Related
Hi all.
I need some help and advice.
Being new to phone tinkering i dont want to do it wrong first time round.
My SE X10i is currently running gingerbread 2.3.3 but its rooted.
I would like help putting my phone on something better as the internets slow and lags a lot.
Im happy to try anything to make this phone as it could be or should be.
I dont know what rom to use or kernel as this is my first time doing anything to any phone.
AS you can guess im asking as i dont want to brick my phone on the first attempt.
If this is in the wrong place i applogise now.
Thanks if you can help.
I hate being a noob at something.
I can give more info if needed.
Thx wraith36
The internet will be always laggy. Very smooth browser is opera mobile. However the stock ROM itself is very laggy. I would recommend you to install some custom ROM. If you already have rooted phone it will be very easy to change the ROM. Just install xrecovery via flashtool (when the phone is turned on) and download ROM you want. Every ROM thread will have an exact installation guide. P. S. If you want to change kernel you have to unlock bootloader.
I could send you some necessary files to do that and guide you through unlocking the bootloader and the ROM change.
Just choose the ROM you want to have
Use this tool forum.xda-developers.com/showthread.php?t=1415600
Thanks for the help jakuburban
I will have a look into the ROM's and see what's what.
Do you recommend any.
I used FlashTool_0.2.9.1-GBready_root_xRec to root my phone, is that right?
I did the loader part with this and the kernel part also with FlashTool.
Well I hope I have.
You can send me what you think might help.
Beggars cant be choosers as they say.
And I need all the help I can be given or find.
And thx for you help with this.
Try these Links for the Latest Flash Tools.
http://forum.xda-developers.com/showthread.php?t=920746
http://androxyde.github.com/Flashtool/
Root the Device Install Xrecovery and CWM from the tool
and then u can decide on what Roms to Update...
Oh, You've done already almost everything. Now You just have to install xRecovery and choose which kind of ROM would You like> MIUI or a stock based ROM.
MIUI is a little bit slower but it has more options like themes etc
Stock based ROM looks almost like the stock ROM but this is the fastest one
MIUI I am using: http://forum.xda-developers.com/showthread.php?t=1377633
Stock based ROM I used: http://forum.xda-developers.com/showthread.php?t=1399040
After You downloaded flashable ROM You have to enter the xRecovery and flash it.
INFO: When changing to MIUI erase the data
OK I got all the info you have posted.
How do I add xRecovery
Do I download that to and install it or is that in my phone already?
I'm a noob at this.
Sorry if im slow at this.
wraith36 said:
How do I add xRecovery
Click to expand...
Click to collapse
First method
Have Your phone turned on (USB debbuging also) and connect it to flashtool.
Then the "xRecovery" button should enable. Hit this button and You're done.
Click to expand...
Click to collapse
Second method
Download this file and using root explorer copy the files from bin/ > system/bin/ and from xbin/ > /system/xbin/ and reboot
Click to expand...
Click to collapse
To enter xRecovery keep pressing back button (press>release>press...) while the phone is booting ("sony sericsson" text, or while loading some other kernel)
OK jakuburban.
I downloaded what you said.
I've tryed to see if xRecovery will highlite itself but it never.
So now i need to try the other method.
OK jakuburban xRecovery installed now.
When I choose a ROM do I need to choose one that suite's we I am, IE in the UK?
Or can I choose any as long as it's in english?
Up to now things are going OK seeing I've not done this kind of thing before.
Thx for understanding.
wraith36 said:
Download this file and using root explorer copy the files from bin/ > system/bin/ and from xbin/ > /system/xbin/ and reboot
Is this a command I need to type in or a direction for me to follow?
copy the files from bin/ > system/bin/ and from xbin/ > /system/xbin/
Sorry were do I copy them to? Do they need to go in a specific place in my phone?
If I start to stress you any just say and we can leave it till tomorrow.
I'm OK with it and don't want to get your back up any.
Click to expand...
Click to collapse
No You don't have to use any commands. (but You can If You want to have it more difficult )
the file I've sent You contains folder named system.
in system are folders called bin and xbin.
