Urgent help needed guys. :crying:
I installed an unofficial CM10 port on the second system of the BootMenu, and got a bootloop upon restarting.
Now, after I boot into stock recovery, select the AP Fastboot and try to flash from RSDLite, i get this error
"cdt.bin" (flash "cdt.bin" -> Phone returned FAIL
I was running the EU ICS leak on the first system before that.
Please tell me what to do, I'm badly stuck. Its really an emergency.
Is there an CM10 build for the Razr?
You tried to wipe Data in Stock Recovery first, before you use RSD? (I guess it won't help much)
You're not able to boot into BM Recovery, right?
The Boot Menu shows and warning, before you rebooted your device, why did you boot?
You now got an CDMA Rom on your RazR (not even sure, if it's an RazR Rom)
That's not easy to fix i think. When RSD won't work it's strange. Your RazR is an EU Device?
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
Is there an CM10 build for the Razr?
You tried to wipe Data in Stock Recovery first, before you use RSD? (I guess it won't help much)
You're not able to boot into BM Recovery, right?
The Boot Menu shows and warning, before you rebooted your device, why did you boot?
You now got an CDMA Rom on your RazR (not even sure, if it's an RazR Rom)
That's not easy to fix i think. When RSD won't work it's strange. Your RazR is an EU Device?
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for replying.
I installed the RAZR CM10(DHacker's unofficial, it was CDMA now i realize) in SECOND system, so the hijack was still intact. It didn't give me a warning before rebooting!
My razr is asia retail, but was working perfectly fine on EU leak.
I really hope there is a way to get out of this. :crying:
You have edited the Updater Script before?
Anyway, you tried one of this.
http://forum.xda-developers.com/showthread.php?p=29221488
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
You have edited the Updater Script before?
Anyway, you tried one of this.
http://forum.xda-developers.com/showthread.php?p=29221488
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
But how will this work? When I try to flash sbf in RSDLite, it gives this error
"cdt.bin" (flash "cdt.bin" -> Phone returned FAIL)
When I try to access the stock recovery and try to flash a ROM through external SD, it gives this error
" error in /tmp/sideload/package.zip
(Status 7)"
cdt.bin is an signature failure like you get, when you flash an wrong region rom or try to downgrade.
If you're in Bad trouble you got an higher secure level now. But I'm not sure, if it really can happen through an Custom Rom?
Never faced such an Problem by using an Custom Rom, so I guess it's an Region problem.
What can you lose by trying one of these Roms? I read the Thread and it seems that this are full flash Roms. So they will delete everything on your RazR (even the internal SD)
Gesendet von meinem XT910 mit Tapatalk 2
BTW: Which Rom you tried to flash with RSD?
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
cdt.bin is an signature failure like you get, when you flash an wrong region rom or try to downgrade.
If you're in Bad trouble you got an higher secure level now. But I'm not sure, if it really can happen through an Custom Rom?
Never faced such an Problem by using an Custom Rom, so I guess it's an Region problem.
What can you lose by trying one of these Roms? I read the Thread and it seems that this are full flash Roms. So they will delete everything on your RazR (even the internal SD)
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
YOU WERE RIGHT!
The fastboot of my region worked. Thanks a lot HSD-Pilot. Its flashing now! God bless!
Yeah, as I thought. And I'll bet, the ICS EU Rom will work, too.
I think you tried an GB Rom @ the first flash.
But now I'm glad it works for you. Set your RazR up and charge your battery, before you try anything else :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
Yeah, as I thought. And I'll bet, the ICS EU Rom will work, too.
I think you tried an GB Rom @ the first flash.
But now I'm glad it works for you. Set your RazR up and charge your battery, before you try anything else :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Sure, will try. Really appreciate your help man.
No Problem, that's why we're here. To keep things going. Although I can learn a lot by helping other people out of trouble.
We can't help everybody, but when we got time, why not.
Gesendet von meinem XT910 mit Tapatalk 2
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CustomerID error,Contact Dealer
Boot to Suspend/TCMD mode:0004:00000000:000000cc?
