Hello Atrix users! I recently just received this phone about a week ago and have rooted, unlocked the bootloader and also flashed the cwm. Now, whenever I try to update via OTA or sd card I get an error stating that the update has failed. I'm very new to Android phones and I was wondering what the procedure for updating would be? BTW I'm on 1.8.3
Thanks a lot
first of all i dont think your suppose to rsd or ota after you have unlocked the BL you have to flash GB through moto-fastboot or fastboot when u have GB on your external SD and run the commands through a command window, GOOGLE IS YOUR FRIEND and so is XDA just a do a search and you should find wat your looking for,
wat i have done is i was already on 1.8.3 and unlocked the BL, but i forgot to root the phone, and i couldnt root idk why, so i had to use the aroot method(do quick search on it) which had me rsd back to 1.2.6 then reboot, after that the words UNLOCKED where gone, so i think rsd back to 1.2.6 either took the unlock away or just got rid of the words and BL was still unlocked idk, but any way did a wi-fi ota update to 1.5.7 than ran afterupdate.bat and it retained the root, then just ran the unlock again with rsd rebooted and the words unlocked were back, but im not on 1.8.3, idk if i should try to ota to it, or rsd back to the beginning which is 1.2.6 and just ota all the way to the offical newest update of gingerbread then unlock the bl again and do the preinstall root method, thats where im stuck at,
That seems like a ton of work just for the OTA. I unlocked my boot loader and flash the cherry blur rom (v.1.4) this was the easiest way I have found to get 2.3.3 on my phone and without blur over taking the interface.
Sent from my MB860 using XDA Premium App
from wat i have read you should be good with wat ever u do with rsd or flashing back to a stock rom AS LONG AS YOU HAVENT UPDATED TO THE NEWEST OTA UPDATE SENT TO YOU OTA BUT IF YOU HAVE ACCEPTED THE OTA UPDATE YOU WILL HARD BRICK YOUR PHONE IF U TRY FLASHING BACK TO A STOCK LIKE 1.2.6 i think that is how it goes from wat i have read
Related
Hi, I was wondering, I have Kenn's 4.5.91 4.5 Beta, I wanted to flash back to stock. Would I use RSD to flash 1.26 then 1.56, 1.86, then finally 1.91? I also wanted to know how to get rid of that "unlocked" lettering when the phone was booting up for warrenty.
Thanks
I rsd back to 1.2.6 it took the unlock words away but not sure if the bl was still unlocked, but I rooted then updated to 1.5.7 and it kept root and ran the unlock again and the words unlocked came back...hope that gives u any kind of help
Cool, Ya, I think the bootloader is still locked doesn't matter if it still is, just wanted the words to be gone. Thanks
Let me know how that works for you
Ok Iv noticed that things are getting really really confusing around here with people saying one thing then someone else saying something else. I want to have a thread that is straight forward coming from people that know what they are talking about and not just assuming.
Now my phone has never had an unlocked bootloader. Before I updated to GB OTA i was on .83 rooted with all the mods added to it (webtop dock, blah, blah blah) I RSD back to .26 (that very old file) and just started doing OTA updates one by one once i logged in with my blurr account. I updated to GB via the official OTA update that was pushed to my phone when i selected to system update under settings.
I was able to Root this ATT OFFICIAL version pushed to my phone using This Pre-install method and that is all that i have done.
What i want to do now is Unlock the bootloader. From what i have read Pudding is the best way of doing this.
Q1: Does this method (Pudding) work with the Official ATT OTA version pushed to phones and not Kenns modded version, and is it the only way to unlock the bootloader?
Q2: Once unlocked what version of CWR do I install to be able to flash ROMs? Would i be able to just install ROM Manager and do the installation from there, Or possibly both ROM Manager and CWR?
Q3: Since RSD is out of the picture for me, if for some reason I'm to soft brick my phone and can still get into Recovery mode, what .sbf do i flash, would it have to be the same one that was pushed to phones that if not already available on here will be really soon?
Thanks for all the help if anyone helps out.
StyleUkno
Q2, if you unlock your phone, cwM of tenfars, the 2nd version for unlocked. Rom manager with official CWM have released before some days, but yet it doesn't support external sd.
