Hi, a month ago I successfully flashed the latest Rainbow ROM on my Lumia 710 using Nokia Lumia Downloader 0.4, now I wanted to restore the DLOAD using NSS .50 but when I press volume+ and connect the USB cable I only see NAND DIsk Drive instead of Nokia USB Connection, using device manager I can see that QUALCOMM is active and I cancel on formatting memory, my device still boots up but I just want DLOAD back...
Can someone please tell me what I need to do to restore the original DLOAD?
thank you
ok got what I wanted by following this guide, but I wonder if it's possible to revert to DLOAD again...
http://forum.xda-developers.com/showpost.php?p=29635343&postcount=4
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM (http://forum.xda-developers.com/showthread.php?t=1665821) as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
Click to expand...
Click to collapse
this works for me: http://forum.xda-developers.com/showthread.php?t=1702815
Related
1) goto seidea[dot]com and start off by downloading the Nokia Care Suit and Data Package Manager.
2) After installation of both also install the WinUSB driver from C:\Program Files\Nokia\Nokia Care Suite\Drivers or C:\Program Files(x86)\Nokia\Nokia Care Suite\Drivers
3) Connect your phone with the Nokia Support Tool for Store open, this programme will have a launcher in the main Nokia Care Suite, and should have detected your phone, disconnect cable, this might restart your phone, this is normal.
4) Next fire up the Data Package Manager and search for RM-801 in product type, this will return a bunch of different variations of the firmware. Lookup the RM-801 Everything Everywhere GB rom which has the Product Code as 059Q201 and SW Version 1750.0805.8773.12220
5) After download fire up the Nokia Support Tool for Store, change it to offline mode at bottom right, or simply disconnect from the Internet,from the file menu, select Open Product and select product RM-801
6) From the bottom left pane, select Programming and then Recovery and select the new firmware you just finished downloading.
7) Flashing should take 5-7 minutes and leave the phone un-attended. Voila
Again I take no responsibility for any dammage to your phone, and you may download and flash any firmware from the entire list under RM-801 should not be a problem.
Additionally you may also want to take a backup from WP7 Easy Backup, google it or search the forums for it.
Also if you are stuck in airplane mode, goto settings>about>reset your phone. it will reset your phone and switch off the airplane mode
regards
Prateek
Hello,
Thanks for this post, really helpful.
I have two questions:
1) is it an update or is it going to reset my phone (i.e. erased apps and data)?
2) at step 6 I have a problem: when I press start in the recovery Window, it displays for a few minutes a "check mode" status and after I got a window with instructions (pluging the usb cable while pressing the up volume button) but it's not working ?!
Matthieu
tewmgd said:
Hello,
Thanks for this post, really helpful.
I have two questions:
1) is it an update or is it going to reset my phone (i.e. erased apps and data)?
2) at step 6 I have a problem: when I press start in the recovery Window, it displays for a few minutes a "check mode" status and after I got a window with instructions (pluging the usb cable while pressing the up volume button) but it's not working ?!
Matthieu
Click to expand...
Click to collapse
It will clean everything, its not an update but a flash with fresh firmware technically.
Has your phone been detected by the Nokia Support Tool for Store as in Step 3?? and have you done the File->Open Product>rm-801 ??
Yes, everything is working as mentioned in your post until the flashing step where it seems that my device is not in the "right" mode.
My phone kicked into the required mode automatically, did not have to do anything, there is a mode by which u press the vol up and power button and connect the cable, the phone vibrates and is detected by the computer
Am I right that this ROM is for all the UnBranded and SIM Unlock Lumia 800?
So, Lumia 800 from Singapore/Malaysia shouldn't have problem to flash this ROM?
shawchyn said:
Am I right that this ROM is for all the UnBranded and SIM Unlock Lumia 800?
So, Lumia 800 from Singapore/Malaysia shouldn't have problem to flash this ROM?
Click to expand...
Click to collapse
If factory unlocked, this rom should not have a problem, because I am in India and I downloaded the same ROM and it worked, it might bootup in airplane mode, goto settings about and reset the phone, it will reset with the airplane mode off..
tewmgd said:
Yes, everything is working as mentioned in your post until the flashing step where it seems that my device is not in the "right" mode.
Click to expand...