ICS LEKAS 672.180.17.XT910.Retail.en.EU
boot up BT Tool
help
Dude, if you doesn't back up your mmcblk1p18 than there's no help.
I bet you got no backup, because you ask about this failure so > NO HELP FOR YOU AND FOR ME
Gesendet von meinem XT910 mit Tapatalk 2
Not backup your mmcblk1p18
thanks
I've asked our service in Germany, what is my solution. They answered' i've to change my board and it will cost 259€. I can buy an new Phone for that Money, so that's no solution for me :thumbdown:
Gesendet von meinem XT910 mit Tapatalk 2
Wait for the official SBFs to release. If that won*t help you can still send your phone to repair. But I guess there will be another solution..
Edit> This seems to be an solution! Flash the ebr file from GB ---> http://forum.xda-developers.com/showthread.php?t=1709431
Edit: Sorry, just for LATAM with CID backup... but maybe it helps a bit
Come on Dtrail, we both know there won't be an solution. Also FastbootFiles won't change anything.
My failure was, to try your Root Method before it was confirmed on XDA. First time i read an word about the mmcblk1p18 was, after i confirmed that it's working. Before that we where just talking about booting over BP for an while. Nothing about forever...
Lesson i've learned > just trust XDA/DroidRzR :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Is an mmcbkl18 backed up from a rooted ICS 4.04 as good as one from a GB rom ?.
I am asking because i only backed up after updating to the ICS EU retail leak and now i want to update to the new CN.en from China.
btw my original rom was Asia retail.
Sent from my XT910 using XDA Premium App
The mmcblk1p18 is unique and depends on your Motherboard. So it doesn't matter, what rom you're using. The blk1p18 should be the same. That's why my only way is to change the board.
Some users backed up their blk1p18 from T-Mobile Leak and restored it successfully on the EU Leak. So you should be safe. Just be sure it got 512kb if i remember right.
Edit: Maybe a nice guy can confirm that before you try anything. I'm just an User that play with his toy and try to learn. You know what i mean . There're some Android Profs here, that know more about this stuff than i do
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
Come on Dtrail, we both know there won't be an solution. Also FastbootFiles won't change anything.
My failure was, to try your Root Method before it was confirmed on XDA. First time i read an word about the mmcblk1p18 was, after i confirmed that it's working. Before that we where just talking about booting over BP for an while. Nothing about forever...
Lesson i've learned > just trust XDA/DroidRzR :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Just have a look on our group threads, and also what frasertag said before you talk about there is no solution! We don't know it exactly, but it seems to be possible as soon as we get an fullflash SBF. And I've got also another idea, but therefor we need the fullflas SBF first..So just chill until we get these files, then we'll see.
Edit: and don't say I haven't warned you before..
Gesendet von meinem XT910 mit Tapatalk 2
dtrail1 said:
Just have a look on our group threads, and also what frasertag said before you talk about there is no solution! We don't know it exactly, but it seems to be possible as soon as we get an fullflash SBF. And I've got also another idea, but therefor we need the fullflas SBF first..So just chill until we get these files, then we'll see.
Edit: and don't say I haven't warned you before..
You did a favour to mqny others with testing to restore p18 backup from another device. After that we knew exactly that it doesn't work.
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
Gesendet von meinem XT910 mit Tapatalk 2
NOT repair?
CustomerID Error
Hi brothers,
My razr got same problem like CustomerID error while this same issue showing i tried restore back ICS. Restoring all completed succesfully but its still cannot load OS. is it because of CustomerID error ? The hope which i having i had the back of cid.img file. Is there any way to restore back this file back my droid razr maxx xt910.
Please help me brothers..
Thank you
Shamil.
shamytvm said:
Hi brothers,
My razr got same problem like CustomerID error while this same issue showing i tried restore back ICS. Restoring all completed succesfully but its still cannot load OS. is it because of CustomerID error ? The hope which i having i had the back of cid.img file. Is there any way to restore back this file back my droid razr maxx xt910.
Please help me brothers..
Thank you
Shamil.
Click to expand...
Click to collapse
You MUST restore your personal CID. Each device has its own special Customer ID. You really should take care of what you're doing with your device...
