Urgent!Mobile is fastboot mode - Optimus One, P500, V General

I have an LG Optimus one p500 that's stuck in fastboot mode.
After doing factory reset,phone entered in fastboot mode. After selecting that the phone rebooted but was stuck in Fastboot mode. It's been stuck for 5 days and I can't figure out how to exit fastboot or just reboot regularly.
Methods tried:
-Battery pull then turn on
-Press and Hold Homekey, Powerkey and Volume down when booting
-Run fastboot on my command prompt and reboot, continue or flash command
-Phone is not entering emergency mode
<But they all end in fsatboot mode "Fastboot: Processing Commands" still>
I've tried everything and read everyforum, My questions
1)How can I just reboot my phone regularily! so it's not in fastboot mode?
2) Is there a command prompt for fastboot that willl exit fastboot?
I just want my phone to work normally! Please help, much appreciated!
Please reply fast because my phone's warranty is over.

Most probably, your custom recovery got corrupt
Use this guide: http://forum.xda-developers.com/showthread.php?t=1088046
This will erase the current corrupted recovery and flash the new one.
Use the recovery.img of CWM 5.0.2.0 instead of 5.0.2.7 (Unstable)
EDIT: Download CWM 5.0.2.0 Recovery Image here (Make sure to rename it to "recovery.img")

DJoptimus-One said:
Most probably, your custom recovery got corrupt
Use this guide: http://forum.xda-developers.com/showthread.php?t=1088046
This will erase the current corrupted recovery and flash the new one.
Use the recovery.img of CWM 5.0.2.0 instead of 5.0.2.7 (Unstable)
EDIT: Download CWM 5.0.2.0 Recovery Image here (Make sure to rename it to "recovery.img")
Click to expand...
Click to collapse
Actually,my mobile was not getting recognized by pc.
But after lot of efforts,i have flashed original LG rom.
Now,the problem left is fastboot mode.
I have tried flashing different recoveries and it shows that recovery gets updated.When I entered" fastboot reboot ",then it again entered in fastboot mode.
Then,I entered "reboot recovery" in terminal emulator.Then,it entered in correct recovery mode.So,I feel that Button combo have been changed or I have to disable fastboot mode from some settings or adb(as read in some forum).Can you help me regarding this?

please help
someone please reply here

U most likely pressed something else instead of power+down volume+home
Sent from my LG-P500 using xda premium

puneet9 said:
-Press and Hold Homekey, Powerkey and Volume down when booting
Click to expand...
Click to collapse
You should press home and vol key first and then press power.
Ignore if you do it correctly

Again:
Press and HOLD: Vol DOWN + Home-Key + Power until recovery starts. Home-Key + Power is the combo for Fastboot mode.

Hey
I´ve got the same problem, but when I try install Android SDK it says Java DK isnt installed, which is false cos I have it already instaled..
I checked the Google, but only what I found was information which says " click back, then click next" But it didnt help me.
Can you please help me about this..
P.S. I tried KDZ too but it didnt find my phone..
EDIT: Oh yeah. Solved

KDZ isn't related to fastboot errors anywhere.

http://forum.xda-developers.com/showthread.php?t=1350733
Sent from my LG-P500 using xda premium

