I just got a used, white HTC EVO 3D off of eBay, and it already been rooted and flashed with a custom ROM (no s-off though, as its hboot 1.5).
I flashed clockworkmod using the fastboot method, but it never goes into recovery. The Rom boots fine, its just when it goes into recovery, I get the white HTC screen, and then it reboots and goes into android. I've turned off fast boot in the settings, so I'm not sure what the issue is.
Sent from my PG86100 using xda app-developers app
thomasca said:
I just got a used, white HTC EVO 3D off of eBay, and it already been rooted and flashed with a custom ROM (no s-off though, as its hboot 1.5).
I flashed clockworkmod using the fastboot method, but it never goes into recovery. The Rom boots fine, its just when it goes into recovery, I get the white HTC screen, and then it reboots and goes into android. I've turned off fast boot in the settings, so I'm not sure what the issue is.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
If you pull the battery and put it back, then go to hboot and select recovery and it doesn't go to recovery, then your recovery is corrupt or something, no biggie. Get flash image GUI and flash a recovery with it, or flash cwm with rom manager.
I used to have issues with certain recoveries when I had s-on, I think cwm version 4.0.1.4 was the one that worked for me.
Have you tried 4ext recovery? Link is in my Sig.
Well I have ROM manager and tried cwm 4.1.0.15 and got the same results.
Would 4ext work with any of the ics roms for the HTC EVO 3d?
Sent from my PG86100 using xda app-developers app
Yes it will. I use 4ext and am running ZREDX ICS.
Alright, that worked. Thanks for the help!
Sent from my PG86100 using xda app-developers app
Related
HI. I have a big problem... I tried flashing an OTA file with CWM recovery, and now I get to the HTC white screen with no Quitely brillant below
My hboot is unlocked and I am s-on
I could probable y access fastboot, though I cannot tell right now I cannot use it on the computer I have, but if I access fastboot I have the regular options, and the buttons works. if I choose recovey , I see a android CWM and a small bue progress bar and it reboots back to "Normal" wich is being the white HTC screen right now
I am able to access Hboot which makes me think that I can probably get out of this by flashing back my original RUU.
Pleasae tell me that i am right:
I thought of trying a factory reste to start with , but I am not sure this will work because of the recovery I installed.
My hboot is unlocked.
is it bad Doctor?:crying:
try flashing the stock recovery, then flash the ruu again.
it seems to be leading to something like this ... I'll try
And it worked!!!
I was able to relock the hboot prior to running videotron Ruu executable file. This worked like a charm... I have learned my lesson. I'll wait for my turn to be pushed. Thank you all.
Sent from my Now restored HTC Amaze 4G using xda app-developers app.
Flynch3211 said:
And it worked!!!
I was able to relock the hboot prior to running videotron Ruu executable file. This worked like a charm... I have learned my lesson. I'll wait for my turn to be pushed. Thank you all.
Sent from my Now restored HTC Amaze 4G using xda app-developers app.
Click to expand...
Click to collapse
Good to hear it worked
Would'it worked if I would've left the boot loader unlocked??
Sent from my HTC Amaze 4G using xda app-developers app
Flynch3211 said:
Would'it worked if I would've left the boot loader unlocked??
Sent from my HTC Amaze 4G using xda app-developers app
Click to expand...
Click to collapse
no, the bootloader needs to be locked to flash any ruu file
Dude flash stock recovery relock boot loader then flash the RUU most recent one. And if your gonna unlock boot again and flash another custom recovery us 4ext its the best one in my opinion a lot of options very simple nice user interface no troubles as of yet. Plus it basically like having S-Off cause of smart flash it flashes kernels together with rom. Its 3.00$ on market or you can get it for free from internet or other apps. If anything feel free to pm me
Sent from my HTC Ruby using xda app-developers app
Thanks, but right nowi'm kind of being chicken. Anyway, the OTA file came in anyway, by regular means, so my goal has been acheived.. but I'll chek it out eventually.
