After I flash my I9300 with different firmware's (LUXALE5, DBTALE5, PHNALE4, EURALE1 XXALE8) when I start the phone I get this:
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
I cant' do anything with phone because he move to slow. The only firmware without problems is the last update from samsung XXBLFB but in Kies he told me that this version it will not update in kies.
Why I get that errors and what is the solutions??? In the picture is the old firmware before to update to XXBLFB but not working without that errors anymore! I don't know from were to take that version from picture to work
I'm from Romania, sorry for my english
alexxutzu said:
After I flash my I9300 with different firmware's (LUXALE5, DBTALE5, PHNALE4, EURALE1 XXALE8) when I start the phone I get this:
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
I cant' do anything with phone because he move to slow. The only firmware without problems is the last update from samsung XXBLFB but in Kies he told me that this version it will not update in kies.
Why I get that errors and what is the solutions??? In the picture is the old firmware before to update to XXBLFB but not working without that errors anymore! I don't know from were to take that version from picture to work
I'm from Romania, sorry for my english
Click to expand...
Click to collapse
flash with odin? go to recovery, wipe/ format system. waning, backup your things..
ascariz said:
flash with odin? go to recovery, wipe/ format system. waning, backup your things..
Click to expand...
Click to collapse
YES, flash with Odin. And if I do that it will work?
First question i would ask is have you got a genuine I9300 International model .
Second if you flash with many firmwares you often have a problem Totally Confused Rom Flashers Syndrome .
Likewise Kies does not know what your phone is .
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
Are all symptoms of a bad flash .
>....
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
JJEgan said:
First question i would ask is have you got a genuine I9300 International model .
Second if you flash with many firmwares you often have a problem Totally Confused Rom Flashers Syndrome .
Likewise Kies does not know what your phone is .
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
Are all symptoms of a bad flash .
>....
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
Now it's flashed ok the Kies see him and told me this is the last firmware. I have XXBLFB original. I don't know how to look if it's an International model. I just take the firmware's from sammobile or xda and just flashed and I get that error's. Only this firmware XXBLFB it's ok without any errors.
JJEgan said:
First question i would ask is have you got a genuine I9300 International model .
Second if you flash with many firmwares you often have a problem Totally Confused Rom Flashers Syndrome .
Likewise Kies does not know what your phone is .
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
Are all symptoms of a bad flash .
>....
....................................
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
I've try what you told me and is the same thing....still get that error's. Can you give me please a link to a good stock rom to try install and see if it's the same thing with error's?
Another problem is that in QUADRANT I get only 2200 !!!!
Do factory reset from cwm and reboot.
Go to samfirmware.com for stock rom LG6 is latest,but use lg1 that is fully supported here
To get root and cwm,go to cf-root thread and flash it from Odin..
but READ before flashing, to avoid problems
zodiaxe66 said:
Do factory reset from cwm and reboot.
Go to samfirmware.com for stock rom LG6 is latest,but use lg1 that is fully supported here
To get root and cwm,go to cf-root thread and flash it from Odin..
but READ before flashing, to avoid problems
Click to expand...
Click to collapse
And wich lg1 i should downlaod for Romania because in the list is not Romania.....???
alexxutzu said:
After I flash my I9300 with different firmware's (LUXALE5, DBTALE5, PHNALE4, EURALE1 XXALE8) when I start the phone I get this:
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
I cant' do anything with phone because he move to slow. The only firmware without problems is the last update from samsung XXBLFB but in Kies he told me that this version it will not update in kies.
Why I get that errors and what is the solutions??? In the picture is the old firmware before to update to XXBLFB but not working without that errors anymore! I don't know from were to take that version from picture to work
I'm from Romania, sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I flashed XXLG6 but I lost SIM unlock.
So I tried to flash some older roms, but every time I get the same error like you.
Only rom that works is XXLG6.
Sent from my GT-I9300 using Tapatalk
Ok so LG6 it's ok? But wich one I must get for Romania?
