Hey guys,
Basically ive installed LumiaTrix on my Nokia Lumia 710. I just want to get rid of it and install stock rom. I have a qualcomm bootloader. Could someone please tell me how to do this step by step. As ive not seen a post which tells you how to flash back to stock rom or update to a stock rom.
Also done anyone know how to get facebook push notifications working. i have enabled it in facebook app itself but no notifications come through.
thanks
I can help
Hello I can help you to install the stock rom. Do you want?
I need some help too...
Can a stock rom be installed on Qualcomm bootloader?
If I need to go back to DLOAD, Is there a "ease" guide?
Thnks
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
Thanks!!! it is the same procedure than for unlocked roms.
If I install a stock rom (with Qualcomm bootloader) can I upgrade the phone with Zune?
lrhage said:
Thanks!!! it is the same procedure than for unlocked roms.
If I install a stock rom (with Qualcomm bootloader) can I upgrade the phone with Zune?
Click to expand...
Click to collapse
I'm not 2 sure about Upgrade with Zune but I don't no why it would be a problem
Even if for some reason you couldn't you could send the updates via cab sender
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
I have done all the steps but i have one problem...
WHen is the time to flash the rom from nokia care suit or download manager , my mobile cannot recognised from the computer , it says Qualcomm CDMA technologies MSM cannot recoginsed...So without connection to to the pc i cannot flash the rom ...Do u have any advice...
After installing the qualcomm drivers nokia care suit recognised my mobile (Nokia lumia 800) but now when i press start recovery its says that it lost connection with my mobile again....!!!
flashed the content in image1 on last ROM flash
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
I flashed the 2 files in image1 folder
AMSS and EMMCBOOT for the custom ROM below
http://forum.xda-developers.com/showthread.php?t=1654415,
can i still revert back to the stock ROM?
When i flash stock ROM, after flashing stock ROM i stuck at NOKIA logo
Related
Hi, a month ago I successfully flashed the latest Rainbow ROM on my Lumia 710 using Nokia Lumia Downloader 0.4, now I wanted to restore the DLOAD using NSS .50 but when I press volume+ and connect the USB cable I only see NAND DIsk Drive instead of Nokia USB Connection, using device manager I can see that QUALCOMM is active and I cancel on formatting memory, my device still boots up but I just want DLOAD back...
Can someone please tell me what I need to do to restore the original DLOAD?
thank you
ok got what I wanted by following this guide, but I wonder if it's possible to revert to DLOAD again...
http://forum.xda-developers.com/showpost.php?p=29635343&postcount=4
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM (http://forum.xda-developers.com/showthread.php?t=1665821) as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
Click to expand...
Click to collapse
this works for me: http://forum.xda-developers.com/showthread.php?t=1702815
Hello guys!
Let me tell you a story...
I bought an Lumia 710 a few days ago and now I want do debrand it and update it to Windows Phone 7.8. I've followed every single tutorial I could find on the internet, starting from debranding to unlocking bootloader and jailbreaking it. Didn't tried everyone in fear of messing the phone up.
I ended up on Nokia Care Suite with a few firmware files and a very huge desire to update my phone. The matter is that, as soon as I connect my phone to start the flashing process on NCS, it reboots (the phone), vibrates and keeps on this semi-power off state. I know that this was supposed to happen, but now NCS doesn't recognise my phone in *any* way. I can reboot the phone holding vol+, reboot holding nothing, start all over again... Just nothing.
All I want is to debrand my phone to a Nokia firmware (not a TIM one, I really hate those custom boot and apps) and update it to WP7.8, but I also want to work with Zune (sync and updates). Can someone PLEASE help me?
One more thing: when I was reading about all these stuff, I came up with the unlocking bootloader process. It said that I needed to have the Qualcomm boot loader, so I tried to identify it (holding vol+ and plugging USB) and it appeared on my device manager something like Qualcomm MSM blah blah blah. This means that my phone is with Qualcomm bootloaders, right?
Thanks in advance!
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Renan Lazarotto said:
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Click to expand...
Click to collapse
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
*Detection* said:
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
Click to expand...
Click to collapse
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Renan Lazarotto said:
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Click to expand...
