Related
I have a week trying to install a new ROM to my phone (xperia mini pro). I follow the instructions, install the recommended kernel for each Rom. When i finish installing the ROM i reboot the phone put the kernel logo and don't do anything else (the last time i let it in the kernel logo for 10 hours and it didn't work).
I fix it using Wotan server. But what i really care about is that i want to prove new Rom, so if someone can help me i will be really thankful.
PS: Sorry if you think my english is bad, is because my main language is not english
rivezu said:
I have a week trying to install a new ROM to my phone (xperia mini pro). I follow the instructions, install the recommended kernel for each Rom. When i finish installing the ROM i reboot the phone put the kernel logo and don't do anything else (the last time i let it in the kernel logo for 10 hours and it didn't work).
I fix it using Wotan server. But what i really care about is that i want to prove new Rom, so if someone can help me i will be really thankful.
PS: Sorry if you think my english is bad, is because my main language is not english
Click to expand...
Click to collapse
Did u unlock your bootloader ??
faru123 said:
Did u unlock your bootloader ??
Click to expand...
Click to collapse
Yes it was with cwm, unlocked bootloader and rooted.
flash the proper kernel for you device and always format/factory reset before installing ROM
singh_dd93 said:
flash the proper kernel for you device and always format/factory reset before installing ROM
Click to expand...
Click to collapse
I install the kernel recommended for each ROM every time i try to install a ROM. And i do all the wipes available in CWM.
What phone and what ROM are you trying to install?
Sent from my Xperia Live using xda premium
Phone: Xperia mini pro (sk17)
ROMS: -Nerodroid
-Hybrom
With both ROMS happend the same
i have some problem use nero rom to..
Flash stock ftf using Flashtool and then flash Xkernel to use nerodroid rom
Sent from my Xperia Mini using XDA
Hello,
I'm having the same problem, I don't get it at all. I bought my Xperia Mini Pro (SK17i) yesterday and so far I have been only able to flash stock rom and MiniCMSandwich AOSP Android 4.0.4 RC3, both of which work fine.
With all other roms I get stuck on the logo (depending on kernel - Sony, Sony Ericsson or Free Xperia logo). I do full wipe, dalvik cache etc. but nothing helps.
So far I tried: FXP 117 7.2.0, FXP 117 9.0.0 and XROM™ ICS RC7.
I tried different basebands, flashing in different order etc., no matter what I get stuck on the logo.
Could someone post a detailed step-by-step instruction how to flash either FXP or the XROM on the Mini Pro? Which baseband should I use (and how do I know it's the baseband's fault when the rom doesn't work), what about Wi-Fi etc.
I flashed Galaxy S+ (I9001) before and didn't have any of these issues.
aidennwitz said:
Hello,
I'm having the same problem, I don't get it at all. I bought my Xperia Mini Pro (SK17i) yesterday and so far I have been only able to flash stock rom and MiniCMSandwich AOSP Android 4.0.4 RC3, both of which work fine.
With all other roms I get stuck on the logo (depending on kernel - Sony, Sony Ericsson or Free Xperia logo). I do full wipe, dalvik cache etc. but nothing helps.
So far I tried: FXP 117 7.2.0, FXP 117 9.0.0 and XROM™ ICS RC7.
I tried different basebands, flashing in different order etc., no matter what I get stuck on the logo.
Could someone post a detailed step-by-step instruction how to flash either FXP or the XROM on the Mini Pro? Which baseband should I use (and how do I know it's the baseband's fault when the rom doesn't work), what about Wi-Fi etc.
I flashed Galaxy S+ (I9001) before and didn't have any of these issues.
Click to expand...
Click to collapse
use baseband 64, with baseband 70 people are complaining about battery drain problems
guide for installing cm7 is on original thread
here:
http://forum.xda-developers.com/showpost.php?p=16822393&postcount=3
I do exactly as it says. I had to flash stock rom before that, because update zip wouldn't work if I started from AOSP (or if I wanted to apply it after flashing FXP)
BTW, do I really have to flash stock ftf (kernel+baseband), which overwrites my CWM each time I want to flash FXP? I hate losing CWM.
Anyway, I did this:
1. I put the update.zip on the sdcard
2. I flashed the boot.img I unpacked from the update.zip using fastboot (went fine)
3. I applied update.zip using CWM
4. I did factory reset from CWM and wiped dalvik cache
After reboot - it hangs on the Free Xperia logo. I also tried flashing Rage kernel 2.8 with the same result. Oh, and does it matter if I flash kernel before or after the rom?
aidennwitz said:
I do exactly as it says. I had to flash stock rom before that, because update zip wouldn't work if I started from AOSP (or if I wanted to apply it after flashing FXP)
BTW, do I really have to flash stock ftf (kernel+baseband), which overwrites my CWM each time I want to flash FXP? I hate losing CWM.
