ATTENTION: THIS IS JUST A PREVIEW. MAY CONTAIN A LOT OF BUGS!
NO SUPPORT!!!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
First time installing CyanogenMod 10 to your Galaxy S II, or coming from another ROM:
- Make sure you're running a proper working CWM Recovery
- Copy GApps and CM10 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM10 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 10:
- Copy CM10 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM10 zip from internal SDCard
- Reboot
Experimental builds:
http://d-h.st/JaT - 7/27/2012
http://d-h.st/aMl - 8/3/2012
http://d-h.st/iXg - 8/13/2012
http://d-h.st/3KE - 8/18/2012
http://d-h.st/QbU - 8/19/2012
Google Apps:
Get the latest Version from Rom-Manager.
Newer, unsupported versions can be found at http://goo.im/gapps
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
Development Thread (DEVELOPERS ONLY): http://forum.xda-developers.com/showthread.php?t=1796744
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!
KNOWN ISSUES:
Everything is broken until proven otherwise.
Known broken things include:
Mediascanner derps hard for many people, eating 100% CPU for 30-40 minutes on boot.
Missing many CM10 features
NFC totally untested
Anything broken on I9100 will be a problem on I777 too
Screenshots are from I9100. I'm lazy, and I777 isn't any different
You want to live on the bleeding edge, you're probably gonna get cut
Yay! I'm finally first on something big. Downloading now, can't wait to try it out!
Sent from my SGH-I777 using xda premium
Great day!
Sent from my SGH-I777 using xda premium
Can't wait to flash this ROM but I will wait until its been tested a little more.
BTW why are your screen shots in German?
Sent from my Transformer Prime TF201 using XDA Premium HD app
hellalucard said:
Can't wait to flash this ROM but I will wait until its been tested a little more.
BTW why are your screen shots in German?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
You did not read entire post
Sent from my SGH-I777 using xda premium
hellalucard said:
Can't wait to flash this ROM but I will wait until its been tested a little more.
BTW why are your screen shots in German?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
Das ist die deutschenjellybeanischerrom!
Sent from my SGH-I777 using Tapatalk 2
Updated OP... libsensors is missing. oops
I'm already running the i9100 build (fast & fluid btw), but what the heck, I'll flash this one Thanks Entropy
Sent from my SGH-I777 using Tapatalk 2
hellalucard said:
BTW why are your screen shots in German?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
They are from Codeworkx's i9100 thread, also he's German.
It's there in the OP...
On topic: Thanks Entropy! Much awaited and much appreciated.
This build should have a couple of improvements compared to the i9100, there were several commits today for JB... might include T-Mobile Theme Engine and device settings - unconfirmed - .
hellalucard said:
Can't wait to flash this ROM but I will wait until its been tested a little more.
BTW why are your screen shots in German?
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
theres really no need to post a banner of when and why you arent flashing this dude.
Hell yeah!
Sent from my GT-I9100 using xda app-developers app
What is affected by libsensors? What will I be missing without it? Sorry if it's a n00b question.
Sent from my SGH-I777 using XDA Premium HD app
I'm getting:
getprop("ro.product.device") == "SGH-I777 || getprop("ro.build.product") == "SGH-I777" E:Error in /emmc/doanload/cm-10-20120726-UNOFFICIAL-i777.zip (Status 7)
Do I need to modify the zip? This is coming from CM9/AOKP.
The recovery is CWMR xxTouch v5.5.0.4. I'm guessing I need to flash another kernel and try again, am running fluxxi
wow. this is pretty darn cool. thanx a ton for all of yalls tireless work.
no peggin of the cpu either. this crap is so damn fast. i wasnt expecting this much of a dif between jelly bean and aokp... but it is waaaaay better.
no offence task
ferrocene said:
I'm getting a getprop == i777, getprop == SGH-I777 error.
Do I need to modify the zip? This is coming from CM9/AOKP.
Click to expand...
Click to collapse
Same here. Any suggestions on what build prop values to change, and what to? Looks like it check several values. Going to try flashing SHOstock 2 then try again.
Sent from my TouchPad
ferrocene said:
I'm getting:
getprop("ro.product.device") == "SGH-I777 || getprop("ro.build.product") == "SGH-I777" E:Error in /emmc/doanload/cm-10-20120726-UNOFFICIAL-i777.zip (Status 7)
Do I need to modify the zip? This is coming from CM9/AOKP.
Click to expand...
Click to collapse
Same problem! Hopefully it was just a corrupt download
(Also coming from AOKP 7/3)
This is running very nice. No problems at all.