Click to collapse
If You have a code on Your lockscreen then disable the code. If You cant due to policy from Outlook, then delete the Outlook account
Sent from my Lumia 800 using Board Express
Hey guys,
Basically ive installed LumiaTrix on my Nokia Lumia 710. I just want to get rid of it and install stock rom. I have a qualcomm bootloader. Could someone please tell me how to do this step by step. As ive not seen a post which tells you how to flash back to stock rom or update to a stock rom.
Also done anyone know how to get facebook push notifications working. i have enabled it in facebook app itself but no notifications come through.
thanks
I can help
Hello I can help you to install the stock rom. Do you want?
I need some help too...
Can a stock rom be installed on Qualcomm bootloader?
If I need to go back to DLOAD, Is there a "ease" guide?
Thnks
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
Thanks!!! it is the same procedure than for unlocked roms.
If I install a stock rom (with Qualcomm bootloader) can I upgrade the phone with Zune?
lrhage said:
Thanks!!! it is the same procedure than for unlocked roms.
If I install a stock rom (with Qualcomm bootloader) can I upgrade the phone with Zune?
Click to expand...
Click to collapse
I'm not 2 sure about Upgrade with Zune but I don't no why it would be a problem
Even if for some reason you couldn't you could send the updates via cab sender
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
I have done all the steps but i have one problem...
WHen is the time to flash the rom from nokia care suit or download manager , my mobile cannot recognised from the computer , it says Qualcomm CDMA technologies MSM cannot recoginsed...So without connection to to the pc i cannot flash the rom ...Do u have any advice...
After installing the qualcomm drivers nokia care suit recognised my mobile (Nokia lumia 800) but now when i press start recovery its says that it lost connection with my mobile again....!!!
flashed the content in image1 on last ROM flash
kingcartwright said:
To revert to stock rom via Qualcomm bootloader:
1. download the stockrom you want via navifrim
2. once dowloaded open *_boot.esco file as zip archive (the largest file) and extract
3. rename boot.img to os-new.nb (can be what ever you want as long as .nb) (also make sure you've unticked the "hide extensions for know file types" in control panel,folder options,view)
4. then flash via Nokia Lumia 710 downloader —— One key tool for flashing custom ROM as you would any custom rom.
and don't forget to do a battery pull after flashing and then
i) Press and hold the Volume Down, Power and Camera buttons at the same time.
ii) When the phone vibrates release the Power button but keep the Camera and Volume Down buttons held until Nokia logo appears
and Voilà.
props go to "lucifer3006" for helping me in the firstplace
Click to expand...
Click to collapse
I flashed the 2 files in image1 folder
AMSS and EMMCBOOT for the custom ROM below
http://forum.xda-developers.com/showthread.php?t=1654415,
can i still revert back to the stock ROM?
When i flash stock ROM, after flashing stock ROM i stuck at NOKIA logo
Hello guys!
Let me tell you a story...
I bought an Lumia 710 a few days ago and now I want do debrand it and update it to Windows Phone 7.8. I've followed every single tutorial I could find on the internet, starting from debranding to unlocking bootloader and jailbreaking it. Didn't tried everyone in fear of messing the phone up.
I ended up on Nokia Care Suite with a few firmware files and a very huge desire to update my phone. The matter is that, as soon as I connect my phone to start the flashing process on NCS, it reboots (the phone), vibrates and keeps on this semi-power off state. I know that this was supposed to happen, but now NCS doesn't recognise my phone in *any* way. I can reboot the phone holding vol+, reboot holding nothing, start all over again... Just nothing.
All I want is to debrand my phone to a Nokia firmware (not a TIM one, I really hate those custom boot and apps) and update it to WP7.8, but I also want to work with Zune (sync and updates). Can someone PLEASE help me?
One more thing: when I was reading about all these stuff, I came up with the unlocking bootloader process. It said that I needed to have the Qualcomm boot loader, so I tried to identify it (holding vol+ and plugging USB) and it appeared on my device manager something like Qualcomm MSM blah blah blah. This means that my phone is with Qualcomm bootloaders, right?
Thanks in advance!
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Renan Lazarotto said:
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Click to expand...
Click to collapse
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
*Detection* said:
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
Click to expand...
Click to collapse
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Renan Lazarotto said:
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Click to expand...