Let's look for a solution: How did you wipe your CID? If you used BMM for that, your CID should be located on your sdcard / sdcard-ext in a folder called "clockworkmod/Firmware". You can restore it manually by using dd command in Terminal or adb. The easy way would be to install/use BMM. Just reboot into recovery, select "Firmware Flashing" and "Restore CID, now navigate to your clockworkmod-folder, select the file called "CID_xxx_xx..." (xx stands for a date or similar) and confirm with "Yes". MAKE SURE you have a kernel installed which matches your region!!
If you lost you backed up CID, there is unfortunately no way back...
AW: How to repair CustomerID error,Contact Dealer Boot to Suspend/TCMD
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Well, IF he's got his backup..
Temporary (and forever) solution; Keep BMM installed and let it bypass the CID-Error
have ncrateA
HSD-Pilot said:
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Thanks alot bro..
But write now i can access my ap fastboot only, os also not loading..
Previosly what i did was :-
My razr maxx is ics 4.0.4 - i rooted - install boot menu manager - backup cid.img ( and kept a back in pc also ) .
Then i tried to update to jellybean .. Successfully updated and wiped data.. But its not loading os..
Again and again tried to restore back ics still same error showing 'CustomerID error'.
Its very appreciable if you can show me a step by step way to restore back my cid.img and continue to install ics rom also..
Thanks alot brothers
Shamil
AW: How to repair CustomerID error,Contact Dealer Boot to Suspend/TCMD
To boot into the System with an erased CID you have to choose BPTools in your Bootloader (Where you select AP Fastboot)
After that you can root (Always use BPToos during the reboots) and install BMM.
Gesendet von meinem XT890 mit Tapatalk 2
Cid.img restore
HSD-Pilot said:
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
HSD-Pilot said:
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Thanks alot bro..
But write now i can access my ap fastboot only, os also not loading..
Previosly what i did was :-
My razr maxx is ics 4.0.4 - i rooted - install boot menu manager - backup cid.img ( and kept a back in pc also ) .
Then i tried to update to jellybean .. Successfully updated and wiped data.. But its not loading os..
Again and again tried to restore back ics still same error showing 'CustomerID error'.
Its very appreciable if you can show me a step by step way to restore back my cid.img and continue to install ics rom also..
Thanks alot brothers
Shamil
AW: How to repair CustomerID error,Contact Dealer Boot to Suspend/TCMD
BTW: If you alteady updated to JB by using the OTA, there's no way back to ICS!
Gesendet von meinem XT890 mit Tapatalk 2
HSD-Pilot said:
fastboot flash cid cid.img
If you're not rooted
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Wait!
I found that htc's cid can be edited by fastboot.
And the command above proved that cid has no sign-check.
So if we can getvar it from a p18 phone (allow-mbmloader-flash-mbm)
And we edit it directly from fastboot......
Now we just have to confirm that if fastboot disabled the cid writing.
I've made a thread including some extensions and stuff like that to extend ICS en.EU. You will find it in our forums (Eternity Project):
----> http://www.eternityproject.eu/topic/119-modsfiles-ics-404-gsm-eu/#entry915
*Thanks to Leviathan26, andlaw
Add this to your list dude :thumbup:
http://forum.xda-developers.com/showthread.php?p=28207269
Sent from my XT910 using Xparent ICS Tapatalk 2
Sorry for the noob question
How do I flash this?
do I put it on the sd card then flash it through AP fastboot? or through bootstrap boot menu?
And this too for noobs
http://forum.xda-developers.com/showthread.php?t=1750710
Visit my channel on youtube
youtube.com/Therazrguy
kougloff said:
Sorry for the noob question
How do I flash this?
do I put it on the sd card then flash it through AP fastboot? or through bootstrap boot menu?
Click to expand...
Click to collapse
What exactly do you want to flash?
Sent from my XT910 using Tapatalk 2
Added both! Thanks, therazrguy and HSD-Pilot!
dtrail1 said:
Added both! Thanks, therazrguy and HSD-Pilot!
Click to expand...