Sent from my SGH-I777 using xda premium
quarlow said:
Same here. Any suggestions on what build prop values to change, and what to? Looks like it check several values. Going to try flashing SHOstock 2 then try again.
Sent from my TouchPad
Click to expand...
Click to collapse
122ninjas said:
Same problem! Hopefully it was just a corrupt download
(Also coming from AOKP 7/3)
Click to expand...
Click to collapse
remove that line from the updater-script.
task650 said:
remove that line from the updater-script.
Click to expand...
Click to collapse
I flashed Siyah v3 and get the same error.
Quick question: why is that line in the script? On which ROMs does it work with? It would be faster for me to flash something else I think.
*EDIT* I opened the zip, navigated to cm-10-20120726-UNOFFICIAL-i777.zip\META-INF\com\google\android\updater-script and deleted the first two lines, but I'm still getting the same error message. Which is weird because it doesn't exist anymore.
*Edit 2* Going to reflash CM9 nightly and see what happens.
I used the hellraised i9100 to try JB and I'm currently on it. Can I just flash over with wipe ? Or will I need to flash a different kernel first ?
Sent from my AT&T Galaxy S2 running CM9 Nightlies
Related
##################################################################################################
##################################################################################################
LewaOS ROM (with gapps) PORT
for Samsung Galaxy S WiFi/Player 5.0 Only
##################################################################################################
##################################################################################################
English & Chinese version only
Thanks to @SirRhor for testing this ROM on the USA device and it working
Thanks to:
-Lewa Team
-Cyanogenmod team
-blindndumb (Guide/tips)
-Jaekar99 (Boot animation)
-Ambrice (CM7 Port)
[email protected] (Init.d tweaks)
-XDA Forums for helping my know
Features:
-GAPPS pre-installed
-Tweaked ALOT by me (init.d tweaks/build prop/general)
-Smooth and amazingly fast
-based of CM7 android 2.3.7
-Looks great, themes available
-DPI of 200
-Fixed Market for any DPI settings
-Custom boot animation
-added apps like ES file explorer
-YouTube HD 720p App
-Took some stock apps out that dont work
-200+ MB RAM free
-Very very fast
-full customization by user
-Press on statusbur anywhere,u will see software keys
-Custom UI
-Paginated toggles in status-bar
-task killer button in statusbar
-Advance Power menu e.g. screenshot/reboot recovery etc
-Power management App
-1.2ghz cfq Conservative stock
-Vibration works
Not working:
-Video Camera (STILL IMAGES ARE WORKING)
-Wireless issues (Just be patient upon trying to connect)
-Lights on the Buttons?
-......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation instructions:
1.Put ROM file .zip onto SD card
2. Wipe data/factory reset, wipe cache partition and wipe Dalvik cache
3. Install ZIP from SD card / ZIP has Gapps pre installed as well
4.Reboot ( May take a while first time be patient)
5.Done
Click to expand...
Click to collapse
SKIP Google account and then go into settings and connect to wifi and then add Google account via setting app. ( See video below)
Any improvements to suggest or problems feel free to say
Download
Mirror 1
Mirror 2
Click to expand...
Click to collapse
Please do not MIRROR.
Installation Video:
Review video:
Click to expand...
Click to collapse
--------------------
19/05/2012-----
V1. First Release
---FLASH AT YOUR OWN RISK---
btdag said:
Oic - in that case did you definitely type in the correct details to the gold card creation website?
Try a different operating system...
Click to expand...
Click to collapse
It is very interesting rom, but this rom not support korean
Sent from my YP-G70
Hi Rueban can you post the YouTube 720 p HD apk I would like to try it and I subscribed on YouTube
Can you make a phone hack? So whatsapp will work on the player
Sent from my YP-G70 using xda premium
Thank you for the release. I was wondering if development for the 5.0 stopped. I will try it tonight on my US device and report back.
One question, would you mind sharing the method you used to fix the Market when you change the DPI to 200?. I change it to that value as well but only after I installed all the apps I want; trying to install new apps after the DPI changes is a no no.
Sent from my YP-G70
heat361 said:
Hi Rueban can you post the YouTube 720 p HD apk I would like to try it and I subscribed on YouTube
Click to expand...
Click to collapse
Yep no problem here you go simply put in /system/app you can use ADB method or file explorer your choice Link to download apk
SirRhor said:
Thank you for the release. I was wondering if development for the 5.0 stopped. I will try it tonight on my US device and report back.
One question, would you mind sharing the method you used to fix the Market when you change the DPI to 200?. I change it to that value as well but only after I installed all the apps I want trying to install new apps after the DPI changes is a no no.
Sent from my YP-G70
Click to expand...
