Hi Everybody. As the title say, I am facing issues with the touch screen when i install Any CM ROM(FXP-Official)/AOSP. At the first boot I Can not unlock my phone or skip the "Tutorial". After Reboot the phone, the problem is still there
*I Flashed the BB recommend for each ROM (.72)
*I Installed the Respective Kernel via Fastboot:
- fastboot flash boot boot.img
Then
- fastboot boot boot.img
*I did a Full Wipe (Cache, Data, Dalvik)
*Format - System
*I flashed ROM
* And....Nothing
Any Solution? Anyone?
Thanks
EDIT. Every SE based ROMs (MIUI etc.) work without that BUG
EDIT. 03/03/13 AROMA Installer also does not work (Only with Vol and Menu buttons)
Jonfensu said:
Hi Everybody. As the title say, I am facing issues with the touch screen when i install CM9 FXP113/115. At the first boot I Can not unlock my phone or skip the "Tutorial"
I Installed the Kernel via Fastboot with Flash and Boot commands
I did a Full Wipe (Cache, Data, Dalvik)
Any Solution? Anyone?
Thanks
Click to expand...
Click to collapse
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
taaviu said:
Flash right kernel inside rom.zip folder.
Sent from my MT15i using Tapatalk 2 Beta-6
Click to expand...
Click to collapse
I know, I did that when i was installing FXP113 or 115 (With respective kernels) i mean the problem is with FXP Kernel and ROM .... Is there any patch or something?
UPDATE: Please Someone Help me... I tried the ICS Official Leak from here ,http://forum.xda-developers.com/showthread.php?t=1594651 and following the Instructions, i STILL get the same issue...: The Touch Screen Does not Work (Hardware buttons works) Anyone?
PS. With AOSP,Mooded and other ICS ROMs with Nightelf,Pwn etc Kernels i don't have that issue
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
sorry for my bad English
Sent from my MT15i using XDA
ash6088 said:
I have the same problem with Cm7, CM9 and MIUI and its kernel in the zip file, but I can not find solutions. My touch screen works only with stock rom or with official Ics kernel beta and Ics rom official and hybrid rom. Solutions?
Sent from my MT15i using XDA
Click to expand...
Click to collapse
Sure you did flash custom kernel with "fastboot flash boot boot.img"?
Sent from my MT15i using Tapatalk 2 Beta-6
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
ash6088 said:
HiTaaviu,I flashed the costum kernels included in the zip file CM9, CM7, and I also tried Pwn and NightElf kernel, but the touch screen does not work with MIUI cm7 and CM9, touchscreen only works with the stock rom and MooDeD ICS ROM, JJ's HYBRID ROM, AOSP 4.0.3 ICS, ICS SE Beta official with the official kernel ics of sony.
then the problem is not flash the kernel, because ics official kernel works perfectly and then flash the kernel run correctly. But why with the other kernel touch screen wrong?
I do not know how to do it, I can not find any solution!
Click to expand...
Click to collapse
Pleas write here steps "how do you install MIUI or cm7-9 rom"
Thanx
Etc..
1.downloaded rom xxx.zip
2. kernel xxx.img
3. wipe?
How installed kernel/rom.
Ok, this is the procedure I follow:
1 -Flash .42 with Flashtool
2-Root
3-Unlock bootloader with fastboot (fastboot.exe-i 0x0fce oem unlock 0xMykey)
4-Install cwm recovery
5-Iput zip file downloaded to sd (ex. update-cm-7.1.0-XperiaNeo-MT15i-signed)
4-I put the kernel included in the zip into the fastboot folder and flash (fastboot flash boot boot.img)
6-I go into recovery and wipe data / factory reset, wipe cache and wipe Dalvik cache
7-Flash zip rom and GAPPS
8-Reboot
9-Phonework but touch screen does not work
I tried with pwn kernel and other but it is the same thing!
The situation that presents itself is equal to this video:
Boot ZTE Blade / Oranage San Francisco (B10) with custom rom with working touch screen(Search in youtube)
I also tried to use the technique in the video but without battery Xperia neo will not turn on.
I do not understand where I'm wrong!
First of all flash .62 ftf by flashtool...then flash the respective custom kernel for the rom...wipe everything and also format everything in cwm ...all custom kernels are pre rooted and cwm recovery ready...now flash the rom and see if it works.
Sent from my MT11i using XDA
Cm7 cm9 n miui need .64 baseband not .42 so flash the
Baseband of .64 or rather fresh install .62 firmware
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Then some experienced dev is needed here...they can give some advice.
Sent from my MT11i using XDA
Some developer, PLEASE.... HELP US!!
ash6088 said:
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
Click to expand...
Click to collapse
Is zdunex miui ics working?