As for question 1, and the unlocking pudding. The OTA gb you installed, might updated you bootloader, and maybe can't use that pudding.
For that be very carefull of your next steps.. Personally I would have send a pm to the2dcour, or another dev that knows as much..
Sent from my MB860 using XDA App
Bump to see if any other responses come.
Q1: Does this method (Pudding) work with the Official ATT OTA version pushed to phones and not Kenns modded version, and is it the only way to unlock the bootloader?
Yes, pudding works and is the only way. Have to Flash pudding and run OEM unlock command in fastboot. Because you are already on OTA, there's a high chance you will need an extra couple steps. It will likely soft brick with 0x1000 error but wit fastboot option. From there you need to fastboot and re do the oem unlock command another time. Then you are fine.
Q2: Once unlocked what version of CWR do I install to be able to flash ROMs? Would i be able to just install ROM Manager and do the installation from there, Or possibly both ROM Manager and CWR?
Tenfar's 6/30 unlocked CWM. ROM Manager version doesn't properly wipe as of yet. You can update if you dont' care about wiping, but that usually leads to boot loops when installing roms. Also most devs here are using update scripts tailored for tenfars version
Q3: Since RSD is out of the picture for me, if for some reason I'm to soft brick my phone and can still get into Recovery mode, what .sbf do i flash, would it have to be the same one that was pushed to phones that if not already available on here will be really soon?
if you softbrick (other than the initial unlock soft brick where you just run oem unlock again) then depends on what you want to get to. CWM a rom.zip/fruitcake for the version you want would be ideal. If not then a fastboot version if available. I'd RSD the GB 4.5 with pudding sbf as a last resort.
StyleUkno said:
Ok Iv noticed that things are getting really really confusing around here with people saying one thing then someone else saying something else. I want to have a thread that is straight forward coming from people that know what they are talking about and not just assuming.
Now my phone has never had an unlocked bootloader. Before I updated to GB OTA i was on .83 rooted with all the mods added to it (webtop dock, blah, blah blah) I RSD back to .26 (that very old file) and just started doing OTA updates one by one once i logged in with my blurr account. I updated to GB via the official OTA update that was pushed to my phone when i selected to system update under settings.
I was able to Root this ATT OFFICIAL version pushed to my phone using This Pre-install method and that is all that i have done.
What i want to do now is Unlock the bootloader. From what i have read Pudding is the best way of doing this.
Q1: Does this method (Pudding) work with the Official ATT OTA version pushed to phones and not Kenns modded version, and is it the only way to unlock the bootloader?
If you use the pudding you will hard brick on the OTA (from what people have been saying)
Q2: Once unlocked what version of CWR do I install to be able to flash ROMs? Would i be able to just install ROM Manager and do the installation from there, Or possibly both ROM Manager and CWR?
Out of the picture becuase you cant unlock I think
Q3: Since RSD is out of the picture for me, if for some reason I'm to soft brick my phone and can still get into Recovery mode, what .sbf do i flash, would it have to be the same one that was pushed to phones that if not already available on here will be really soon?
Thanks for all the help if anyone helps out.
StyleUkno
Click to expand...
Click to collapse
asldkjghaa
can i flash back to stock 4.5.91 to to unroot the phone. do i just put the .zip on my sd card and flash using clockworkmod
also curious
Same question.
I was previously on GB that was pushed to me OTA. I got bored and rooted, unlocked, and flashed Ken's Alien not thinking about the consequences of not being able to revert to stock thanks to previous root methods like Gingerblur and SBF that made it so easy. I want to get my work email back on my phone, but cannot if I am rooted.
Will flashing a 1.8.3 Fruitcake and then OTA to GB brick me? I've looked everywhere and am still noobiously confused.
Anyone know how to unroot w/unlocked bootloader? Is it possible?
bbunsen said:
Same question.
I was previously on GB that was pushed to me OTA. I got bored and rooted, unlocked, and flashed Ken's Alien not thinking about the consequences of not being able to revert to stock thanks to previous root methods like Gingerblur and SBF that made it so easy. I want to get my work email back on my phone, but cannot if I am rooted.
Will flashing a 1.8.3 Fruitcake and then OTA to GB brick me? I've looked everywhere and am still noobiously confused.
Anyone know how to unroot w/unlocked bootloader? Is it possible?