Click to collapse
Ha yea i was thinking that as well. I plan to see if I can port more great roms to this device but im at college at the minute so will have to wait a few weeks. Yea i found here are the two files i changed the market (vending) and Googleservicesframework. Feel free to take a look at them. I cant take credit for this though I found them by anonymous on a web forums
File1
File2
These files will b installed in /system/app and will work with any dpi. They make the market think that the dpi is 240.
kfirbep said:
Can you make a phone hack? So whatsapp will work on the player
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
No sorry im a porter not a dev.
Thank you for the reply.
I have an observation. In the description you state that US users should apply the ROM and then the proper kernel (Entropy's Daily Driver?).
Shouldn't be the kernel first and then the ROM?
Newcomers might get confused.
Sent from my YP-G70
Hey Rueben do you mind telling me/linking me to the method of porting you used for LewaOS? I want to port JoyOS to our Galaxy Players and I'm pretty shure that the porting methods are the same. Thanks in advance, peace.
-EcHoFiiVe
the US capacitive buttons dont seem to be working with this rom
Rueben_ said:
Yep no problem here you go simply put in /system/app you can use ADB method or file explorer your choice Link to download apk
Ha yea i was thinking that as well. I plan to see if I can port more great roms to this device but im at college at the minute so will have to wait a few weeks. Yea i found here are the two files i changed the market (vending) and Googleservicesframework. Feel free to take a look at them. I cant take credit for this though I found them by anonymous on a web forums
File1
File2
These files will b installed in /system/app and will work with any dpi. They make the market think that the dpi is 240.
No sorry im a porter not a dev.
Click to expand...
Click to collapse
Well if you want you can ask from erygit to help you with this. He know how to do phone hack
Sent from my YP-G70 using xda premium
blcistheking said:
the US capacitive buttons dont seem to be working with this rom
Click to expand...
Click to collapse
Maybe this could help, I hope:
http://forum.xda-developers.com/showthread.php?t=1585551
Sent from my YP-G70
SirRhor said:
Thank you for the reply.
I have an observation. In the description you state that US users should apply the ROM and then the proper kernel (Entropy's Daily Driver?).
Shouldn't be the kernel first and then the ROM?
Newcomers might get confused.
Sent from my YP-G70
Click to expand...
Click to collapse
Im pretty sure your supposed to flash the kernel after because the rom contains the wrong kernel. On my Galaxy s2 I always flash a particular kernel after because the rom contains a different one.
EcHoFiiVe said:
Hey Rueben do you mind telling me/linking me to the method of porting you used for LewaOS? I want to port JoyOS to our Galaxy Players and I'm pretty shure that the porting methods are the same. Thanks in advance, peace.
-EcHoFiiVe
Click to expand...
Click to collapse
Yep here's the link: http://forum.xda-developers.com/showthread.php?t=1623464 Although this only ports the ROM over. You will need to remove apps, edit buid prop, add tweaks e.g. init.d and remove junk like phone service.
blcistheking said:
the US capacitive buttons dont seem to be working with this rom
Click to expand...
Click to collapse
Have you tried flashing Entropys kernel after flashing the ROM.
Yeah, I just noticed the big "AOSP" on the title, haha.
EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.
Sent from my YP-G70
SirRhor said:
Yeah, I just noticed the big "AOSP" on the title, haha.
EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.
Sent from my YP-G70
Click to expand...
Click to collapse
Ok thanks fir trying, ive just made a new ROM that i Think should work for the USA version. Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo
Try booting straight after flashing the ROM and if that does not work try flashing the kernel after flashing the ROM. Please get back to me on how it works thanks.
Note that the version i am asking you to flash is not final, e.g. it does not have tweaks etc.
SirRhor said:
Yeah, I just noticed the big "AOSP" on the title, haha.
EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.
Sent from my YP-G70
Click to expand...
Click to collapse
Cm7 uses a different initramfs than stock, so you can't use entropy's kernel since this is based off of cm7. You have to stick with the kernel included with this rom.
Sent using Tapatalk
klin1344 said:
Cm7 uses a different initramfs than stock, so you can't use entropy's kernel since this is based off of cm7. You have to stick with the kernel included with this rom.
Sent using Tapatalk
Click to expand...
Click to collapse
Yea this ROM is CM7 based sorry had to clear that up. Also could some please try flashing this ROM for the USA version thanks
Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo
EDIT: I can really do anything with this ROM unitl I know if the version above works with the USA version
But in the meantime I have JOYOS Ported to our device, and all seems to be working well, no FC etc
Rueben_ said:
Ok thanks fir trying, ive just made a new ROM that i Think should work for the USA version. Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo
Try booting straight after flashing the ROM and if that does not work try flashing the kernel after flashing the ROM. Please get back to me on how it works thanks.
