attempted to root my SPH-L710 and am now stuck in purgatory!
Using Odin 3 and Samsung GS3 Tool kit I downloaded the latest Samsung Drivers, Odin seemed to flash just fine but then the phone would not reboot.
Currently I am able to get into
Download Mode
-odin mode
-product name SPH L710
-custom binary download: yes (12 counts)
-current binary : custom
-System Status: official
-Qualcomm secureboot: enable
Then I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
or
Downloading Do not turn off Target
Recovery Mode
-was able to get into recovery and now I am not able
after I push the tar root file it seems to take but the phone will not reboot
Thanks!
rvshaw said:
attempted to root my SPH-L710 and am now stuck in purgatory!
Using Odin 3 and Samsung GS3 Tool kit I downloaded the latest Samsung Drivers, Odin seemed to flash just fine but then the phone would not reboot.
Currently I am able to get into
Download Mode
-odin mode
-product name SPH L710
-custom binary download: yes (12 counts)
-current binary : custom
-System Status: official
-Qualcomm secureboot: enable
Then I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
or
Downloading Do not turn off Target
Recovery Mode
-was able to get into recovery and now I am not able
after I push the tar root file it seems to take but the phone will not reboot
Thanks!
Click to expand...
Click to collapse
Ok, pushed CWM V5 5.0.4 through Odin and able to access the CWM based Recovery but not able to do a reboot even from here I have access to the a SD card but cannot seem to access it to put a rom zip on it
If you have an actual microSD card, load a ROM zip on it then insert it in the phone. You can flash from external SD.
Also your product name indicates you have the Sprint variant. In your screen shot of Odin it says "gsm" at the end of that boot.img
If you look in the Sprint development threads there's a thread for an insecure boot.imf... For SPH-L710 (Sprint)
Sent from my SPH-L710 using xda premium
fergie716 said:
Also your product name indicates you have the Sprint variant. In your screen shot of Odin it says "gsm" at the end of that boot.img
If you look in the Sprint development threads there's a thread for an insecure boot.imf... For SPH-L710 (Sprint)
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Thanks, I am sure that was the issue was able to reboot into stock and will do a little more research this time around!
Related
I just picked up a used S3 and tried rooting using S3 Toolkit. I loaded the .tar in Odin3 and everything seemed to go fine, got a green PASS square. But the phone will not boot past the sammy logo. I can get back to download option. In download mode the top left shows:
CUSTOM BINARY DOWNLOAD: Yes (7 counts) I've tried a few times to flash the .tar
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: Enable
I used this guide to try flashing both the secure and insecure .tar:
http://forum.xda-developers.com/showthread.php?t=1671969
I'm in the process or downloading the 779mb firmware form the samware site.
Any help is greatly appreciated.
TahoeTexan said:
I just picked up a used S3 and tried rooting using S3 Toolkit. I loaded the .tar in Odin3 and everything seemed to go fine, got a green PASS square. But the phone will not boot past the sammy logo. I can get back to download option. In download mode the top left shows:
CUSTOM BINARY DOWNLOAD: Yes (7 counts) I've tried a few times to flash the .tar
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: Enable
I used this guide to try flashing both the secure and insecure .tar:
http://forum.xda-developers.com/showthread.php?t=1671969
I'm in the process or downloading the 779mb firmware form the samware site.
Any help is greatly appreciated.
Click to expand...
Click to collapse
Do you have an International Galaxy S3 quadcore or US Dual core S3. If not Inetrnational exynos quadcore cpu you`re in the wrong Forum !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Pull the battery,wait for 30 seconds. Reinsert the battery and reboot in download mode and flash CF-Root with Odin v3 3.0.4 for superSU, CWM and busybox. See item 1 in my signature how to do it. After you`re rooted instal Triangle Away from the same CF-Root thread and reset the binary counter from 7 to 0.
QUALCOMM SECUREBOOT: Enable
In your post says you are in the wrong forum see sticky top of the page .
Do not flash any firmware this is a different phone .
Take advice from the correct forum .
jje
Yes, bone head mistake on my part. I searched for Samsung Galaxy S3 and ended up in the non-Verizon forum. Stupid me.
Luckily I was able to get it all sorted once I found the right forum.
Sent from my SCH-I535 using Tapatalk 2
Hi all
Been struggling with GF's S3 for a couple days now..
One night her unrooted S3 wouldnt start, its just stuck in bootloop or with a dead android on the screen.
I can get it in android system recovery mode and in download mode så I suppose its not hard bricked...
Ive tried Odin3 (all versions) with different stock firmwares. Hers is the international version bought in Australia (we live in Norway so cant get a new one on warranty..)