Click to collapse
I'd ask one of the devs here, I haven't tried to customise a ROM yet
Just reply to one of the 710 custom ROM threads or PM the dev
first, i would recommend you doing some reading: wp7 chef central
lordmaxey said:
first, i would recommend you doing some reading: wp7 chef central
Click to expand...
Click to collapse
Renan Lazarotto said:
I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet.
Click to expand...
Click to collapse
Already searched, nothing very well detailed...
@ detection
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
What if device manager also dont see the lumia 710.
Like my problem here.
What can i do now?
Bump.
ive click n formated the phone now its not booting up plz help:crying:
Thanks for this wonderful tutorial
Used it to reboot my dead lumia 710
wondering why his post in 2016? Bored and jobless
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
Hello again,
I need your help again and I decided to ask you before I am screwing up my phone again.
I want to install the clockworkmod custom recovery on my phone, but unfortunately I just can not figure out how to install a generic version.
What I did so far:
1.) I installed a custom ROM by simply downloading the coresponding file from needrom... This ROM already contains the superuser settings so this is done
2.) I read a lot about the bootloader, which has to be unloocked at the Lenovo S90... I found a file, which is apparently doing this job... Its a ZIP file called "S90-CN_UnLock_BootLoader.7z" this file contains 6 files: (I) emmc_appsboot.mbn (II) gpt_backup0.bin (III) gpt_main0.bin (IV) patch0.xml (V) prog_emmc_firehose_8916.mbn (VI) rawprogram0.xml
Next I flashed them via the tool QFIL on the phone... Phone restarted and all good
3.) And thats where I get stuck... According to the thread I was following so far for a successful installation of the TWRP recovery I just needed to download the file " TWRP-2.8.6.0_S90.7z" and start the file called "Flash-TWRP_S90.bat"
However, a custom recovery should always start from the beginning, when I keep the up volume button and the power button at once pressed... However, with this it is not working + I would really prefer the clockworkmod as it was nice on my old Samsung.
the "how to" which I followed is coming from "ainotech.com/how-to-flash-lenovo-s90-sisley-root-and-custom-firmware/" just without the "
Thanks
P.S.: The phone is a Lenovo S90-U 2GB
There is something I want to add...
After following the steps of this website, which state above, I installed the custome recovery... Well at least I think so...
If I open the app: "Mobileuncle Tools" there is this option shich states: "Into Recovery Mode"
When I click this button, my phone shuts down and starts in the TWRP recovery. However, I can not access this mode in the convencional way, meaning: 1. Switch phone off 2. Volume up button + Power button...
If I do this or any other combination I do not get into this recovery mode anymore only through the Mobileuncle Tool...
(If I push Volume down + Power I go into flash memory)
Dear Developers,
I have Ainol Numy 3G AX9 P97.
But there is always adds are poping up and tablet using is quite difficult.
We need a custom ROM for it. (MIUI rom or any android custom rom)
We did not find any other ROM for it.
So if you have/know where can I found this then please give me link or if you have then please help me with this ROM.
Thanks in advance.
================================================================================================================================================================================================================================================
We have found one link but not Download links are are working now: 4pda.ru/forum/index.php
After flashing the tablet is not charging, does not turn on the computer is not detected. The solution for such bricks include:
1. Remove the back cover plate.
2. Turning off the power connector.
3. Unpack firmware somewhere on your computer.
4. Turn SP Flash Tool 5.14 and set the path to the file from a folder with MT6582_Android_scatter unpacked firmware (see para. 3)
5. Expose setting Format All + Download and hit Download.
6. Hold down the Volume + pressed connect the USB and wait until the flashing process will start. (The buttons do not go!)
7. As soon as you see a yellow band of interest on the firmware download, you can release the Volume + and wait for the end of the process.
8. After the firmware disable USB, connect the power connector of the battery and turn our device for verification.
9. Put the cover back.
As I said, flashing a site Ainol not work and leads to a brick (3 times sewed, 3 times okirpichil). I solved this problem by replacing preloader.bin of the new version on preloader.bin from the previous version, which is stitched without any problems, and then packed RABOCHUYUYU latest firmware for our tablet did re-initialization of memory + 2GB USRDATA (instead of 1 GB for applications will be allocated 2 GB and there is no fault with the lack of space). Spread the firmware for the members of the forum.
