Related
I bought this phone from someone in craigslist. He claim this phone never been turn on. But when I get home and try to turn it on, it wont. I don't know what to do. Please help!
You didnt try it before you bought it? Is it charged? You might be screwed
Sent from my SGH-T959 using XDA App
Does anything show up on the screen?
If you can get into download mode than you'll be fine.
Typos and other gibberish courtesy of Swype
He probably bricked it and couldn't figure out how to fix it and sold it to you. Or it was broken when he got it.
To try to get it into Download mode
1) Take out the battery and put it back in again after about 10 seconds (to give it time to empty all power in the phone)
2) Plug the USB cable into the computer (you need to get one if he didn't give it to you)
3) Hold down the Volume buttons
4) Plug in the USB cable into the phone
Your phone will start the download mode unless it is Hardware locked.
imiedeen said:
I bought this phone from someone in craigslist. He claim this phone never been turn on. But when I get home and try to turn it on, it wont. I don't know what to do. Please help!
Click to expand...
Click to collapse
I guess you know why he claims to have never turned it on
Constantly Drinking
Thats my mistake. I just assume its brand new nothing will happen.
swehes said:
He probably bricked it and couldn't figure out how to fix it and sold it to you. Or it was broken when he got it.
To try to get it into Download mode
1) Take out the battery and put it back in again after about 10 seconds (to give it time to empty all power in the phone)
2) Plug the USB cable into the computer (you need to get one if he didn't give it to you)
3) Hold down the Volume buttons
4) Plug in the USB cable into the phone
Your phone will start the download mode unless it is Hardware locked.
Click to expand...
Click to collapse
Hey Swehes. It still dead. What do you mean by Hardware locked? How I'm gonna solve that? Thanks.
Whoever sold it to you is a piece of ****. I hope something awful happebs to him or her. Sorry about what happened. This is why you always need to test stuff before you buy used! Cars, phones, etc.
imiedeen said:
I bought this phone from someone in craigslist. He claim this phone never been turn on. But when I get home and try to turn it on, it wont. I don't know what to do. Please help!
Click to expand...
Click to collapse
Email me [email protected]
Sent from my SGH-T959 using XDA App
call the cops, he can be charged with false advertisement and fraud. i had this happen with an xbox 360 that was banned from xbox live
djkdawg said:
call the cops, he can be charged with false advertisement and fraud. i had this happen with an xbox 360 that was banned from xbox live
Click to expand...
Click to collapse
Thank you for your advise. But I don't know who he is and where he live. Stupid me, I deleted his phone number. I will contact him soon via email.
If you can get it to boot to at least the Vibrant/Samsung screen, then you can recover it using Odin and adb.
Sent from my SGH-T959 using XDA App
Dont know if this is the right section but does anyone have any idea on what i can do? my phone cant get into recovery or download mode after flashing a rom. it just remains on the screen that says Vibrant and Samsung... no, it didnt have a lagfix so no voodoo was enabled....help please!! thank ya
Not the right section but...
Battery pull your phone then put it back
Plug in the USB
Hold both volume buttons down
THen press power button (while still holding volume up&down)
The screen should pop up with something (vibrant, phone!computer, etc)
Once that happens, let go of the power button (BUT NOT THE VOLUME!)
should get into download mode
Yea, i tried all of the little button combinations to get to either recovery or download..... nothin happened! im not new to this so i know about how to actually get there but its just not doing it now.....thanks anyway though!
Home made jig time
Sent from my SGH-T959 using XDA App
Go to the vibrant directory thread, there is a link there for the jig,i think thats the only thing you can do now! That work for me, good luck!
Sent from my SGH-T959 using XDA App
ADB is your friend.
>adb reboot download
Voila!
Yes. Wrong section.
Its takes longer when tryin to enter download mode from the soft brick try it again n wait
Sent from my SGH-T959 using XDA App
These instructions worked perfectly for me.
http://www.youtube.com/watch?v=rqxearzXrVY
Ctp3 said:
Dont know if this is the right section but does anyone have any idea on what i can do? my phone cant get into recovery or download mode after flashing a rom. it just remains on the screen that says Vibrant and Samsung... no, it didnt have a lagfix so no voodoo was enabled....help please!! thank ya
Click to expand...
Click to collapse
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in UBS
Thats it!