U need to set variable for JAVA HOME
Sent from my LG-P500 using xda premium

Related

What is the combination to boot into recovery mode on samsung galaxy i5500

My samsung i5500 wont boot normally so I want to try booting it into recovery and reseting it. Ive tried power, centre key and volume down. which I thought was the recovery combination but it just comes up with an icon saying downloading and does nothing.
If anyone else knows a recovery combination or another way to fix it please comment
according to a post here...
http://forum.xda-developers.com/archive/index.php/t-781149.html
It's the volume down, then center key, then power. Make sure your not letting go after pressing them in that order... Order is important if you were doing power, center then volume down it will not work in that order.
I'm also trying to get into recovery mode to clear the dalvik cache and I'm stuck on the same downloading screen. I connected the usb cable, waited 5 minutes, started kies, waited 5 more minutes. What needs to be done on the downloading screen?
me to any help here
Check my thread #9
You will need fastboot and recovery.img to boot into recovery in order to perform a factory reset.
http://forum.xda-developers.com/showthread.php?t=1136958
Hello. I have a i5500 and i instal clockworkmod on it..but how can i get in clockwork recovery to install updates from zip ?? If i keep pressing the buttons that u told, i get in the downloading mode. Thanks in advance.
I have the same problem now. I want to get into RECOVERY MODE, not DOWNLOAD MODE. Does anyone know the keys combination?
How to boot into Recovery
adrianohck said:
I have the same problem now. I want to get into RECOVERY MODE, not DOWNLOAD MODE. Does anyone know the keys combination?
Click to expand...
Click to collapse
There is no key combination for this device.
In order to get to Recovery you need to boot Android, enable USB Debug Mode. Then connect to PC via USB cable, open ADB and type "adb reboot recovery"
If you cant boot into Android you'll need to flash recovery with Odin and it'll boot into Recovery after flashing.
also if using CM7 you can choose to boot into recovery when restarting phone.
If there is a way to boot to Recovery from download mode please someone explain how.
Franivelius said:
There is no key combination for this device.
In order to get to Recovery you need to boot Android, enable USB Debug Mode. Then connect to PC via USB cable, open ADB and type "adb reboot recovery"
If you cant boot into Android you'll need to flash recovery with Odin and it'll boot into Recovery after flashing.
also if using CM7 you can choose to boot into recovery when restarting phone.
If there is a way to boot to Recovery from download mode please someone explain how.
Click to expand...
Click to collapse
Thanks guy! I have tried that and it workded for me.
How to get into Recovery directly
Franivelius said:
There is no key combination for this device.
In order to get to Recovery you need to boot Android, enable USB Debug Mode. Then connect to PC via USB cable, open ADB and type "adb reboot recovery"
If you cant boot into Android you'll need to flash recovery with Odin and it'll boot into Recovery after flashing.
also if using CM7 you can choose to boot into recovery when restarting phone.
If there is a way to boot to Recovery from download mode please someone explain how.
Click to expand...
Click to collapse
On my GT-I5500M, after installing CWM via Odin, from powered-off state, I can press and hold Volume Down, Start Call, End Call (3 buttons simultaneously), hold 'em past the Samsung boot screen, and you eventually get into Recovery mode without going into Download mode. YMMV but it works for me.
HELP - Boot Loop Samsung Galaxy GT-I5500
mughalgxt said:
Check my thread #9
You will need fastboot and recovery.img to boot into recovery in order to perform a factory reset.
http://forum.xda-developers.com/showthread.php?t=1136958
Click to expand...
Click to collapse
Hi,
I have the same problem as the author of the topic, my galaxy GT-I5500 doesn't turn on, it's on an unlimited boot loop, i can enter on Downloading mode, but if i connect the phone to the computer, the computer doesn't recognize the phone (probably because of lack of driver's), so, i can't access ADB or Odin, or do anything, could you please help me ?
best regards!
falta

[HELP PLZ] Re-flash stock Recovery!!!

