Hi,
I have a new AT&T atrix 4g.
I unlocked the bootloader and found out that i have the famous wifi error problem.
I want to return the phone to the seller but would like to remove the unlocked text from the startup.
I read in the forum about hard brick during flashing 4.5.141 sbf. So im afraid of doing so.
I have no experience in flashing/rooting/etc... the only thing i did was unlock the bootloader with the automatic script. I still have the original at&t os.
Here is all my phone details:
4.5.141.BM860.ATT.en.US
android 2.3.6
kernel 2.6.32.9
build
4.5.141
I'd be happy if someone could help me out here...
I have also atrix 4g ...I have also unlocked the bootloader for rooting the mobile ...
I did this to my own Motorola Atrix 4g running rom: HB 2.3.4 oc 1.3ghz ext4 with the newest cwm installed
***i take no responsibility if this messes up your phone. I just did it to mine tonight before the replacement arives and wanted to help anyone else worried about being charged $399 for unlocking our bootloader
1) you need to download
//www35.megaupload.com/files/70b7d352e9514672c426f9dda58d3f6e/AUTOMATIC_UNLOCK_V4.2.zip
just incase something goes wrong you can unbrick it
2) RSD lite 5.3.1
//crackflashers.com/b16/Atrix/RSDLite5.3.1.msi
3) Newest moto update 2.3.4
//gitbrew.org/~dasmoover/android/atrix/1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
boot into rsd mode and flash the official update using rsd lite, it will stop at 100% but never finish. once you see the at&t logo you can unplug if it takes forever and just wait for it to load.
after you will no longer have cwm or the "unlocked" text at boot, but all your data will still be on the phone so dont forget to wipe after.
***link #1 is only if you have problems booting after using rsd lite (i didnt need it)
Hi,
What you are writing is correct for 2.3.4. I have the a 2.3.6 and 4.5.141.
I know this worked for 4.5.91 But im afraid that on my version it won't work...
Anyone?
Related
My Atrix is running 1.57, is rooted with Gingerbreak, deodexed with Adeo, and has sideloading enabled with Gladenable. The back camera has stopped working, so I'm planning on sending it in to Motorola under warranty. I'd just like to know everything I need to do so that it will pass as a stock phone when inspected.
I plan on flashing the retail 1.26 with RSD Lite. Is there anything else I should do? Is there anything that may tip them off and void my warranty?
RSD to 1.2.6 and flash both updates OTA
Don't even need to update. Just flash 4.1.26.
Hello Atrix users! I recently just received this phone about a week ago and have rooted, unlocked the bootloader and also flashed the cwm. Now, whenever I try to update via OTA or sd card I get an error stating that the update has failed. I'm very new to Android phones and I was wondering what the procedure for updating would be? BTW I'm on 1.8.3
Thanks a lot
first of all i dont think your suppose to rsd or ota after you have unlocked the BL you have to flash GB through moto-fastboot or fastboot when u have GB on your external SD and run the commands through a command window, GOOGLE IS YOUR FRIEND and so is XDA just a do a search and you should find wat your looking for,
wat i have done is i was already on 1.8.3 and unlocked the BL, but i forgot to root the phone, and i couldnt root idk why, so i had to use the aroot method(do quick search on it) which had me rsd back to 1.2.6 then reboot, after that the words UNLOCKED where gone, so i think rsd back to 1.2.6 either took the unlock away or just got rid of the words and BL was still unlocked idk, but any way did a wi-fi ota update to 1.5.7 than ran afterupdate.bat and it retained the root, then just ran the unlock again with rsd rebooted and the words unlocked were back, but im not on 1.8.3, idk if i should try to ota to it, or rsd back to the beginning which is 1.2.6 and just ota all the way to the offical newest update of gingerbread then unlock the bl again and do the preinstall root method, thats where im stuck at,
That seems like a ton of work just for the OTA. I unlocked my boot loader and flash the cherry blur rom (v.1.4) this was the easiest way I have found to get 2.3.3 on my phone and without blur over taking the interface.
Sent from my MB860 using XDA Premium App
from wat i have read you should be good with wat ever u do with rsd or flashing back to a stock rom AS LONG AS YOU HAVENT UPDATED TO THE NEWEST OTA UPDATE SENT TO YOU OTA BUT IF YOU HAVE ACCEPTED THE OTA UPDATE YOU WILL HARD BRICK YOUR PHONE IF U TRY FLASHING BACK TO A STOCK LIKE 1.2.6 i think that is how it goes from wat i have read
Ok here is the case.
I have couple of AT&T atrix here which belongs to friends. I am going to point down what is the current situation so someone out there help / warn me before I do something stupid.
