I try to add the settings for orange.fr:
Code:
APN : orange or orange.fr
Username : orange
Password : orange
MCC : 208
MNC : 01
APN Type : default
but when I press "save", it just doesn't save.
I found it disappears when I add the MCC value, very strange.
I looked at http://forum.xda-developers.com/showthread.php?t=1632975 but that didn't seem to work for me.
Any ideas?
TIA
Related
I've installed GingerBlur 2 tonight and for some reason I couldn't connect to the internet. I found out that my list of APNs has been wiped out. Is there an xml file I can use to restore them via APN Manager or something similar?
Much appreciated.
I am also facing the same thing....please some one help us....
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Dr.Jeckyl said:
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Click to expand...
Click to collapse
Thanks a lot...i added new APN by following the settings mentioned over there....it worked for me and my internet is working.
For convenience i will mention the steps that i followed:
Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names.
Press ‘Menu’ and select ‘New APN’.
Enter these APN settings:
Name: AT&T
APN: wap.cingular
Proxy: <leave empty>
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: <leave empty>
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication Type: <leave empty>
APN Type: <leave empty>
More help:
http://forum.xda-developers.com/showthread.php?p=13273515#post13273515
the rundown...
flashed froyoman for the ideos onto the m835. booted fine but no web. used metroff for froyo, but no dice.
reflashed recovery but web was still gone
manually input apn's but wouldn't save settings. BUT as settings were input, web sig. started working until I tried to save when they erased.
these are the exact settings i need which came off my mom's m835 AND in the data/data/com.android.providers.telephony/databases/telephony.db/carriers folder
name:MetroPCS
APN: #777
proxy: proxy.metropcs.net
port: 3128
username: yourphonenumber at aaaj dot mymetropcs dot com
password: 699160
mmsc: h t t p : / mms dot metropcs dot net : 3128 slash mmsc
mcc: 311
mnc: 660
type: PAP or CHAP
apn type : *(astrix)
is it possible to push these in through adb and if so how?
I have access to another m835 that's not rooted, but i'll root it if i have to in order to gain access to all critical read only files...
oh and my build.prop says
"#begin volatile config
#end volatile config"
then switches between eclair and froyo after the #
that's not good is it? keep in mind that I'm nu to this and I'm going off a general hunch...
hi,
i have hcl me tablet u1 running android 4.0.3 ics and tried to connect to internet through 3g dongle i used HUAWEI e173 from operator etisalat egypt
when i connect it to the tablet there is nothing changed with the signal indicator and tried to put settings to the apn like that :
HTML:
1. Open Menu Settings Wireless controls Network
Mobile Networks Access Point Names
2. Press Menu New APN
3. Fill your parameters as shown below:
Name: Etisalat
APN: etisalat
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://10.71.131.7:38090
MMS Proxy: 10.71.130.29
MMS Port: 8080
MCC:
MNC:
APN Type: Internet
4. Press Menu, and then Save
5. Press Tick, next to etisalat to make it active
6. Press Back to return to the "Mobile network settings" screen
7. Probably optional: Select "Use only 2G networks
that was givin in this topic and there is nothing happen
please show me ho to make it work
and forgive me for my english
hi there
hi,
any help please??!!!!
i found these page " android pipip de/umts_howto php " ( change spaces with dots)
is this suitable for me or there is another good method . I'm new to the android world and don't no what to do
still no answer
any body plz
Ok. This is a weird one for me. I bought a EVO 3D off of Ebay with a bad ESN. I didn't care about the ESN since I was going to flash it over to Page Plus anyways. So, I flashed it and got everything running for it...except MMS. Talk, Text, & 3G works fine. I tried creating a default APN settings using giffgaffAPN since I couldn't get to the APN settings by going to Menu-Settings-Mobile Networks (option wasn't there). I put in what I found online as the default settings for the new APN. The APN didn't show up in the list but I didn't see the old APN either so I took it for granted that all was right in the world. I tried downloading a pic I'd received earlier via MMS and still nothing. I was still able to surf on 3G still. Can someone tell me what I'm doing wrong? Thanks!
OS: Android 4.03
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
mnomaanw said:
Dial ##3282# on your dialer and tap edit mode then enter your msl / spc. Then go to advanced. At the bottom you will have the settings option.
On some roms you can directly change mms setting from the message app>settings
EDIT : I see you edited it yourself.
Click to expand...
Click to collapse
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
whodatdoug said:
Thanks for the help! I'm the right place but not all of the options that I need or in the settings. I need to put the following in but username and password or missing. I went ahead and put in all of the info that was available but the MMS still wouldn't work.
Verizon APN settings Android:
Name : Verizon
APN : Verizon or vzwinternet
Proxy : null
Port : null
Username : Mobile [email protected]
Password: vzw
Server :
MMSC : http://mms.vtext.com/servlets/mms
MMS Proxy : null
MMS Port : null
MCC : 310
MNC : 012
Authentication type : Not Set
APN : Not Set
Note: I just found username under data profile but no place to enter in password, MCC, or MNC.
Click to expand...
Click to collapse
I think I just figured out a step that I needed to put in. There's a field that says MMS Server URL that's just inside of the advanced menu that's a header like MMSC Setting. I put the MMSC URL into that field and I received those MMS messages that were previously just download. I need to try sending MMS messages now but unfortunately, last night, my SD card failed. I lost 16 gigs of pics (about 3k pics) and movies...including pics of the first time I held my son. Fortunately, most of those are on FB.
Thanks again for all of your help. Hopefully, when I get the new SD card in from IceMonkey.com ( Here's the one I'm getting and there's no referral link so I shouldn't get dinged for this ) and get some of the pics redownloaded, I can test out the send function on MMS.
I have been attempting to access my tethering functionality on my rooted S3 (SGH-I747) for a few days now without success. I tried this process because it sounded promising but unfortunately I am unable to access settings.db using the SQLite Editor app.
When I click on the file the following error appears: An error occurred while opening the database. unable to open database file (code 14):, while compiling: SELECT * FROM sqlite_master WHERE type in('table','view') ORDER BY name.
I was thinking I might not be properly rooted but I verified my root status with the root checking apps. They confirm I'm rooted.
I'm running the stock Samsung ROM.
My APN settings are (I use Straight Talk as a provider):
NAME STRAIGHT_TALK
APN tfdata
MMSC http://mms-tf.net
MMS PROXY mms3.tracfone.com
MMS PORT 80
MMS_APN tfdata
MCC 310
MNC 410
Authentication type Not set
APN type Not set
APN protocol IPv4
APN roaming protocol IPv4
Turn APN on/off APN turned on
Bearer unspecified
Mobile virtual network operator none
I've tried other apps such as WiFi Tether for root users and WiFi Tether Router with no luck.
This is the thread I was following: http://forum.xda-developers.com/showthread.php?t=2544487
Does anyone have any idea of why I can't access settings.db?