The answer lies in post 4 and 8, look for a Romanian rom on www.sammobile.com/firmware and flash it with Odin. After that do a data/factory reset in backup and restore.
I don't know, FOR ME works only XXLG6.
I have a problem just like you, with this rom I can not use my phone because SIM is locked, and I can not flash any older rom because I get that error every time.
I hope someone knows how to solw the problem.
Sent from my GT-I9300 using Tapatalk
ckvrlj said:
I don't know, FOR ME works only XXLG6.
I have a problem just like you, with this rom I can not use my phone because SIM is locked, and I can not flash any older rom because I get that error every time.
I hope someone knows how to solw the problem.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
There are free aps on Playstore to unlock a phone like Voodoo Galaxy S III SIM Unlock. Easy to use and works fine, need root for this.
gee2012 said:
There are free aps on Playstore to unlock a phone like Voodoo Galaxy S III SIM Unlock. Easy to use and works fine, need root for this.
Click to expand...
Click to collapse
I know, but Voodoo Galaxy S3 SIM Unlock does not work on XXLPG6.
Sent from my GT-I9300 using Tapatalk
ckvrlj said:
I know, but Voodoo Galaxy S3 SIM Unlock does not work on XXLPG6.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Have same problem so I returned back to LFB and use Voodoo Galaxy S3 SIM Unlock app and it works good..
Ok, everything it's ok now, I've done a factory reset and now I have the first rom wich is ALF5!!!! My battery now it's perfectly (and no other errors)
Can anyone please upload the stock camera.apk from I9300 ALF5? please!
alexxutzu said:
After I flash my I9300 with different firmware's (LUXALE5, DBTALE5, PHNALE4, EURALE1 XXALE8) when I start the phone I get this:
1.Unfortunetely, the process android.process.acore has stopped.
2.TouchWiz has stopped
3.Contacts has stopped
I cant' do anything with phone because he move to slow. The only firmware without problems is the last update from samsung XXBLFB but in Kies he told me that this version it will not update in kies.
Why I get that errors and what is the solutions??? In the picture is the old firmware before to update to XXBLFB but not working without that errors anymore! I don't know from were to take that version from picture to work
I'm from Romania, sorry for my english
Click to expand...
Click to collapse
Hi.
The simplest way to sort out this issue is just click on settings - Application Manager - All - Contacts (Open Contacts and clear data and clear cache) - Contacts Storage (Open it and clear cache and clear data).
I faced same error after reverting back to XXBLFB from XXLG8. I flashed the LFB FW via odin. Even after clearing the Dalvik Cache and Cache via CWM the problem was not sorted out. This error is related to contacts sync. So once you clear this cache and data of contacts from given path, this error wont come again.
You have to act between the gap of this error flash. But it saves u from reformatting the whole device. Just little patience and the problem is sorted out.
Related
Hi,
I have installed Android ICS 4.0.3 in my galaxy s2 two days back, but now i want to go back to the company provided version Android 2.3.6 for india.
I tried the official firmware given in this thread
http://forum.xda-developers.com/showthread.php?t=1075278
but i am experiencing some problem and the mobile doesn't goes beyond the initial start up screen where it says "click on android logo to start"
Please anybody can tell me how to install properly the official firmware android 2.3.6 DDKL1 for Samsung galaxy s2.
Please let me know the exact steps to do and the link for files to download.
Thanks in advance.
The files you have should work fine. Did you flash.as shown in the pictures in the OP of the thread you linked?
If your getting to the android start screen your phone should boot fine. Did you click on the android to start?
Sent from my GT-I9100
Yes i did click on the android logo, It doesn't do anything rather some android process is getting stopped and i am getting popups for it.
while installing 4.0.3 i included all PDA,Phone,CSC and Pit files in odin manager and there by re-partitioned also.
the official firmware link above gives me only the PDA tar file rest of the other files i searched and downloaded dunno whether it is correct. so is it possible for you to give the full set of tar files, if u have?? or direct me to some links where i can download those.
