A question about CF-root. - Galaxy S II Q&A, Help & Troubleshooting

Hi, was just wondering if anyone could help me figure out which version of CF-root to use for my S2? Major noob at all this so probably asking a stupid question.
Baseband version - i9100xxlps
build number - iml74k.xwlp7
Thanks.

...

MistahBungle said:
Read the section in the CFRoot thread which has the heading 'Help ! Which file do I use ?' in bold red. This will enable you to choose the correct CFRoot kernel.
Click to expand...
Click to collapse
There are two versions which have the LP7 code that the thread says I should look for. Does it matter which one I use?

...

rosshamilton94 said:
There are two versions which have the LP7 code that the thread says I should look for. Does it matter which one I use?
Click to expand...
Click to collapse
You should use the xw xen lp7 kernel
Sent from my GT-I9100 using Tapatalk 2

Related

[Q] Rooting question

I have a kernel XWKF1 and baseband DXKF1 for my SGS2.
Which rom shd I use to root??
I am confused about the whole kernel and baseband. Wad are their relevance in rooting an android phone???
Here you go
http://forum.xda-developers.com/showthread.php?t=1103399
Select the right Kernel and read the description carefully then root ;-)
D-m-x said:
Here you go
http://forum.xda-developers.com/showthread.php?t=1103399
Select the right Kernel and read the description carefully then root ;-)
Click to expand...
Click to collapse
Thanks, But as u can see the kernel and baseband are different. Which kernel shd I use? And I don;t understand 95% of the article! lol. I am a super noob!! I appreciate if u can help me make sense of all these things.
KF1 Kernel a kernel is not a baseband .
Kernel is the bit between cpu and OS .Baseband is the modem for network/GPS .
As rooting voids your warranty you should understand what you are doing before carrying out the task .
jje
mix1987 said:
Thanks, But as u can see the kernel and baseband are different. Which kernel shd I use? And I don;t understand 95% of the article! lol. I am a super noob!! I appreciate if u can help me make sense of all these things.
Click to expand...
Click to collapse
Well, I have few rooted phones behind me, and honestly, I did not really understand the thread(which is supposed to be for noobs) either... I just picked up one of those Kernels(KF4) and flashed it, phone is working just fine, so I guess I picked up the correct one, however no idea whats the difference between them anyways
2.6.35.7-I9100XWKF4-CL280225 - what to use ?
D-m-x said:
Here you go
http://forum.xda-developers.com/showthread.php?t=1103399
Select the right Kernel and read the description carefully then root ;-)
Click to expand...
Click to collapse
Hi there,
in this thread http://forum.xda-developers.com/showthread.php?t=1103399
I had found CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.zip
if my Kernel Version - 2.6.35.7-I9100XWKF4-CL280225
is this the file I shood use to root my phone.
Thanks Dansk
I happen to have a similar question!
I'm on 2.3.3/XWKF1 right now, if so, should I download CF-Root-SGS2_XW_OJV_KF1-v4.0-CWM4.zip?
But isn't it the KG1 that's gonna update me to 2.3.4?
This info to be exact...
PDA: I9100XWKF1
PHONE: I9100DXKF1
CSC: I9100OLBKE5
byobodybag said:
I happen to have a similar question!
I'm on 2.3.3/XWKF1 right now, if so, should I download CF-Root-SGS2_XW_OJV_KF1-v4.0-CWM4.zip?
But isn't it the KG1 that's gonna update me to 2.3.4?
Click to expand...
Click to collapse
KG1 is just a kernel for andorid 2.3.4..and you need to upgrade rom to 2.3.4 as well.
Freyhk said:
KG1 is just a kernel for andorid 2.3.4..and you need to upgrade rom to 2.3.4 as well.
Click to expand...
Click to collapse
By this you mean I can just go ahead and flash to Chainfire's latest KG1 at the bottom of his list?

[Q] Kernel version TDUKF4 ROOT???