Recently, I was foolish enough to play around with the tool WSG UnBricker v1.0.3, and I went to flash the recovery (option to flash own image), I then drap the one that's bundled with the tool to flash it, after that I couldn't enter the stock recovery to see the familiar dead Andy, nor can I factory reset the device any more.
When trying to factory reset it, I kept getting the error (in red) that says "Unrecoverable bootloader error 0x00000000", then the device just hangs there.
My TF201 is still locked, not rooted, it is on Jelly Bean and other functions are still OK. I can still boot it and use it normally, just can't factory reset it and get the "Unrecoverable bootloader error 0x00000000" error.
So, please, If anyone has any idea to deal with this, please help me!!! I've been looking all around but to no available. How foolish of me to have done it!!!
What exactly did you try to do with the WSG tool??
Anyway, you could try one of these methods to do a complete restore...
Download the stock ROM (http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download)... it has a zip within a zip... extract the first zip and you should have a file with a name like US_epad-user-10.4.2.15.zip (or WW or TW depending on which zip you downloaded)
1. Flash via recovery
- Copy the update zip (e.g. US_epad-user-10.4.2.15.zip) to your sdcard
- Open adb shell and enter the following command
Code:
echo '--update_package=/sdcard/US_epad-user-10.4.2.15.zip' >> /cache/recovery/command
- Reboot and enter recovery mode [Power + Vol Down, then select RCK and press Vol Up]
- You should see the recovery screen (green Android with progress bar)
- It should reboot & then you see the blue progress bar on the Asus splash screen
- Let it finish and boot up.
- Now start it up using the Power + Vol Down key, then use the Vol Down key to highlight Wipe Data and pre the Vol Up key. This may take a few minutes.
2. Flash via fastboot
- Extract the blob from the update zip (e.g. US_epad-user-10.4.2.15.zip) on your computer
- Start the device in fastboot mode [Power + Vol Down, then select the USB symbol and press Vol Up]
- Run the follow command in a terminal window
Code:
fastboot -i 0x0b05 flash staging blob
- You should see the fastboot command transfering the files. Once that is done, reboot
Code:
fastboot -i 0x0b05 reboot
- It should reboot & then you see the blue progress bar on the Asus splash screen
- Let it finish and boot up.
- Now start it up using the Power + Vol Down key, then use the Vol Down key to highlight Wipe Data and pre the Vol Up key. This may take a few minutes.
craigacgomez said:
What exactly did you try to do with the WSG tool??
Anyway, you could try one of these methods to do a complete restore...
Download the stock ROM (http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_Prime_TF201/#download)... it has a zip within a zip... extract the first zip and you should have a file with a name like US_epad-user-10.4.2.15.zip (or WW or TW depending on which zip you downloaded)
1. Flash via recovery
- Copy the update zip (e.g. US_epad-user-10.4.2.15.zip) to your sdcard
- Open adb shell and enter the following command
Code:
echo '--update_package=/sdcard/US_epad-user-10.4.2.15.zip' >> /cache/recovery/command
- Reboot and enter recovery mode [Power + Vol Down, then select RCK and press Vol Up]
- You should see the recovery screen (green Android with progress bar)
- It should reboot & then you see the blue progress bar on the Asus splash screen
- Let it finish and boot up.
- Now start it up using the Power + Vol Down key, then use the Vol Down key to highlight Wipe Data and pre the Vol Up key. This may take a few minutes.
2. Flash via fastboot
- Extract the blob from the update zip (e.g. US_epad-user-10.4.2.15.zip) on your computer
- Start the device in fastboot mode [Power + Vol Down, then select the USB symbol and press Vol Up]
- Run the follow command in a terminal window
Code:
fastboot -i 0x0b05 flash staging blob
- You should see the fastboot command transfering the files. Once that is done, reboot
Code:
fastboot -i 0x0b05 reboot
- It should reboot & then you see the blue progress bar on the Asus splash screen
- Let it finish and boot up.
- Now start it up using the Power + Vol Down key, then use the Vol Down key to highlight Wipe Data and pre the Vol Up key. This may take a few minutes.
Click to expand...
Click to collapse