To flash mode Firmware Uprade through SP Flash Tool (for those who okirpichil: see. The instructions above)
Do not forget to make backup NVRAM!
Ainol_AX9_2014.09.05_2GB
Attached file SP_Flash_Tool_v5.1452.00.000.rar (24,67 MB) --> no link
Here CWM recovery for our animal. Put through Mtk Droid Tools.
Download CWM recovery
Attached file MtkDroidTools.rar (9.97 MB)
1. Turn the tablet in debug mode via USB. (Settings for developers)
2. Set the Root rights (Annex Framaroot to help)
3. Start the MTK Droid Tools, connect the USB cable to the plate.
4. Wait for the connection (in the corner of the box should be lit green), and your device must be recognized.
5. Go to the tab root, backup, recovery.
6. click on the button Recovery and Boot.
First, it prompts you to specify the path to the boot.img, but we we press Cancel, and then it asks you to specify the path to recovery.img and we specify the path to my file and hit ok.
7. Turn off the tablet and go in through rekaveri kombanatsiyu On. and Volume +
Attached file recovery.img (5,33 MB)
Please add information to the cap.
Hi.
I wrote problems with my wife's P9000 here: https://forum.xda-developers.com/showpost.php?p=72990392&postcount=14
And yes: no solution works. And either there is no stock recovery or this device can't find them.
I offer 50 Euro for help. My goal: to install custom recovery (most TWRP), install custom ROM (some stable version of Marshmallow) and root it.
I tried about 6 hours and I have had enough.
Except that I will be appreciate.
German? English?
Vielleicht kann ich helfen
One of the official ota p9000 updates has a corrupt recovery. This is why you can't get into the recovery and why the official update fails all the time. (I think).
About the flashing part with sp flashtools. You need to install those mtk drivers with the driver signature turned off in Windows. Otherwise those drivers can not be installed on you pc and flashing your phone can't be done. Just search Google for how to disable driver signature for your Windows version.
About the part of making a scatter file. You do not need to make a scatter file. It is included in Roms that have a scatter file with them (the roms that are ment to be flashed with sp flashtools).
If you want to flash a custom recovery with sp flashtools. You load the scatter file of a stock ROM and make sure, in the download screen of sp flashtools, the location points to the custom recovery .img file. And make sure there is a check mark on the left of the row for the recovery. Otherwise sp flashtools will simply skip that part with flashing.
If you want to install a custom ROM without spflashtool. You need a custom recovery and flash it via the recovery.
I hope I helped you enough. Because this how it works for me every time on every mtk phone (that I owned). I do not want your €50
MoRiA Cheo said:
Hi.
I wrote problems with my wife's P9000 here: https://forum.xda-developers.com/showpost.php?p=72990392&postcount=14
And yes: no solution works. And either there is no stock recovery or this device can't find them.
I offer 50 Euro for help. My goal: to install custom recovery (most TWRP), install custom ROM (some stable version of Marshmallow) and root it.
I tried about 6 hours and I have had enough.
Except that I will be appreciate.
Click to expand...
Click to collapse
Do you have somewhere easier to talk? whatsapp? my whatsapp is +351 910012132 i can help
MasterDK2015 said:
German? English?
Vielleicht kann ich helfen
Click to expand...
Click to collapse
Polish or english. ?
MoRiA Cheo said:
Polish or english. ?
Click to expand...
Click to collapse
Hi, Just a couple of questions.
When did you get the P9000?
What version of Windows?
Things to download
I recommend you install the 20170112 (store on computer)here
Extract the RAR file, it is contained in a folder, no need to extract in a new folder.
Super SU root (store on phone, SD card preferred) here
And TWRP 3.0.2-8 from Jonny (store on computer)here
Go to Device Manager.
View - Show Hidden Devices
If you see MTK Preloader VCOM
or MTK USB Device, that's good. More MTK xxxxx the better.
Open SP Flash Tool
Load the scatter file from the load button. 3rd row down. Go to the Extracted RAR file and select MT6755_Scatter.txt.
Then press the recovery file location name (C: USER ........ recovery.img) and navigate to the
TWRP 3.0.2-8.img and select that.
Now Press the Download (green down arrow) button and then use the stock cable and connect to a USB 2.0 port, then while pressing the volume up button, on the P9000, connect the phone to the other end of the cable.
