeping
guyz what may b the reason? am noob to android so i need help from xperts
also i need to know from where i can get xperia minis firmware files
Tried to use SEUS?
Should work aswell as wotan or flashtool if you only want to flash stock.
i didnt try flashtool as i dnt have xperia mini firmware,
still i dont knw wht happend to my phone
Here You go
Hi,
Here is the Generic ST15i (Mini) 4.0.2.A.0.62 Rom,which can be flashed using FlashTool
http://forum.xda-developers.com/showthread.php?t=1439293
thanks siddu let me try
Download Update Service Sony Ericsson program and run it...
99% problem solved !!
please help me
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)
I have a E10i handset. I used Cm7. suddenly the phone gone off when I made calls or connect to any mobile network. and it also go off when I take a picture with flash. torch worked finely.
Now I want to install Stock rom of SE; but i can't find them anywhere
I've tried to install CM9/CM10 but I stuck in bootloop
Please give me a link to download stock Rom for SE xperia X10mini
please help me I don't have any handset without this one
askrr said:
I have a E10i handset. I used Cm7. suddenly the phone gone off when I made calls or connect to any mobile network. and it also go off when I take a picture with flash. torch worked finely.
Now I want to install Stock rom of SE; but i can't find them anywhere
I've tried to install CM9/CM10 but I stuck in bootloop
Please give me a link to download stock Rom for SE xperia X10mini
please help me I don't have any handset without this one
Click to expand...
Click to collapse
Did you try e repair with SEUS or PC Companion?
SmG67 said:
Did you try e repair with SEUS or PC Companion?
Click to expand...
Click to collapse
how to do it?
askrr said:
how to do it?
Click to expand...
Click to collapse
Keep your phone DISconnected from your pc
Start PC Companion
Choose Support Zone
Choose Update (It won't find any because your phone is not connected)
Choose the Repair link
Follow the instructions from there on...
SmG67 said:
Keep your phone DISconnected from your pc
Start PC Companion
Choose Support Zone
Choose Update (It won't find any because your phone is not connected)
Choose the Repair link
Follow the instructions from there on...
Click to expand...
Click to collapse
thanks. I'm gonna try this..
Where do I find stock rom? I have one but its broken. I have pc with 1 gb ram. I can't use pc companion. I can use flashtool.
askrr said:
Where do I find stock rom? I have one but its broken. I have pc with 1 gb ram. I can't use pc companion. I can use flashtool.
Click to expand...
Click to collapse
http://xperiadev.wordpress.com/flashing/xperia-ftf-firmwares/
Okay, I installed CM9 ShockGenMOD on my Xperia U and it worked flawlessly. Later I saw this thread in APPS section "http://forum.xda-developers.com/showthread.php?t=2340073" and installed it using CWM on my phone, my bad it said JB only
Now my phone isn't proceeding ahead ShockGen logo after the installation. Xperia U did not have removable SD card so I can't even add NEW rom from PC to start from scratch.
What do I do? How do I fix it? Please help!!!
Regards
KING STING3R said:
Okay, I installed CM9 ShockGenMOD on my Xperia U and it worked flawlessly. Later I saw this thread in APPS section "http://forum.xda-developers.com/showthread.php?t=2340073" and installed it using CWM on my phone, my bad it said JB only
Now my phone isn't proceeding ahead ShockGen logo after the installation. Xperia U did not have removable SD card so I can't even add NEW rom from PC to start from scratch.
What do I do? How do I fix it? Please help!!!
Regards
Click to expand...
Click to collapse
use Sony PC companion to repair it..and then install CM9
yeah88 said:
use Sony PC companion to repair it..and then install CM9
Click to expand...
Click to collapse
How am I suppose to connect my phone to PC companion, when I can't start my phone.
Please can you reply in detail?
Anyone??? PLEASE @AD9295 you might help!!
KING STING3R said:
Anyone??? PLEASE @AD9295 you might help!!
Click to expand...
Click to collapse
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
ChikeD said:
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
Click to expand...
Click to collapse
Thanks for replying Lemme try and get back to you!
ChikeD said:
Have you used PC Comapanion before?
If you have you can repair the phone without connecting the phone.
Click start under support zone, click start under phone tablet software update, click repair in the window that says can't find phone / tablet,, PCC wil start downloading files and will ask you to connect in flash mode.
The phone must be turned off before connectinmg in flash mode.
Click to expand...
Click to collapse
Okay I tried as you said! But no when I connect it to PC PCC says no software available for your phone! WHAT TO DO? anyother suggestions PLEASE HELP
KING STING3R said:
Okay I tried as you said! But no when I connect it to PC PCC says no software available for your phone! WHAT TO DO? anyother suggestions PLEASE HELP
Click to expand...
Click to collapse
That is after you choose repair?
You will need to downalod and install flashtool install the drivers that come with it and find and download the right formware for your phone.
Download stock ftf and use flashtool to flash ftf look on here for how to use flash tool . Will solve all your problems
Sent from my Xperia U using xda app-developers app
Thank you very much guys! Flash tool worked THANKS
sorry for my late reply.
I will suggest that you should always have a backup in case of incidents like these.. this is a development site.
Accidents happen while developing.
Flashtool is always the best way to recover your phone and always have nandroid backup when you install a new mod.
Because when you flash to stock you lose your data but restoring nandroid backup using custom kernel solves the problem!
Hope i helped.
Thanks everyone my prob is solved! I did flashed it
Sent from my Xperia U using Tapatalk 4
....
Lol
Repair it via pc companion, it will install the original software
Or
u can download sony update service
http://www.sonymobile.com/us/tools/update-service/
Just plug in the tablet and choose repair or update something like that.. U know what to do
......
termodox said:
i tried mate, but as i said it gives me message that it contains modified software and i cant repair it...
There is no REPAIR option in sony update service OR in pc companion.
Please help.
Click to expand...
Click to collapse
simply download the firmware and flash it using flashtool : "http://www.flashtool.net/download.php"
you can check at "Xperia Tablet Z Android Development" section for firmwares. dont forget to install the drivers of the tablet z
28668443 70
......
.....
termodox said:
also what do i do with the bootloader key that the guy provided?
where do i put it in?
Click to expand...
Click to collapse
After downloading the flashtool and after extracting it to a preferred location.. You'll find a folder inside it named "driver"., run it and checked the drivers for tablet z and flashtool... A firmware and a flashtool will do the job for you.. Plus a little bit of googling.. Hehehe
termodox said:
i tried mate, but as i said it gives me message that it contains modified software and i cant repair it...
There is no REPAIR option in sony update service OR in pc companion.
Please help.
Click to expand...
Click to collapse
Thats weird.. Cause its suppose to install the orig fw no matter what.. Forgot to say that REPAIR is not an option it is a highlighted word in one of the paragraphs in pccompanion..
Anyway try flashing it with flashtool its pretty easy..
.....