As said; tried different firmware in Odin with no luck, tried recovery files in Odin, no luck, tried wiping/factory reset from android recovery etc.
In recovery the error says "e: failed to mount /system (no such file or dir)
Since its unrooted I cant install a custom rom through CWM.
Any suggestions?
Thanks!
What does download mode say?
What's the odin error message?
Sent from my GT-I9300 using Tapatalk 2
Download mode says:
Odin mode
Product name; GT-I9300
Custom binary download: No
Current binary: Samsung official
System status: Official
Downloading...
Do not turn off the target!!
Odin:
http://bildr.no/view/anZTUTFs
Ceba said:
Download mode says:
Odin mode
Product name; GT-I9300
Custom binary download: No
Current binary: Samsung official
System status: Official
Downloading...
Do not turn off the target!!
Odin:
http://bildr.no/view/anZTUTFs
Click to expand...
Click to collapse
Since you are still on Pure Stock , you could just walk in and give to the phone to the service centre ... if you are still under warranty?....
a losse usb connection? may be? if you can enter downloade mode, try all the usb ports on pc and flash a stock rom. installed drivers? stopped kies in the background?
-------------------------------------
please let me know if i'm wrong and CLICK thanks if i help
SRIRAM
sent from my GT-I9300 running CM10.1 RC5.6 by Temasek
CWM TOUCH RECOVERY FOR SAMSUNG GALAXY MEGA 6.3(GT-I9200)
Installation:-
1.Go to Download Mode By Pressing (Volume Down +Home +Power) And Connect Your Phone To PC.
2.Launch Odin v3.09.
3.Browse recovery.tar.md5 as PDA
4.Hit Start and Wait.
5.After Installation Go To CWM (Volume Up +Home +Power).
6.Make Sure That In Odin the Auto Reboot And F.Reset Time Checkboxes Are Selected, Uncheck The Re-Partition And Other Option.
Rooting:-
1.Download UPDATE-SuperSU-v1.34.zip from the download section.
2.Then go to cwm recovery.
3.Then choose install zip and then install UPDATE-SuperSU-v1.34.zip
4.Make sure that you have a cwm backup before doing rooting.
Download Link:-
Odin v3.09- http://d-h.st/UIo
CWM TOUCH RECOVERY - http://d-h.st/7VS
UPDATE-SuperSU-v1.34.zip- http://d-h.st/ikN
I DO NOT TAKE ANY RESPONSIBILITY WHAT HAPPENS TO UR PHONE.
Sorry my bad English, so I made another post format
mingyuehaokong said:
cwm touch recovery for samsung galaxy mega 6.3(gt-i9200)
installation:-
1.go to download mode by pressing (volume down +home +power) and connect your phone to pc.
2.launch odin v3.09.
3.browse recovery.tar.md5 as pda
4.hit start and wait.
5.after installation go to cwm (volume up +home +power).
6.make sure that in odin the auto reboot and f.reset time checkboxes are selected, uncheck the re-partition and other option.
Rooting:-
1.download update-supersu-v1.34.zip from the download section.
2.then go to cwm recovery.
3.then choose install zip and then install update-supersu-v1.34.zip
4.make sure that you have a cwm backup before doing rooting.
Download link:-
odin v3.09- http://d-h.st/uio
cwm touch recovery - http://d-h.st/7vs
update-supersu-v1.34.zip- http://d-h.st/ikn
i do not take any responsibility what happens to ur phone.
Sorry my bad english, so i made another post format
Click to expand...
Click to collapse
have you tried it buddy? The cwm?
Doesn't work or is the same CWM we already have.
I flashed it over the exiting CWM and it looks the same, certainly is not touch activated.
Does this method still show the 2 red lines of code at the top when booting?
Kangburra said:
Doesn't work or is the same CWM we already have.
I flashed it over the exiting CWM and it looks the same, certainly is not touch activated.
Click to expand...
Click to collapse
I'm having an absurd issue with my phone and really would like some expert advice.
I just bought my phone (GT-I9205). Is still all stock. I am trying to install CWM Recovery with ODIN but seems nothing gets flashed into the phone except that I am stuck with the stock Recovery.
USB Drivers correctly installed on my laptop and the flash process seems successful under ODIN (..tar file upload to phone goes smooth and and then phone successfully resets). But when I go back to Recovery mode, actually, nothing was flashed. Same old stock recovery screen. What the hell? Am I doing something wrong in ODIN settings (CWM tar file flashed as PDA and everything else as default), or is my phone crazy?.. I really have no idea whats going on. In fact Ive tried flashing other versions of CWM and same thing happens.
