I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
ftarules said:
I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
Click to expand...
Click to collapse
Check out www.mrvanx.org
Might you be using Vista???
What version of VBScript is on your machine???
Why am I using three question marks???
do u have microsoft .net framework installed?
ftarules said:
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
A very similar problem has driven me crazy for weeks when I started messing with the Hermes. In my case, there were several versions of the RUU that would bomb if run from a network drive.
Copy them to the desktop and see if it works. Hope it helps
Solution
Code:
http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
ftarules said:
I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
Click to expand...
Click to collapse
If you search for that error code on Google most of the replies point you to meeding .net framework.
I found this out after clearing out my laptop and not being able to flash Roms which worked before - reinstalling .net cured the problem
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Click to expand...
Click to collapse
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
ah. that makes sense. thanks.
gc14 said:
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
Click to expand...
Click to collapse
when i try to run live search says i need to install net3.5??? im on dcd 3.1.2 and i get the same error when i try to install
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
I don't know what the problem was on your phones....maybe a bad flash...
3.1.2 has cf 3.5. It's located in the SYS folder of your kitchen in a directory called NetCF35 and gets cooked in.
not sure. but net 3.5 didnt show up in list of programs until i installed it myself. i probably already had it. no harm no foul.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Great tip!
This worked for me with the same problem installing NETCFv35 on a Diamond.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Does 3.5 contain everything that 2.0 has? Meaning will programs running with 2.0 work the same with 3.5?
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
GeLopez said:
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
Click to expand...
Click to collapse
Well, I tried what was suggested and it still didn't work.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
Click to expand...
Click to collapse
Worked great! Thanks for the tip. It was driving me crazy
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
YEES! Works HTC TOUCH HD BLACKSTONE
or by changing the DWORD Value! NET CF 2.0 to replace its dword value to = 0, whereas NET CF 3.5 dword value = 1
Hi all.
When I will update my device, AppToDate presents this error:
"An error occured while retrieving the 'Athena Config App' update. The update will not be installed.
3 available downloads:
AppToDate 2.08.04.28 (update done, but still avaliable)
Athena Config App 1.0 (error)
Athena Project ROM 4.0 (I can't select for update)
Anyone?
______________________________________________________________________________________________
Same error. (I think)
jsosow said:
When I ran AppToDate the first time it said it needed to update. It did this but now when I start it is says it has 3 updates, it runs and then I get a error message. You then have to quit the error message. Can anyone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=379773&page=25
______________________________________________________________________________________________
Only this, the rest is ok (thanks raskell for WIFI MAC solution)
(Sorry for my poor english - thanks Google Translator)
I am unable to install some big Gameloft games I am sufficient amount of space but it show error after complete 100% download then installing time it's show error
(during installation unknown error code "505")
please Google solve this problem be quickly
Show quoted text
hello everyone
how can i bypass bellow errors? :
website (textnow.com) ---> (Unknown error - Please try submitting again. If the problem continues contact Customer Care for assistance.)
app (textnow) ---> (an error occured)
i trying this ways :
changing ip - using app cloner - using id changer - using lucky patcher - using open vpn
but i failed
anyone can help me?
(These errors appear when signing up)
agh620 said:
hello everyone
how can i bypass bellow errors? :
website (textnow.com) ---> (Unknown error - Please try submitting again. If the problem continues contact Customer Care for assistance.)
app (textnow) ---> (an error occured)
i trying this ways :
changing ip - using app cloner - using id changer - using lucky patcher - using open vpn
but i failed
anyone can help me?
(These errors appear when signing up)
Click to expand...
Click to collapse
same here , did you know how?