Get into bin folder and copy the files (with root explorer) to Your /system/bin/*here the files
That's what I meant with bin/ > system/bin/
After that do the same with the xbin folder
Sorry I updated my last post to say I have xRecovery installed now.
My fault for the confusion
wraith36 said:
OK jakuburban xRecovery installed now.
When I choose a ROM do I need to choose one that suite's we I am, IE in the UK?
Or can I choose any as long as it's in english?
Up to now things are going OK seeing I've not done this kind of thing before.
Thx for understanding.
Click to expand...
Click to collapse
I've never looked for a language. Everything worked fine, so just choose ROM You want
So when I change ROM do I also change the KERNEL or is that not necessarie.
Sorry my spelling is awe-full and same go's for my spell checker lol
wraith36 said:
So when I change ROM do I also change the KERNEL or is that not necessarie.
Sorry my spelling is awe-full and same go's for my spell checker lol
Click to expand...
Click to collapse
Most of the ROM's should work with the stock kernel, but I would suggest You to stick to the KERNEL the developers are suggesting. For me the best ROM is Doomkernel, because it works with MIUI and a stock ROM and also has overclocking
So the link you gave at the start for MIUI will that have the KERNEL with it or separate?
Sorry to bug you with all this.
I apologise for it now.
wraith36 said:
So the link you gave at the start for MIUI will that have the KERNEL with it or separate?
Sorry to bug you with all this.
I apologise for it now.
Click to expand...
Click to collapse
Yes, that's a whole thread and all of the necessary files are there.
P.S. Don't apologize. I like to help
KK no more sorry's then hehe.
I hope there are instructions before i start.
Will xRecovery stop me from bricking my phone by any chance.
Thx for all your help.
wraith36 said:
Will xRecovery stop me from bricking my phone by any chance.
Click to expand...
Click to collapse
No, it won't. Most of the times if You will be able to boot into xRecovery, however if You delete to much it could just stuck. But then You can use SEUS, it worked always for me, or flashtool.
jakuburban which do I install first the kernel or the rom.
Do I use the flash tool I used at the start to root the phone.
Once I know that I guess I can start.
And good morning to you.
wraith36 said:
jakuburban which do I install first the kernel or the rom.
Do I use the flash tool I used at the start to root the phone.
Once I know that I guess I can start.
And good morning to you.
Click to expand...
Click to collapse
Good morning,
I would suggest You to install the ROM first and then the kernel, because if You do it in the other way You may not be able to enter xRecovery.
Yes You can use this flahtool, I use it too
hello my CWM says " CWM Manager needs SuperUser access to function it ! If you have SU installed make sure CWM Manager is not Blocked then reboot and try " i've tested all the possible things.. i rebooted, went to super user but CWM is already granted.. is there any solution?
CAN I ROOT MY PHONE AGAIN USING THE SAME CF ROOT METHOD?
doodoot_09 said:
hello my CWM says " CWM Manager needs SuperUser access to function it ! If you have SU installed make sure CWM Manager is not Blocked then reboot and try " i've tested all the possible things.. i rebooted, went to super user but CWM is already granted.. is there any solution?
CAN I ROOT MY PHONE AGAIN USING THE SAME CF ROOT METHOD?
Click to expand...
Click to collapse
It could be possible that the binary of SU is not updated. try downloading superSU in google store to see what happens.
If that will not work, yes you can root gain your phone using CF root kernel then try flashing another kernel like siyah, speedmod etc.
HIT THANKS IF THIS HELPS YOU IN ANYWAY!!!
once i had the same problem.. try the latest version of cf-root ..hope that solves ur problem...
nursespecialist said:
It could be possible that the binary of SU is not updated. try downloading superSU in google store to see what happens.
If that will not work, yes you can root gain your phone using CF root kernel then try flashing another kernel like siyah, speedmod etc.
HIT THANKS IF THIS HELPS YOU IN ANYWAY!!!
Click to expand...
Click to collapse
i hit thanks because you helped me.. 2nd we're FILIPINOS XD.. salamat pre
Same problem, different result
Hello guys
First of all, I'm sorry to bump an old thread. But I guess it would be better than making a new one
I got my SGS2 from my sister few days ago and I tried to root it. After I did everything instructed by all tutorials I've read, I still can't use CWM Manager. It said just like above posts.