Note that the version i am asking you to flash is not final, e.g. it does not have tweaks etc.
Click to expand...
Click to collapse
I get this error when I try to install it:
assert failed: getprop("ro.product.device") == "blade" || getprop("ro.build.product") == "blade" || getprop("ro.product.board") == "blade"
E:Error in /sdcard/LeWa_ROM_v1.USA.VERSION.zip
(Status 7)
Installation aborted.
When I reinstalled the first version you uploaded without Entropy's kernel, it booted, but to tell you the truth, it has many cellphone related visual features for my taste.
I hope it helps.
SirRhor said:
I get this error when I try to install it:
assert failed: getprop("ro.product.device") == "blade" || getprop("ro.build.product") == "blade" || getprop("ro.product.board") == "blade"
E:Error in /sdcard/LeWa_ROM_v1.USA.VERSION.zip
(Status 7)
Installation aborted.
When I reinstalled the first version you uploaded without Entropy's kernel, it booted, but to tell you the truth, it has many cellphone related visual features for my taste.
I hope it helps.
Click to expand...
Click to collapse
So the version in the Original posted worked but the version specially for the USA did not yes?
Rueben_ said:
So the version in the Original posted worked but the version specially for the USA did not yes?
Click to expand...
Click to collapse
Yes.
Sent from my YP-G70
Its very fast and lot of free Ram but i just cant live with out camera.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
Paranoid Android Rom ported from Galaxy Player 5.0 using Bbelos' CM9 rom as a base
THE ROM CAN BE DOWNLOADED ON ROM MANAGER
Download Links
Beta 4
Beta 3
Beta 2
Beta 1
Beta 1.1
Gapps
Screenshots
This is an ongoing developer project to make way for a modification that will entirely transform your device, but retain the aesthetics and the experience of your phone. I know you've seen tablet mode roms before, they change two lines in your build.prop file which you could easily edit yourself in seconds and maybe throw a keyboard in there to make it work better. It's a start, but this ain't enough. This thing has potential, but it is wasted the moment you try to stuff a full blown tablet into your poor phone. Yet we all know our high res phones can very well handle more than silly 1-column layouts. So the magic must be in between somewhere, a place that Google must have overlooked and left blank. Yes, this rom strives to drop your device into tablet mode, but it won't stop there, it will reshape and redefine ICS to make it all a useful addition and not just a cute novelty. we're calling it: Hybrid Mode, best of both worlds.
Click to expand...
Click to collapse
Credits
PARANOIDANDROID team
Cyanogenmod
Hanthesolo + Team Supernova
Gmillz
Bbelos
DaXmax for the banner
Bug List and Fixes
(will be updated when users start reporting)
Installation instructions
Same as bbelos' CM9
Release history
beta 1
initial release
beta 1.1
added cm file manager
added apex launcher
improved pad.prop
beta 2
Updated base to LinICS v2
Added OMX libs
beta 3
Rebased off bbelos' new CM9 rom
Replaced Superuser with SuperSU (credits Chainfire)
OTA updates
beta 4
New CM9 Base - Bluetooth!
ROM Manager now works
To add Pie Controls install LMT Launcher
Coming soon
you tell me!
camera wont work? what about hw acceleration? and is this based off linaro too?
"Flash a GB kernel" is this referring to terrasilent?
FINALLY!!! I've been waiting for a PA on the 4.0 but I was a bit lazy to port it . Nice job!! Also is it possible to port MIUI? (if you want of course ).
EDIT: I found the rom nice so far however I can't seem to remove the soft keys. Do I have to put a stock framework-res.apk?
zaclimon said:
FINALLY!!! I've been waiting for a PA on the 4.0 but I was a bit lazy to port it . Nice job!! Also is it possible to port MIUI? (if you want of course ).
EDIT: I found the rom nice so far however I can't seem to remove the soft keys. Do I have to put a stock framework-res.apk?
Click to expand...
Click to collapse
i managed to remove them in settings, you have to select them and then unselect them (i know it's a bit iffy)
i don't know if i'll port miui, the yp-g70 build is quite buggy, i was thinking of AOCP...
the playa! said:
camera wont work? what about hw acceleration? and is this based off linaro too?
"Flash a GB kernel" is this referring to terrasilent?
Click to expand...