I used the 2.3.6 xila version from remorema at this thread http://forum.xda-developers.com/showthread.php?t=1444651. Just make sure you wipe system/cache and delvik cache before you install from zip in cwm. Then it all should be fine. This presumed you have a CWM.
Hope this helps
Sent from my GT-I9100 using xda premium
It's probably interfering with something if you're getting all of the process close.
I suggest a factory data reset if you can, close your phone and go to recovery (even if its a stock rom, the original android recovery will also work) and do a factory data reset and try again.
If that still doesn't work, try re-flashing again and see what happens.
mani_vic2rious said:
Yes i did click on the android logo, It doesn't do anything rather some android process is getting stopped and i am getting popups for it.
while installing 4.0.3 i included all PDA,Phone,CSC and Pit files in odin manager and there by re-partitioned also.
the official firmware link above gives me only the PDA tar file rest of the other files i searched and downloaded dunno whether it is correct. so is it possible for you to give the full set of tar files, if u have?? or direct me to some links where i can download those.
Click to expand...
Click to collapse
If you have only 1 file then don't download any others. Just flash it as pda as shown in the picture of your linked thread.
Sent from my GT-I9100
Thanks to sxi200, Bobgnarley and AShadowX
I'll try these option and let you guy know in a day.
Hi, mani_vic2rious
If U want to revert back to ginger Stock roms, then this is your place :
http://forum.xda-developers.com/showthread.php?t=1444651
I recommend you to choose only from ginger ones, and remember thy are all from samsung, thus, not tweaked or anything. the only difference is that you can install them via CWM, for those who don't like to use Odin on windows PC.
Now if you want to stay in ICS 4.0.3 LP2 based rom, I recommend you Wanamlite V7.2 :
http://forum.xda-developers.com/showthread.php?t=1436817
U won't find more stable and functional than this.
Keys to succes in any rom installation :
1- Backup all your personal Stuff;
2- reboot into recovery (cwm) and wipe every single thing : datas, all caches (use the advance menu to wipe more things like dalvics and battery stats)
3- install your rom
4- then restore your personal stuff
As possible as you can : Always reinstall your apps from the begining and avoid restoring them from the backup you did, this always cause conflits and that's why people are always complaining, only do backup your contacts sms and other things like that.
and voilà, always stay clean as possible, and every thing will work smooth, you only need to choose the right rom.
I hope this helps!
mani_vic2rious said:
Thanks to sxi200, Bobgnarley and AShadowX
I'll try these option and let you guy know in a day.
Click to expand...
Click to collapse
Also make sure you have flashed back the old Gingerbread bootloaders from that thread.
I swear this gets asked daily...
I had some issues also. Reboot to stock recovery. Data wipe. Reflash stock firmware through Odin. That seemed to work for me
Hi kimifender,
The wanamlite installation says "signature verification failed" while installing, anything to do with it??
I've flashed data and cache and reverted to 2.3.6, now it is working fine. anyhow if i can able to install wanamlite i'll try that too. Please sugest me.
Thanks for all who have helped me in solving the issue
but now the only issue is my kies is not detecting the version. anything else i have todo for this??
Hi,
Could anyone help in this issue??
The wanamlite installation says "signature verification failed" while installing, anything to do with it??
mani_vic2rious said:
Thanks for all who have helped me in solving the issue
but now the only issue is my kies is not detecting the version. anything else i have todo for this??
Click to expand...
Click to collapse
You need an original firmware with matching product codes .
Kies or Odin /CWM not both .
jje
Hi guys,
Could someone help me in whether any FM Radio APP will work in [ROM][13 Fev]WanamLite V8.4 ICS 4.0.3 LPB & 14 toggles & Fast ICS Themed??
I couldn't post reply on thread as my total post is below 10.