It may sound stupid to you. But after numerous time trying to get to download mode, I succeeded by I pulling the microsd ou .
Yea, it finally worked....i just tried different button combinations n lucked up...thanks u guyz.... Im back in business
Sent from my SGH-T959 using XDA App
Good, now nuke thread.
metalman3797 said:
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in USB
Thats it!
Click to expand...
Click to collapse
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
I had the same issue yesterday after an ODIN flash failed. On the CM forum, I believe, was instructions, linked in the Vibrant Bible.
1. Pull SD and SIM
2. Plug USB to phone
3. Plug USB to PC
4. insert batter and wait for the icon to come up showing that your battery is charging
5. Hold Vol UP and DOWN, press power, hold power ONLY until the screen goes black, then release.
6. Continue to hold Vol Up and Down.
This SHOULD bring you into Download mode so you can connect ODIN again. Worked for me after a few tries. Don't give up, keep trying (Even though you want to either whack your forehead or throw the phone)
Another way I have seen it listed is to do all of the above until the inset battery part, and skip the waiting to see the battery charging icon. Hold the buttons with the USB connected, then insert the battery with the buttons pressed.
Hope that helps you out, as I know how frustrating it can be to have a soft brick on your hands.
r3skyline said:
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
Click to expand...
Click to collapse
Glad i could help, i figure it would save some Vibrants from being thrown out a window lol
use odem for ur phone
You_are_the_man.
Originally Posted by metalman3797
I was pulling my hair out for a day messing with the same issue
Turn your phone off
Hold down the volume up + down and plug in USB
Thats it!
Click to expand...
Click to collapse
this is the easiest method out there and should be sticked.
it doesnt matter if its connected to a wallcharger or pc, it will work no matter what.
works for me EVERY time.
Click to expand...
Click to collapse
agreed, best method ever!!!! just pretty much turned my day around lol.
Hi all, i am running the latest version of Bionix i went to hit the reboot option and accidentally selected the download mode button. I pulled the battery out before it fully shutdown, me being impatient. When i put the battery back in the phone immodestly turned on and tried to boot, and stays on the vibrant screen for about 2-3 seconds then shuts off and try's to boot back up again on its own. Also when plugged in it continues to boot loop, it never shows that it is charging, only the battery with the loading circle, then ****s off and repeats.
I am not new to modding, and i am not new to getting my phone into recovery or download mode. The problem is the phone does not respond to the hardware keys, and i am positive that it used to be able to reach download mode via keys, i do not have a hardware locked vibrant.
I guess my question lies in the realm of another way to reset the phone, maybe via shorting pins or something? Does anyone know of an alternate method that does not rely on keys or software to reset the phone?
Thanks in advanced!
A jig
Sent from my SGH-T959 using XDA App
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
You might have to have odin up and running before you do the battery pull
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Good point !!!
daddysays said:
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
Click to expand...
Click to collapse
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
duboi97 said:
A jig
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Please explain.
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
almyz125 said:
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
Click to expand...
Click to collapse
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
dougstoner said:
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks for the info, i may look into getting/making a jig. I would be nice to have around.
daddysays said:
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Click to expand...
Click to collapse
Thanks again.
LovellKid said:
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
Click to expand...
Click to collapse
I've tried that method, it used to work for me. This soft brick is different than any other I've encountered. The phone has never automatically tried to boot when i put the battery into it, it makes things harder. But thanks and ill give it ago again.
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
almyz125 said:
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
Click to expand...
Click to collapse
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Also try different combos of being plugged in and not. And recovery or download mode. Recovery will be just as useful as dl mode.
Sent from my SGH-T959 using XDA App
daddysays said:
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
A jig is THIS, it shorts out pins in the micro usb port forcing it to download mode. I am positive i have the correct drivers and the sdk installed right. This isn't the first time I've been soft bricked and i am very familiar with DL mode and Recovery, and how to reach them traditionally. This soft brick is different though for what ever reason. I am going to have to try this jig, and if that doesn't work, i think ill have to read up about the jtag pins on it, if anyone has more information on jtaging a Galaxy S please post!