Sent from my HTC Amaze 4G using xda app-developers app
So earlier today I tried flashing the latest nightly of CM10 (12/3) onto my phone using FlashImageGUI, and, for some reason, instead of booting into the recovery which I tried through the power menu, it wouldn't go into recovery and just kept going into my boot loader, so I decided to reboot and was back into the phone. Now I'm trying to turn it off so I can go to bed and it just keep rebooting into the boot loader. I believe I'm TWRP 2.2.2.0 and I'm S-ON
Anyone have a solution to this? Also I'd just like to figure out why this won't flash through FlashImageGUI
Sent from my EVO using xda app-developers app
I would just fastboot flash twrp 2.3.1.0 IMG
Do a full wipe. And start over with cm Maybe redownload it also
Check out dirtyracoon and get the evo soff. Its very easy to run soff means no fastboot or flash image GUI for kernels
Sent from a lens flare powered EVO LTE
Well I had it on TWRP 2.3.0.1 and it was always doing the same thing so it may be the ROM, unless this phone is getting messed up
Sent from my EVO using xda app-developers app
When i am in twrp the touch screen doesnt work. So i try to flash using the bootloader with pj75img and after it it loads then reboots the phone nothing is happening. can anyone help?
NOTE TO ALL USERS: WHEN POSTING QUESTIONS ABOUT WHY YOUR DEVICE IS ACTING UP DUE TO A CERTAIN ROM, RECOVERY, ETC... YOU WILL NEED TO POST INFORMATION ABOUT YOUR DEVICE. THERE'S NO WAY WE CAN JUST GIVE YOU AN ANSWER WITHOUT KNOWING WHAT YOU HAVE. EXAMPLE: HBOOT, BASEBAND, ROOT, S-ON/S-OFF, ROM, ETC...
Pr0Ducer said:
When i am in twrp the touch screen doesnt work. So i try to flash using the bootloader with pj75img and after it it loads then reboots the phone nothing is happening. can anyone help?
Click to expand...
Click to collapse
With the limited amount of information you provided I have to assume you are on the latest firmware with the latest touchpanel and are flashing a version of TWRP that doesn't support that particular touchpanel. You will need to flash a later version of TWRP (2.4.4.0+) in order to use the touchscreen with the latest touchpanel firmware. In most cases: when first flashing TWRP and booting into the recovery the phone will reboot the system and you will then need to get into the bootloader and maneuver to the recovery again.
I have twrp 2.2.0, and and a basband form when i first got the phone which was last September, and have not done an update since then. Being a newb and not paying attention i installed the newest hatk rom and after that it flashed that one rom but every zip after that after flashing didnt do anything and now my touchscreen does not work when i am in recovey. So all i can think of is to bootload flash back but nothing works. it will flash after the phone reboots nothing has changed. Where do i go from here?
If this helps at all.
Jewel pvt s-pff RL
CID-SPCS_001
HBOOT-1.12.1111
Radio-1.12.11.1210
openDSP-v31.1.0.45.0815
Try flashing TWRP 2.4. or newer and see if that fixes the problem.
Sent from my EVO using xda premium
Did you install the latest firmware and touch? Maybe that's the problem.
If you don't want to mess with that, you could install cwm. Works with the volume keys and power button. If the touchscreen works with the ROM but not recovery, try a newer recovery (latest twrp, maybe?).
Sent from my Evo 4G LTE using xda premium
When I go to flash with the bootlader. It will load but no changes after I reboot.
Sent from my EVO using xda app-developers app
And yes I have tried to flash the new twrp. I'm just stuck with no touch screen in recovery. And buttons don't work either. Is there another way I can flash other than using the bootlader.?
Sent from my EVO using xda app-developers app
Pr0Ducer said:
And yes I have tried to flash the new twrp. I'm just stuck with no touch screen in recovery. And buttons don't work either. Is there another way I can flash other than using the bootlader.?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Need to use fastboot, images, or FlashGUI. Try TWRP 2.3. If you have no touch input with any recovery or ROM then you're going to need a new phone.
Sent from my EVO using xda app-developers app
Dont you need TWRP 2.4+ if you have the 3.16 ouch panel?
Sent from my EVO using xda premium
scottspa74 said:
Dont you need TWRP 2.4+ if you have the 3.16 ouch panel?
