i cant use adb commands, only fastboot commands and im stuck with using this fastboot update </path/to/your/RomFile.zip>
Which happens as such
C:\adb>fastboot update C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip
archive does not contain 'android-info.txt'
error: update package 'C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip' has no android-info.txt
I've tried many other commands and this is the closest ive gotten. miflash tool also doesnt work as it gets to 100.997% and doesnt complete.
Please i need help.
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
What model phone are you using?
Spudnik said:
What model phone are you using?
Click to expand...
Click to collapse
Xiaomi mi 9t also known as davinci
ValeV008 said:
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
Click to expand...
Click to collapse
I tried these and they say they are finished but im still stuck in fastboot
_Mecha_ said:
I tried these and they say they are finished but im still stuck in fastboot
Click to expand...
Click to collapse
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
ValeV008 said:
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
Click to expand...
Click to collapse
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
_Mecha_ said:
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
Click to expand...
Click to collapse
Did you try to hard shut down the phone?
ValeV008 said:
Did you try to hard shut down the phone?
Click to expand...
Click to collapse
Yes I have tried that
_Mecha_ said:
Yes I have tried that
Click to expand...
Click to collapse
Than the phone is hard bricked and you can do nothing about it. Buy new one.
Related
ok look heres what i did straight to the point am i soft are hard bricked? I got to 99.99% of the sbf flash then failed I get code 0x1000 Failed to boot cant load OS But But heres the hope I get like 9 options i can put the phone in on this black screen with white writing options like RSD mode Fastboot NvFlash and others to select one i press the up button i ran sbf flash again in Rs mode but it just fails soon as i hit start my question is can this be fixed with sat fastboot adb and if so what file do i use any links thanks and my Atrix was on 2.3.4 4.5.91
Thanks in Advanced
Were you flashing pudding?
nucentury08 said:
ok look heres what i did straight to the point am i soft are hard bricked? I got to 99.99% of the sbf flash then failed I get code 0x1000 Failed to boot cant load OS But But heres the hope I get like 9 options i can put the phone in on this black screen with white writing options like RSD mode Fastboot NvFlash and others to select one i press the up button i ran sbf flash again in Rs mode but it just fails soon as i hit start my question is can this be fixed with sat fastboot adb and if so what file do i use any links thanks and my Atrix was on 2.3.4 4.5.91
Thanks in Advanced
Click to expand...
Click to collapse
live4nyy said:
Were you flashing pudding?
Click to expand...
Click to collapse
yes i was is that right
I'm assuming you were coming from the OTA 2.3.4. Is that right?
If so, then it is a soft brick and you just need to power it down and then plug it back in to the computer and it should turn on by itself. As soon as the menu comes back up, use the VOL down to navigate to Fastboot and then press VOL up to select. Once in Fastboot protocol, you can just reenter the fastboot unlock commands, make sure you enter your uniqueID exactly
nucentury08 said:
yes i was is that right
Click to expand...
Click to collapse
live4nyy said:
I'm assuming you were coming from the OTA 2.3.4. Is that right?
If so, then it is a soft brick and you just need to power it down and then plug it back in to the computer and it should turn on by itself. As soon as the menu comes back up, use the VOL down to navigate to Fastboot and then press VOL up to select. Once in Fastboot protocol, you can just reenter the fastboot unlock commands, make sure you enter your uniqueID exactly
Click to expand...
Click to collapse
can you link me to the fastboot unlock zip
Just download this and use option 3.
http://forum.xda-developers.com/showthread.php?t=1182871
nucentury08 said:
can you link me to the fastboot unlock zip
Click to expand...
Click to collapse
I have an LG Optimus one p500 that's stuck in fastboot mode.
After doing factory reset,phone entered in fastboot mode. After selecting that the phone rebooted but was stuck in Fastboot mode. It's been stuck for 5 days and I can't figure out how to exit fastboot or just reboot regularly.
Methods tried:
-Battery pull then turn on
-Press and Hold Homekey, Powerkey and Volume down when booting
-Run fastboot on my command prompt and reboot, continue or flash command
-Phone is not entering emergency mode
<But they all end in fsatboot mode "Fastboot: Processing Commands" still>
I've tried everything and read everyforum, My questions
1)How can I just reboot my phone regularily! so it's not in fastboot mode?
2) Is there a command prompt for fastboot that willl exit fastboot?
I just want my phone to work normally! Please help, much appreciated!
Please reply fast because my phone's warranty is over.
Most probably, your custom recovery got corrupt
Use this guide: http://forum.xda-developers.com/showthread.php?t=1088046
This will erase the current corrupted recovery and flash the new one.