Did you ever end up trying the jig? I'm having the exact same problem you were. Thanks
I hard bricked a vibrant by trying to flash a rom on a low battery. Battery died in the middle of rebooting thus killing my vibrant with no way of recovery (seriously, charged the battery and the phone still wouldn't turn on... at all). Anyway, while trying to fix it, I actually made a jig. It's a lot easier than it sounds. You basically cut the plug that goes into your phone off of the cord down to where you can see all of the wires. Once you do that you break off the plastic shell that covers the plug. You then use a 301k resistor (I couldn't find that exact one so I bought 3 x 100k resistors and a 1k resistor then twisted them together).. plug the usb side into your phone then touch the opposing ends of the resistor onto wires 4 and 5 and it should go into download mode. You don't necessarily have to solder the resistor to the wires but you can. It makes it a bit easier considering you can't touch the wire part of the resistor or the static will mess up the voltage. Otherwise, Amazon sells jigs for a few bucks.
I wanted to post the url for the site that I found useful in making a jig but because I'm a "junior user" I can't. So if you search for "usb jig" on amazon there are a few; if you want to make one google "how to unbrick samsung vibrant" there is an article on factoidz called "How to unbrick your samsung vibrant/galaxy s" which I found to be the most useful.
Hope this helps!
I bought a jig off ebay and it worked like a charm! Worth its weight in gold! I now have a working phone again after being phoneless for 5 days.
Failed to replace stock recovery now get only there.
Hi, similar situation please help.
From stock 2.1 I rooted with King root Chinese zip then to go for a new ROM I renamed a cwm zip in update.zip and I read replacing stock recovery..... and saw this cwm just a couples of times, as it revert to stock recovery and doesn't switch on anymore, show grey battery logo fixed when charging, and now after removing the battery for long it goes in stock recovery se2 , cleaned cache and data but nothing change.
Is there please a solution without PC?
Thanks
Hi evereybody, I hope you can help me.
My problem is yesterday I was trying to go back to Official rom in my SGS2 AT&T version and I Flashed it with ODIN and everything was ok but when the phone rebooted it stocks in AT&T Logo and nothing happened, I´ve tried many solutions like this threads:
http://forum.xda-developers.com/show...php?p=18759297
http://forum.xda-developers.com/show....php?t=1325282
http://forum.xda-developers.com/show...3#post19898373
but nothing happened, so, the problem is I can not enter to download mode because my phone doesn´t turn on anymore, please, I need your help, I´me really sorry if this thread doesn´t belong here, I will aprecciate if some moderator move it correctly for me.
I need your help guys
Power the phone off completely. Pull the battery. Put the battery back in after about 30 seconds. Hold down both volume buttons while also plugging in the USB cable. Keep the vol buttons held down until you see the d/l screen come up. Let go of the buttons and then click vol up once to proceed to d/l mode.
Sent from my SAMSUNG-SGH-I777 using xda premium
Kadin said:
Power the phone off completely. Pull the battery. Put the battery back in after about 30 seconds. Hold down both volume buttons while also plugging in the USB cable. Keep the vol buttons held down until you see the d/l screen come up. Let go of the buttons and then click vol up once to proceed to d/l mode.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I will try that but the thing is the phone doesn´t turn on I can not do anything is dead
nothing happened Kadin the phone is dead
DarkEvilGod said:
nothing happened Kadin the phone is dead
Click to expand...
Click to collapse
Sorry I guess I missed that part. Thought it was stuck at the AT&T screen. Try leaving the battery out for a good ten minutes or so and then seeing if it responds by plugging in the charger.
Sent from my SAMSUNG-SGH-I777 using xda premium
Kadin said:
Sorry I guess I missed that part. Thought it was stuck at the AT&T screen. Try leaving the battery out for a good ten minutes or so and then seeing if it responds by plugging in the charger.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Ok I will try that and after that I´ll let you know what happened thanks.
Nothing happened? any other solution?
What was the battery level like when the phone last turned on? If you can't get it to power up at all, there's only so much you can try. I'd try plugging it into a different outlet as well as maybe the computer and see if you can get any response from it.
When you have the battery in and press and hold power, do you see the softkeys briefly blink like they normally do when turning the phone on? It's possible that the battery is somehow the problem but I guess it could be the phone too. Would love some other input from other people cause I'm at a loss on what else to try.
Kadin said:
What was the battery level like when the phone last turned on? If you can't get it to power up at all, there's only so much you can try. I'd try plugging it into a different outlet as well as maybe the computer and see if you can get any response from it.