Pls help me..
Hi friends.
I have galaxy SII and just yesterday i update to official ICS (Greece) .
I didn't see any difference so i rooted , in order to be able to install customs ROM.
So i did but i don't like it and i thought that is good to revert back to official ginger , for my country.
I download from sammobile the following firmware I9100BUKJ3 and i uploaded to my phone through Odin.Everything is uploaded fine.
But the problem begins at the boot .....The first wizard for configuration of the phone cannot executed, throws an error and the android cannot tapped.
What should i do in order to make the phone operation again?????
heavyweight80 said:
I had some issues also. Reboot to stock recovery. Data wipe. Reflash stock firmware through Odin. That seemed to work for me
Click to expand...
Click to collapse
worked for me too
Hi,
Just "upgraded" from an old Cyanogen ICS (didn't use the phone for more then a month) to the LPQ Samsung ICS through Odin.
I did wipe cache and dalvik.
Samsung ICS seems to work just fine, however the camera fails. Flashed back a recent Cyanogen rom (cm-9-20120318) and also here the Camera fails.
Camera worked fine when still on unrooted GB 2.3.6 last time I checked about 2 months ago, and I haven't dropped the device afaik.
My guess is that while flashing roms about 2 months ago I did something wrong somewhere... Maybe overwrote the camera firmware with something stupid?
Is there a way to get the camera to work again?
Thanks for listening..
Im not that technically minded but isnt there a firmware update for the camera on the "samsung apps"..er..bit of the phone? maybe installing that will fix it?
Thanks, installed it (on ICS) ...
But the update program crashes...
I think I am going to follow the bricked phone procedure....
Unless someone has a better idea
Well, unfortunately I can't find a original rom package with pit file and the lot (seems to me this comes most close to a very fresh install)
Thought to do this:
http://forum.xda-developers.com/showthread.php?t=1449771
But the rom has been deleted from hotfile
Do not use PIT file .
#
jje
Did you try to flash the kernel cf kernel again?
Sent from my GT-I9100 using XDA
JJEgan said:
Do not use PIT file .
#
jje
Click to expand...
Click to collapse
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net... I was thinking this could also unbrick my camera as part of the unbricking process...???
DaKiii said:
Did you try to flash the kernel cf kernel again?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I flashed the root kernel, didn't help (if that's what you meant)
Gede said:
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net...
Often copied from other sites i prefer to use the FAQS and Guides on this site rather than bits and pieces from all over the place .
I would .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Click to expand...
Click to collapse
JJEgan said:
Gede said:
Why not ?, this seems the way to unbrick a phone, and the instructions to use the pit file are all over the net...
Click to expand...
Click to collapse
Often copied from other sites i prefer to use the FAQS and Guides on this site rather than bits and pieces from all over the place .
Click to expand...
Click to collapse
Yes, so do I. And actually the instruction to flash with a pit file is from a guide from this site:
http://forum.xda-developers.com/showthread.php?t=1449771
JJEgan said:
I would .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem . etc
Click to expand...
Click to collapse
Like I said, I am afraid I messed something up while flashing some time ago. (got a Gnote, so didn't bother so much) Flashing a recovery won't hurt (if I can find the damned I9100XXKI3.rar with the pit and such) and I already flashed an official fw, with clean caches and so.
Do note that bricking and firmware aren't even remotely connected. What you're describing sounds like a camera firmware problem and flashing won't help you.
Call *#34971539# and check your Phone/Cam Fw version. What do you see?
Use a stock rom for your phone and try to flash new firmware via Samsung apps or take it to a service center.
bpivk said:
Do note that bricking and firmware aren't even remotely connected. What you're describing sounds like a camera firmware problem and flashing won't help you.
Click to expand...
Click to collapse
Ok, Got back to official 2.3.5 (flashed with pit), Camera still doesn't work "Camera Failed".
bpivk said:
Call *#34971539# and check your Phone/Cam Fw version. What do you see?
