Related
I had tried to flash the stock webtop on my atrix 4g, after i had done the webtop mod(due to the screen presses from the phone would not work, and it also would not allow me to have the normal functionality and so i wanted to go back to stock for webtop). Not too sure if I'm able to post the link to where i found the instructions, but i did get it from atrix forums.
But pretty much now, when i turn my phone on, it gets stuck on the Motorola screen with text saying...
Failed to boot 4
Starting RSD Mode
I did read up and saw that from my POV, the best thing would be to get the stock sbf and use RSD Lite and flash it back to the beginning. But a few things do come up,
I found a thread in XDA where it had all the sbf i could want, but they were uploaded into filesonic which will not let me download it.
Would this be the only option for me to go?
Also some background into phone, AT&T Atrix 4g, was running 2.3.4, firmware 4.5.91 and was rooted. Any enlightenment on my pridicament would be much appreciated. Thank you for your time in reading.
First, did you have an unlocked bootloader?
If not, that's your problem.
Second, is there an option to get into recovery?
If so, try to perform a "Factory Reset" within the recovery before trying to use RSD lite (not recommended).
Dilphat said:
I had tried to flash the stock webtop on my atrix 4g, after i had done the webtop mod(due to the screen presses from the phone would not work, and it also would not allow me to have the normal functionality and so i wanted to go back to stock for webtop). Not too sure if I'm able to post the link to where i found the instructions, but i did get it from atrix forums.
But pretty much now, when i turn my phone on, it gets stuck on the Motorola screen with text saying...
Failed to boot 4
Starting RSD Mode
I did read up and saw that from my POV, the best thing would be to get the stock sbf and use RSD Lite and flash it back to the beginning. But a few things do come up,
I found a thread in XDA where it had all the sbf i could want, but they were uploaded into filesonic which will not let me download it.
Would this be the only option for me to go?
Also some background into phone, AT&T Atrix 4g, was running 2.3.4, firmware 4.5.91 and was rooted. Any enlightenment on my pridicament would be much appreciated. Thank you for your time in reading.
Click to expand...
Click to collapse
unlocked bootloader, that would be a negative. I guess that was what happened as to why i'm in this situation. But trying to get it back to factory settings, when i turn on the phone and hold down power button and vol down, it shows the Motorolla screen, i keep holding it down...it never shows the option for fast boot or the menu to change to be able to get it back to factory. Unless I'm doing it wrong, but it goes to Motorola screen then waits a bit and then screen turns off. Any ideas? If RSD Lite is not recommended, what's a good try to take? thanks for replying back quite fast.
Just to confirm the steps:
1. Press and hold the volume down button
2. Then press the power button (note: you don't need to continue holding the power button when doing this)
3. Continue holding the volume down button until it says "Fastboot"
If that's what you did then that would be correct. Actually, try just booting it normally and see if it gives you any options while booting.
Dilphat said:
unlocked bootloader, that would be a negative. I guess that was what happened as to why i'm in this situation. But trying to get it back to factory settings, when i turn on the phone and hold down power button and vol down, it shows the Motorolla screen, i keep holding it down...it never shows the option for fast boot or the menu to change to be able to get it back to factory. Unless I'm doing it wrong, but it goes to Motorola screen then waits a bit and then screen turns off. Any ideas? If RSD Lite is not recommended, what's a good try to take? thanks for replying back quite fast.
Click to expand...
Click to collapse
When I let it boot up without pressing anything, it just says
"Failed to boot 4"
"Starting RSD mode"
When i hold down vol down button for a bit nothing. I did notice though if i press the vol down button directly after i get "failed to boot 4" it blinks something real quick and then the screen goes black(which then i would have to take out the battery and put the batter back in). ...but what flashes, i believes says nvflash.
If i press volume up button after it says "Failed to boot 4" it gives me..
"Starting Fastboot protocal support"
So with no touch, "Starting RSD mode".
Vol down, I think it says nvflash
Vol up, Starting fastboot protocal support.