Click to collapse
First of all, how about "Thanks for your work"?
the first line says "using Hanthesolo's linaro rom as a base"
any GB kernel means any GB kernel - terrasilent, klin's, etc.
bugs are the same as linaro ics - my bad, should have made it clearer
I've ported AOCP...anyone interested? it's slightly better than AOKP
theraf said:
i managed to remove them in settings, you have to select them and then unselect them (i know it's a bit iffy)
i don't know if i'll port miui, the yp-g70 build is quite buggy, i was thinking of AOCP...
Click to expand...
Click to collapse
There is miui porter in Android Development Section. Try that.
Sent from my YP-G1 using Tapatalk 2
Neodymium said:
There is miui porter in Android Development Section. Try that.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
it's windows only, so i can't use the script, but i'll try the step by step instructions
I want to commend you (again) on your awesome work. Now, instead of maintaining 4-6 roms at once with different device trees each, I can simply focus on and improve one, providing performance and stability for you guys far faster than I would otherwise, and enabling me to push updates a lot faster.
hanthesolo said:
I want to commend you (again) on your awesome work. Now, instead of maintaining 4-6 roms at once with different device trees each, I can simply focus on and improve one, providing performance and stability for you guys far faster than I would otherwise, and enabling me to push updates a lot faster.
Click to expand...
Click to collapse
yeah, since there are no porting-derived bugs, updating the base every so often is definitely easier than building a different rom each time
now if only i could get codename-android to boot we'd have a good variety of roms!
Great Job theraf. Awesome work. So do you and anyone else know what's the difference between Codename:Nebula, Linaro, and this rom? I probably going to start changing roms again at the end of the year, but now I don't know which one to chose lol.
obscuresword said:
Great Job theraf. Awesome work. So do you and anyone else know what's the difference between Codename:Nebula, Linaro, and this rom? I probably going to start changing roms again at the end of the year, but now I don't know which one to chose lol.
Click to expand...
Click to collapse
Nebula: stock cm9
Linaro: cm9 compiled with linaro toolchain
Paranoidandroid: cm9 with some framework modifications that give it hybrid mode (i'll add a better description to the op)
Loving the rom. I cannot wait for updates to this. You guys are all very talented and we appreciate your efforts! I managed to get the layout to look nice and used Root App Delete to disable a few system apps that were broken/don't work with player, and it gave it quite a little boost.
Sent from my YP-G1 using Tapatalk 2
potatoman83 said:
Loving the rom. I cannot wait for updates to this. You guys are all very talented and we appreciate your efforts! I managed to get the layout to look nice and used Root App Delete to disable a few system apps that were broken/don't work with player, and it gave it quite a little boost.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Mind listing some of the apps that could be safely uninstalled?
Sent from my SPH-D710
Could I just maybe post a screenshot of them? If not I will make a list.
Sent from my YP-G1 using Tapatalk 2
potatoman83 said:
Could I just maybe post a screenshot of them? If not I will make a list.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Screenshot is a great idea, thanks
Sent from my SPH-D710
does this rom allow you to use the YouTube tablet ui?
These are all safely disabled...some of these you may want to keep.
**Keep on mind these are only disabled..not deleted. I don't advise deleting anything just in case.
Sent from my YP-G1 using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
install kernel
full wipe
flash rom
flash gapps
reboot into rom
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hey guys this is PA 4.1 (the CM10 VERSION) this will be the only build of this unless something major happens. i do have a 4.2 build, but that doesn't even have working camera or proper data. (i'll get screen shots up in the morning, when i wake up)
Everything that works in CM10 works in this (so nothing is broken i dont think)
ROM
GAPPS
KERNEL
IF ANYONE downloads the experimental build in the PA folder, you need the same kernel as AOSP\AOKP (and to make a phone call to get data working)
thanks to the PA Team
CM Team
Maxwen for the epic kernels
everyone who's donated
lemme know if i missed anyone
Change log
6/3/13
Fixed the sliders stuff (thanks 1ceb0x)
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
Great job loir,, I don't know how could we have managed without you.. You are doing a great job for this device...
Thank you again
Sent from my HTC One X+ using Tapatalk 2
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
Although it isn't my device, I'm just super stoked to see the One X+ getting the love it deserves, awesome job dude.
Sent from my HTC EVARE_UL using xda app-developers app
Downloading!
will test tonight! iets 8am here now have to work first
edit: dowloadlink doesn't start
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
securitymayo said:
Downloading!
will test tonight! iets 8am here now have to work first
edit: dowloadlink doesn't start
Click to expand...
Click to collapse
works fine.. it goes to the goo.im pa folder
Sent from my HTC One X+ using Tapatalk 2
Lloir said:
works fine.. it goes to the goo.im pa folder
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Tryed again, link works now
can't wait playing
securitymayo said:
Tryed again, link works now
can't wait playing
Click to expand...