What I did:
1. Root the phone (already tried with 2 different kernels, the LP7s)
2. Open the SuperUser app. The app didn't give any options when I first opened it (like some tutorials do), it only gave 'Okay' to click.
3. Open CWM Manager and you all know the rest
4. Tried to install SU Updater fixer, but the app told me that there are no problems detected.
Then, I found out that I also had a problem connecting to wifi after I root (stuck in obtaining IP address). I didn't have the problem when first I use the device from my sister.
Waiting for your kindly replies. Thank you in advance
looniaz said:
Hello guys
First of all, I'm sorry to bump an old thread. But I guess it would be better than making a new one
I got my SGS2 from my sister few days ago and I tried to root it. After I did everything instructed by all tutorials I've read, I still can't use CWM Manager. It said just like above posts.
What I did:
1. Root the phone (already tried with 2 different kernels, the LP7s)
2. Open the SuperUser app. The app didn't give any options when I first opened it (like some tutorials do), it only gave 'Okay' to click.
3. Open CWM Manager and you all know the rest
4. Tried to install SU Updater fixer, but the app told me that there are no problems detected.
Then, I found out that I also had a problem connecting to wifi after I root (stuck in obtaining IP address). I didn't have the problem when first I use the device from my sister.
Waiting for your kindly replies. Thank you in advance
Click to expand...
Click to collapse
bump...
Is my phone already being rooted? Why I can't open CWM manager app? How do I fix the wifi problem?
anyone?
Just to confirm, you have the i9100? Not the i9100G or US TMobile or AT&T SGS2?
Kaze105 said:
Just to confirm, you have the i9100? Not the i9100G or US TMobile or AT&T SGS2?
Click to expand...
Click to collapse
I have the i9100, already on official ICS when I got it. What should I do? I already tried to search the answer but nothing tells the specific way to solve the problem
looniaz said:
I have the i9100, already on official ICS when I got it. What should I do? I already tried to search the answer but nothing tells the specific way to solve the problem
Click to expand...
Click to collapse
try changing the kernel and see, u can try Siyah latest 3.3.2 and check
ps- please make a nandroid bkp of ur exsisting rom in, case u face any issues u can rewert back
Did you root using CF-root?
If not, install the stock firmware if you arent on it, and use odin to install CF-root.
Sun90 said:
try changing the kernel and see, u can try Siyah latest 3.3.2 and check
ps- please make a nandroid bkp of ur exsisting rom in, case u face any issues u can rewert back
Click to expand...
Click to collapse
Kaze105 said:
Did you root using CF-root?
If not, install the stock firmware if you arent on it, and use odin to install CF-root.
Click to expand...
Click to collapse
Wifi problem solved when I use Siyah kernel, but the CWM app still showing the same. Everything went well from CWM Recovery mode though. Thx for your replies
In Eclipse during debuging LogCat messages not comming
Error : Unable to open log device '/dev/log/main': No such file or directory
ROM : GTR v7.8.x
Kernel : [email protected]))
How to fix this issue please help guys.
matrixrak said:
In Eclipse during debuging LogCat messages not comming
Click to expand...
Click to collapse
Because you fail to RTFM?
http://forum.xda-developers.com/showthread.php?t=1529777
neko95 said:
▷TO ENABLE OR DISABLE LOGCAT
▷TYPE: "dslog" TO DISABLE
▷TYPE: "enlog" TO ENABLE
FYI, MUST REBOOT TO TAKE EFFECT
Click to expand...
Click to collapse
"enlog" does not working in GTR v7.8.x
I tried the "enlog" cmd
FYI, I rebooted device also still it does not working.
Flashed: GTR v7.8.x
Still same error, "Unable to open log device '/dev/log/main': No such file or directory"
Please I tried many times but it does not taking any effect, What i missing? BOSS.
Checking Logcat in Ginger Snaps v1.3 ROM
Flashed ROM: GSnaps v1.3
entered CMD: "enlog"
Replay: mv: can't rename '/system/etc/init.d/95logger': No such file or directory
Logcat Enabled!