1. I had unlocked the bootloader, rooted the phones and enabled sideloading on 1.8.3
2. OTA was flashed on these phones as soon as it was made available.
3. I received no warning or failed update. The update was successful and phone booted fine into gingerbread.
4. New bootloader was flashed hence I lost the Unlocked bootloader.
Now this is what I plan to do.
1 Use pudding to unlock the bootloader again.
2. I have seen people who get soft brick when they do this on OTA which is recoverable.
Now my question is, can i directly flash the new 2.3.4 SBF which is pudding + root + unlocked bootloader using RSD?
If yes, can I install latest CWM after I flash the new combined SBF using RSD. I know I can recover from soft brick by unlocking bootloader and flashing the SBF again as it goes back to fastboot after softbrick ( i recovered mine from soft brick couple of days back ). Just wanted some clarification regarding this particular situation.
I am not exactly a noob, but there are conflicting responses when I tried to search this. Thanks in advance,
Also can someone tell me where to check the status of efuse on atrix (location, original value and modified value to expect in case of blown fuse). All phones are rooted. So wanted to check if I have blown any fuse or not.
So Guess who got an Atrix today? me! Guess who also probably bricked their atrix today? me!
So here is what happened:
1: I have an unlocked, rooted Atrix 4G from AT&T running 2.2 1.5.7 I believe.
2: I wanted to flash some roms, so I so I attempted to flash tenfar's CWM, but that didn't work, it said install succeeded but I could not get into CWM ( I tried everything, believe me, I'm no noob)
3: I then attempted to flash CWM from Rom Manager and so I did and I flashed the Atrix version, I then hit boot into recovery from within Rom Manager.
4: What I got next is a screen that says "failed to boot 2, starting RSD mode", now I cannot get passed that screen when it powers up.
5: Worst of all, using MSU (moto sw update), it says device is connected but not what kind, meaning I can't restore it, probably because I had adb mode turned on previosly.
update: after attempting to flash a new SBF, the phone told me it failed because the phone did not re-enumerate. Now I have the same problem, but with a new error message on the boot screen: Battery to low to flash!
I have searched everywhere, now I need to resort to you, xda community, Thanks So Much!!!
If you can get into RSD , check to see if fastboot is an option. If you can get into that I would advise to start over by erasing recovery. Command is fastboot erase recovery, then flash romracers recovery thru fastboot. Once you have recovery reboot into it and flash any ROM like Alien, Aura whatever you like.
Alien Atrix
See the thing is, fastboot is not an option , it immediately goes to RSD mode. I may have found a fix, and I am now flashing a new SFB with rsdlite
That's another option, noticed you were on 1.5.7 so I would advise 1.8.3 fruitcake sbf. Make sure you battery is fully charged, if your battery gives out during sbf flash you will hard brick your phone.
Alien Atrix
while I was flashing the sfb, the device failed to reenumerate and now it gives me a low battery warning, with no way to charge it, regardless, I have a friend who will let me borrow his battery tommorrow then Ill try to flash again, really I should use the 1.8.3? I just tried to flash the 1.2.6, so Your saying its ok to go forward with a SFB flash? I come from a world of Samsung's so these are all new to me besides the time I had a backflip for a week (ugh).
Are you sure your unlocked the bootloader? If you successfully unlocked you would have unlocked on top right corner of boot screen and have fastboot also.
Alien Atrix
I'm not sure if I have there is nothing that says "unlocked" at the top of the screen, and I could previously access the recovery and fastboot before this. I did not get this phone new, it came from the AT&T dev center or something like that. My dad works there.
You need to charge the battery. I stripped an old USB cable down and used the red with the positive side of the battery and black with the negative using tape to hold them in place then inserted the battery in the phone and plugged the USB in the computer. This allowed me to flash a ROM and unlock bootloader. Etc.
Warning this could harm you're phone. If you cross the wrong wires or touch more then just negative or positive areas of the phone and or battery. Although I didn't have any trouble with it you might.
If in doubt do it the right way buy a battery charger for your battery, use someone's battery or phone to charge yours.
Sent from my MB860 using Tapatalk
Ok Im at my computer, If you are unsure of unlocked bootloader I now recommend you RSD either 1.8.3 with unlocker & preinstall or the newest is 2.3.4 with unlocker & preinstall read this thread about 3 times first http://forum.xda-developers.com/showthread.php?t=1136261
Unlock using fastboot, after you get phone to boot for first time, ADB commands for preinstall root, after root use Root Explorer app then delete "install-recovery.sh" @ /system/etc.