Click to collapse
you might be interested in whats being uploaded to the experimental folder still got 20minutes left to upload and the README to show up in that folder lol
Lloir said:
you might be interested in whats being uploaded to the experimental folder still got 20minutes left to upload and the README to show up in that folder lol
Click to expand...
Click to collapse
Will take a look!!
OMG!! hahaha
Nice things to play with tonight
btw, i have a one x+ white with s-off
securitymayo said:
Will take a look!!
Click to expand...
Click to collapse
IF you try that build you need the AOSP/AOKP kernel and to get data working you need to make a phone call
Lloir said:
IF you try that build you need the AOSP/AOKP kernel and to get data working you need to make a phone call
Click to expand...
Click to collapse
Ok
exited!!
2hours, and i'm home, ready for flashing!!!
i see some of you have grabbed the experimental build how are you finding it??
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
mayo because you are s-off YOU NEED to flash the rom THEN boot.img in hboot as the precompiled kernel is useless
Sent from my HTC One X+ using Tapatalk 2
Lloir said:
mayo because you are s-off YOU NEED to flash the rom THEN boot.img in hboot as the precompiled kernel is useless
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Thnx,
i've also unlocked the bootloader, was already running a rom of yours
now flashing
tonight i try the normal one, have to visit my mother in law
Tomorrow i will try the 2.99 version
Edit: the CM10 paranoid rom is running, start testing now
Edit:
so far no probs..
Wiimote works
little screenglitch when pushing the powerbutton for screen turning of.
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
Just a quick question. Can I flash this on, and maybe later go back to a sense based ROM without any issues?
Sent from my HTC One X+ using xda app-developers app
mjenabi2 said:
Just a quick question. Can I flash this on, and maybe later go back to a sense based ROM without any issues?
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
Yes you can!
but you need to flash a different boot.img also when you are going back.
securitymayo said:
Yes you can!
but you need to flash a different boot.img also when you are going back.
Click to expand...
Click to collapse
that's great, giving it a try now.
i hate 4.2 roms. stupid google has made that change where all your files are moved to 0/ and it's just a pain in the...
thanks for your efforts Lloir
mjenabi2 said:
i hate 4.2 roms. stupid google has made that change where all your files are moved to 0/ and it's just a pain in the...
Click to expand...
Click to collapse
easy fix - just stick with 4.2 roms
Tested today a little bit
for people who use bluetooth headsets:
used my cardo scala rider (bleutooth headset for motorcycle riders), for music and navigation. works great!
used this rom for 24hours now, no probs!
Re: [ROM] Paranoid Android 4.1 INTERNATIONAL
Really cool:thumbup:
Sent from my E15i using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOSP Google Android KitKat 4.4 for LG Optimus G E970 E973 E971
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
Download Rom
Download Gapps
Download SuperSu
make sure you do a Clean fresh install
flash ROM
flash GAPPS - pa_gapps or Banks Gapps
flash supersu
you can wipe cache and wipe dalvik after flashes as well
Google's Open Source for kitkat 4.4 (stock aosp built from google sources)
If you like and enjoy my work please rate this thread and don't forget to hit the thanks as many countless hours goes into this
DOWNLOAD HERE
Thanks
@IOMonster - for everything he does
@chadouming
@xboxfanj
@dvhexer
@Shelnutt2
@autoprime - all his efs magic on LG phones
@slick_rick
@ayysir
all my testers and supporters
sources
google
paranoidandroid
my sources
Canadian LGOG E973/E971 - u need to flash the Canadian nfc fix.. u can find it somewhere on these fourms.
International LGOG E975/E976/E977 - you'll need to flash this kernel after you flash rom and gapps . it would be the last flash. it'll have working 13mp cam ( you'll probably need the nfc fix and you might need to edit your gps.conf and maybe APNS too.
version 1 - intial release - Nov 1
version 2 - fixed wifi
version 3 - fixed external sd support.- Nov.2
there's 3 versions of GAPPS.. . I would use the PA_GAPPS.. the other is just google_gapps and doesn't include new Hangouts whereas the PA_GAPPS has the new hangouts included.. also there's 4.4 Banks Gapps
latest Banks 4.4 Standard Gapps fixes the Calender Sync issue people are having. thanks @MiZrY
I've included a flashable kernel.. you wouldn't need to flash that but if someone else releases a 4.4 rom you could flash my kernel and use it on other 4.4 roms.. it has all my extra goodies that you would normally see from my kernels.
Simple Rules
respect each other
help each other..
please search before asking as i'm sure many others have asked the same thing.
have fun in this thread.. keep on topic..
instead of clogging up the thread use the thanks button
Damn you're fast!