Click to expand...
Click to collapse
"GB that was pushed to me OTA" so you are indeed has the new bootloader so you only way to downgrade will be moto-flash or CWM to 1.83
But why you dont try to download MOTO official SBF 2.3.4/4.5.91 and RSD this the only OFFICIAL MOTO SBF you can RSD with GB new bootloader
the following procedure will bring you device to out-of-the-box state with GB 2.3.4/4.5.91
First have a backup because you phone will be complete clean after this so remove external sd card
1. First format internal sdcard by settings->storage->internal sdcard->format
2. Turn off the phone and press VOL DOWN while your turn ON your phone
3. Wait until "fastboot" tag show up release VOL DOWN and now PRESS VOL UP once to enter to fastboot
4. Now you in fastboot mode "Starting fastboot......."
5. Now go to command windows box (CMD)
(You need moto-fastboot to perform this and you need to be in the same folder where is located moto-fastboot)
moto-fastboot erase boot
moto-fastboot erase system
moto-fastboot erase webtop
moto-fastboot erase recovery
moto-fastboot erase userdata
moto-fastboot erase cache
moto-fastboot erase preinstall
just to make sure everythings is wipe
moto-fastboot -w
after this
moto-fastboot reboot (at the same time press VOL UP and hold until show up "Starting RSD......"
Now start RSD and select the official moto GB 2.3.4/4.5.91 SBF (you can find a copy in dev forum, stickie under the thread of all the SBF's, make sure you chose 2.3.4/4.5.91)
Press start and what until reboot and RSD show up PASS in the status...
This the manual way to do it... and you are 100% you wipe everything...
The other one is doing MSU (motorola software update) and run all the process (in the background what it do is RSD the service SBF of GB 2.3.4/4.5.91) after it finish you can go back an do a factory default restore, inside settings in Android OS
Thanks. I thought about using moto software update, but wasn't sure if it would work. Same with RSD. I just don't wanna brick, but since I won't be RSD downgrading I probably shouldn't be all that worried.
bbunsen said:
Thanks. I thought about using moto software update, but wasn't sure if it would work. Same with RSD. I just don't wanna brick, but since I won't be RSD downgrading I probably shouldn't be all that worried.
Click to expand...
Click to collapse
This is the only SBF without pudding and MOTOROLA OFFICIAL that can be flashed by RSD for now if you already have GB OTA
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
CONFIRMED, IS SAFE TO RSD THIS SPECIFIC SBF FROM MOTOROLA:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
MD5: 56721d893e43b814e95683a00b165555
SHA1: e00786e975b4f1d9fba2ff90c1ee6bbf95bb47b2
I tested both MSU (Motorola Software Update) and RSD and work perfect from GB OTA unlocked
mramirezusa said:
This is the only SBF without pudding and MOTOROLA OFFICIAL that can be flashed by RSD for now if you already have GB OTA
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
CONFIRMED, IS SAFE TO RSD THIS SPECIFIC SBF FROM MOTOROLA:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
MD5: 56721d893e43b814e95683a00b165555
SHA1: e00786e975b4f1d9fba2ff90c1ee6bbf95bb47b2
I tested both MSU (Motorola Software Update) and RSD and work perfect from GB OTA unlocked
Click to expand...
Click to collapse
Does this go for stock locked bootloaders as well. You mentioned you were unlocked. All that I have done on my atrix is root currently. Not to crazy to unlock yet. I'm on the OTA 4.5.91. Have alot of random reboot issues lately and considering this process!
Thanks in advance.
Thanks for the info. I used your fastboot wipe and RSD'd suggeations to SBF. Now my phone appears to be stock. It no longer says unlocked at boot and is not rooted. Exactly what I was looking for.
My first try of using the 183 fruitcake and then OTA update didn't work due to CWM still being there. It may have worked if I had first flashed the stock recovery. I didn't try that.
Thanks again for your assistance!
Sent from my MB860 using XDA Premium App
SGTShark said:
Does this go for stock locked bootloaders as well. You mentioned you were unlocked. All that I have done on my atrix is root currently. Not to crazy to unlock yet. I'm on the OTA 4.5.91. Have alot of random reboot issues lately and considering this process!
Thanks in advance.
Click to expand...