And my stock recovery screen itself has issues problems.. when entering the recovery mode it briefly displays the word ERROR and I get a sad Android guy with a RED explanation mark with the wording NO COMMAND. Totally stuck. I have positively no idea whats going on. Years flashing phones and doing all sorts of things, nothing like this before..
My phone was an open box.. maybe someone did something to it and totally messed it up.. no clue..
please is this valid for the 9205 lte? thankes
pleas delete
I tried this and it worked on the bell version model I527M
The red line when booting will gone if you flash back your kernel. ..stock kernal...
The rooting kernal is to provide su update...
Sent from my GT-I9205
defender007 said:
I tried this and it worked on the bell version model I527M
Click to expand...
Click to collapse
I can also verify this method works with Rogers i527m for recovery and root
work fine for me i have mega 6.3 gt I9200 nice work man thanks
Enviado desde mi GT-I9200 usando Tapatalk 4
I am with Sasktel and i have the SGH-I527M and this cwm recovery and SuperSU work great on this phone..thanks very much for this.
Samsung Mega i9200 rooted successfully and all working fine so far.
Can any help to root the i527 att please
Sent from my SAMSUNG-SGH-I527 using xda premium
I... seem to have an issue. I can't seem to find the USB Debugging mode on my GT-i9200... I literally don't have the option. Or... I'm going crazy.
1. Goto Settings -> About Phone.
2. Goto “Build Number” at the end of the Scroll list.
3. Tap on “Build Number” repeatedly (7 times). On your third tap you should see message indicating that you only have 4 more taps to go to ‘become a developer’.
4. Continue: 4 more taps.
5. Hooray, you are now a ‘Developer’, go back to the Setting page.
6. You should see Developer Option menu item in your setting list now.
7. Open Developer Options and check USB debugging > Ok
Kangburra said:
steps 1-8
Click to expand...
Click to collapse
I actually ended up not needing it, but it's nice to see I wasn't going insane for the time I spent looking for it... Thanks again.
Question
Any New Update for CWM???
I've just updated my I9200 into I9200XXUBMJ4 XSE, and CWM 6.0.3.2 couldn't be used. I flashed via odin and try to boot into and It just say No Command and back to old Stock recovery.
Any ideas???
pikwan80 said:
Any New Update for CWM???
I've just updated my I9200 into I9200XXUBMJ4 XSE, and CWM 6.0.3.2 couldn't be used. I flashed via odin and try to boot into and It just say No Command and back to old Stock recovery.
Any ideas???
Click to expand...
Click to collapse
Not sure on this but did you root your phone since the update..if not try kingoroot and then try flashing the recovery again.
Sent from my SGH-I527M Mega 6.3
On my first firmware I9200 XSE XXUMAEE, I have rooted the device using latest i9200-cwm-recovery(201362118259).tar and superSU 1.51 and works fine, then I reinstall ( flash ) the firmware using the original firmware from sammobile XSE XXUMAEE to restore back everything to receive OTA into XSE XXUBMJ4, when UBMJ4 successfully updated my I9200 I tried to install i9200-cwm-recovery(201362118259).tar and flashed successfully via odin, and I used the usual way to boot into CWM but cannot run and the device run the stock recovery. I've tried last TWRP 2.0.3 and still the same.There is no other way and I flash original I9200 XSE XXUMAEE ( Downgrade ) and clean the device using CWM ( format /system ) then flash again I9200 XXUMAEE. Now I'm still using XXUMAEE and rooted, waiting for the new CWM. This is all my experience. at CWM last log all my i9200 system back to XXUMAEE except bootloader still remain XXUBMJ4.
By the way what is kingoroot??? never heard that.
---------- Post added at 09:31 AM ---------- Previous post was at 09:25 AM ----------
Guys, When I tried XXUBMJ4 on my I9200, it run like android 4.3 have move to sd feature and everything new and consume less RAM. Can't hardly wait for new CWM.
Thanks for the experts who create this CWM.
Love CWM more than TWRP.
Hello I bought my P7500 in Malaysia from an independent computer store (not tied to a carrier) about 2 years ago and I recently decided that I'd like to check out CM before I buy my next android device to see if it's important to me to be able to have CM on my next tablet. I took the files from the CM's wiki on how to install CM on the P4. I'm able to get into download mode on the tablet and successfully install the CWM according to Odin 1.85. After I reboot though I still have the standard Samsung recovery binary and when I attempt to repeat the steps it says;
Reason: Force Key,
Secure Mode: Secure,
Check Signature: Check,
Custom Binary download: No (0 count),
Current binary: Samsung Official.
I'm using the official cable that came with the device (sometimes it's finicky about connecting) and Windows downloaded the drivers for it when I first connected the device to my PC. The only other thing I can think of is it has an official version on ICS 4.0.4.