Thanks a lot, craigacgomez!!! I had to try to use the 2nd option you gave me (flash via fastboot), as my Recovery was probably screwed; as I said before, I couldn't get into Recovery (stock recovery I think, because it's still not unlocked, not rooted), just says "Unrecoverable bootloader error 0x00000000". However, even with the 2nd option, when I try the reboot command, the device just stays there, and the writing process before it only took about 3s as the picture I attached herewith. I tried to manually reboot it after "fastboot -i 0x0b05 flash staging blob", but the device still booted as If nothing was done using the command.
I think the jellybean stock recovery is screwed, only by successfully re-flashing it, can I do the factory reset. Now, it can boot and be used normally but not factory reset. The reason I tried to play with the tool was because I am one of the very "luck" users that have to live with the infamous "Serial unknown" feature!!! For one second of misthought and alcohol, I somehow screwed it like this.
So, what can I do now to re-flash the stock recovery, please tell me! Thanks a lot again man.
I just tried to cold boot the device using the Volume down+Power and let it pass the 10s. After that, the screen says it's cold booting linux or something, then a signature match, but it hangs there. I pressed and held Power until It reboots, but this time It won't even get passed the Asus splash screen. I just officially get an expensive "temporary" paperweight!!! Someone, please help!!!!!!!
Please, anyone???
Same original problem as OP. Not sure about the bricking problem...
I also receive that error when attempting to boot from recovery. However, I can still boot normal and seems I can wipe data. Also, I can start fastboot...but it seems to only be responsive to one command before it becomes unresponsive. Adb doesn't seem to be seeing the device anymore. And I can boot into APX.
This doesn't really help the OP if bricked, but providing these details, because I am still trying to find a solution to the same original problem.
Maybe it's time for me to use Asus's warranty service?
found the solution to this problem?
found the solution to this problem? I am presenting the same problem! someone please help me
same here... I have 10.6.1.8 bootloader currently, courtesy the previous owner and I can't seem to flash anything. After sending a command to the device, it becomes unresponsive and just freezes.
Now, as it is possible to send a file over to the device, does it stay there? It looks like there is only one command that can be executed and that is sending. Maybe if the file was there, the one command would be flashing the file? Just grasping at straws
I have a similar problem.
Can access fastboot, but the unrecoverable error appears every time i enter recovery or wipe mode.
Also fastboot freezes after i flash something.
My opinion: Hard brick. You need to replace the motherboard.
I am almost ready to accept it... However, as the bootloader is from TF300, would it be possible to use those drivers to communicate with the device? I'm at work right now so can't test, but it seems like a remote possibility
Sent from my HTC Sensation using xda app-developers app
similar here
I also have the bootloader error 0x00000000,
bought the prime second hand and thought I would unlock and try some new ROM, I have done successful root flash etc on my old HTC desire to get it running JB ROMs so thought would give it a go on PRIME, big mistake!! rushed into it like an absolute moron and now have a lovely paperweight!
Everything I have read suggests this is unfixable but I found the tool WSG unbrick and thought hey hey here we go!! but no dice.
The erasing tools seem to do everything but when I tried to install the full unbrick option (write partitions) it just goes straight to the reboot menu with a message that "this menu is only for when the device is in bootloader mode" same for any other install option!
Every time I try to flash something in fastboot it seems like it disconnects or fastboot stops working,
I am pretty much ready to give up and admit defeat, phone call to ASUS!!!
example of what happens in fastboot:-
C:\Android-adb>fastboot devices
???????????? fastboot
C:\Android-adb>fastboot devices
015d078754040a06 fastboot
C:\Android-adb>fastboot flash recovery TWRP.blob
sending 'recovery' (7726 KB)...
OKAY [ 2.795s]
writing 'recovery'...
OKAY [ 1.410s]
finished. total time: 4.207s
C:\Android-adb>fastboot devices
???????????? fastboot
have to physically reboot the prime
C:\Android-adb>fastboot devices
015d078754040a06 fastboot
C:\Android-adb>
I have found a solution to my particular problem on this thread http://forum.xda-developers.com/showthread.php?t=2179759
I am writing this from my now fully functional paperweight!!!
Sent from my Transformer Prime TF201 using XDA Premium HD app