Well, when it says "Starting Fastboot protocol support" it means it is in fastboot but I don't know for sure what you could do from other than "fastboot -w" which would erase userdata and cache. Do you have the fastboot files? Have you thought about trying to flash Pudding if you can get it into RSD mode? You could then flash a custom recovery in fastboot from that point and either try to factory reset or flash a custom rom/fruitcake.
Dilphat said:
When I let it boot up without pressing anything, it just says
"Failed to boot 4"
"Starting RSD mode"
When i hold down vol down button for a bit nothing. I did notice though if i press the vol down button directly after i get "failed to boot 4" it blinks something real quick and then the screen goes black(which then i would have to take out the battery and put the batter back in). ...but what flashes, i believes says nvflash.
If i press volume up button after it says "Failed to boot 4" it gives me..
"Starting Fastboot protocal support"
So with no touch, "Starting RSD mode".
Vol down, I think it says nvflash
Vol up, Starting fastboot protocal support.
Click to expand...
Click to collapse
So what are the chances of me getting a hard brick if i did the RSD Lite as what was proposed in other occurences?
Also with pudding, do I need anything done special on the phone...unlock bootloader or anything else? just want to make sure, since i don't want to be in this situation again or worse lol.
Also, what do you mean by if i have the fastboot files? such as the ones i used to root the phone?
There's really no measurement of risk for using RSD lite. If used properly it should go without a hitch but there have been "rare" occurrences of things going wrong. If you can find the correct sbf(2.3.4-4.5.91 signed) and download the current RSD then you should be fine
Pudding is the unlocked bootloader.
Fastboot files is what is needed to give commands in fastboot mode. (eg. "fastboot.exe")
Dilphat said:
So what are the chances of me getting a hard brick if i did the RSD Lite as what was proposed in other occurences?
Also with pudding, do I need anything done special on the phone...unlock bootloader or anything else? just want to make sure, since i don't want to be in this situation again or worse lol.
Also, what do you mean by if i have the fastboot files? such as the ones i used to root the phone?
Click to expand...
Click to collapse
is it that hard to find a signed sbf for 2.3.4 4.5.91 at&t?
Also, what would be the benefits of going the pudding way versus if i just attempt the rsd way?
which one is safer? lol
Pudding, in a sense, is safer as it will unlock your bootloader and you can flash ROMs all day with a custom recovery but it would help to have the appropriate knowledge before diving in. You mentioned you had rooted your phone but what else, as far as modding, are you familiar with?
I actually tried to find an sbf to link to for you but couldn't find one.
Dilphat said:
is it that hard to find a signed sbf for 2.3.4 4.5.91 at&t?
Also, what would be the benefits of going the pudding way versus if i just attempt the rsd way?
which one is safer? lol
Click to expand...
Click to collapse
well this atrix 4g is my first android based phone. As far as modding, i came from the winmo scene. from a fuze to tilt 2 to this atrix. thanks for actually trying to look for a sbf, i was able to find one not on filesonic...
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
but just not sure if it is the appropriate one needed. also, while i was at work, i did try and see what i could find on pudding and found a thread in regards to it, but nothing too much in detail about it. except for a if you don't understand any of the top 3 reasons then do this lol.
live4nyy said:
Pudding, in a sense, is safer as it will unlock your bootloader and you can flash ROMs all day with a custom recovery but it would help to have the appropriate knowledge before diving in. You mentioned you had rooted your phone but what else, as far as modding, are you familiar with?
I actually tried to find an sbf to link to for you but couldn't find one.
Click to expand...
Click to collapse
And what i'm getting when looking up pudding is this...
http://forum.xda-developers.com/showthread.php?t=1136261
and it looks like i still have to run rsd lite o_0, i'm so confused lol
Dilphat said:
well this atrix 4g is my first android based phone. As far as modding, i came from the winmo scene. from a fuze to tilt 2 to this atrix. thanks for actually trying to look for a sbf, i was able to find one not on filesonic...