When you have the battery in and press and hold power, do you see the softkeys briefly blink like they normally do when turning the phone on? It's possible that the battery is somehow the problem but I guess it could be the phone too. Would love some other input from other people cause I'm at a loss on what else to try.
Click to expand...
Click to collapse
It was at 30% I think the battery is discharged but I don´t know how to recharged.
When I press and hold power or vol up and down the softkeys don´t blink.
Yes I know I need more people to give solutions but thank you very much Kadin.
Well if you think it's fully discharged, leave it plugged into the wall for a while. It's possible that it dipped down below the point where it normally shuts off (around 5%) and may need a good long charge to get it back alive. I'd attempt that if you haven't already.
Kadin said:
Well if you think it's fully discharged, leave it plugged into the wall for a while. It's possible that it dipped down below the point where it normally shuts off (around 5%) and may need a good long charge to get it back alive. I'd attempt that if you haven't already.
Click to expand...
Click to collapse
I´m gonna leave it again all night but sincerly I don´t think that might work.
DarkEvilGod said:
but when the phone rebooted it stocks in AT&T Logo and nothing happened
Click to expand...
Click to collapse
So - it got to the AT&T logo - tell us EXACTLY what you did after that.
It might help too if you explain what it was you did to the phone to try to get back to att stock.
Include the filenames used, and if you Odined, where you used them.
Just a thought,
AoN
Sent from my SAMSUNG-SGH-I777 using XDA App
Dead Phone
DarkEvilGod said:
Hi evereybody, I hope you can help me.
My problem is yesterday I was trying to go back to Official rom in my SGS2 AT&T version and I Flashed it with ODIN and everything was ok but when the phone rebooted it stocks in AT&T Logo and nothing happened, I´ve tried many solutions like this threads:
I need your help guys
Click to expand...
Click to collapse
There is a very good chance that if you charge the phone with wall charger
to be sure the battery is not dead and then use a JIG which will get it into
download mode you will be able to reflash the stock rom.
You can buy a JIG for less than $2 bucks including shipping on eBay.
Be sure that when you do get it into download mode to re-download
the stock rom just to be sure that the rom file is not corrupted.
Good luck!
Entropy512 said:
So - it got to the AT&T logo - tell us EXACTLY what you did after that.
Click to expand...
Click to collapse
I´ve reflashed this rom I777UCKH7 OCD No BL.7z two times with odin and it said "OK" the phone reboot but when the loggo appears stocks there, the battery is not dead, yesterday I took the phone to some center and they´ve said is not dead but I can not do anything also with the jig.
Also I used this thread to back to return to original rom
http://forum.xda-developers.com/showthread.php?t=1313659
DarkEvilGod said:
I´ve reflashed this rom I777UCKH7 OCD No BL.7z two times with odin and it said "OK" the phone reboot but when the loggo appears stocks there, the battery is not dead, yesterday I took the phone to some center and they´ve said is not dead but I can not do anything also with the jig.
Also I used this thread to back to return to original rom
http://forum.xda-developers.com/showthread.php?t=1313659
Click to expand...
Click to collapse
The way you phrased your description above make it sound like you flashed a .7z file in Odin3. If you tried to do that, it wouldn't work, or course. The file you named, I777UCKH7 OCD No BL.7z contains an executable file that is an Odin one-click downloader. You have to extract the file from the 7 zip archive first, then run the file in windows, then connect your phone to the pc. Maybe that's what you did but your description is confusing?
creepyncrawly said:
The way you phrased your description above make it sound like you flashed a .7z file in Odin3. If you tried to do that, it wouldn't work, or course. The file you named, I777UCKH7 OCD No BL.7z contains an executable file that is an Odin one-click downloader. You have to extract the file from the 7 zip archive first, then run the file in windows, then connect your phone to the pc. Maybe that's what you did but your description is confusing?
Click to expand...
Click to collapse
Sincerely I don´t remember what else I did but the problem is I can not do anything because I can not enter to download mode or recovery, the phone doesn´t turn on even with jig.