[Q] Bricked s3

So,
I was updating my SIII to Omega 44.2 from omega 44. I did a full wipe and it just hung there doing nothing........so I pulled the battery (I know, right :silly. Anyway I am now stuck on boot loop, I can't get into recovery as my Vol+ doesn't work. I can get into download mode, but can't continue due to not being able to use the Vol+.
If anyone knows a way around this, although I know it is highly unlikely.
Thank you in advance for the ear bashing I am about to recieve.:good:
You should open your phone and try to fix the volume button but you can also acces the download mode via adb reboot download and recovery mode via adb reboot recovery (this one is propably kinda useless since you dont have touch recovery) when you reach the download mode you can just flash stock firmware via odin
btw hit the thanks button if i helped you
AW: [Q] Bricked s3
To me it sounds like a case for service center repair. I'm not used to Usb jigs, but I assume they still need you to press the vol+ button to continue to download mode...
|| Typed with my S4 Octa-Beast or my Note 10.1 ||
himorasi said:
You should open your phone and try to fix the volume button but you can also acces the download mode via adb reboot download and recovery mode via adb reboot recovery (this one is propably kinda useless since you dont have touch recovery) when you reach the download mode you can just flash stock firmware via odin
btw hit the thanks button if i helped you
Click to expand...
Click to collapse
I do have touch recovery, I just can't enter it because of the Vol+.
phatmodder said:
I do have touch recovery, I just can't enter it because of the Vol+.
Click to expand...
Click to collapse
You should really try to fix the volume buttons . Be brave and open the device or else pay someone to fix the buttons nothing else
phatmodder said:
I do have touch recovery, I just can't enter it because of the Vol+.
Click to expand...
Click to collapse
Great so heres guide to reach the recovery mode without hard buttons
1.Download adb and install adb drivers for your phone
2.Extract the files to your c directory in a folder named adb(creat one)
3.Once the files are located in c:\adb go to start menu then search for cmd
4.type in cd c:\adb then click enter
5.type in adb devices it will show the connected devices it should be bunch of numbers
6.if you cant see them it means adb drivers for your device are not installed correctly
7.Now you can reboot to the recovery mode (adb reboot recovery) or download mode (adb reboot download)
you can also use usb jig
http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/
remember to hit the thanks button if i deserve it

Stuck in fastboot with no custom recovery and no os installed.

i cant use adb commands, only fastboot commands and im stuck with using this fastboot update </path/to/your/RomFile.zip>
Which happens as such
C:\adb>fastboot update C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip
archive does not contain 'android-info.txt'
error: update package 'C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip' has no android-info.txt
I've tried many other commands and this is the closest ive gotten. miflash tool also doesnt work as it gets to 100.997% and doesnt complete.
Please i need help.
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
What model phone are you using?
Spudnik said:
What model phone are you using?
Click to expand...
Click to collapse
Xiaomi mi 9t also known as davinci
ValeV008 said:
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
Click to expand...
Click to collapse
I tried these and they say they are finished but im still stuck in fastboot
_Mecha_ said:
I tried these and they say they are finished but im still stuck in fastboot
Click to expand...
Click to collapse
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
ValeV008 said:
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
Click to expand...
Click to collapse
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
_Mecha_ said:
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
Click to expand...
Click to collapse
Did you try to hard shut down the phone?
ValeV008 said:
Did you try to hard shut down the phone?
Click to expand...
Click to collapse
Yes I have tried that
_Mecha_ said:
Yes I have tried that
Click to expand...
Click to collapse
Than the phone is hard bricked and you can do nothing about it. Buy new one.