Hi, i got a S2 from vodafone in Australia, which shows the Kernel TDUKF4? I could not find the right Kernel. only KF2? wht different? how can i root my phone?
You need to know your PDA version by pressing *#1234#. Find a same kernel matching your PDA. Like, if your PDA is KF4, then you need to download KF4.zip from the below thread. Read the thread carefully before rooting.
http://forum.xda-developers.com/showthread.php?t=1103399
Regards.
ithehappy said:
You need to know your PDA version by pressing *#1234#. Find a same kernel matching your PDA. Like, if your PDA is KF4, then you need to download KF4.zip from the below thread. Read the thread carefully before rooting.
http://forum.xda-developers.com/showthread.php?t=1103399
Regards.
Click to expand...
Click to collapse
setting---about shows Kernel version DUKF4
bensonwang said:
Hi, i got a S2 from vodafone in Australia, which shows the Kernel TDUKF4? I could not find the right Kernel. only KF2? wht different? how can i root my phone?
Click to expand...
Click to collapse
I could not find the right Kernel from the link you gave me
You have to search mate, this one is KF4.
http://forum.xda-developers.com/attachment.php?attachmentid=630778&d=1308560606
Regards.

Can't seem to find insecure kernel for my model

Hi I followed several guides to rooting my galaxy s2 but I can't seem to find my kernel online. Maybe I'm just looking wrong where our says kernel version it says: 2.6.35.7-SPH-D710.EG30-CL435734 child anyone tell me what kernel I need?
Sent from my SPH-D710 using XDA App
Settings about phone kernel version.
jje
erack1 said:
Hi I followed several guides to rooting my galaxy s2 but I can't seem to find my kernel online. Maybe I'm just looking wrong where our says kernel version it says: 2.6.35.7-SPH-D710.EG30-CL435734 child anyone tell me what kernel I need?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
This forum is for the I9100 model. You will not find any firmware/kernels here for the SPH-D710.
Sent from my GT-I9100M
Ah okay thank you I found the phone it was the samsung epic 4G and I posted this again in theappropriate forum thanks again
Sent from my SPH-D710 using XDA App
Still can't find insecure Kernel.
Hi: having searched, I can't seem to find either a secure or an insecure kernel: looking for BVKH2 - which I guess is quite new since I've just got my handset.
Any other sources that anybody might know of please?
Thanks,
Mike
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
But you will need to read the instructions your current firmware/kernel is KH2 .
Its not new its old firmware .
jje
cant find insecure kernel
hello
am new here, and i can't find insecure kernel in kernel blog for my SGS2
current Kernel version:
I9100TDVKF4
any help?
(maybe its the wrong place to post this but i couldn't post at the link showed above)
HeavyLaws said:
hello
am new here, and i can't find insecure kernel in kernel blog for my SGS2
current Kernel version:
I9100TDVKF4
any help?
(maybe its the wrong place to post this but i couldn't post at the link showed above)
Click to expand...
Click to collapse
Edir didnt want to give false info not sure if the i9100T is supported
Use the KF4 kernel from the CFRoot thread.
HeavyLaws said:
hello
am new here, and i can't find insecure kernel in kernel blog for my SGS2
current Kernel version:
I9100TDVKF4
any help?
(maybe its the wrong place to post this but i couldn't post at the link showed above)
Click to expand...
Click to collapse
thank you, but..
MistahBungle said:
Use the KF4 kernel from the CFRoot thread.
Click to expand...
Click to collapse
thanks but still i don't find any KF4!!
this is the link i am searching in:
http://forum.xda-developers.com/showthread.php?t=1101671
is there anywhere else to look!
HeavyLaws said:
thanks but still i don't find any KF4!!
this is the link i am searching in:
http://forum.xda-developers.com/showthread.php?t=1101671
is there anywhere else to look!
Click to expand...
Click to collapse
I think you missed the part in the first post that said:
Odia said:
Post was getting quite large, so older versions have been removed, they can be found here:-
GT-I9100
Click to expand...
Click to collapse
oops
ctomgee said:
I think you missed the part in the first post that said:
Click to expand...
Click to collapse
guess i didn't noticed the color of the link
one more question:
i must only care for the endig of the Kernel version?(KF4 in my case..)
Correct root file for KI9 kernel
Hello everybody,
I updated my firmware version trough Kies today, from KF3 to KI9.
As I wanted to root my S2 in order to install MIUI, i searched for the KI9 kernel at Chainfire's thread, but didn't find the corresponding file.