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
but just not sure if it is the appropriate one needed. also, while i was at work, i did try and see what i could find on pudding and found a thread in regards to it, but nothing too much in detail about it. except for a if you don't understand any of the top 3 reasons then do this lol.
Click to expand...
Click to collapse
Failed to boot 4
Just in case someone else get's this error.
I used this sbf. at&t signed 2.3.4 4.5.91
http://www.4shared.com/archive/viniGE9x/1FF-olympus-user-234-4591-1106.html
and RSD Lite v5.6
From there when phone got to the motorola screen and said
"Failed to boot 4"
"Starting RSD Mode"
ran RSD with the sbf, it went through it's thing and it worked. it did revert everything that was done when the phone was rooted, and there is no root.
BTW, thanks for the help live4nyy!
live4nyy said:
There's really no measurement of risk for using RSD lite. If used properly it should go without a hitch but there have been "rare" occurrences of things going wrong. If you can find the correct sbf(2.3.4-4.5.91 signed) and download the current RSD then you should be fine
Pudding is the unlocked bootloader.
Fastboot files is what is needed to give commands in fastboot mode. (eg. "fastboot.exe")
Click to expand...
Click to collapse
edit* got the phone rooted again. now my problem is, webtop is gone lol. any thoughts on how to reinstall it?
Weird, the SBF file should of had that included. How big(MB) was the SBF file?
Dilphat said:
edit* got the phone rooted again. now my problem is, webtop is gone lol. any thoughts on how to reinstall it?
Click to expand...
Click to collapse
after extracted it is 1.46gb
live4nyy said:
Weird, the SBF file should of had that included. How big(MB) was the SBF file?
Click to expand...
Click to collapse
That sounds about right. How are you trying to access webtop? Do you have a lapdock or are you trying to just plug it into a monitor with the HDMI cable?
Dilphat said:
after extracted it is 1.46gb
Click to expand...
Click to collapse
I just figured out what i did wrong, i didn't have my hd multimedia dock plugged in lol
live4nyy said:
That sounds about right. How are you trying to access webtop? Do you have a lapdock or are you trying to just plug it into a monitor with the HDMI cable?
Click to expand...
Click to collapse
Major "derpage"...
Glad you got it working.
Dilphat said:
I just figured out what i did wrong, i didn't have my hd multimedia dock plugged in lol
Click to expand...
Click to collapse
I know right, and yup...I'm glad I got it working as well. but yup, in case it happens to anyone else, i put up the link to the sbf. just in case lol.
Now this gives me time to read up into unlocking the bootloader and flashing roms
live4nyy said:
Major "derpage"...
Glad you got it working.
Click to expand...
Click to collapse
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
RaiderDuck said:
You'll probably need to flash a new recovery partition. Check out this thread:
http://forum.xda-developers.com/showthread.php?t=1950307
Click to expand...
Click to collapse
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
ergotelis said:
Thanks, but the problem is that this guy can get into the recovery with powering up+holding volume down button, if i understood well.but I can't!
Click to expand...
Click to collapse
flasing a recovery is done via fastboot so you don't have to enter recovery but fastboot (hold power and volume down till it shows fastboot, then press up) .
look at this post: http://forum.xda-developers.com/showpost.php?p=33137046&postcount=10
Fix
ergotelis said:
Hi there guys, first of all thank you all so much for the support here.
I have a problem with my atrix, i googled a lot before posting, but i still can't find a solution:
I have a atrix 4G, unlocked, was running successfully neutrino 2,8 version.
After 2 months of being (almost) fully functional, the phone crashed(i didn't do anything particular at that time, i think that i was browsing google maps) suddenly and now i have continuous boot loop, i get only the classic red dual core logo, with the "unlocked" notification over it, and then after 10-15 sec it reboots.
I try to open it with holding volume down, to enter recovery, nothing happens. It reboots again. The computer doesn't see it, in this case.
I reboot it with holding volume up, says "starting RSD protocol suppport", and pc sees it and i get the cling-clong sound of usb.
I would do the recovery using rsd, but i read that it is not for unlocked devices, is this so? What can i do in this case? Thanks a lot!!!