Now you are ready to install the newest recovery by Romracer 3.2, Tenfars is outdated and no support from the developer. Read this thread 2 times http://forum.xda-developers.com/showthread.php?t=1204500 I recomend flashing this recovery thru fastboot per Romracer.
Now you are ready to flash your choice of ROM, follow proper procedure to flash new ROMs thru Recovery.
Also check out the unlocked sim codes thread in general, unlock sim.
If I helped click the thanks button
what Im confused on is what exactly i should flash if I am stuck in a kind of RSD mode bootloop/soft brick?
On your first post you said you were on 1.5.7 correct?
Atrix first released with 1.2.6 then updated to 1.5.7 then updated again to 1.8.3
Bootloader was unlocked with the 1.8.3 update
I updated to 1.2.6>1.5.7>1.8.3 then followed this tutorial http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader[/UR
ok thanks very much! Ill get back to you later once I get a fresh battery.
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
iCracked said:
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
Click to expand...
Click to collapse
yes, that's what you should have done in the first place. you can't do anything with "ROM" in its name without unlocking your bootloader which is why you're in this predicament. unlocked phone (maybe you mean SIM unlocked, free to use on any carrier) is not the same as an unlocked bootloader.
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
defnow said:
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
pukemon said:
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
Click to expand...
Click to collapse
haha thanks guys, yes I am SIM unlocked and everything just said unlocked so maybe I thought the reason they where specific to carrier locking was the radios? haha but I was wrong
Hello to all
I receive an atrix 4g locked to at&t usa. I unlocked with a code, after i unlock the BL.
I install cwm and romracer and flash CM7(2.3.6) rom from sd.
After i flash Darkside(2.3.5) rom. Now i want to return back to stock.
I have some small problems, the soft keys light is very dimm and the wifi signal is very low compared with my previous iphone 4.
The question is: is it safe to flash 4.5.91(2.3.4) stock sbf with rsd?
I know that the other option are fruitcakes but i just want to know if i can flash this vers with rsd.
System version: 4.5.133.mb860.att.en.us
Android version 2.3.5
Baseband: N_01.77.30P
I read many threads about but i'm still in the "fog". I know that the answer is somewere on the forum and sorry for opening another thread.
Thanks a lot for understanding.
While it's not recommended to use RSDlite after unlocking the bootloader, it will work as long as you only use the 4.5.91 GB2.3.4 SBF (signed). I have done it twice but at my own risk of course.
If you need to return to stock you can flash the fruitcakes, which are stock files. This method is definitely recommended over sbf.
M_Alin said:
Hello to all
I receive an atrix 4g locked to at&t usa. I unlocked with a code, after i unlock the BL.
I install cwm and romracer and flash CM7(2.3.6) rom from sd.
After i flash Darkside(2.3.5) rom. Now i want to return back to stock.
I have some small problems, the soft keys light is very dimm and the wifi signal is very low compared with my previous iphone 4.
The question is: is it safe to flash 4.5.91(2.3.4) stock sbf with rsd?
I know that the other option are fruitcakes but i just want to know if i can flash this vers with rsd.
System version: 4.5.133.mb860.att.en.us
Android version 2.3.5
Baseband: N_01.77.30P
I read many threads about but i'm still in the "fog". I know that the answer is somewere on the forum and sorry for opening another thread.
Thanks a lot for understanding.
Click to expand...
Click to collapse
live4nyy said:
While it's not recommended to use RSDlite after unlocking the bootloader, it will work as long as you only use the 4.5.91 GB2.3.4 SBF (signed). I have done it twice but at my own risk of course.
If you need to return to stock you can flash the fruitcakes, which are stock files. This method is definitely recommended over sbf.
Click to expand...
Click to collapse
Will flashing the SBF via RSD re-lock the bootloader? I need to take my phone in for a warranty swap (hardware issue) and don't want them to know I unlocked the phone.
It will hide the "unlocked" text during boot but it does not actually re-lock the bootloader. But when you think about it, even though they never intended for the end user to unlock the phone (hence the encrypted/locked bootloader), they still put the warning in if/when anyone unlocked the bootloader. It's there for a reason but I doubt they will find out.
ItsLunchBOX said:
Will flashing the SBF via RSD re-lock the bootloader? I need to take my phone in for a warranty swap (hardware issue) and don't want them to know I unlocked the phone.
Click to expand...
Click to collapse
live4nyy said:
It will hide the "unlocked" text during boot but it does not actually re-lock the bootloader. But when you think about it, even though they never intended for the end user to unlock the phone (hence the encrypted/locked bootloader), they still put the warning in if/when anyone unlocked the bootloader. It's there for a reason but I doubt they will find out.
Click to expand...