Click to collapse
No prob I am glad I could help you
Visit my channel on youtube
youtube.com/Therazrguy
dtrail1 said:
What exactly do you want to flash?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
I want to flash the kernel ^^
kougloff said:
I want to flash the kernel ^^
Click to expand...
Click to collapse
Flash it via AP fastboot.
- Plugin your Razr, reboot into AP fastboot
- be sure that the kernel boot.img file is in the same foler like the fastboot.exe (or moto-fastboot.exe or eprj-mfastboot.exe, whatever you use)
- open up an command prompt, browse to thet directory which contains the files and type:
fastboot flash boot xx
Click to expand...
Click to collapse
the xx means the name of the boot.img file name. If you want to flash the "boot44.img" then type that name instead of xx:
fastboot flash boot boot44.img
Click to expand...
Click to collapse
fastboot means, when you use moto-fastboot, you should type moto-fastboot instead of fastboot
Example for using moto-fastboot.exe and boot44.img:
moto-fastboot flash boot boot44.img
Click to expand...
Click to collapse
If there is displayed something like:
sending...OKAY
writing....OKAY
then everything went fine!
got it?
I'll try it later
Thanks!!!
- added new kernel and radio from 676.226.3.en.EU
- added init.d tweaks
I don't why, but after fashing the latest leak, 676.226.3, I have issues with the black gapps. After flashing the package, Gtalk has disappeared and I'm not able to re flash it, even the normal one. I also tried a all clean installation..... same result! Bye.
Try to flash normal gapps.
Gesendet von meinem XT910 mit Tapatalk 2
flash rom
i would like to flash the rom from brazil but dont want to do it as a second system just replace the one im using so can i do it and how.
im runin ics oficial brazil.
Wrong thread for that question
But to answer it: Just follow the guide given in the thread from your Rom. If you are using bootmenu right now and want it persist then flash the rom and after that install bootmenu.
Gesendet von meinem XT910 mit Tapatalk 2
Can you piont me to a tutorial cuz im noob and dont have bootmenu im just rooted with the brazil stock rom.
You don't need it, if you don't want use a second system. But here is a guide: http://www.eternityproject.eu/topic/123-romgsm-ics-custom-roms-frequently-updated/
ok thanks i will check it out.
razielpr said:
ok thanks i will check it out.
Click to expand...
Click to collapse
Refer to this one to
Thanks Whirleyes,
I've written am guide for noobs including the way to modify the updater-script. Maybe we could put them together?
The latest baseband eats much more battery! But the signal strength is awesome.
Gesendet von meinem XT910 mit Tapatalk 2
So, maybe this is the most nooby question you have ever read, but I come from a samsung galaxy ace, and it was very easy to flash a ROM, just flash zip from SD card, and Motorola RAZR is more complicated, at least for me. I want to flash the final ICS build for Europe (http://forum.xda-developers.com/showthread.php?t=1747800) from EternityProject, so I downloaded the Rom and the Fla**** tool. I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=1453660 but I don't know what's the AP Fastboot mode. My razr is rooted and it has Clockwork mod recovery. ¿Can somebody help me please?
http://forum.xda-developers.com/showthread.php?p=23453478
Use this Guide and search for RSDLite 5.7 and use the actual Moto Driver.
I suggest you to wipe Data before you upgrade to ICS.
Gesendet von meinem XT910 mit Tapatalk 2
HSD-Pilot said:
http://forum.xda-developers.com/showthread.php?p=23453478
Use this Guide and search for RSDLite 5.7 and use the actual Moto Driver.
I suggest you to wipe Data before you upgrade to ICS.
Gesendet von meinem XT910 mit Tapatalk 2
Click to expand...
Click to collapse
But I still don't know whatñs the AP Fasbooot mode
derf1996 said:
But I still don't know whatñs the AP Fasbooot mode
Click to expand...
Click to collapse
Ok, sorry, I have succesfully flashed it, thanks a lot for the help
In order to communicate with RDSlite, the phone must be in said mode.
From RAZR by Tapatalk
Be patient, please, and let me explain.
My new device never worked fine. Never was able to use wifi or bluetooth, so i made everything I could imagine or you, people, helped me. Nothing worked.