A Red bar down the bottom saying Download DA 100% should appear and then a yellow bar and some percentage, which will take 5 or so minutes to go all yellow then a big green tick on a pop up should appear and it's done!
Then go to recovery which is Volume Up and Power at the same time untill the ELE logo appears. When it appears release the buttons. Swipe the allow modifications and then press the install button, navigate to the SuperSu.zip by Select storage if you have an SD CARD, otherwise it will probably be in the Download folder. Swipe to install, wipe cache and dalvik, swipe and reboot system. Hope that works any questions just ask. Sincerely, X
Hexyl said:
One of the official ota p9000 updates has a corrupt recovery. This is why you can't get into the recovery and why the official update fails all the time. (I think).
About the flashing part with sp flashtools. You need to install those mtk drivers with the driver signature turned off in Windows. Otherwise those drivers can not be installed on you pc and flashing your phone can't be done. Just search Google for how to disable driver signature for your Windows version.
About the part of making a scatter file. You do not need to make a scatter file. It is included in Roms that have a scatter file with them (the roms that are ment to be flashed with sp flashtools).
If you want to flash a custom recovery with sp flashtools. You load the scatter file of a stock ROM and make sure, in the download screen of sp flashtools, the location points to the custom recovery .img file. And make sure there is a check mark on the left of the row for the recovery. Otherwise sp flashtools will simply skip that part with flashing.
If you want to install a custom ROM without spflashtool. You need a custom recovery and flash it via the recovery.
I hope I helped you enough. Because this how it works for me every time on every mtk phone (that I owned). I do not want your €50
Click to expand...
Click to collapse
Your instructions was very, very good but a little bit general for me. I lost myself in Your shortcuts (device on/off, connected/disconnected). But when I finished, I see You wrote everything.
So thank You very much. You helped me very much, You showed me the instruction I didn't find before.
Ninja X said:
Hi, Just a couple of questions.
When did you get the P9000?
What version of Windows?
Things to download
I recommend you install the 20170112 (store on computer)here
Extract the RAR file, it is contained in a folder, no need to extract in a new folder.
Super SU root (store on phone, SD card preferred) here
And TWRP 3.0.2-8 from Jonny (store on computer)here
Go to Device Manager.
View - Show Hidden Devices
If you see MTK Preloader VCOM
or MTK USB Device, that's good. More MTK xxxxx the better.
Open SP Flash Tool
Load the scatter file from the load button. 3rd row down. Go to the Extracted RAR file and select MT6755_Scatter.txt.
Then press the recovery file location name (C: USER ........ recovery.img) and navigate to the
TWRP 3.0.2-8.img and select that.
Now Press the Download (green down arrow) button and then use the stock cable and connect to a USB 2.0 port, then while pressing the volume up button, on the P9000, connect the phone to the other end of the cable.
A Red bar down the bottom saying Download DA 100% should appear and then a yellow bar and some percentage, which will take 5 or so minutes to go all yellow then a big green tick on a pop up should appear and it's done!
Then go to recovery which is Volume Up and Power at the same time untill the ELE logo appears. When it appears release the buttons. Swipe the allow modifications and then press the install button, navigate to the SuperSu.zip by Select storage if you have an SD CARD, otherwise it will probably be in the Download folder. Swipe to install, wipe cache and dalvik, swipe and reboot system. Hope that works any questions just ask. Sincerely, X
Click to expand...
Click to collapse
You are the NINJA!
Thank You! Thanks to You I installed TWRP. Rest is easier.
You show me to install ANY MTK device and P9000 can be on. And You show me precisely that I should change the destination point for TWRP (so not default but the .img file).
And that was important for me. And thanks to You I did it.
Thank You.
Please write to me in private message Your account number or PayPal.
Thank You again.
MoRiA Cheo said:
You are the NINJA!
Thank You! Thanks to You I installed TWRP. Rest is easier.
You show me to install ANY MTK device and P9000 can be on. And You show me precisely that I should change the destination point for TWRP (so not default but the .img file).
And that was important for me. And thanks to You I did it.
Thank You.
Please write to me in private message Your account number or PayPal.
Thank You again.
Click to expand...
Click to collapse
No problem. I'll PM my PayPal soon. Thanks!