Click to collapse
I'd ask one of the devs here, I haven't tried to customise a ROM yet
Just reply to one of the 710 custom ROM threads or PM the dev
first, i would recommend you doing some reading: wp7 chef central
lordmaxey said:
first, i would recommend you doing some reading: wp7 chef central
Click to expand...
Click to collapse
Renan Lazarotto said:
I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet.
Click to expand...
Click to collapse
Already searched, nothing very well detailed...
@ detection
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
What if device manager also dont see the lumia 710.
Like my problem here.
What can i do now?
Bump.
ive click n formated the phone now its not booting up plz help:crying:
Thanks for this wonderful tutorial
Used it to reboot my dead lumia 710
wondering why his post in 2016? Bored and jobless
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
Dear Developers,
I have Ainol Numy 3G AX9 P97.
But there is always adds are poping up and tablet using is quite difficult.
We need a custom ROM for it. (MIUI rom or any android custom rom)
We did not find any other ROM for it.
So if you have/know where can I found this then please give me link or if you have then please help me with this ROM.
Thanks in advance.
================================================================================================================================================================================================================================================
We have found one link but not Download links are are working now: 4pda.ru/forum/index.php
After flashing the tablet is not charging, does not turn on the computer is not detected. The solution for such bricks include:
1. Remove the back cover plate.
2. Turning off the power connector.
3. Unpack firmware somewhere on your computer.
4. Turn SP Flash Tool 5.14 and set the path to the file from a folder with MT6582_Android_scatter unpacked firmware (see para. 3)
5. Expose setting Format All + Download and hit Download.
6. Hold down the Volume + pressed connect the USB and wait until the flashing process will start. (The buttons do not go!)
7. As soon as you see a yellow band of interest on the firmware download, you can release the Volume + and wait for the end of the process.
8. After the firmware disable USB, connect the power connector of the battery and turn our device for verification.
9. Put the cover back.
As I said, flashing a site Ainol not work and leads to a brick (3 times sewed, 3 times okirpichil). I solved this problem by replacing preloader.bin of the new version on preloader.bin from the previous version, which is stitched without any problems, and then packed RABOCHUYUYU latest firmware for our tablet did re-initialization of memory + 2GB USRDATA (instead of 1 GB for applications will be allocated 2 GB and there is no fault with the lack of space). Spread the firmware for the members of the forum.
To flash mode Firmware Uprade through SP Flash Tool (for those who okirpichil: see. The instructions above)
Do not forget to make backup NVRAM!
Ainol_AX9_2014.09.05_2GB
Attached file SP_Flash_Tool_v5.1452.00.000.rar (24,67 MB) --> no link
Here CWM recovery for our animal. Put through Mtk Droid Tools.
Download CWM recovery
Attached file MtkDroidTools.rar (9.97 MB)
1. Turn the tablet in debug mode via USB. (Settings for developers)
2. Set the Root rights (Annex Framaroot to help)
3. Start the MTK Droid Tools, connect the USB cable to the plate.
4. Wait for the connection (in the corner of the box should be lit green), and your device must be recognized.
5. Go to the tab root, backup, recovery.
6. click on the button Recovery and Boot.
First, it prompts you to specify the path to the boot.img, but we we press Cancel, and then it asks you to specify the path to recovery.img and we specify the path to my file and hit ok.
7. Turn off the tablet and go in through rekaveri kombanatsiyu On. and Volume +
Attached file recovery.img (5,33 MB)
Please add information to the cap.
After seeing SO many frustrated people asking how to do this and never really getting a good answer, i decided to make a useful and easy guide.
Things you need
ADB drivers installed and working
Lenovo usb driver
MTK driver
(Windows will most likely install Lenovo and MTK drivers by itself, if not, search google for ''MTK Drivers'' and Lenovo ''USB drivers'', download and install.
Go To Needrom and download both AP and CU official roms
Same place find a TWRP recovery under one of the X2 roms
SP Flash tool (again, Google it) download and install
If any of these things make you think *Whaaat?* then do some more reading, before continuing!
And on with it!
Attention
Save everything you have on your phone you dont what to have deleted, because it will disappear!
Extract both of the Roms you downloaded previously, and for convenience put them side-by-side on your desktop.
Make sure your phone is adaquetly charged everything above ~60%
Turn your phone off and DONT choose ''fast boot up''
Make sure the phone is not plugged in the computer just yet
Open up SP Flashtool
At the top, press options -> option -> download, check both boxes.