It does not able to remove that startup script so, check this guys.
matrixrak said:
I tried the "enlog" cmd
FYI, I rebooted device also still it does not working.
Click to expand...
Click to collapse
Never used the ROM, never used the kernel either. Why don't you ask in the ROM thread after your have tried that with the stock kernel shipped with that ROM?
Finally got to work on GSnaps v1.3
Finally got it worked on GSnaps v1.3
Please fix cmd "enlog".
I manually moved that "95logger" script file and rebooted device.
also "enlog" cmd does not work in GTR v7.8.x keep that guide of GSnaps clean guys it is very dirty to understand.
Please fix this issue if any one finds, otherwise this great innovated ROM to O1 will lead to a hated one by our beloved developers present out there.
Finally, i can continue my development work.
Anyway keep the good work and thanks to lophrae dude, u realized me.
When ICS port of Gsnaps or GTR will come ? eager to flash that one also.
Cheer up.
matrixrak said:
Finally got it worked on GSnaps v1.3
Please fix cmd "enlog".
I manually moved that "95logger" script file and rebooted device.
also "enlog" cmd does not work in GTR v7.8.x keep that guide of GSnaps clean guys it is very dirty to understand.
Click to expand...
Click to collapse
Did you run the script as root?
P.S. ROM suggestions need to be posted in the ROM thread, not here.
Please understand anyone before under estimate
Hello BOSS, till now i flashed xperia x10, xperia mini pro and many others. Their rom is very good please GSnap document is very dirty even
a Expert could mislead.
By the way, I prepared from past one year before proceeding to flash my device O1.
Besides, I don't have much time in child's play to waste XDA developer time and mine.
I correctly tested that CMD ("enlog") in GTR v7.8.x it does not work. I think u read that GSnap rom correctly thousand times.
and only in GSnap "enlog" this cmd worked for me. No one mentioned to enter that command in GTR vX.
matrixrak said:
Besides, I don't have much time in child's play to waste XDA developer time and mine.
Click to expand...
Click to collapse
Ditto. Geez... Post on the ROM thread! http://forum.xda-developers.com/showthread.php?t=1529777
No ROM developer will read ROM suggestions in a badly titled thread in general section. I am NOT the developer of that ROM. Never used it in fact.
P.S. Did you run the command as root?
Missed to check as Root
Ok, thank u.
I missed that to check as Root, no error message came and enlog worked.
Your help greatly appreciated.
i 've got an amaze 4g t-mobile recently.it works perfectly.but then,i updated to ICS through OTA...
Everything work fine except Wifi,i cant turn on wifi at all.It only show error when i try to turning on ...
I did search the whole forums,trying everthing i can do..unlock boot loader/rooted/s-off/flash 4EXT recovery/flash many cook rom (android revolution,fastrom,energy rom..),kernel(ruby-faux123 v007/v008/v015/v016..)
finally i reverted back to Stock GB with "PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed".
but wifi still shows ''error'' at all,when i try to turning on hotspot ,the phone force to reset .
currently:
Stock GB:2.3.4
Sense:3.0
Kernel:2.3.35.13 build 144#1
Baseband:1.08.550L.19DC_30.66.550L.08D
Buildnumber:1.43.531.3
Bootloader unlocked and s-off.
Hoping there is anyone else can understand my bad english and help me .
Since you're s-off try updating back to ics via the most recent file in the stock ruu thread and see if it resolves it.
sent from a smooth place where my fingers trace across the screen to see your face and make you scream!
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
ronaldinho_07 said:
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
Click to expand...
Click to collapse
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Dark Nightmare said:
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Click to expand...
Click to collapse
as you have said,i just flashed the above kernel (Amaze-EKF-009b-sense.zip) into stock GB,but wifi error is still there
after that,i updated to ICS via RUU and flashed this kernel from here : http://forum.xda-developers.com/showthread.php?t=1362759 (at #5)
Nothing changes.
at the first time,i have flashed the Amaze ICS(v015) kernel via 4EXT touch recovery,flashed kernel successfully .
(http://forum.xda-developers.com/showthread.php?t=1359951)
but i think i go wrong somewhere,because the following instruction said:
CWM Flash Instructions: (NO LONGER SUPPORTING CWM METHOD DUE TO HTC's STUPID S-ON UNLOCK!!!)