Click to collapse
If you previously installed the OTA update, it should be fine to flash this if locked as well. Its just installing the same software but without root.
The problems after the OTA update happen if you flash a SBF older than gingerbread.
It was the unlocked part of my situation that had me concerned. I haven't messed with bootloaders until this week and was confused and nervous about how that would come into play. If I hadn't unlocked, I wouldn't have hesitated as much to flash the official GB SBF to unroot.
Sent from my MB860 using XDA Premium App
I rooted and flashed GladiAtrix and VividLime theme. How.exactly can I go about flashing my phone to the GB OTA update? I do not want to unlock and end up getting a hardbrick.
Sent from my Vivid Lime GladiAtrix of doooooooooom.
Unlock or do it ota. Only choices.
I voided my warranty.
FluffyCow said:
I rooted and flashed GladiAtrix and VividLime theme. How.exactly can I go about flashing my phone to the GB OTA update? I do not want to unlock and end up getting a hardbrick.
Sent from my Vivid Lime GladiAtrix of doooooooooom.
Click to expand...
Click to collapse
The retail OTA .SBF can be obtained here---> http://www.filesonic.com/file/1507329091/1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
You will only get a hardbrick if you try to flash back to an older build using RSD after you have used the OTA 2.3.4. sbf
Not a big deal, im on the OTA with unlocked bootloader and I have flashed every rom that has come out. Once you RSD to 2.3.4 you might as well delete RSD. No reason you should need it. I recommend unlocking your bootloader before you take the leap to the OTA. Its way easier before the OTA update. If your already on the OTA 2.3.4 you can still use RSD to unlock your bootloader but thats it. It will give you a softbrick but its easily recovered.
Hey Everyone,
It seems that since the bootloader got unlocked, things with the atrix has skyrocketed and there is many things I'm unfamiliar with. I was unfamiliar back then too but managed to get a pseudo rom running.
Anyways, I need help going from a Greyblurred atrix to an updated Atrix with gingerbread , unlocked bootloader , and rooted.
It would be great if anyone could point me in the right direction.\
Thanks ahead of time!
Well I am assuming you are not unlocked, correct? also I will assume you have not done the OTA (Over The Air) update of gingerbread (2.3.5)..
First off, if none of the above has been done at all you need to go here, IHOP and read these directions over, and over, and over before you start to follow them and execute what they say..
after you do that, or if you need further clarification just write back here
I used this http://forum.xda-developers.com/showthread.php?t=1182871 its an auto scripter u will soft brick fix is built in READ EVERYTHING first. Mine actually froze rite after brick and wouldnt allow me to follow instructions exactly,if it happens to u dont freak.just pull battery for a few moments reboot into fastboot and use the fix
http://forum.xda-developers.com/showthread.php?t=1154600
This.
Ahhh, school got super busy and still never got the chance to do this.
So it seems I can use RSDlite to just flash to an older sbf and go through the updates to the now 2.3.4 and then unlock from there and get CM7?
I don't need to back up any apps or anything so can I go straight to flashing SBF right over Greyblur?
impruv said:
Ahhh, school got super busy and still never got the chance to do this.
So it seems I can use RSDlite to just flash to an older sbf and go through the updates to the now 2.3.4 and then unlock from there and get CM7?
I don't need to back up any apps or anything so can I go straight to flashing SBF right over Greyblur?
Click to expand...
Click to collapse
as long as you've never done the OTA before, you can flash a froyo SBF and go back to stock that way.
there's also an unlocked bootloader for froyo in the pudding thread, you don't have to update to 2.3.4 to unlock and get CM7 (which is gingerbread anyways)
just go to the International House of Pudding thread in the dev section and read up on the right .sbf to flash to unlock your bootloader.
Alcapone263 said:
as long as you've never done the OTA before, you can flash a froyo SBF and go back to stock that way.
there's also an unlocked bootloader for froyo in the pudding thread, you don't have to update to 2.3.4 to unlock and get CM7 (which is gingerbread anyways)
just go to the International House of Pudding thread in the dev section and read up on the right .sbf to flash to unlock your bootloader.
Click to expand...
Click to collapse
That's correct, I think I'm still on 1.8.3? Though because I'm running GreyBlur the phone thinks im on 1.5.3 or which ever was before 1.8.3