This happened on my captivate based on what I have read your phone is hard bricked and is basically a large paper weight now. But don't take my word for it I sold my cappy on Ebay when I hard bricked it and about a month later there was a fix for it with a jtag goodluck
Sent from my GT-I9100 using xda premium
I also tried the jig I couldn't get any response... It wouldn't turn on or anything
Sent from my GT-I9100 using xda premium
Hi,
My vibrant will not turn on when on battery (NOTHING appears on the screen when power button pressed). When plugged in, the charging screen appears and it appears to be charging, but if I press the power button, nothing happens. I have tried holding volume up and down and power button, but this does nothing whether its plugged in and charging or its on battery.
Before this happened it was restarting over and over when I was trying to charge it.
So in conclusion the only screen I can get is the battery charging screen, that is it. This entire time I have been testing the sim card and sd card have been removed.
Does anyone know how I can fix this?
Thanks
More info, did this happen after you flashed something? are you aquainted with Odin1.85, AIO toolbox is a great place to start. If I can help in any way i will.
This happened after normal use, it was actually after the battery died and I tried to charge it with a car charger, and then the phone just kept resetting over and over. It wouldnt get very far in the start up process. But I did not flash it. I am not familiar with any of that but I can give it a try.
Thanks
dwills898 said:
This happened after normal use, it was actually after the battery died and I tried to charge it with a car charger, and then the phone just kept resetting over and over. It wouldnt get very far in the start up process. But I did not flash it. I am not familiar with any of that but I can give it a try.
Thanks
Click to expand...
Click to collapse
Have you tried a new battery? Sounds like your battery will not charge. Just for future reference, sometimes a car charger can damage your phone's battery, even completely kill it. When you press the gas pedal your car's battery charge fluctuates and can damage your phone that way, rare but it happens. Not to say that's the case here but it could also be a custom ROM. I was running a custom ROM called lithium volt and if the battery completely died the phone would not boot back up, even when plunged into a charger. Some roms a require certain amount of battery power to boot up.
Sent from my SGH-T959 using xda premium
clean your micro usb port , use coffee filter n alcohol,clean it gently
Sent from my cm_tenderloin using xda app-developers app
Hey dudes .... I got the thing to go into download mode, what should I do now? I am learning this as I go.
dwills898 said:
Hey dudes .... I got the thing to go into download mode, what should I do now? I am learning this as I go.
Click to expand...
Click to collapse
Use odin to flash back to stock. Read this thread http://forum.xda-developers.com/showthread.php?t=849028
Sent from my SGH-T959 using xda premium
Ok I used odin and I restored everything and my phone booted up like normal. But then while using the phone, I realize when I press the power button, it does nothing. It doesnt lock the phone, it doesnt shut down the phone, I get no response. So I think my problem before was simply the power button was not working. Has any one had this problem, can I fix it?
dwills898 said:
Ok I used odin and I restored everything and my phone booted up like normal. But then while using the phone, I realize when I press the power button, it does nothing. It doesnt lock the phone, it doesnt shut down the phone, I get no response. So I think my problem before was simply the power button was not working. Has any one had this problem, can I fix it?
Click to expand...
Click to collapse
That's unfortunate, if you are comfortable soldering then you can just order a replacement button. Mobiletechvideos.com fixes that problem, they fix almost everything else too. Very trusted source so you can be sure to get what you paid for. If you can solder then buy a replacement part on ebay or you can go here http://mobiletechvideos.mybigcommerce.com/samsung-i9000-t959-t959v-power-button-repair/ and send your Vibrant t959 to mobile tech.
Sent from my SGH-T959 using xda premium
Ok thnks for the help. I ordered a new power button and I soldered it in. That was the problem. The power button just failed and needed to be replaced.
dwills898 said:
Ok thnks for the help. I ordered a new power button and I soldered it in. That was the problem. The power button just failed and needed to be replaced.
Click to expand...
Click to collapse
No problem; you must be pretty good at soldering, nice work.
Sent from my SGH-T959 using xda premium
sgh-t959
i recently aquired a samsung vibrant sgh-t959. It had issue charging and i determined that it was the micro usb charge port. i messed with it a bit like i did before to get it to charge with no response as before but now when i try to turn the phone on it only shows the loading clocklike bars as if it were just plugged in to charge before it loads the charging bar when its turned off. any ideas on how to simply repair this at all? i know replacing the charge port would be one option but i have no idea on how to. maybe one of the contacts are touching another on the charge port?