Question Phone apparently died after trying to install LineageOS Official

I tried to install LineageOS, but after some steps the phone died out of nowhere, now the power button doesnt turn on the phone and I cant access to recovery or fastboot either.
What I did was:
Unlocking bootloader
Going to fastboot
fastboot flash boot LineageRecovery.img
fastboot boot LineageRecovery.img
It didn't went to the lineage recovery and was stuck on fastboot mode, couldn't go to another mode
Tried TWRP
fastboot flash boot TWRPRecovery.img
fastboot boot TWRPRecovery.img
This time it went to TWRP recovery mode (yay)
Tried to adb sideload Lineage rom
Stopped at 40-50% out of nowhere
Tried to factory reset and other stuff, it said some stuff was missing (maybe data or other stuff, I cant remember)
Then I rebooted to system, and it was at that time where everything went blank
Now holding the power button doesnt turn on the phone, neither does holding power button and volume up/down
When the phone is plugged to the PC and I hold the power button + volume up/down the pc makes a sound like I disconnected and connected something, but it doesnt do anything.
Sorry if my english is not the best but please I need help, thank you.
josilher said:
I tried to install LineageOS, but after some steps the phone died out of nowhere, now the power button doesnt turn on the phone and I cant access to recovery or fastboot either.
What I did was:
Unlocking bootloader
Going to fastboot
fastboot flash boot LineageRecovery.img
fastboot boot LineageRecovery.img
It didn't went to the lineage recovery and was stuck on fastboot mode, couldn't go to another mode
Tried TWRP
fastboot flash boot TWRPRecovery.img
fastboot boot TWRPRecovery.img
This time it went to TWRP recovery mode (yay)
Tried to adb sideload Lineage rom
Stopped at 40-50% out of nowhere
Tried to factory reset and other stuff, it said some stuff was missing (maybe data or other stuff, I cant remember)
Then I rebooted to system, and it was at that time where everything went blank
Now holding the power button doesnt turn on the phone, neither does holding power button and volume up/down
When the phone is plugged to the PC and I hold the power button + volume up/down the pc makes a sound like I disconnected and connected something, but it doesnt do anything.
Sorry if my english is not the best but please I need help, thank you.
Click to expand...
Click to collapse
Flashing dtbo.img + vendor_boot.img + boot.img is essential. With custom rom, boot.img will include recovery loss inside.
Aitra said:
Flashing dtbo.img + vendor_boot.img + boot.img is essential. With custom rom, boot.img will include recovery loss inside.
Click to expand...
Click to collapse
I see, but know that my phone is bricked or whatever state it is what do I do
Flash boot_ab boot.img
Flash vendor_boot_ab vendor_boot.img
Flash dtbo dtbo.img
Fastboot reboot recovery
josilher said:
I see, but know that my phone is bricked or whatever state it is what do I do
Click to expand...
Click to collapse
Fastboot -w
josilher said:
I see, but know that my phone is bricked or whatever state it is what do I do
Click to expand...
Click to collapse
To load the original rom, you need to reload the original dtbo.img & vendor_boot.img.
Aitra said:
To load the original rom, you need to reload the original dtbo.img & vendor_boot.img.
Click to expand...
Click to collapse
It's on EDL mode apparently, can I do that on this mode?
No! If in edl mode auth authorized account is required.
After a while using custom rom RIceDroi 8.5 I have returned to Miui14.
Aitra said:
No! If in edl mode auth authorized account is required.
Click to expand...
Click to collapse
Well I don't have an authorized account but I'm 90% sure it is on EDL mode because my pc detects it as Qualcomm QDBLoader so what am I suppose to do. Btw thanks for the fast replying
josilher said:
Well I don't have an authorized account but I'm 90% sure it is on EDL mode because my pc detects it as Qualcomm QDBLoader so what am I suppose to do. Btw thanks for the fast replying
Click to expand...
Click to collapse
Up rom without an authorized account can still be successful if it is not locked alti ronback.
Aitra said:
Up rom without an authorized account can still be successful if it is not locked alti ronback.
Click to expand...
Click to collapse
Can you elaborate further?
I ended up paying to have my phone saved from EDL mode, now it's working

Categories

Resources