Use the recovery.img of CWM 5.0.2.0 instead of 5.0.2.7 (Unstable)
EDIT: Download CWM 5.0.2.0 Recovery Image here (Make sure to rename it to "recovery.img")
DJoptimus-One said:
Most probably, your custom recovery got corrupt
Use this guide: http://forum.xda-developers.com/showthread.php?t=1088046
This will erase the current corrupted recovery and flash the new one.
Use the recovery.img of CWM 5.0.2.0 instead of 5.0.2.7 (Unstable)
EDIT: Download CWM 5.0.2.0 Recovery Image here (Make sure to rename it to "recovery.img")
Click to expand...
Click to collapse
Actually,my mobile was not getting recognized by pc.
But after lot of efforts,i have flashed original LG rom.
Now,the problem left is fastboot mode.
I have tried flashing different recoveries and it shows that recovery gets updated.When I entered" fastboot reboot ",then it again entered in fastboot mode.
Then,I entered "reboot recovery" in terminal emulator.Then,it entered in correct recovery mode.So,I feel that Button combo have been changed or I have to disable fastboot mode from some settings or adb(as read in some forum).Can you help me regarding this?
please help
someone please reply here
U most likely pressed something else instead of power+down volume+home
Sent from my LG-P500 using xda premium
puneet9 said:
-Press and Hold Homekey, Powerkey and Volume down when booting
Click to expand...
Click to collapse
You should press home and vol key first and then press power.
Ignore if you do it correctly
Again:
Press and HOLD: Vol DOWN + Home-Key + Power until recovery starts. Home-Key + Power is the combo for Fastboot mode.
Hey
I´ve got the same problem, but when I try install Android SDK it says Java DK isnt installed, which is false cos I have it already instaled..
I checked the Google, but only what I found was information which says " click back, then click next" But it didnt help me.
Can you please help me about this..
P.S. I tried KDZ too but it didnt find my phone..
EDIT: Oh yeah. Solved
KDZ isn't related to fastboot errors anywhere.
http://forum.xda-developers.com/showthread.php?t=1350733
Sent from my LG-P500 using xda premium
U need to set variable for JAVA HOME
Sent from my LG-P500 using xda premium
I've found a way to boot directly into bootloader/fastboot mode.
Press simultaniously the Vol+ and the power button until the red light lit up. Then instantly leave the two buttons and press the Vol- button until you see the fastboot menu. You're done!!
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Boutchoo said:
This trick to boot into Stock Bootloader/recovery has been known for years and is used on many different Android device
Still, it's great that you participate in this forum !
Click to expand...
Click to collapse
I see you don't get it. Up to now the only way to get into fastboot was via "adb reboot bootloader". Or from a successfully installed TWRP.
The "for years" known combinations will get you only into Recovery (Power + Vol up), FTM (Power + Vol down), or into EDL respective the useless DFU mode (Power + Vol up + Vol down). In case you've killed your recovery and your bootimg you now have a additional option to come back to a functional system. Especially for the A2017g with the useless DFU mode.
Can anyone with bricked A2017G confirm?
Controllerboy said:
Can anyone with bricked A2017G confirm?
Click to expand...
Click to collapse
Confirmed NOT WORKING .
It doesn't matter if it's working or not. Thanks for the info anyway.
Neither stock recovery nor fastboot will help if you're stuck in DFU mode for G model. You can't do anything to recover the device in neither mode. All what helps is previously had enabled "allow BL unlock" in developer options. This gives you the possibilty to flash a stock ROM from external SD card. It still needs to be aproved from a bricked "DFU" user!
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
Would you kindly tell us what is not working? Don't you see the menu? Or don't you know what to do with fastboot?
In case you managed it to get into fastboot the next step would be to get into edl by using this trick. -->
http://forum.xda-developers.com/and.../guide-how-to-reboot-to-edl-fastboot-t3394292
@tron1, all this does not work. I tried cause I had a bricked (DFU) device. I needed to send it in for repair. And gues: they changed the motherboard.
Even the fastboot_edl results in "remote unknown command". Nearly all commands in fastboot for Axon 7 are disabled bei ZTE.
I will try if it's possible to reboot to edl with the fastboot from the unlock procedure from drakenfx.
forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165
ZTE crippled the loader in a bad ass way. But they left the flash command inside. So it should be possible to flash at least a working recovery to the system if you manage it to get into bootloader. As long as my phone is working I won't try it on it. So volunteers!!
Hint -->
fastboot flash <partition> [ <filename> ] write a file to a flash partition
fastboot erase <partition> erase a flash partition
I there a way recover such a bricked device?