1. Copy file to SDcard
2. Reboot to CWM recovery
3. Flash the Zip file (if you noticed an error, Flash the same file the 2nd time)
4. Reboot, Done!
i read carefully the second way
Easy Kernel Flasher Instructions:
1. download the above file (via phone directly or to a PC)
2. unzip to a folder then depends on PC or Linux
[ Windows ] open command prompt window and type Flash.bat
[ Linux ] open terminal window and type ./Flash.sh (make sure permission is set to 755 for the Flash.sh)
3. Let the script complete!
,downloaded the kernel,extracted into a folder on my pc.
but i dont see any "Flash.bat'' and dont know how to flash it.
but in the folder that i've just extracted.i found two file:
wl12xx.ko and wl12xx_sdio.ko
putting the whole folder modules into the this kernel (http://forum.xda-developers.com/showthread.php?t=1362759) and run flash.bat...
after flashing,both wifi and bluetooth broken
when i try to turning them on,they turn off instantly
//sorry sir for the bad english
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Keylogger_0 said:
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Click to expand...
Click to collapse
thanks sir,i'll try
btw,i try to flashing faux123-kernel via CWM recovery,but i's aborted
then,i force to flash faux123-kernel via 4EXT touch recovery and succeed
but i still cant turn on wifi,it just says error
can anyone give me an advise,pls
That memory block is probably damaged.
sent from a galaxy you'll never see.
do you think it's related to wifi hardware issues
ronaldinho_07 said:
do you think it's related to wifi hardware issues
Click to expand...
Click to collapse
It could be that as well, did you call tmo and tell em about it?
Dark Nightmare said:
It could be that as well, did you call tmo and tell em about it?
Click to expand...
Click to collapse
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
ronaldinho_07 said:
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
Click to expand...
Click to collapse
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
ronaldinho_07 said:
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
Click to expand...
Click to collapse
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
thanks so much
nice day sir,and i have to go to bed ,it's 3h40 AM in vietnam
//updated.
after flashing many times,problem solved
Necro'd.
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
Click to expand...
Click to collapse
Anyone have any info as to how or where to repair the wifi chip on the amaze? I'm having the same problem and am quite certain that is it hardware issue as the problem started after dropping the phone and without flashing or changing anything, fixing permissions and flashing stock RUU's, kernels, etc of no help. Hoping that something is possible, would be great if it was as simple as a loose ribbon cable...
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
spencerjang said:
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
Click to expand...
Click to collapse
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
ravike14 said:
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
spencerjang said:
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
Click to expand...
Click to collapse
Why it failed? The error?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
PSM is now out and works on our devices all you need to do is install the Certificate by XxXPachaXxX
Download http://xxxpachaxxx.kleinrealms.com/?p=246
Download http://www.playstation.com/psm/store/en.html
Flash the Sony Package in TWRP or CWM, Only Install the Playstation Certificates
Reboot
Install APK
Login/Create Username
Rejoice!
If you go to arcade there is currently one FREE game
Note: As i said only install the playstation certificate, anymore can result in a bootloop or no boot
msfguard said:
Note: As i said only install the playstation certificate, anymore can result in a bootloop or no boot
Click to expand...
Click to collapse
Hello mate and thanks for posting the info.
When you say 'only install the playstation certificate', are you saying there's an option to pick what to install after you select the downloaded ZIP in TWRP / CW?
I really want to try this but I fear bricking my device if there's some other manual step required, such as modifying the ZIP prior to flashing from recovery.
Any additional information from you, or anyone who has applied this, would be greatly appreciated!
mroshaw said:
Hello mate and thanks for posting the info.
When you say 'only install the playstation certificate', are you saying there's an option to pick what to install after you select the downloaded ZIP in TWRP / CW?
I really want to try this but I fear bricking my device if there's some other manual step required, such as modifying the ZIP prior to flashing from recovery.
Any additional information from you, or anyone who has applied this, would be greatly appreciated!
Click to expand...