Sent from my EVO using xda premium
Click to expand...
Click to collapse
2.3.3.0+ I thought. Otherwise 2.4+. Can't remember for sure but I used 2.4.4.0 when I got my replacement with all of the updates. I'm thinking I'm mixing those version numbers up a bit. Lol.
Sent from my EVO using xda app-developers app
Haha I see I typo'd and wrote ouch panel. Lol. Ouch panel is more appropriate dealing with 3.16
Sent from my EVO using xda premium
Hello,
I am stuck in a constant boot loop with every rom I flash. I am able to get into the stock restore menu (volume down + power) and from there boot into TWRP 1.1.1. Flashing JmzStock_VM_Shooter_Odex doesn't work as well as any custom roms. Also, RUU doesnt work either, it gets stuck on the HTC logo (silver with blackground) but the RUU fails. It just says unknown error.
It is Unlocked (or at least thats what it says in pink in ShooterXC) and is says S-ON.
Any help would be so lovely!!
You won't be able to run the ruu unless you get s off.
Are you wiping system and boot before you flash?
You may want to try flashing a boot img through fastboot
Sent from my Evo V 4G using xda app-developers app
Flashing the boot.img from your currently installed ROM fixes 90% of bootloops. It is definitely the way to fix.
Sent from my Evo 3D CDMA using Tapatalk 2
hossman said:
You won't be able to run the ruu unless you get s off.
Are you wiping system and boot before you flash?
You may want to try flashing a boot img through fastboot
Sent from my Evo V 4G using xda app-developers app
Click to expand...
Click to collapse
Is there a different way to get S-Off without booting into the OS? I've only seen the wire trick work when they have USB debugging on.
UnforgivenRevival said:
Flashing the boot.img from your currently installed ROM fixes 90% of bootloops. It is definitely the way to fix.
Sent from my Evo 3D CDMA using Tapatalk 2
Click to expand...
Click to collapse
How would I flash it, through recovery and "install" it or using fastboot?
I am running my HTC Evo 3D 4G (Virgin Mobile) with H-BOOT - 1.58.0000 with S-ON.
I started with TWRP 2.0 and began flashing ROM's that looked appealing. I settled on SENSELESS 1.7
I realized then that my 4g and WiFi were disabled. Upon further research learned that I had to S-OFF my phone. In order to do so, I had to return to the sock ICS ROM for my phone. Once I found it and loaded it on my SD card, I tried to flash it using TWRP. It gave me a "unable to load sideload/package.zip" or something to that affect (It has been a while). I hopped back on the forums and learned that my recovery image was failing. Unfortunately, the only way I knew how to flash a recovery ROM was using fastboot. Which SENSELESS does not facilitate.
After much hardship and tribulation. I managed to flash a ROM (D3rpICS-inbREDed-5.5) with sense and by extension, fastboot. I promptly flashed CWM (Clockwork MOD) v5.0.2.0 and tried to boot into recovery. It gave me the HTC start up splash screen, then reboot again, but started up normally. I cannot get it to boot in recover. Not even through adb.
Currently, I am running:
Android 4.0.3
Sense 3.6
inbREDed 5.5
H-BOOT 1.58
S-ON
How can I regain access to my recovery?! Any Help would be appreciated.
Make sure you turn off fastboot in your power settings. If that does not work try reflashing a recovery. 4ext is recommended for the 3d/evo v.
Sent from my PC36100 using xda app-developers app
jlmancuso said:
Make sure you turn off fastboot in your power settings. If that does not work try reflashing a recovery. 4ext is recommended for the 3d/evo v.
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
THANK YOU SO MUCH! My phone is back to full functionality! 4ext and some more fancy adb work and all is well! Thank you good sir. You are both a gentlemen and a scholar!
bgud23 said:
THANK YOU SO MUCH! My phone is back to full functionality! 4ext and some more fancy adb work and all is well! Thank you good sir. You are both a gentlemen and a scholar!
Click to expand...
Click to collapse
That is what we are here for. To help and be helped.
Sent from my PG86100 using xda app-developers app