I could only boot into bootloader. If i choose boot recovery the phone only shows a red light.
If i choose start its the same red light.
Or should i contact ZTE for a new phone?
Stoicho87 said:
Confirmed NOT WORKING .
Click to expand...
Click to collapse
I have bricked my Axon 7 several times this weekend, but new Qualcomm chipsets are unbrickable!!!!
1. There is a way to enter directly to EDL on most Qualcomm devices and works also in the Axon 7. Just ensure your phone is off, then press the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, otherwise the phone will turn on.
2. Plug your phone to your computer. Windows 10 should detect a new USB device QUSB_BULK without any warning message. Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TWRP).
After that, you will be able to enter into recovery, do a factory reset and then you will be able to restore de initial image from an SD formatted as FAT32 (no, exFAT is not supported by stock recovery) in case of stock recovery. Sideload will not work, always stop before finishing the transmission.
Oki, this is fine for you because you have the US version of the Axon the rest of the axon World is f..ed up with an useless so called DFU mode. Happy Birthday for your Axon.
Sent from my ZTE A2017G using XDA Free mobile app
Oki said:
... unbrickable!!!! ...
... ress the three buttons at the same time. The red light will blink once, after that blink release the three buttons (you must be very quick releasing the buttons, o ...
... Then you can use axon7tool to flash the original boot and recovery (stock or tenfar's signed TW ...
Click to expand...
Click to collapse
That did the trick. Thanks
Any idea on why when i tried to enter bootloader mode on my Axon 7 (that i received 1 week ago), it stays on ZTE logo and nothing else happens... What is weirder is that there's a red light and my computer detect it when i do "fastboot devices" but i can't unlock the bootloader...
I tried to downgrade on B02 firmware and nothing... i'm beyond going insane right now.... :-/ It's like ZTE blocked on purpose the access to the bootloader mode...
hello today i tried to root my phone with twrp i did everything and didnt manage to root so decided to wipe data with twrp everything was looking fine before i reboot my phone everytime i reboot it loads to twrp logo and doesnt go further i tried to load into fastboot & recovery mode but its not working what should i do
kloarn said:
hello today i tried to root my phone with twrp i did everything and didnt manage to root so decided to wipe data with twrp everything was looking fine before i reboot my phone everytime i reboot it loads to twrp logo and doesnt go further i tried to load into fastboot & recovery mode but its not working what should i do
Click to expand...
Click to collapse
install a compatible TWRP
Download here
and continue the process. That should help.
kloarn said:
i tried to load into fastboot & recovery mode
Click to expand...
Click to collapse
Turn off your phone, press and hold Vol Up and plug in cable.
-Alf- said:
Turn off your phone, press and hold Vol Up and plug in cable.
Click to expand...
Click to collapse
nothing happens
kloarn said:
nothing happens
Click to expand...
Click to collapse
Sorry, typo , turn off your phone, press and hold Vol Down and plug in cable.
-Alf- said:
Sorry, typo , turn off your phone, press and hold Vol Down and plug in cable.
Click to expand...
Click to collapse
nothing happened again
kloarn said:
nothing happened again
Click to expand...
Click to collapse
Try enter eRecovery - turn off, conect to PC, press and hold Power & Vol Up. In eRecovery select "Download latest etc etc).
(You need Wi-Fi).
-Alf- said:
Try enter eRecovery - turn off, conect to PC, press and hold Power & Vol Up. In eRecovery select "Download latest etc etc).
(You need Wi-Fi).
Click to expand...
Click to collapse
it loads twrp logo nothing more
kloarn said:
it loads twrp logo nothing more
Click to expand...
Click to collapse
Do you have TWRP installed instead of Recovery or eRecovery?
-Alf- said:
Do you have TWRP installed instead of Recovery or eRecovery?
Click to expand...
Click to collapse
i think twrp is installed to eRecovery
can you help me from discord ?
kloarn said:
i think twrp is installed to eRecovery
Click to expand...
Click to collapse
kloarn said:
i think twrp is installed to eRecovery
Click to expand...
Click to collapse
Okay, try the following: turn off, press and hold Power and both Volume buttons, what will happen ...
-Alf- said:
Okay, try the following: turn off, press and hold Power and both Volume buttons, what will happen ...
Click to expand...
Click to collapse
stuck on your device has been unlocked and can't be trusted your device is booting now
kloarn said:
stuck on your device has been unlocked and can't be trusted your device is booting now
Click to expand...
Click to collapse
Game over,imo. No fastboot, no eRecovery, no dload method... Try testpoint methode with board software, DC-phoenix or service center.
adb is working maybe it will help :/
-Alf- said:
Game over,imo. No fastboot, no eRecovery, no dload method... Try testpoint methode with board software, DC-phoenix or service center.