Click to collapse
Yes, The first screen ask you if you would like to install Bravia, Say No,Second is for playstation say yes!, third is xloud say no, then say stay in recovery dont let it reboot for u, reboot it after it closes aroma
Ill try to find time today to pull that certificate out, but its the only VERSION of the certificate ive gotten to actually work without constant forcecloses
Is it working on jb?
envoyé de puis mon Nexus s, aiiiiight ! (Michel rules the world)
ptr347 said:
Is it working on jb?
envoyé de puis mon Nexus s, aiiiiight ! (Michel rules the world)
Click to expand...
Click to collapse
Have only tried it on JB
Confirming it works !
THANKS !
Does it just work with root?
daxter19 said:
Does it just work with root?
Click to expand...
Click to collapse
i would assume so being that you must FLASH the permision thing
UltimateEnd said:
i would assume so being that you must FLASH the permision thing
Click to expand...
Click to collapse
I tried copying the two files from the zip to system/etc/permissions and system/frsmework and setting permissions on both to rwrr and i get the error code when starting the app. I'm not unlocked just rooted. I read on the other post about this that is all that needed to happen but no luck. It's there a way to tell from the zip what else i may need to do? I'm on JB as well.
Thanks
Brandon
bmathis said:
I tried copying the two files from the zip to system/etc/permissions and system/frsmework and setting permissions on both to rwrr and i get the error code when starting the app. I'm not unlocked just rooted. I read on the other post about this that is all that needed to happen but no luck. It's there a way to tell from the zip what else i may need to do? I'm on JB as well.
Thanks
Brandon
Click to expand...
Click to collapse
sorry i did not mean permission , (CERTIFICATE)
first download the the first file- , you should be able to download it straight from your phone, you said you are rooted ? make sure you have access to RECOVERY MODE - after your download, go in there, find the CERTIFICATE and FLASH IT . . . follow the steps given on here.
i did it twice to make sure it wasnt luck , and it worked great.
UltimateEnd said:
sorry i did not mean permission , (CERTIFICATE)
first download the the first file- , you should be able to download it straight from your phone, you said you are rooted ? make sure you have access to RECOVERY MODE - after your download, go in there, find the CERTIFICATE and FLASH IT . . . follow the steps given on here.
i did it twice to make sure it wasnt luck , and it worked great.
Click to expand...
Click to collapse
I tried one more time instead of flashing but doing it manually and the key was to completely power off instead of just rebooting. I don't know why but after that the PSM app quit erroring and works now. So it is possible to do it manually without flashing.
Side note, I tried to get into recovery and it gave me a dead android icon. I started with Power + Vol Down, chose the RCK icon and then it died. So I don't know what is up there. First time I had ever tried to get into recovery mode.
Thanks,
Brandon
Installation works as described!
But when I try to log in with my PSN credentials, I get a 'Deze service is niet beschikbaar in uw land/regio'. (This service is unavailable)
I live in Belgium. Will this be available in the future?
Or what can I do about this?
Thanks in advance.
Sent from my Transformer Prime TF201 using xda premium
Eskern said:
Installation works as described!
But when I try to log in with my PSN credentials, I get a 'Deze service is niet beschikbaar in uw land/regio'. (This service is unavailable)
I live in Belgium. Will this be available in the future?
Or what can I do about this?
Thanks in advance.
Sent from my Transformer Prime TF201 using xda premium
Click to expand...
Click to collapse
could be restriction on country atm
bmathis said:
I tried one more time instead of flashing but doing it manually and the key was to completely power off instead of just rebooting. I don't know why but after that the PSM app quit erroring and works now. So it is possible to do it manually without flashing.
Side note, I tried to get into recovery and it gave me a dead android icon. I started with Power + Vol Down, chose the RCK icon and then it died. So I don't know what is up there. First time I had ever tried to get into recovery mode.
Thanks,
Brandon
Click to expand...
Click to collapse
that means you probably just updated to JB, you need to flash a recovery
No luck for me.
Running JB rooted only, NOT unlocked.
Installed apk.
Copied .jar file and .xml to correct directories and changed permissions on the .jar to 644.
Shutdown and restart.
Error 8008103E when trying to open.
Any ideas where I went wrong?
Never mind, you have to change permissions on the .xml file to 644 also. The AndroidPolice instructions leave that part out.