Click to expand...
Click to collapse
hello i had this problem yesterday, it happens in neutrino rom to alot of people!
and btw i could not open recovery either
ill explain what i had to do
i had to use moto-fastboot and install a new recovery, basically your recovery is dead and your rom is unbootable
heres the steps
download the moto drivers and install
http://forum.xda-developers.com/attachment.php?attachmentid=1381183&d=1349549067
then download the motofastboot zip http://forum.xda-developers.com/attachment.php?attachmentid=1381414&d=1349555102
and create a new folder in C: (computer) called Android and then drag the files from the moto zip into android
Then download a new recovery http://www.mediafire.com/?6ww8wrjrdqq9m97
place the recovery.img into the android folder
now you have all the files needed to reflash your new recovery and fix your phone the whole idea is to reinstall recovery so you can access it and wipe and install the rom fresh again
now you need to do these steps
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
4) On your PC click the Start menu, then in the search box type "cmd"
5) In the command prompt type the following commands (no quotes, hit enter after each command)
6a) "cd c:/android"
6b) "moto-fastboot devices"
your CMD promt should show something like this
C:\Users\Me>cd c:/android
c:\Android>fastboot devices
TA20703SX9 fastboot
c:\Android>
now if that has all worked type the following phrases
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-clockwork-6.0.1.4-maguro.img
moto-fastboot reboot
now the phone should reboot, unplug the usb and pull battery out.
put battery back in and then try to boot into recovery like you normally would (power button + Vol Down)
and your new recovery should load!
from here you can wipe your whole system which i would reccomended as your current one is corrupt and install a new rom or reflash your current on onto a clean wipe. if you dont understand how to clean wipe do all of these steps, factory reset, clear cache, clean dalvik cache then go to mounts > storage and format data + format cache + format system
now install new rom and let it boot up, should bootloop a couple of times then start! if not unplug battery from phone and ask for further assitance
Pixelguy said:
1) Attach your phone to the PC via USB (use a port closest to the power supply)
2) Reboot phone while holding volume down until you see "fastboot"
3) Press volume up to initiate fastboot
Click to expand...
Click to collapse
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
ergotelis said:
Thank you for your help, the problem is exactly here, i put on the usb, i power up the phone by pressing the volume down, and the phone does nothing,doesn't show the fastboot,and after 10-15 secs starts rebooting again. This is my problem!
The only response from my phone is when powering up, and pressing the volume up, it says "starting rsd protocol support"
Is there any case that my volume down is dead?
Click to expand...
Click to collapse
unplug usb
remove battery, then put battery back in make sure phone off (no green light)
then hold power button and vol down at the same time for a few seconds
Fastboot should appear in white writing then press up volume and it should say starting rsd protocal or something similiar
then plug in usb and follow the steps i have written above
i do exactly what you said, but doesn't show fastboot. from switched off, if i press volume up with power button, i see the message "starting rsd protocol support" .but no fastboot option!
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
jorno88 said:
Is there any chance that you can access adb after bootscreen? than you can use "adb reboot recovery" to get there...
Click to expand...
Click to collapse
When i start up phone, the only combination possible to stop restarting is by pressing power+vol up to show that with RSD. There is no other option then selectable. Power + volume down does not work, doesn't show anything, has anyone of you experienced this thing?
If the only working option you have is RSD, then I'm afraid you're stuck with having to flash a stock SBF. I hope you know/remember exactly what stock version you had installed before any modding or flashing, because the SBF has to match exactly. Choose wisely and read up as much as you can before flashing.
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
I will later also try to open it, to see if the side button "volume down" is not working,.
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
ergotelis said:
I have over a year now with custom roms, and i can't remember which version i had. Why do i have to find exactly the version that i had? The latest stock version won't work with rsd? It will make it hard brick?If i manage at least to recover the fastboot menus etc it would be great!
Click to expand...