Any help on why I'm having these issues.
Once you've installed cwm, then boot into recovery. Its the other icon when you boot into download mode. It should show a customized recovery rather than the stock one. I believe the infos you gave was from download mode right?
Sent from my GT-P7500 using Tapatalk HD
Fixed
Ok I figured it out. The problem seems to be that Odin needed to be restarted for each of the 3 different files that the CM instructions are telling you to install with it. I decided to try it in reverse recovery.tar.md5 -> modem.tar.md5 -> bootloader.tar.md5 and noticed only the 1st file is loaded properly. So if your following the instructions at wikic[dot]cyanogenmod.org/w/Install_CM_for_p4 then you need to know to restart Odin between each file.
Actually I think you should read this thread http://forum.xda-developers.com/showthread.php?t=2074202. It has all the information you need and contains the right gapps for our device if you want to flash cm10.1.
Sent from my GT-P7500 using Tapatalk HD
xtertristl said:
Ok I figured it out. The problem seems to be that Odin needed to be restarted for each of the 3 different files that the CM instructions are telling you to install with it. I decided to try it in reverse recovery.tar.md5 -> modem.tar.md5 -> bootloader.tar.md5 and noticed only the 1st file is loaded properly. So if your following the instructions at wikic[dot]cyanogenmod.org/w/Install_CM_for_p4 then you need to know to restart Odin between each file.
Click to expand...
Click to collapse
I can tell you this... on the epic 4g touch... Odin doesn't like to try and flash more than one thing at a time...
I'm not sure how you went about using Odin, but if you need any help... I'm always around..
I own a Galaxy S4 locked to AT&T. I had my phone rooted and i was running on 4.4.2 through OTA update with NI1 baseband. I also had installed safestrap as my recovery. I was trying to unlock my phone and a guide said to downgrade to NB1 and so i downgraded to NB1 through odin as I read. After doing so my phone was stuck on the AT&T logo while booting. So i tried to flash back to NI1 but the phone went to a bootloop with and i still had 'custom' below the samsung logo when it booted. I tried to fix it with Kies but it failed to fix it and now all i get is ' Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I tried to fix it through Kies emergency firmware recovery and also through Kies firmware upgrade and initialisation and after downloading the firmware it shows it encountered and unknown error and when it does not show anything in the list below in recovery window. I tried flashing NI1 stock recovery and kernel as well as NC1. But couldn't fix it. I also tried to see how to get rid of odin mode but still i failed to fix it.
At the top of the screen after turning it on it says:
ODIN MODE (shows in red color)
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enabled
eMC BURST MODE enabled (Last two lines are in gray color and every lines except the first is in white color)
In download mode when kies fails two more lines in red are added :
START [224, 140]
SV REV. CHECK FAIL : fused , Binary : 1
Thanks to all you for your time. This is my first post I am sorry if i made it lengthy with irrelevant and or unnecessary information. Thank you once again.
View attachment 2999531
View attachment 2999534
View attachment 2999535
View attachment 2999536
View attachment 2999550
View attachment 2999553
View attachment 2999554
It's not uncommon to have to do a factory reset after doing an Odin restore. I'd use it to reflash the latest version and use the stock recovery to reset and then try to reboot.
es0tericcha0s said:
It's not uncommon to have to do a factory reset after doing an Odin restore. I'd use it to reflash the latest version and use the stock recovery to reset and then try to reboot.
Click to expand...
Click to collapse
I tried to. i can not flash stock recovery back. it says pass in odin but when it boots up it says custom and gets stuck in a boot lop for sometime then shuts it self down. Am i doing something wrong? Did I flash an outdated stock recovery or something? I wanted to odin NI1 but i couldnt find complete odin files for it just found rooted ones.
Vilthru said:
I tried to. i can not flash stock recovery back. it says pass in odin but when it boots up it says custom and gets stuck in a boot lop for sometime then shuts it self down. Am i doing something wrong? Did I flash an outdated stock recovery or something? I wanted to odin NI1 but i couldnt find complete odin files for it just found rooted ones.
Click to expand...
Click to collapse
I think that update is only available via OTA file. Looks like you should still be able to do NB1. Check here for details on the upgrade path suggested:
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
THANKS! It worked
es0tericcha0s said:
I think that update is only available via OTA file. Looks like you should still be able to do NB1. Check here for details on the upgrade path suggested:
http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
Click to expand...
Click to collapse
Thank you so much it worked. its running again! Thanks you loads and loads
Vilthru said:
Thank you so much it worked. its running again! Thanks you loads and loads
Click to expand...
Click to collapse
:good::highfive::victory: