Related
Hi all! My friend´ve a Hero and after radio update the phohe has bricked. See this video:
http://www.youtube.com/watch?v=R5ihQU7DoDU
How to fix this?
Thanks.
Nobody know?
It´s such!
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Lord Lucan said:
Someone may be able to help you if you give us generous details. ie which radio rom did you intend to flash?
Click to expand...
Click to collapse
Radio: 6.35.09.26
ROM: Modaco-3.1
Recovery: RAV-hero-v1.5.3.1
Thanks for u support.
Have you tried turning it on while the charger is plugged in?
Lennyuk said:
Have you tried turning it on while the charger is plugged in?
Click to expand...
Click to collapse
Yeah, but charger don´t works on flash image and the battery is fully!
:S
Thanks.
And you have tried to go back into the recovery?
Lennyuk said:
And you have tried to go back into the recovery?
Click to expand...
Click to collapse
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
fabioccoelho said:
Recovery and fastboot don´t work. The video show this.
It´s hard solved
Thanks.
Click to expand...
Click to collapse
Try turning it on with the power button and the second you see any life hold down home.
I don't think this will work but it might be worth a try.
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
bonesy said:
its already in recovery,you have adb debugging enabled before update?
Try this in a CMD Window..
adb devices
if it works you could be ok
Click to expand...
Click to collapse
Yeah, adb debug is check! But, i can´t access fastboot or recovery mode.
Thanks.
copy ra_hero recovery onto the root of your sdcard
then...
adb shell flash_image recovery recovery-RA-hero-v1.5.3.1.img
oradb shell flash_image recovery-RA-hero-v1.5.3.1.img
I cant remember which soryy, but one should work!
device not found
Hi! I am in the same s..t so I tried it all
some people managed to do this and get it working again :
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image! Yay!
MINE IS EXACTLY LIKE THE YOUTUBE VIDEO and it didn't!
Any other sugestions?
[email protected]
yea i think u have different problems,his goes to recovery.yours is doing the same as my Sapphire which is being collected by HTC tomorrow for repair pressing HOME+POWER will not get to fastboot! it will take you too recovery
and finaly the FIX
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Thanks for all answers. But only kind to solved this is with JTAG to Motherboard.
Thanks!
same issue here
Hi everyone
I've got the same problem showed in that video. Could you guys help me out? Is JTAG the only way? My mobile simply can't be recognize on Windows and ADB just doesn't list the device...
I've tried every key button combination, but all I got is that Out of the Box image (seems like it's the background of the recovery mode or smthg)
I got my phone charged from USB (from my notebook) but windows doesn't recognize it, even if I dloaded the drivers for it.
Any suggestion would be of great help
Thx a bunch
TAG
same issu here
MESCU said:
finally some one knew how to fix my HERO!
a guy with a lot of electronics knowledge and a device that connected directly to the matherbord and wiped the rom and rewrote it!
rom gets stock if you are smart enough to flush it with the wrong update (CMDA ta a GSM phone)!
so that's the only solution for this kind of situations!
Click to expand...
Click to collapse
Hi MESCU
Could you tell us a little bit more about what happened to your phone and what procedure the guy who fixed your phone did? thx for your help
TAG
phone and the box image
sorry if this is a bit out of place but i had something similiar but not as major...i just tried flashing my radio update today and it went well till it said reboot press home and power...i pressed that then it got stuck in phone and box picture for a good 5 minutes..i didnt know how long to late because im new to this..thankfully when i pressed home and power and it came back to the recovery and i just reboot and it works fine now!
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................
Well, it's simple.
I've been scammed for the first time on eBay.. I bought a phone I thought was a good piece of ****, But when it arrived.. I found an SC6820-based single core 1.0 GHZ phone, with 212MB RAM, GPRS quad band network (****ing 1G..), and a fake Android 4.2.2 ROM based on MocorDroid 2.3.5. Not to mention it took me ages to successfully root it to delete useless system apps..
The phone is a chinese - " BML ONEmini 4" ", Model " E19 ".
Model:E19
Battery:26%
Firmware version:4.2.2
Status:ROOTED
Resolution:480*800
Manufacturer:Unknown
Serial:*****************
IMEI: *****************
IMSI:*****************
MAC:*****************
Android Version:4.2.2
Baseband version: DM_BASE_12A_W13.10|sc6820_modem|03-06-2013 19:20:35
Kernel version:sprdroid_base-user 4.2.2 MocorDroid2.3.5_Trout gc925_1.03_jhm_e19_v06 test-keys
Click to expand...
Click to collapse
Anyway, the problem is simple.
When I turn on WIFI, it finds networks around the area, But when I try to connect into one of them, Just NOTHING happens.. As if I never pressed "Connect". Same happens with my home WIFI, 1cm close to my router.
And the Bluetooth... Well, when I turn it on and start scanning for devices, It just won't find any of my Bluetooth devices... And it's set to be visible.
... And yeah, trust me, I know how to work with my Bluetooth devices.. They're flawless, and were waiting for an answer like good boys... But nothing happens, It doesn't find any devices.
That's pretty much all guys... I hope you can help me somehow, Is there a way to fix the WIFI and Bluetooth here..? So I can at least do something with this piece of ****, lame excuse of a phone..?
It's probably a problem with the ROM, huh..? But still, what do I do...
Thank you.
Well..?
Hi
I have the same phone, that I bought it few days ago. but with a little difference. I bought it as broken phone, the phone was dead and when I tried to turn it on, it was just vibrating. anyway I searched the web and found a proper working rom for it use this rom and write it to your phone. I hope this rom fix your problem .
this is the link for rom: http://www.needrom.com/mobile/bml-one-mini-sc6820/
if you needed any help to update firmware just tell me.
good luck
flashing Spreadtrum phone
samsonmagu74 said:
Hi, I just read your post on your success on flashing a BML One Mini. I am having trouble flashing it with the Research Download tool it just wont work. How did you get it to work? Thanks in advance.
Click to expand...
Click to collapse
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
rayle20 said:
Somebody asked me how to flash an Spreadtrum phone with Research Download tool. I am answering him/her here so some one else may find this useful. and sorry for my bad english in advanced
here are the steps.
1. charge battery at least 50%
2. download Spreadtrum Drivers and install them ( I have downloaded them while ago and now I cant give you exact link, so please google it)
3. take out the battery of your phone, then connect it with usb cable to pc, then while pushing the "vol down" key insert back the battery.(here unknown device will pop out and will install the driver.
4. then you can see that there is a com port added in device manager.
5. take the battery out again
6. now open Research Download tool and then click "load packet" button(first one on the left) and point to your downloaded pac file
7. now press "start downloading" button
8. again while pushing the "vol down" key insert back the battery.
9. download process starts, and if the pac file is right for your phone it will complete and you will see "passed" in the Research Download
that is all, have fun :highfive:
Click to expand...
Click to collapse
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
No problem dear friend, I am glad that I could help you.:good:
htc j one mini china
samsonmagu74 said:
Thank you very much!! My phone works now!! Woo Hoo! So happy:laugh::laugh: :good: Thanks again!
Click to expand...
Click to collapse
i follow all rules but the phone screen is white after i flash it
hey guys new to this place, not that new, i've always search this forum for some rom or how to fix stuff and other help but never post anything here.
so lets get straight to the point. so basically i want to revive my old samsung galaxy tab 10.1. you know, for fun and nostalgia haha (if possible). so i don't really remember what i did to this tablet that it becomes like what it is today. cannot be turned on, no display when charging, no nothing. i do remember rooting it before. when it charge, there is a little warm going on on the tablet but nothing happen. when i connect it to my pc, it recognize it as unknown device the first time, and then i hold the power button for couple of second and my pc recognize it again but now as apx but no driver available. so i made a little research just now and i found that the tablet may have a chance to be fix with the use of nvflash or something. so all im saying is it really my tab can be fix without spending money? if can how do i do it? i have a little experience about flashing rom and recovery. but nothing on how to use nvflash. i do really appreciate your help to bring me back this tab that meant so much for me and my family back in the days.
http://www.gsmforum.ru/threads/223383-Samsung-GT-P7500-%D0%BE%D0%BF%D1%80%D0%B5%D0%B4%D0%B5%D0%BB%D1%8F%D0%B5%D1%82%D1%81%D1%8F-%D0%BA%D0%B0%D0%BA-APX
you download this files...let me know if you fix your tab
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
yes, i can't upload this files...there's a error! did you downloaded 3 files and runned the process? the user doesn't write after the process but i think problem fixed. Ask you with topic when you registe youself...
jackfiq said:
so its seems that i need to register for to download 3 files right? now im waiting for the email confirmation which take too long
Click to expand...
Click to collapse
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
bollicine said:
i can upload only 1 file of 3 files.... 2 files're > of 20MB...let me know if you fix your tab
Click to expand...
Click to collapse
can you guide me on how to do it? from start till end. thank you soo much for helping me out
jackfiq said:
can you guide me on how to do it? from start till end. thank you soo much for helping me out
Click to expand...
Click to collapse
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
https://forum.xda-developers.com/showthread.php?t=1130574]
bollicine said:
1) to install apx driver (NVIDIA driver )
2) to run file .batch
i think this! you check now and write the result!
Click to expand...
Click to collapse
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
jackfiq said:
hey i got a problem, my pc doesnt detect my device as apx something, instead it detects as unknown usb device (invalid device descriptor) . (i've also reset my pc months ago ).
Click to expand...
Click to collapse
you install the driver for to use nvflash...read this guide to install the driver https://forum.xda-developers.com/showthread.php?t=1130574]
but to use file.batch 1th recovery_P75xx.bat of Recovery_P75xx_110710_RemoveUsbDriver.zip to run the nvflash and the recovery and you post the result. bye
I think your battery is complet down, that means the current is under the charging level.
bierma32 said:
I think your battery is complet down, that means the current is under the charging level.
Click to expand...
Click to collapse
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
jackfiq said:
Ooo okok ill try to charge it first then but right now im study away from my home so its gonna take a while but thank you soo much for helping me put
Click to expand...
Click to collapse
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
bollicine said:
Ok! you connect it with power supply for a night.... i hope you can to recharge it if you don't see the battery icon...otherwise you try with a usb cable cut directly on battery's connector and recharge it...you've to remove back cover. Update us, bye!
Click to expand...
Click to collapse
hello again. sorry for didnt post any update . im actually really busy with studies and i already told that my university is far from my home. so i didnt get a chance to get back here until a month. now im here exicted to the thing only then come out with this type of output
Recovery the bootloader...
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
so i've made a little research.. so it seems that my device's bootloader is locked. so is there anyway to unlock my bootloader??
by the way im really sorry i didnt update for a long time. but i hope you still want to keep in touch with me to solve my problem. much thanks!
heres wha i have done and my problem, sure hope theres some help an i havent broken it. Since FuHu has removed the updates i decided to give it a whir myself. I read and read on the nabi and differant ways to update, but none worked. Somehow i deleted the OS, but i figured no problem and found the xda site for the nabi stuff. I was able to install twrp 2.2.2, it wouldnt read the micros sd card, i up graded the twro to 2.8 version, everythig semed to work except the deggone "slide button" id recon youd call it. Back to the drawing board. I down loaded twrp 2.6 for the nabi and installed. Have no idea what went wrong, but now, i fire up the nabi, go into recovery kernal ( without being plugged into the pc ) it just sits there, when i plug the usb cable into nabi then the laptop, it automaticall connects to the driver, and goes to a screen that has,,
bootloader
continue
reboot-bootloader
reboot
power off
now if i press the vol - again it goes to a screen....
boot normally
fastboot protocol
recovery kernal
forced recovery
it just keep fliping back and forth betwen thos 2 screens,it shows connected on my laptop,but try to load anything and it says no device connected..
Truley baffeled,, any help is appreciated
Thank you
Rascle
did you still need help with this i can help you if so i just went through this
buksh0t80.. .. .. yes please, i havent done anything with it for quite some time other than think of using it for target practice
buksh0t80 said:
did you still need help with this i can help you if so i just went through this
Click to expand...
Click to collapse
...
buksh0t80.. .. .. yes please, i havent done anything with it for quite some time other than think of using it for target practice
I just went through the same thing and this helped me fix mine from not even powering on .. go to bootloader where fastboot is in menu and go to forced recovery and download the NABI2RESIZE.zip from https://forum.xda-developers.com/showthread.php?t=2101277&page=13
and follow those instructions in that post make sure you have apx drivers installed .. let me know if you have problems downloading i will upload the files i have used for you to dl but it should fix it .. if not let me know i have become a nabi brick unbrick expert over the last year lmao
i am pretty sure you shouldn't have any problems .. make sure bootloader is unlocked
let me know if you need help i will chat with you somewhere and walk you through it .
buksh0t80 said:
I just went through the same thing and this helped me fix mine from not even powering on .. go to bootloader where fastboot is in menu and go to forced recovery and download the NABI2RESIZE.zip from https://forum.xda-developers.com/showthread.php?t=2101277&page=13
and follow those instructions in that post make sure you have apx drivers installed .. let me know if you have problems downloading i will upload the files i have used for you to dl but it should fix it .. if not let me know i have become a nabi brick unbrick expert over the last year lmao
i am pretty sure you shouldn't have any problems .. make sure bootloader is unlocked
let me know if you need help i will chat with you somewhere and walk you through it .
Click to expand...
Click to collapse
you must have the patience of a cat, i tried for 30 minutes to get to the download, all i got was a page wanting to know if i was a robot and a car page.
Rascle53 said:
you must have the patience of a cat, i tried for 30 minutes to get to the download, all i got was a page wanting to know if i was a robot and a car page.
Click to expand...
Click to collapse
Ok i got the file downloaded today, wont be able to do anything with it untill Monday, we have the grandkids this weekend. Thank you for all your help, will get back to you to let you know how things went.
ok
buksh0t80;
UPDATE...... got the file down loaded an have been trying to use it, however now im fighting driver problems, i was using a samsung driver for it in the past, but now its no recognizing it in usb,says it cannot be found. tried installing pdanet,but same thing. I have a nabi2 that is working, and it wont recognize it either. ive tried 4 differant laptops with windows 7 and one with win 10. So id recoin the update part is im searching for driver that will work