Click to expand...
Click to collapse
hi again i managed to get on to fastboot & recovery mode now cmd commands not working it says waiting for device and bootloader gives error code that says coldboot 16
okay i managed to get in to eRecovery and now its installing the package thank you for your help
kloarn said:
okay i managed to get in to eRecovery and now its installing the package thank you for your help
Click to expand...
Click to collapse
No problem.
I tried to install LineageOS, but after some steps the phone died out of nowhere, now the power button doesnt turn on the phone and I cant access to recovery or fastboot either.
What I did was:
Unlocking bootloader
Going to fastboot
fastboot flash boot LineageRecovery.img
fastboot boot LineageRecovery.img
It didn't went to the lineage recovery and was stuck on fastboot mode, couldn't go to another mode
Tried TWRP
fastboot flash boot TWRPRecovery.img
fastboot boot TWRPRecovery.img
This time it went to TWRP recovery mode (yay)
Tried to adb sideload Lineage rom
Stopped at 40-50% out of nowhere
Tried to factory reset and other stuff, it said some stuff was missing (maybe data or other stuff, I cant remember)
Then I rebooted to system, and it was at that time where everything went blank
Now holding the power button doesnt turn on the phone, neither does holding power button and volume up/down
When the phone is plugged to the PC and I hold the power button + volume up/down the pc makes a sound like I disconnected and connected something, but it doesnt do anything.
Sorry if my english is not the best but please I need help, thank you.
josilher said:
I tried to install LineageOS, but after some steps the phone died out of nowhere, now the power button doesnt turn on the phone and I cant access to recovery or fastboot either.
What I did was:
Unlocking bootloader
Going to fastboot
fastboot flash boot LineageRecovery.img
fastboot boot LineageRecovery.img
It didn't went to the lineage recovery and was stuck on fastboot mode, couldn't go to another mode
Tried TWRP
fastboot flash boot TWRPRecovery.img
fastboot boot TWRPRecovery.img
This time it went to TWRP recovery mode (yay)
Tried to adb sideload Lineage rom
Stopped at 40-50% out of nowhere
Tried to factory reset and other stuff, it said some stuff was missing (maybe data or other stuff, I cant remember)
Then I rebooted to system, and it was at that time where everything went blank
Now holding the power button doesnt turn on the phone, neither does holding power button and volume up/down
When the phone is plugged to the PC and I hold the power button + volume up/down the pc makes a sound like I disconnected and connected something, but it doesnt do anything.
Sorry if my english is not the best but please I need help, thank you.
Click to expand...
Click to collapse
Flashing dtbo.img + vendor_boot.img + boot.img is essential. With custom rom, boot.img will include recovery loss inside.
Aitra said:
Flashing dtbo.img + vendor_boot.img + boot.img is essential. With custom rom, boot.img will include recovery loss inside.
Click to expand...
Click to collapse
I see, but know that my phone is bricked or whatever state it is what do I do
Flash boot_ab boot.img
Flash vendor_boot_ab vendor_boot.img
Flash dtbo dtbo.img
Fastboot reboot recovery
josilher said:
I see, but know that my phone is bricked or whatever state it is what do I do
Click to expand...
Click to collapse
Fastboot -w
josilher said:
I see, but know that my phone is bricked or whatever state it is what do I do
Click to expand...
Click to collapse
To load the original rom, you need to reload the original dtbo.img & vendor_boot.img.
Aitra said:
To load the original rom, you need to reload the original dtbo.img & vendor_boot.img.
Click to expand...
Click to collapse
It's on EDL mode apparently, can I do that on this mode?
No! If in edl mode auth authorized account is required.
After a while using custom rom RIceDroi 8.5 I have returned to Miui14.
Aitra said:
No! If in edl mode auth authorized account is required.
Click to expand...
Click to collapse
Well I don't have an authorized account but I'm 90% sure it is on EDL mode because my pc detects it as Qualcomm QDBLoader so what am I suppose to do. Btw thanks for the fast replying
josilher said:
Well I don't have an authorized account but I'm 90% sure it is on EDL mode because my pc detects it as Qualcomm QDBLoader so what am I suppose to do. Btw thanks for the fast replying
Click to expand...
Click to collapse
Up rom without an authorized account can still be successful if it is not locked alti ronback.
Aitra said:
Up rom without an authorized account can still be successful if it is not locked alti ronback.
Click to expand...
Click to collapse
Can you elaborate further?
I ended up paying to have my phone saved from EDL mode, now it's working