Click to collapse
Yes, flashing a wrong SBF will most likely hardbrick your device.
ergotelis said:
I have another question, in your moto atrix, if you press on startup power+vol up, are you also seeing the "starting RSD" etc option??
Click to expand...
Click to collapse
Can't try right now, but as far as I know, yes, that is a standard way to enter RSD mode.
thank you, so, i know that at least my phone responds to some instructions.
Is there anyone else to suggest me to do anything else?
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
ergotelis said:
IN rsd mode, (other than flashing a stock random rom with chance of hardbricking,)the phone can be read by usb, can i do anything there?
Click to expand...
Click to collapse
Sadly no. The RSD mode can only ever be used to flash SBFs. That's it. Nothing less, nothing more.
I will now try to open it to see if vol down is not working well. If it does work, i will select a stock rom 1 year old and i will flash it using rsd, and whatever happens....:good:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
try this
ergotelis said:
I disassembled the phone, the button seems to operate fine(?).
I flashed with RSDlite the 2.3.6 version, the RSD stuck to waiting for phone to restart.
The phone restarted, the "unlocked" logo disappeared.
Starts normally, passes the red motorola logo, shows the graphic of AT&T, and after ~10sec starts restarting again. Bootloop again!
At boot, pressing power+vol up, i can still get the RSD support. Pressing power+vol down does nothing, I don't see any error messages, like the ones in hard brick.
What can i do now, any ideas please!!!
Click to expand...
Click to collapse
Yesterday I had a hard time getting my phone into fastboot mode, after loading a bad SV kernel,it only wanted to start the RSD protocol mode. I eventually got into fastboot by plugging into the wall charger, then removing and installing the battery while holding the vol button. When fastboot appears, unplug the charger to allow sd access.
Thanks for the suggestion, i tried even this,it didn't work. The funny thing is that it shows the battery charging level full screen if i connect the charger, as it starts.
I noticed also that when i press vol down now, it takes longer to start and continue to the moving red logo, it stays for a while stable red,feels like it is thinking whether to start or not lol (if i don't press vol down, on the power up the red moto logo immediately starts the classic "waving" effects)
Anyone having any kind of suggestion?I guess you don't, right?
guys, I accidentally format system1 on BMM and cause system unbootable.
I can't reach AP Fastboot menu too. The only thing I could see is blue "Android system recovery" menu. What should I do to get back AP fastboot menu?
I am using GSM version of Razr XT910
Please help.
lkthomas said:
guys, I accidentally format system1 on BMM and cause system unbootable.
I can't reach AP Fastboot menu too. The only thing I could see is blue "Android system recovery" menu. What should I do to get back AP fastboot menu?
I am using GSM version of Razr XT910
Please help.
Click to expand...
Click to collapse
I think I did it wrong, now I see AP mode!
lkthomas said:
I think I did it wrong, now I see AP mode!
Click to expand...
Click to collapse
hold power + volume down + volume up button, it will turn off your phone, hold those buttons again, it will show a bootloader, go to the AP fastboot mode, download the file given and flash it with rsd lite
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
the file are large, so wait patiently if you are having a slow internet conncection
anyway, i saw many people have problems and post it in this thread without searching, so if you have any problems, search or google it to find answers
TheMrcool212 said:
hold power + volume down + volume up button, it will turn off your phone, hold those buttons again, it will show a bootloader, go to the AP fastboot mode, download the file given and flash it with rsd lite
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
the file are large, so wait patiently if you are having a slow internet conncection
anyway, i saw many people have problems and post it in this thread without searching, so if you have any problems, search or google it to find answers
Click to expand...
Click to collapse
Thanks, I forget there is a shortcut key to enter AP mode. Now everything is fine.
When I click power + volume keys (-, +, and both) nothing happens, 10 seconds later motorola logo appears for 2 seconds and then shuts down again.
Can you give more info?
1. Is your battery charged
2. Did you tried to flash stock roms with RSD, if you did, tell which xml you tried to install.
turffe said:
Can you give more info?
1. Is your battery charged
2. Did you tried to flash stock roms with RSD, if you did, tell which xml you tried to install.
Click to expand...