Sent from my LG-E970 using Tapatalk
Do we need to flash a certain modem or just flash rom and all good? Thanks. I hate to ask if we need to flash jellybean radio on kitkat then everyone be like "ah dood yoo dum". U the man houstonn! Thanks again.
Sent from my Optimus G using xda app-developers app
Great work houstonn! Are you seeing the location service issue on your device?
Sent from my LG Optimus G using XDA Premium 4 mobile app
Att jb radio or one of the hybrids should work fine. I have tried both and they seem to both work.
Sent from my LG Optimus G using XDA Premium 4 mobile app
As always, thanks for your support brother.
When you're ready to put out your own ROM, let us know because that's what I want to run!
Sent from my LG Optimus G using xda app-developers app
What is firmware requirement for the from ? Is superuser included in Download Here folder ?
optimusv45 said:
What is firmware requirement for the from ? Is superuser included in Download Here folder ?
Click to expand...
Click to collapse
I use SuperSu just google it and download the latest version flash-able zip
You are amazin
houstonn this is why I love your work. You are one of the only devs that I have seen that gets things out this quick. Thank you for all of the hard work man, I am download right now and I can't wait to flash this bad boy. Though I do have a question. Does this have the navbar installed, and if it does can you deactivate it?
I think I'm on the ICS firmware, never got the ota. Will this work for me ?
Jank4AU said:
As always, thanks for your support brother.
When you're ready to put out your own ROM, let us know because that's what I want to run!
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
I second that
Sent from my Optimus G using xda app-developers app
If you are getting force closes on Google calendar, it appears to be because GoogleCalendarSyncAdapter is missing.
hey guys! I just flashed this rom and lost the root. I tried to install superuser and it's not installing due to binary not upto date or something. I came from rootbox rom. Please help.
xperia_2011 said:
hey guys! I just flashed this rom and lost the root. I tried to install superuser and it's not installing due to binary not upto date or something. I came from rootbox rom. Please help.
Click to expand...
Click to collapse
You have to flash threw cwm. Link in the OP
Sent from my LG Optimus G using XDA Premium 4 mobile app
I can't get into cwm. If I press volume down and power button. Device just turn on. no access to recovery.
xperia_2011 said:
hey guys! I just flashed this rom and lost the root. I tried to install superuser and it's not installing due to binary not upto date or something. I came from rootbox rom. Please help.
Click to expand...
Click to collapse
Dude, download and flash the SuperSU from the OP...problem solved.
Sent from my LG Optimus G using xda app-developers app
---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------
Rockwig said:
If you are getting force closes on Google calendar, it appears to be because GoogleCalendarSyncAdapter is missing.
Click to expand...
Click to collapse
Just uninstall it using TiBu (mentioned in Houston's original thread by someone, sorry) and reinstall from Play Store.
Sent from my LG Optimus G using xda app-developers app
xperia_2011 said:
I can't get into cwm. If I press volume down and power button. Device just turn on. no access to recovery.[/QUOTE
Its volume up + power to get into recovery...
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
iamtha1 said:
xperia_2011 said:
I can't get into cwm. If I press volume down and power button. Device just turn on. no access to recovery.[/QUOTE
Its volume up + power to get into recovery...
Sent from my LG Optimus G using xda app-developers app
Click to expand...
Click to collapse
I just did that and I get the fastboot mode screen and nothing else happens.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Q & A Thread
We encourage you all to take non-development related questions to our Q & A thread. Thank you.
This is a group effort by @Mr Impossible and @Jamison904 so make sure to thank them! They are starting a whole new experiences. Infamous Open Kang Project! AOKP is the base then we are adding what we want. They plan on adding the newest and greatest stuff all while remaining stable for the perfect daily driver. Feel free to make suggestions and please let the team know what you think. Thanks!
Additionally, keep in mind I do not have the device. If you come across any bug, make sure to please post a logcat. I cannot simply look at my phone and go..."Okay, I see what you mean."
- Source can be found here: https://github.com/IOKP
- Jamisoon904 Source - Jamison904
- Mr Impossible source - mrimp
IOKP Change log and Features
Click to expand...
Click to collapse
Standard Gapps - Download link
IOKP ROM - Download folder
IOKP Bot Dump (untested, will always have latest) - Download folder
IOKP Gapps - Download folder
Code:
Broken:
Found a bug?