So i asked help the seller and told me a lot of foolish advices, just to avoid the issue. He did not response by the issue. So I was ... you know... f(censored).
Then i saw a thread. Some Motorola G had same issue, and fixed by copying a file at persist folder. You had to be root to find it. So i tried to root. Nothing happened. Nor by abd or anything else. Finally I installed Cuoco... but device did not root!
I am begging to suspect a fake. If this would be a fake, root and firmware (to wifi and BT) could not work fine, right?
Is it possible? Can they lock root? If not, why can not root? Conspiracy?
Thanks.
root thew phone, flash twrp, flash a aosp or los rom and see if it still doesnt work
theodoresturgeon said:
Be patient, please, and let me explain.
My new device never worked fine. Never was able to use wifi or bluetooth, so i made everything I could imagine or you, people, helped me. Nothing worked.
So i asked help the seller and told me a lot of foolish advices, just to avoid the issue. He did not response by the issue. So I was ... you know... f(censored).
Then i saw a thread. Some Motorola G had same issue, and fixed by copying a file at persist folder. You had to be root to find it. So i tried to root. Nothing happened. Nor by abd or anything else. Finally I installed Cuoco... but device did not root!
I am begging to suspect a fake. If this would be a fake, root and firmware (to wifi and BT) could not work fine, right?
Is it possible? Can they lock root? If not, why can not root? Conspiracy?
Thanks.
Click to expand...
Click to collapse
Last option:
Use the qfil unbrick rom for debricking . I
Would be surprised if it worked with a clone.
Gesendet von meinem HTC Desire 310 mit Tapatalk
nosidefcp said:
root thew phone, flash twrp, flash a aosp or los rom and see if it still doesnt work
Click to expand...
Click to collapse
Ok, but i can not root the phone. In other hand, what do you mean with "los rom"?
A.N.Droid said:
Last option:
Use the qfil unbrick rom for debricking . I
Would be surprised if it worked with a clone.
Gesendet von meinem HTC Desire 310 mit Tapatalk
Click to expand...
Click to collapse
I used qfil a lot of times. Yes, it makes the phone alive, but issues remain: no possible root, no wifi, no BT.
theodoresturgeon said:
I used qfil a lot of times. Yes, it makes the phone alive, but issues remain: no possible root, no wifi, no BT.
Click to expand...
Click to collapse
If you want i can remote assist you. Done it a could of times with xda users. I recently learned s lot about unbricking and about leeco devices in generall. I have time today because i'm sowewhat ill, meinjg i could be a bit slow.
If you want to, install teamviewer and send mee youf credentials via pm.
Gesendet von meinem HTC Desire 310 mit Tapatalk
The issue is most likely the efs partition of your phone cause neither qfil nor a custom rom are going to touch it. I don't know how you will be able to manipulate this partition (modemst1 and modemst2) without root
leptdre said:
The issue is most likely the efs partition of your phone cause neither qfil nor a custom rom are going to touch it. I don't know how you will be able to manipulate this partition (modemst1 and modemst2) without root
Click to expand...
Click to collapse
Fastboot
Gesendet von meinem HTC Desire 310 mit Tapatalk
A.N.Droid said:
If you want i can remote assist you. Done it a could of times with xda users. I recently learned s lot about unbricking and about leeco devices in generall. I have time today because i'm sowewhat ill, meinjg i could be a bit slow.
If you want to, install teamviewer and send mee youf credentials via pm.
Gesendet von meinem HTC Desire 310 mit Tapatalk
Click to expand...
Click to collapse
Really Thanks!!!
I will install teamview right now.
A.N.Droid said:
....i'm sowewhat ill.....
Gesendet von meinem HTC Desire 310 mit Tapatalk
Click to expand...
Click to collapse
I hope nothing serious. Best wishes of health.
If you use antutu benchmark it proposes to install officer app that checkes device is original. You can also use other hardware checking tools. Try install some Android 7 eg Resurrection Remix that comes with preinstalled magisk which is newest method of rooting.
Sent from my LEX820 using Tapatalk
theodoresturgeon said:
Really Thanks!!!