Anyway, I did this:
1. I put the update.zip on the sdcard
2. I flashed the boot.img I unpacked from the update.zip using fastboot (went fine)
3. I applied update.zip using CWM
4. I did factory reset from CWM and wiped dalvik cache
After reboot - it hangs on the Free Xperia logo. I also tried flashing Rage kernel 2.8 with the same result. Oh, and does it matter if I flash kernel before or after the rom?
Click to expand...
Click to collapse
rage kernel is not compatible with cm7,
mostly kernel is flashed before the rom, but either way should work i guess..
try formatting system in cwm> mounts and storage
gandhar said:
try formatting system in cwm> mounts and storage
Click to expand...
Click to collapse
Before or after flashing the rom?
aidennwitz said:
Before or after flashing the rom?
Click to expand...
Click to collapse
before
.
edit:flash kernel before
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
aidennwitz said:
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
Click to expand...
Click to collapse
often the kernel is broken on CM threads, TRY the kernel from this thred..
don't go over all that, just install this kernel, then install update zip from cm7..
no need to flash original ftf
gandhar said:
often the kernel is broken on CM threads, TRY the kernel from this thred..
don't go over all that, just install this kernel, then install update zip from cm7..
no need to flash original ftf
Click to expand...
Click to collapse
Which kernel?
PS. Thanks for helping me.
aidennwitz said:
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
Click to expand...
Click to collapse
That's because for some stupid reason you formatted the system partition, which must not be done on some ROM installations.
The CM7 installation requires info from the system folder, but since you formatted it, you don't have the info on your phone and installation cannot be installed.
Reinstall stock firmware, follow the same procedure, but do NOT format system, but do make factory reset, wipe cache and dalvik cache.
Well, I was asked to try formatting /system.
Ok, again then. BTW, is there a pre-rooted .62 stock rom somewhere? I only see .69, which isn't good AFAIK.
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
Solutionfor Normal Users
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) After that don't switch on your mobile. Download and extract the kernel file which i attached with this post (kernel_coconut-v4.zip) and flash it
via Fastboot Mode in Flash Tool.
4) After that switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
Solution for advanced users
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
JK347 said:
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
Click to expand...
Click to collapse
What is this touch issue? How does installing hybrom fix it? What if you dont want hybrom?
Cheers,
Evil.
Reason of Touchscreen issue
My Wt19i touchscreen is damaged when i installed rom kernel and rom. But it was solved when i installed hybrom v10 and after hybrom v12 with x kernel. That is why i posted the solution here.
JK347 said:
My Wt19i touchscreen is damaged when i installed rom kernel and rom. But it was solved when i installed hybrom v10 and after hybrom v12 with x kernel. That is why i posted the solution here.
Click to expand...
Click to collapse
Flashing back to stock didnt fix it? Because if its not a HW issue then flashing to stock give you back your stock files and kernel so then your touch should be working again. Flashing hybrom v10 then v12 will do nothing other than give you the files of that rom.
What was the rom you installed that broke your touch? There are only two possible reasons for that to happen, 1, you had a corrupt .zip file, or 2, you flashed a rom and kernel that was not for your device.
Cheers,
Evil..
WT19i Touchscreen Issue
evilbarcode said:
Flashing back to stock didnt fix it? Because if its not a HW issue then flashing to stock give you back your stock files and kernel so then your touch should be working again. Flashing hybrom v10 then v12 will do nothing other than give you the files of that rom.
What was the rom you installed that broke your touch? There are only two possible reasons for that to happen, 1, you had a corrupt .zip file, or 2, you flashed a rom and kernel that was not for your device.
Cheers,
Evil..
Click to expand...
Click to collapse
I tried 3 stock firmwares and other some roms also but the touchscreen problem was not solved. So I just tried to use hybrom v10, then touchscreen worked partially. Then i installed hybrom v12 over it without wiping any user data and dalvick cache. Voila it was worked !!! that is why i posted that solution here.
Anyway you just try this solution when you have this touchscreen problem.
JK347 said:
I tried 3 stock firmwares and other some roms also but the touchscreen problem was not solved. So I just tried to use hybrom v10, then touchscreen worked partially. Then i installed hybrom v12 over it without wiping any user data and dalvick cache. Voila it was worked !!! that is why i posted that solution here.
Anyway you just try this solution when you have this touchscreen problem.
Click to expand...
Click to collapse
Sorry I don't mean to sound like I'm doubting you, I'm just really curious as to how that works.
It still not work
I did it. but my wt19i is not work. Now, my Touchscreen have been died.
Before that, my wt19i is ok except touchscreen, sometimes work, sometimes no. but i can use it. :crying:
Pls help me and show me how to fix it. :highfive:
RE : WT19i Touchscreen Solution
silverddn9x said:
I did it. but my wt19i is not work. Now, my Touchscreen have been died.
Before that, my wt19i is ok except touchscreen, sometimes work, sometimes no. but i can use it. :crying:
Pls help me and show me how to fix it. :highfive:
Click to expand...