Click to collapse
1. Was charged 80-90% when it bricked. I cant see how many battery is remaining but if i see the moto logo, something have to have.
2. I need the bootloader before trying that. The RSD doesn't detect my phone.
Hi all,
I have Motorola XT621 Primus, after some playings with it and trying to root and add RTL patching i got a brick.
Now the status is that i have fastboot mode working but bootloader is locked, no recovery working and no ADB working, no boot too.
I tryed many ways to flash or unlock bootloader but nothing works. Any commands like fstboot oem got output like (...)
Is there any way to unlock bootloader via fastboot and flash new rom or it completely bricked?
Thanks!
abutreca said:
1. Was charged 80-90% when it bricked. I cant see how many battery is remaining but if i see the moto logo, something have to have.
2. I need the bootloader before trying that. The RSD doesn't detect my phone.
Click to expand...
Click to collapse
Ok first hold the two volume buttons then push and release the power button. Then click on bp tools and see if the logo comes and than goes to the battery thing. Or try to just go into the same place and say normal boot. If all else fails do a fast boot. and use the droid razr root utility to restore back to stock. Let me know if any of this helps or you have questions.
abutreca said:
When I click power + volume keys (-, +, and both) nothing happens, 10 seconds later motorola logo appears for 2 seconds and then shuts down again.
Click to expand...
Click to collapse
Try this exactly to get into fastboot mode...
Power off phone
Press and hold volume down and power button
When the screen flickers release only the power button.
If you can get into fastboot you can use Matt's DROID utility to flash OEM Jellybean Rom onto it in an attempt to resurrect.
LordGarth said:
Try this exactly to get into fastboot mode...
Power off phone
Press and hold volume down and power button
When the screen flickers release only the power button.
If you can get into fastboot you can use Matt's DROID utility to flash OEM Jellybean Rom onto it in an attempt to resurrect.
Click to expand...
Click to collapse
No need, i had the warranty and they fixed it, also changed battery and the cover for the MS/SIM. I was lucky.
i cant use adb commands, only fastboot commands and im stuck with using this fastboot update </path/to/your/RomFile.zip>
Which happens as such
C:\adb>fastboot update C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip
archive does not contain 'android-info.txt'
error: update package 'C:\Users\RUsla\Desktop\xiaomi.eu_multi_HMK20MI9T_V10.3.15.0.PFJCNXM_v10-9.zip' has no android-info.txt
I've tried many other commands and this is the closest ive gotten. miflash tool also doesnt work as it gets to 100.997% and doesnt complete.
Please i need help.
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
What model phone are you using?
Spudnik said:
What model phone are you using?
Click to expand...
Click to collapse
Xiaomi mi 9t also known as davinci
ValeV008 said:
FInd TWRP for your phone and flash it to recovery via fastboot (command "fastboot flash recovery twrp.img")
Find stock ROM for your phone and flash it via fastboot (commant "fastboot flash boot android.img")
Click to expand...
Click to collapse
I tried these and they say they are finished but im still stuck in fastboot
_Mecha_ said:
I tried these and they say they are finished but im still stuck in fastboot
Click to expand...
Click to collapse
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
ValeV008 said:
What do you mean "stuck in boot". You can hard reset the phone (I don't know the combination for your phone, but mine is hold power button + volume up + volume down, then release and press power button again. Google it up for your phone), and go to TWRP by some other combination of buttons. (TWRP is in FOTA kernel, so make sure you google that correctly and get the right combination of buttons).
Click to expand...
Click to collapse
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
_Mecha_ said:
No matter what button combination I use or fastboot command I use all that shows on my screen is the fastboot logo
Click to expand...
Click to collapse
Did you try to hard shut down the phone?
ValeV008 said:
Did you try to hard shut down the phone?
Click to expand...
Click to collapse
Yes I have tried that
_Mecha_ said:
Yes I have tried that
Click to expand...
Click to collapse
Than the phone is hard bricked and you can do nothing about it. Buy new one.