It uses stock kernel.
Sent from my MT15i using Tapatalk 2
If I use the stock kernel the touchscreen works perfect, but only with the stock kernel
The problem is still here... I tried Every ROM based on CM9 (since FXP129 to CM9 RC2 Official) or AOSP (Polish Blood 4.04) and don't work... Others ROM based on SE (MIUI etc.) Work flawless... WE NEED SOME DEVS HERE, Please...
please, no one can solve this problem ???
Lemme try.
Flash the latest Stock firmware. Boot it up, and go thru the whole setup process. Stock FTF usually got no probs when it comes to hardware.
Run the phone in Stock for awhile (1-2mins), then shut it off. Go into fastboot mode (press and hold "Menu" button while plugging into PC) and flash the kernel from the LATEST version of the ROM you want to use (FXP146 for CM9.1/CM10, FXP110 or something for CM7.2, MIUI2/MIUI4/MIUI4.1). It is usually in the zip itself or the dev would have recommended a kernel. If you don't know how to flash the kernel, PM me.
Boot up phone into recovery, flash new ROM, flash gapps, reboot phone.
BOOM all should be ok
I was on DX7 and now DX8 released, I just wanted to see how beautiful the ROM was but now I want to revert back to the old DX7 unil DiKeJ releases a STOCK ROM because I need fully working camera.
I unlocked using Flashtool 0.6.8.0
now on
Android version : 2.3.7 / kernel version : 2.6.29-FXP
How should I relock and then get my old stock kernel and xRecovery back
karthikx10 said:
I was on DX7 and now DX8 released, I just wanted to see how beautiful the ROM was but now I want to revert back to the old DX7 unil DiKeJ releases a STOCK ROM because I need fully working camera.
I unlocked using Flashtool 0.6.8.0
now on
Android version : 2.3.7 / kernel version : 2.6.29-FXP
How should I relock and then get my old stock kernel and xRecovery back
Click to expand...
Click to collapse
why you want to relock? .... flash again kernel and rom DX7
karthikx10 said:
I was on DX7 and now DX8 released, I just wanted to see how beautiful the ROM was but now I want to revert back to the old DX7 unil DiKeJ releases a STOCK ROM because I need fully working camera.
I unlocked using Flashtool 0.6.8.0
now on
Android version : 2.3.7 / kernel version : 2.6.29-FXP
How should I relock and then get my old stock kernel and xRecovery back
Click to expand...
Click to collapse
why do you want to relock the boot loader ?
download the stock kernel (pre-rooted and with xrecovery integrated ) from here
copy the zip file of DX7 rom on the sd card
flash the kernel using flash tool
and then the rom and wifi modules from xrecovery
wipe cache partition and dalvik cache
reboot
done.
You can revert back to DX7 without relocking your bootloader.
THINGS YOU WILL NEED
1.FLASHTOOL
2.2.3.3 FTF
Just flash the firmware with flashtool,root it with zegrush method and install xrecovery,then install DX7 with xrecovery & you are done.
Hit the thanks button if i helped you.:angel:
HI
I have Galaxy s2 with android 2.3.5. I want flash OMNI 4.4 rom on it..but before that I want to flash latest CWM recovery on my S2. And also my S2 doesn't have root access So the problem is
Can I flash latest CWM recovery when my S2 have android 2.3.5. ? or should I update official ICS from OTA before flash ?
(I'm planning to use ODIN to flash CWM)
thanks
Click to expand...
Click to collapse
Step 1 - flash CF kernel which is appropriate to ur baseband with Odin
Step 2- Flash cutom rom what ever u want
Step 3 - Flash Gapps..
Thats all :good:
You can flash CWM and then the custom ROM now itself, without upgrading to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
immortalneo said:
You can flash CWM and then the custom ROM now itself, without upgraing to ICS. Just make sure you flash the correct rooted kernel for your baseband version. Don't directly flash any CWM or use ROM manager. Good luck!
Click to expand...
Click to collapse
My details
Baseband version - I9100BUKI1
Kernal Version - 2.6.35.7-I9100BUKJ3-CL647431 [email protected]#2
Build number - GINGERBREAD.BUKJ3
So can anyone give me correct CWM recovery to my S2 ? (I just want to flash kitkat rom.. )
And you can't search for this why exactly ? You've been here more than long enough to know how things work.
Flash Gustavo's kernel first and then follow instructions on the omni thread for flashing as a first time user.
Search around and you will find everything here itself.
I'd suggest flashing the latest stock rom via Odin, ms1 I believe. Then flash philz kernel. Then boot into recovery, (while your new rom cwm zips are on your SD card) format system, preload, data and cache. Then flash the omni rom zip, and the correct gapps, and any other mods you would like.