Close the option window again
Leave the ''download agent'' be! It should look like this C:\where you installed\SP_Flash_Tool_v5.1524.00.000\MTK_AllInOne_DA.bin
Now press the button that says ''scatter loading'' And navigate to your desktop where we extracted the ROMS earlier and into the AP ROM folder from there choose ''Target_bin'' and then ''MT6595_Android_scatter.txt''
Example of How it should look like:
C:\Users\Yourname\Desktop\X2-AP_ROW_S130_150412\target_bin\MT6595_Android_scatter.txt
Critical!Make sure the next drop down menu says ''Firmware Upgrade'' if you choose ''Format all + download'' you lose you IMEI and MAC Address, if that happens prepare yourself for looong nights of google'ng :laugh:
Now we're ready to flash!
Press the big Download button with the green arrow and plug your (turned off) phone into you PC (IN THAT SPECIFIC ORDER, YES!), with some luck and driver cooperation it all works
SP flashtool should now begin to burn the new ROM to your phone, and it will take awhile so be patient.
if nothings happens at all make sure your phone was completely turned off without choosing ''Fast Bootup'' and that you installed your drivers correctly.
When The Flashing is done SP flashtool will display a ''Download OK'' or similar
After that just close all SP Flashtool windows completely and unplug your phone
Boot it up to check that its working, if not you did something wrong, try again.
Congratulations! Now you hopefully have a ROW ROM on your your phone!
Unfortunately Your Radio dosen't work, that's because the Chinese phones have a different Modem then the ROW versions.
So lets fix that!:good:
Open up SP Flashtool again
make sure the boxes in options -> option is still checked!
Press the scatter loading button again
but this time navigate to to place where you downloaded and extracted your TWRP recovery folder.
In this folder there is also Scatter loading file, choose that
notice that the only thing checked now is the recovery box
Again make sure the drop down menu says ''Firmware upgrade''"!
Now same procedure as last time, with turned off phone, press the download button and connect phone
SP Flashtool will flash the Recovery files and ultimately say ''Download OK''
Close the window and unlug phone.
Now press the power button and both volume buttons at once, when the phones vibrates and/or when the lenovo logo shows release the power button but not the volume buttons
when the recovery screen appears release at will :silly:
Now plug in your phone and navigate to your phones internal storage then to ''Download'' folder
Now from the CU Version ROM you previously downloaded navigate to:
\modemdb\mt6595k95_hspa_lwg_cu
the two files called ''catcher_filter_1_lwg_n'' and ''modem_1_lwg_n'' are our modem files.
Now move these two files to the ''download'' folder in your phones internal storage.
When done unplug the phone again and continue from TWRP
Mount -> ''Check all'' -> ''press back button''
''Advanced'' -> ''File manager'' -> sdcard -> Download -> ''click on one of the files you put there'' -> ''Move'' -> system -> etc -> firmware -> ''select'' -> ''swipe to confirm''
Now do that for the last file to, now you dont have to navigate to the ''firmware'' folder as when you press move on the next file it should be there already, so just press select.
now go back to the file manger and navigate to the ''firmware'' folder find both files you put there and select them then press ''CHMOD 755'' this tells ROOT that you have permissions to Read and Write them.
After that go all the way back and press Reboot -> system,
The recovery will then ask if you want to ROOT it, DONT Root IT! if you do the phone wont Boot!
Wait for the start up and enjoy your working phone!
If the phone tells you there is a update for it, dont install it the conventional way, as TWRP can't install the updates that way.
and if you flash Stock recovery and then update, your phone will update just fine but you'll have to move the modem files again, since the update checks the phone and sees something is wrong (the CU modem files dosen't match the checksum)
and will overwrite our CU modem files.
There's probably a lot of typos in this, bear with me, its late at night.
Disclaimer: If you dont know what your'e doing, then dont do it...
Made by Mikkel jacobsen
This is for the X2Pt5?
Thanks!
Very useful post.I've had a X2 with CU older version modified from Needrom but wasn't satisfied.
This one seems allright.
Thanks.
L.e. Still i have a problem with the radio thing.
In fact you make a mistake. Instead of ''Firmware upgrade''you must select ''Download only'' on flash tool at radio fix otherwise it will brick the phone.