I searched the forum and came up with this :
http://forum.xda-developers.com/show...75278&page=708
Unfortunately I can not reply on an developers section of the forum, so i thought this was the best place to ask it:
Which kernel should I use in order to correctly root my phone ?
Many thanks
HeavyLaws said:
guess i didn't noticed the color of the link
one more question:
i must only care for the endig of the Kernel version?(KF4 in my case..)
Click to expand...
Click to collapse
Yes. There's only 1 insecure and 1 secure of KF4 in that link anyways.
---------- Post added at 01:32 PM ---------- Previous post was at 01:28 PM ----------
Sollarking said:
Hello everybody,
I updated my firmware version trough Kies today, from KF3 to KI9.
As I wanted to root my S2 in order to install MIUI, i searched for the KI9 kernel at Chainfire's thread, but didn't find the corresponding file.
I searched the forum and came up with this :
http://forum.xda-developers.com/show...75278&page=708
Unfortunately I can not reply on an developers section of the forum, so i thought this was the best place to ask it:
Which kernel should I use in order to correctly root my phone ?
Many thanks
Click to expand...
Click to collapse
Your link is bad. Has the ellipses in the URL, so it doesn't link to anything.
I can't find a KI9 firmware for the GT-I9100. What is your full model information?
EDIT: I think I see - XWKI9 looks like it is a carrier branded firmware for Belgium, which is why I didn't find it initially. See this post. (which I found REALLY easily with a Google search)
KI9 kernel
Sorry for the bad link, the thread is called : "[ROM+Guide]Official i9100 Firmwares KG, KH, KI, KJ, KK1/2/5, KL1/2/3, LA2 Download" , and the particular post is from "Crucio_".
My full model information is :
Model : GT-I9100
Android-version: 2.3.5
Baseband-version : I9100XXKI4
Kernel-version : 2.6.35.7-I9100XWKI9-CL630390 [email protected] #2
Buildnumber: GINGERBREAD.XWKI9
Thx for the quick response
EDIT: The link you reffered to is actualy the same thread I wrote in this post . I just would like confirmation about the KI4 kernel being compatible with the KI9 version.
Sollarking said:
Sorry for the bad link, the thread is called : "[ROM+Guide]Official i9100 Firmwares KG, KH, KI, KJ, KK1/2/5, KL1/2/3, LA2 Download" , and the particular post is from "Crucio_".
My full model information is :
Model : GT-I9100
Android-version: 2.3.5
Baseband-version : I9100XXKI4
Kernel-version : 2.6.35.7-I9100XWKI9-CL630390 [email protected] #2
Buildnumber: GINGERBREAD.XWKI9
Thx for the quick response
Click to expand...
Click to collapse
See my edit above.
EDIT: ah. That post I linked is the one you attempted to link.
So long story short, you need the same kernel HeavyLaws needed, the KI4 kernel.
I think i understand
I don't want to keep rambling about this, but I would like to understand how this works.
I noticed that the Baseband-version also ends on KI4, is this of any relevance?
So i guess if you have time, i would like the long story
Thx again
EDIT: doesn't HeavyLaws need the KF4 kernel instead of the KI4 kernel?
Sollarking said:
I think i understand
I don't want to keep rambling about this, but I would like to understand how this works.
I noticed that the Baseband-version also ends on KI4, is this of any relevance?
So i guess if you have time, i would like the long story
Thx again
EDIT: doesn't HeavyLaws need the KF4 kernel instead of the KI4 kernel?
Click to expand...
Click to collapse
Re: HeavyLaws - whoops! You're right. He needs KF4. You need KI4. Sorry about that!
So long story isn't really that long actually. From what I understand, Proximus just took XWKI4, branded it, added their tweaks, and re-versioned it as XWKI9. There are probably more details than that, but I don't really know all of them.
KI9 kernel
I get it
So in theorie, flashing the KI4 kernel should't give any problems cause it's basically the same kernel as the KI9 with some minor tweaks?
Just want to be sure that i won't jam my phone by using this kernel .
Thx for the answers man, I appreciate it
Sollarking said:
I get it
So in theorie, flashing the KI4 kernel should't give any problems cause it's basically the same kernel as the KI9 with some minor tweaks?
Just want to be sure that i won't jam my phone by using this kernel .
Thx for the answers man, I appreciate it
Click to expand...
Click to collapse
Pretty much, but you can just flash the KI9 kernel back after you get root if you want. Stock KI9 kernel is on this page, just search for the term "XWKI9 Stock Kernel". This will also have the effect of getting rid of the yellow triangle when rebooting the phone.