Sent from my GT-I9100 using Tapatalk 4
I am on erro rom 4.2.2 and i want to upgrade to 4.4.2 , either PAC or the LX series , and do i just go on and do the normal backup , wipe and flash routine , or is there anything else i need to do before upgrading?.. reason i ask is , my sd card is partitioned to use with link2sd , will this still work with 4.4.2?
galaxys3lover said:
I am on erro rom 4.2.2 and i want to upgrade to 4.4.2 , either PAC or the LX series , and do i just go on and do the normal backup , wipe and flash routine , or is there anything else i need to do before upgrading?.. reason i ask is , my sd card is partitioned to use with link2sd , will this still work with 4.4.2?
Click to expand...
Click to collapse
Hmmm...most important thing when you upgrading to v4.4.2 is
in recovery you must (mandatory)...
1. format system
2. format data
3. format cache
this can be found in mounts and storage option in recovery.....failing to do so will result in bootloop....
if you don't like 4.4.2 and wanna to go back then you need to flash 4.2.2 kernel and boot into recovery and again format the above partition before you restore your backup....
iPusak Gaoq™ said:
Hmmm...most important thing when you upgrading to v4.4.2 is
in recovery you must (mandatory)...
1. format system
2. format data
3. format cache
this can be found in mounts and storage option in recovery.....failing to do so will result in bootloop....
if you don't like 4.4.2 and wanna to go back then you need to flash 4.2.2 kernel and boot into recovery and again format the above partition before you restore your backup....
Click to expand...
Click to collapse
Thanks for the help man! i have one more doubt , i am on erro rom , and i have lupus v8 running on it and i am not able to access recovery in it , i read in the lupus forum that v8 has that problem and using v7 solves it , but can i use v7 with erro rom? just flash it with flashtool?
galaxys3lover said:
Thanks for the help man! i have one more doubt , i am on erro rom , and i have lupus v8 running on it and i am not able to access recovery in it , i read in the lupus forum that v8 has that problem and using v7 solves it , but can i use v7 with erro rom? just flash it with flashtool?
Click to expand...
Click to collapse
If you are planning to upgrade to kitkat then you can't use lupus kernel anymore...you need to use kernel inside the rom zip...hust extract the kernel and flash it using flashtool...then boot into recovery and do the above step...
iPusak Gaoq™ said:
If you are planning to upgrade to kitkat then you can't use lupus kernel anymore...you need to use kernel inside the rom zip...hust extract the kernel and flash it using flashtool...then boot into recovery and do the above step...
Click to expand...
Click to collapse
So i am on erro now , that is 4.2.2 , i flash the boot.img from the pac rom zip file , using flashtool and then backup my rom then flash the pac rom(4.4.2) from sd card? right??
galaxys3lover said:
So i am on erro now , that is 4.2.2 , i flash the boot.img from the pac rom zip file , using flashtool and then backup my rom then flash the pac rom(4.4.2) from sd card? right??
Click to expand...
Click to collapse
Right....don't forget to format those partitions before you flash pac rom 4.4.2
Hi,
I got still my Sony Sola here and want to install a newer android version for it.
My Sola has the version 2.3.7 installed, totaly stock not rooted not unlocked etc.
I want to install the newest SlimKat ([V1] [Slim Build 5.4]) on it, the thread says:
How to install :
Download the ROM
Extract boot.img and flash it
Copy the ROM to your SD Card
Boot into recovery
Wipe data, cache, dalvik cache, system (Wipe -> Advanced Wipe)
Go to Mount and uncheck system (IMPORTANT)
Install the ROM
Reboot
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/xperia-u/sola-development/rom-unofficial-slimkat-t2676303
So this is what i have to do only? I dont need another revovery (all stock) or unlocked bootloader etc?
Thank you guys for help. :good:
Moglie said:
Hi,
I got still my Sony Sola here and want to install a newer android version for it.
My Sola has the version 2.3.7 installed, totaly stock not rooted not unlocked etc.
I want to install the newest SlimKat ([V1] [Slim Build 5.4]) on it, the thread says:
Here: http://forum.xda-developers.com/xperia-u/sola-development/rom-unofficial-slimkat-t2676303
So this is what i have to do only? I dont need another revovery (all stock) or unlocked bootloader etc?
Thank you guys for help. :good:
Click to expand...
Click to collapse
Hello!
First of all you need to unlock bootloader of your phone.
1.Then, flash custom kernel (probably this one from the rom's zip)
2.Reboot to recovery, do all 3 wipes and flash the rom. (Follow the instructions provided in thread you linked)
I think you don't have to update your phone to ICS before flashing.
Cheers
Cwikla