I will install teamview right now.
Click to expand...
Click to collapse
i sent you 3 messages but they dont show up under sent items.
fell asleep yesterday.
please pm me again an leave your pc/tw on.
as soon as i read your message, i will log in.
Hello people,
After 4 days trying to save my Mi9 with 2 weeks, i've recover it.
Thanks to dj_sk, diamond member of MIUI forum.
Behind put the link that helped me.
HTTPS://en.miui.com/thread-3450268-1-1.html
I hope that help you.
PRolo said:
Hello people,
After 4 days trying to save my Mi9 with 2 weeks, i've recover it.
Thanks to dj_sk, diamond member of MIUI forum.
Behind put the link that helped me.
HTTPS://en.miui.com/thread-3450268-1-1.html
I hope that help you.
Click to expand...
Click to collapse
Thanks for this, which rom your phone came with, Chinese, global or EEA? cheers
a post to keep warm in case of problems thank you
vtec303 said:
Thanks for this, which rom your phone came with, Chinese, global or EEA? cheers
Click to expand...
Click to collapse
EEA.
Sent from my MI 9 using XDA Labs
PRolo said:
EEA.
Sent from my MI 9 using XDA Labs
Click to expand...
Click to collapse
Ok, how did you manage to brick it ?
With Miflash tool V2, give me a error in the end and the good notice that "system has been removed".
After that were 4 days of pain...
Sent from my MI 9 using XDA Labs
Bricked Mi 9
Let me get straight to the point before I explain. I bricked my Mi 9 (had it for weeks but didn't use it till I got the bootloader unlocked) and it doesn't boot into TWRP can only get it to fastboot no matter what I tried so far. Installed an unofficial TWRP there are two types with practically 0 differences. This Mi 9 is the global version. 6gb 128gb storage
So I wanted to try Xiaomi.EU ROM as it's a debloated version as some would say. but that had a nasty camera bug, status bar notch looked cramped and unpolluted as they tried to minimise the bar. Some apps from the playstore wasn't installing like the DJI mimo app, it would just cancel halfway through the download. Then I completely forgot that my fingerprint scanner won't work on my banking app anymore, since the bootloader is unlocked. Google Pay also suffers from that and I know you can use magisk etc to sort out most of the problems like the fingerprint scanner and Gpay. So after discovering these issues, there are far too many to deal with now. I'll just go back and try something more clean and that's where all the mess began...
I haven't rooted in a few years so I'm very rusty at half the stuff that is happening. I know bits and bobs but that was with my Nexus and Pixel phones. Mi 9 is my first official replacement and I thought hey let's get back into mods etc. If only I had more knowledge on what to do. I will still try to figure it myself, so I potentially could help others but I fear I won't get far.
Anyways tried to get it back to run a beta version of the latest global or stable and so the last thing I did before all things went to . I went to TWRP and advance wiped dalvik, cache and data and was specifically told not to mark sdcard and another option which was there. (This was a thread I was reading, can't remember which site) now the phone completely 'ded' as in it is now stuck in the bootloop and doesn't go anywhere else besides fastboot. How I went about flashing TWRP and trying to install magisk was using the XiaoMiTools V2 which did some of the work (unbrick feature isn't available yet on the toolkit). But after the wipe I did, the toolkit doesn't recognise the device and MiFlash also doesn't seem to work although with that I think I get weird prompt like something didn't go well and I'm maybe not doing something right although I believe I have. Because the phone has been wiped I don't have ADB debugging on the device and I believe that could have been a solution for me to wiggle out of the mess. So I'm desperately looking for the community to help get my Mi 9 fully operational again. Anyone out there?
Only thing fastboot seemed to recognise is when I'm flashing the different two versions of twrp.img
Looking forward to your comments.
Hello friend, I have the same problem as you. `` The system has been destroyed''. I wanted to know which Chinese version you have used, because I have the EEA V10.2.17.0 and I do not know which Chinese version to use, the ones I downloaded have given me an error. Tell me who you used your thanks. If you could make me a little guide, I would be very grateful for more than 10 days without my mi9 .. @PRolo
I don,t have my pc with me, download the EEA original from Miui. And with Mi Tool Pro install that, follow the steps on link i put um the beginning.