[Q] Can't find a Kernel for my phone

Hello there,
I can't find my kernel model anywhere on the internet. Could you please support me with this one? I'm somewhat a newbie at this rooting business.
Settings -> About phone - Kernel Version states 2.6.35.7-I9100XWKDD-CL161513 [email protected] #2
- Build number is "GINGERBREAD.JIKG3".
- Basband Version is I9100TJIKG3
Anyone?
Thank you very much,
RawrGasm
Any gingerbread kernel should work, check out the Galaxy Sii developer section, If you mean you need a stock kernel, I have no idea.
Sent from my GT-I9100 using XDA
okmijnlp said:
Any gingerbread kernel should work, check out the Galaxy Sii developer section, If you mean you need a stock kernel, I have no idea.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Not true... OP, you need a KG3 kernel. Look in Odia's insecure kernels thread. I'm mobile, so can't link. Just search for it. There's a link near the top that's with big red text for older kernels. Check in there.
ctomgee said:
Not true... OP, you need a KG3 kernel. Look in Odia's insecure kernels thread. I'm mobile, so can't link. Just search for it. There's a link near the top that's with big red text for older kernels. Check in there.
Click to expand...
Click to collapse
I need a KG3 kernel because of what, build number reading KG3 at it's end or the baseband version? Because if it's the Baseband Version, I was wrong, it's KG1 at the end. So tell me please, if my baseband version is I9100TJIKG1, do I need a KG1 kernel?
RawrGasm said:
I need a KG3 kernel because of what, build number reading KG3 at it's end or the baseband version? Because if it's the Baseband Version, I was wrong, it's KG1 at the end. So tell me please, if my baseband version is I9100TJIKG1, do I need a KG1 kernel?
Click to expand...
Click to collapse
Pretty sure it's the build version. Baseband is for modem.

looking for a CF-root for my phone

hello,
im looking for a Cf-root for my phone
my kernel at this moment is [email protected]#3
does anyone know wher i can find on that fits my phone?
You can see if its in Chainfires cf-root thread.
Sent from my GT-I9100 using xda premium
MistiaenPieter said:
hello,
im looking for a Cf-root for my phone
my kernel at this moment is [email protected]#3
does anyone know wher i can find on that fits my phone?
Click to expand...
Click to collapse
u can find one in the link below
the nearest matching one is 'CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5.zip'
CF-Root Kernels
Sun90 said:
u can find one in the link below
the nearest matching one is 'CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5.zip'
CF-Root Kernels
Click to expand...
Click to collapse
done, done and done.
thx to all

Categories

Resources