Click to collapse
So yeah I was impatient and tried to flash it without waiting for a reply. It kept failing and then all I would get on my phone was "Failed to boot 4 Starting RSD Protocol".
I ended up having to re-flash pudding, which was an adventure in itself (upgrading RSD, rebooting computer, trying different USB ports & cables before it would finally take). I think I will just take it in tomorrow even with it saying "Unlocked" and see if they will swap it out. I'm having touch screen issues with intermittent dead spots and ghost touches.
Did you try the stock SBF with the same combination of port and cable as you did when you successfully flashed pudding? I've heard those two factors can cause a bad flash in the past. I've read that a back port on the computer is recommended for sufficient power and using the actual OEM cable the phone came with is highly recommended as well.
Oh well, hope you get it swapped out, the people at the AT&T stores (if that's where you got it) usually don't pay no mind to that anyways.
ItsLunchBOX said:
So yeah I was impatient and tried to flash it without waiting for a reply. It kept failing and then all I would get on my phone was "Failed to boot 4 Starting RSD Protocol".
I ended up having to re-flash pudding, which was an adventure in itself (upgrading RSD, rebooting computer, trying different USB ports & cables before it would finally take). I think I will just take it in tomorrow even with it saying "Unlocked" and see if they will swap it out. I'm having touch screen issues with intermittent dead spots and ghost touches.
Click to expand...
Click to collapse
Hi,
I do have the same kind of query. I have AT&T Motorola Atrix 4G. I unlocked SIM, unlocked BL, rooted and installed CWM recovery, De-dexed and Webtop over HDMI hacked. I am still on AT&T Stock ROM 2.3.4 / Build # 4.5.91
I am facing random reboot problem while using 3G data service. I want to re-flash Stock 2.3.4 ROM. As per your reply in this thread I can only do this by flashing Fruitcakes as I have unlocked BL ... right? But in this link I am bit confused which file to download and flash amongst 2.3.4 / 2.3.5 att 4.5.133 / ATT 4.5.140 - 2.3.6? Also, after flashing a fruitcake can I still flash a custom ROM later on and at any point of time revert back to stock?
Thanks so much.
live4nyy said:
While it's not recommended to use RSDlite after unlocking the bootloader, it will work as long as you only use the 4.5.91 GB2.3.4 SBF (signed). I have done it twice but at my own risk of course.
If you need to return to stock you can flash the fruitcakes, which are stock files. This method is definitely recommended over sbf.
Click to expand...
Click to collapse
If you want to go back to stock, as in the last "Official" build released by Motorola, then you want the 2.3.4 build. And as long as you use the fruitcakes you can go back to a custom rom at any time.
sony108 said:
Hi,
I do have the same kind of query. I have AT&T Motorola Atrix 4G. I unlocked SIM, unlocked BL, rooted and installed CWM recovery, De-dexed and Webtop over HDMI hacked. I am still on AT&T Stock ROM 2.3.4 / Build # 4.5.91
I am facing random reboot problem while using 3G data service. I want to re-flash Stock 2.3.4 ROM. As per your reply in this thread I can only do this by flashing Fruitcakes as I have unlocked BL ... right? But in this link I am bit confused which file to download and flash amongst 2.3.4 / 2.3.5 att 4.5.133 / ATT 4.5.140 - 2.3.6? Also, after flashing a fruitcake can I still flash a custom ROM later on and at any point of time revert back to stock?
Thanks so much.
Click to expand...
Click to collapse
Thanks for your early reply ... Just one thing more I wanna ask that if I flash ATT 4.5.140 - 2.3.6 fruitcake, then can I flash ATT 2.3.4 - 4.5.91 over it? Is the brick warning for going back to stock ATT ROM only after having BL unlocked?
Thanks for your help
live4nyy said:
If you want to go back to stock, as in the last "Official" build released by Motorola, then you want the 2.3.4 build. And as long as you use the fruitcakes you can go back to a custom rom at any time.
Click to expand...
Click to collapse
Yes, you can flash 2.3.4 fruitcake over a 2.3.6 fruitcake. Just make sure to do the "wipes" (clear data/cache/factory reset/fastboot wipe/etc).
As far as I understand, the fruitcakes will not brick your device, as long as you follow the directions. The risk for bricking applies to using an SBF file and RSDlite.
sony108 said:
Thanks for your early reply ... Just one thing more I wanna ask that if I flash ATT 4.5.140 - 2.3.6 fruitcake, then can I flash ATT 2.3.4 - 4.5.91 over it? Is the brick warning for going back to stock ATT ROM only after having BL unlocked?
Thanks for your help
Click to expand...
Click to collapse