[URL=http://forum.xda-developers.com/showthread.php?t=1726238]Pull a log to help me help you[/URL]
Donate to Jamison904
Donate to Mr Impossible
XDA:DevDB Information
[ROM][4.3.1/4.4][Official] Infamous Open Kang Project [jfltevzw], a ROM for the Verizon Samsung Galaxy S 4
Contributors
mgbotoe, Jamison904, Mr Impossible
ROM OS Version: 4.3.x Jellybean
Based On: AOKP
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2013-11-22
Created 2013-11-08
Last Updated 2013-11-25
Q&A
IOKP Question(s) and Answer(s)
Camera
elude79 said:
Hi All,
So far... everything seem to be smooth and fast. Loving it thanks
No Issue yet .....
But i do have a question: How's can i change the storage directory for the camera? I refer to have all video/pic to save on External SD instead internal. Thanks.
Once again..thanks Dev,
Click to expand...
Click to collapse
Sadly no that is not a feauture for the stock camera found with-in IOSP for now. I generally use 3rd party camera (personally think stock aosp camera sucks) or I am sure there is some xpose out there such as this one.
http://forum.xda-developers.com/showthread.php?t=2408880
Hope that helps atleast ^.^
P.S. Alternative camera I use is Camera360 Ultima
Alternatively...
prsterero said:
Alright guys i decided to give this a shot and was successful with... getting an EXTERNAL STORAGE STOCK CAMERA
Link: http://prshosting.org/ftp/External_Storage_Camera.zip
Just flash the zip in recovery.
I used the camera before this and the location under gallery -> 3 dots -> details was "/storage/emulated/0/DCIM/Camera/ and after pushing the new zip (now made to a flashable as seen above) the location of a new picture is "/storage/sdcard1/DCIM/Camera/" You can toggle between storage options by clicking the bottom right icon in the camera, middle settings icon, right settings icon, and selecting storage at the top.
I could not have done this alone. I found a modded version from a Galaxy S2 thread for a CM ROM and tore it apart to figure out what was changed. All credit goes to ivanceci here on XDA. His thread can be found here: http://forum.xda-developers.com/showthread.php?t=2139794
I will probably make a thread for this so others on different ROMs can enjoy the option, but since you guys were asking about it I'm delivering it here first
Click to expand...
Click to collapse
wallpaper
Maybe one more.
Sweet, Thanks! Love to see more options come to the VZ S4
gleggie said:
Sweet, Thanks! Love to see more options come to the VZ S4
Click to expand...
Click to collapse
Let us know how it goes for you ^.^
Is it just me or does the download link bring up the Sprint variant? Unfortunately didn't even notice until I wiped and went to flash. Fortunately I had a backup
Downloading the proper file now. Looking forward to checking it out.
Sent from my SCH-I545 using Tapatalk
http://www.androidfilehost.com/?a=show&w=files&flid=9324
You're right. Thanks.man.
Sent from my dark hole called an office.
Running great so far. Love the black and white theming. Only thing i'm missing is power widgets
Ironclad Lou said:
Is it just me or does the download link bring up the Sprint variant? Unfortunately didn't even notice until I wiped and went to flash. Fortunately I had a backup
Downloading the proper file now. Looking forward to checking it out.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Sorry about that, i fixed it few minutes back ^.^ all should be good now
mgbotoe said:
Sorry about that, i fixed it few minutes back ^.^ all should be good now
Click to expand...
Click to collapse
Liking it a lot so far. Nice and smooth and loving the the styling.
Sent from my SCH-I545 using Tapatalk
Great to hear! Hopefully others feel the same ^.^
Im guessing only those on mdk can flash this rom?
Sent from my SCH-I545 using Tapatalk
Kelsey Jones said:
Im guessing only those on mdk can flash this rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Its for jfltevzw, verizon gs4
do you have another device/service? odds are it may be supported already
mgbotoe said:
Its for jfltevzw, verizon gs4
do you have another device/service? odds are it may be supported already
Click to expand...
Click to collapse
No I have the Verizon s4 but im on MI1 and I have safestrap recovery ive heard that only touchwiz roms can be flashed?
Sent from my SCH-I545 using Tapatalk
Kelsey Jones said:
Im guessing only those on mdk can flash this rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
If you mean due to safe strap, then that's correct.
prshosting.org
Kelsey Jones said:
Im guessing only those on mdk can flash this rom?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Unless something's changed with Safestrap, you need to be on the mdk firmware to flash anything other than a TouchWiz based ROM. This is AOSP based.
Sent from my SCH-I545 using Tapatalk
Yeah unfortunately. Unless you guys have another work around. I too have a locked down Verizon S4. Boot strap ftw!
Sent from my dark hole called an office.
Oooh ok I understand now thank you and hopefully safe strap becomes aosp supportive soon
Sent from my SCH-I545 using Tapatalk
Thank you very much. I'll give it a spin in the morning.