Click to collapse
Which solution that you used recently ?!!
JK347 said:
Which solution that you used recently ?!!
Click to expand...
Click to collapse
I installed rom kernel and rom follow your instructions.
I did twice. but it still not work.
will this work on locked bootloader??
sorry my bad english ..
thank you friend!:good:
jsebarj said:
thank you friend!:good:
Click to expand...
Click to collapse
nice tutor :victory:
help!!
sup dude could you upload the dropbox file??
only works for unlocked bootloader?
Touch Issue ?? there isnt any touch issue on my wt19i
Thank you is working
Can anyone help me? I've done this procedure several times.
However, the touch of my wt19a not yet returned to work. what do
I do?
hordanofear said:
Can anyone help me? I've done this procedure several times.
However, the touch of my wt19a not yet returned to work. what do
I do?
Click to expand...
Click to collapse
Maybe hardware problem, Send it to Repair Center.
Mine was Hardware problem, And it solved
Need Urgent Help
JK347 said:
Solution for Advanced Users:
1) flash stock firmware (.62)
2) flash x kernel or rage kernel for CWM
3) install Hybrom V10 via CWM
4) install Hybrom V12 via CWM without wiping any data ad Dalvik Cache
5) Reboot
Click to expand...
Click to collapse
I did as you said and I was going as you mentioned i.e; after step 3 my touch screen will work partially, but problem I am facing is totally related to step 4
1- couldn't find hybrom v12 easily, after half an hour I found it but not sure if its a working one or not.
2- after installing it via cwm i restarted but touch didnt work.
kindly upload each and every required files asap because this is the first time my touch screen responsed to something .
Thanks for your help.
Locked Bootloader
Hi, I have a WT19a and I have locked the bootloader, I have the problem that the display works partially, what is the solution for locked bootloader? Thanks and sorry for my English (google translator)
Dear Developer,
I've install Rom CM9.1 with CWM, but my phone wasn't running. IT's always at logo SONY. After that, I install back another rom, but the same thing, SONY always in my phone.
I don't know how to restore my phone?
I can only access fastboot.
Plz... Help me.
Wrong section.. Flash back use flashtool..
Flash the stock kernel with recovery and then a stock based rom.
Sent from my Xperia P using xda app-developers app
I can't find stock kernel with recovery, and When I flash Kernel, I don't know what's doing next? (Sorry my english not good)
What worked for me was:
Extract CM9.1 kernel from zip
Put zip on internal SD card
Flash CM9.1 kernel with flashtool
Reboot to recovery with flashtool (or press buttons until recovery starts)
Install zip from SD card
Creqaw said:
What worked for me was:
Extract CM9.1 kernel from zip
Put zip on internal SD card
Flash CM9.1 kernel with flashtool
Reboot to recovery with flashtool (or press buttons until recovery starts)
Install zip from SD card
Click to expand...
Click to collapse
I couldn't explain better. When you follow this step by step it should work!
Sent from my Xperia P using xda app-developers app
I've done to comback stock ROM. Thanks all!
Hello everyone, i tried to install experience 2.1.3
phone was rooted and had CWR, so i download the files:
i followed this tutorial:
theandroidromDOTcom
/install-sony-xperia-p-jb-experience-v2-1-3-custom-rom-android-4-0-4-ics/2/( i cant post outside links cause im new)
but didnt created a back-up now after i "installed" the rom the phone keeps bootlooping.
what can i do to fix it?
Download flashtool, 6.2.A.1.100 stock rom ftf, install drivers, and flash!
Sent my Carbonised Xperia P
Change rom or try to reflash that rom
If you want another rom without flash the stock:
-Download another rom compatible with your kernel
-enter in CWM(you can enter in cwm also in bootloop)
-mount and storage
-mount usb
-mount sd card
-copy the rom on sd
-unmount sd
-do the wipe that are request
-flash the rom
-(again wipe if that are request)
-reboot
Now you have another rom without flash the stock, otherwise use flashtool and flash the stock rom
If you want try to reflash this rom enter in CWM and follow the guide of the dev
(sorry for my bad english )
download the firmware for xperia p:
http://www.4shared.com/file/btiYhirl/xperia_p__lt22i__62a1100_ce.html
then flash it using flashtool:
(download link and guide)
http://forum.xda-developers.com/showthread.php?t=2240614
problem not solved
the phone can be entered in cwr however if i try to enter it to fastboot, the blue leds turns on, but pc doesnt recognizes it nor allows me to install the drivers. xperia P has no sd card slot so its not possible to add a new rom D:
Its flashmode..... Drivers in /flashtool/drivers
Sent my Carbonised Xperia P
Internal Memory
diegorifu22 said:
the phone can be entered in cwr however if i try to enter it to fastboot, the blue leds turns on, but pc doesnt recognizes it nor allows me to install the drivers. xperia P has no sd card slot so its not possible to add a new rom D:
Click to expand...
Click to collapse
But you have the internal memory, put the rom there