If didn't work tell me and when I came home help you.
PRolo said:
I don,t have my pc with me, download the EEA original from Miui. And with Mi Tool Pro install that, follow the steps on link i put um the beginning.
If didn't work tell me and when I came home help you.
Click to expand...
Click to collapse
But what exactly did you do, I have tried it by all means and it does not recover from the brick I happened the same as you. And I've tried the tutorial and there's no way. You did the whole turorial? or just up to some step?
Hello friend, nothing is needed. He took it out of the brick. It is taken out only with the first step of the program. What the nose is because it did not work the first time I tried it. Greetings and thank you
domingoorta said:
But what exactly did you do, I have tried it by all means and it does not recover from the brick I happened the same as you. And I've tried the tutorial and there's no way. You did the whole turorial? or just up to some step?
Click to expand...
Click to collapse
Bit of an old post to reply to... But did you manage to fix your problem? Did you note down the build of the original ROM that was on your device in the first place?
Thanks for this post, sadly my new Mi9 is in the same condition. All I did was update to lastest EEA-ROM (which was offered automatically by system right after setup), registered for BL unlock and finally decided to Factory Reset and start afresh as did not recover data from my Google backup.
Right now I cannot use recovery mode as the recovery also throws the "System destroyed" error (presumably because the update did something awful with the recovery).
As the mentioned method does not work in fastboot mode I am a bit at a loss on what to do - besides waiting for the BL unlock timer to do its thing (which it hopefully will do despite the fact that I don't use the phone ATM). I tried a lot of tools and hints but so far with BL locked its a no-go
Any ideas/suggestions ?
s3axel said:
Any ideas/suggestions ?
Click to expand...
Click to collapse
Can you enter fastboot or recovery?
Do you know which exact version of rom your phone was using in the first place?
reg66 said:
Can you enter fastboot or recovery?
Click to expand...
Click to collapse
Fastboot only...
Gesendet von meinem VOG-L29 mit Tapatalk
s3axel said:
Fastboot only...
Gesendet von meinem VOG-L29 mit Tapatalk
Click to expand...
Click to collapse
do you know what your exact rom version was? Before the update...
Have you tried miFlash Tool from here, which also has instructions. On the same page is a link to latest fastboot ROMS. here's another link to fastboot roms. Does this help?
reg66 said:
do you know what your exact rom version was? Before the update...
Click to expand...
Click to collapse
No, sadly I don't recall that. Presently I cannot recover any info on the version with fastboot getvar all, the fields are empty.
I think I can remember the update had something with a "9" or "19" in it - but the "9" would mean a global ROM instead of an EEA which I expected (the phone is marked with global, though)... I do recall Google Update is from 03/19...
Well, what a mess...
Gesendet von meinem VOG-L29 mit Tapatalk
s3axel said:
No, sadly I don't recall that. Presently I cannot recover any info on the version with fastboot getvar all, the fields are empty.
I think I can remember the update had something with a "9" or "19" in it - but the "9" would mean a global ROM instead of an EEA which I expected (the phone is marked with global, though)... I do recall Google Update is from 03/19...
Well, what a mess...
Gesendet von meinem VOG-L29 mit Tapatalk
Click to expand...
Click to collapse
Well if its marked global you might not have any choice but to try and flash global fastboot rom. See above post for links
reg66 said:
Well if its marked global you might not have any choice but to try and flash global fastboot rom. See above post for links
Click to expand...
Click to collapse
Thanks, tried that with MiFlash but it seems unable to erase existing partitions with locked BL. I'll try EEA next, maybe it's a ROM compatibility thing...
Gesendet von meinem VOG-L29 mit Tapatalk
s3axel said:
Thanks, tried that with MiFlash but it seems unable to erase existing partitions with locked BL. I'll try EEA next, maybe it's a ROM compatibility thing...
Gesendet von meinem VOG-L29 mit Tapatalk
Click to expand...
Click to collapse
Fingers crossed