Click to expand...
Click to collapse
The Factory Test Program force closes. No info, just a crash
bpivk said:
Use a stock rom for your phone and try to flash new firmware via Samsung apps or take it to a service center.
Click to expand...
Click to collapse
Installed 2.3.5, and the Camera firmware update program. This program also force closes.
Now, I'll try to flash kernel and bootloader, as in the recovery post.
Flashed Kernel and Bootloader as in the recovery post, did not help. still "camera failed", *#34971539# still crashes Factory info, Camera FW Update program still force closes.
What more can I do to get the camera working again??
(I must have messed up something while flashing some time ago, I remember also seeing a "dead" android character with his belly open while rebooting in recovery few times...)
Oh, btw, even with non rooted official firmware and kernels, Kies says it cannot update the firmware (2.3.5 and 4.0.3)
Is this because my flash counter is at 4 now, or is there another reason?
Sent from my GT-N7000 using xda premium
Please anyone?
How can I get my S2 in original state again with working camera, please?
What can I flash?
Sent from my GT-N7000 using xda premium
I have the same problem, and bad news is that it is not the software issue, it is a problem with hardware. I just discovered (just now ) when i press the phone hard (around simcard area) the camera works fine! Hope this is just loose connection. Going to get my screwdrivers right now...
My E4GT has been acting identical!! I also tried reinstalling EVERYTHING. After reading your posts I starting pressing around on the back of my phone with the back cover off and the camera starting working. Thanks for pointing me in the right direction...
same problem
Black screen again
Same problem again!
My phone accidentally spent some time in a bucket full of water (over a minute!). Took me almost an hour to get it working, but unfortunately the camera wasn't working again (black screen). As I have had some bad experience with the camera before, disassembled my phone, disconnected the camera, carefully cleaned everything and I put it all back together. Camera working again!
The whole process is very easy and took me about 20 minutes!
Same problem!
My phone after falling down the camera stopped working (black screen). I changed the camera did not work.
can you help me?
thanks
Hello,
I put the stock firmware of my S3 for the waranty but now I have an "CSC : unknown"
I have tried many firmware but can not restore the situation !!
Do you have an idea?
Thank you in advance
go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.
Thanks for your reply..but i have only one CSC "AUT"
I try another stock firmware !
Stock roms thread CSC post flash CSC .
jje
shinichi_c00l said:
go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.
Click to expand...
Click to collapse
I tried this when I used the suggested firmware downloaded from Fuscheck (BTU) I'm on O2.
When I typed it in on the keypad I got BTU displayed, clicked it and install, then I got an error saying something like 'must be at least THREE'
It won't install I managed to resolve the situation by downloading and flashing a firmware from Sam-Mobile, but I don't understand my issue, every time I want to upgrade my firmware I have to completely wipe the phone,. (OK I have titanium backup) but that's not the point. Surely there is a way of ODIN flashing a new firmware then re-rooting, without factory reset every time.
Is Fuscheck the best place to get the firmware upgrade?
Any suggestions/ ideas on my situation would be grateful, I can't really be spending half a day trying to unbrick the phone every time there's a update
Joe
You can download roms from www.sammobile.com/firmware. Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium
gee2012 said:
You can download roms from Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for that. Helpful post.
I normally use Odin on my PC, and just flash through PDA.
I am rooted so is it just a case of flashing firmware from Sammobile then rooting the phone again (I use CF Root)
Hey
I bought a used s3 so i dont have any idea whether the phone is carrier locked or not but it was rooted when i got it and was on 4.0.4 i wanted to update it and it took me quite sometime to figure it out
I tried odin and many other softwares in start but no success anyhow later on one night my phone was about to turn off and i had to keep it on so i removed the battery stats and the next morning whenever i made a call the call would last for about 6 mins and in the same time cell would show a message i.e. process.adroid.com.phone has stopped working when i pressed OK the signals would go away and after 2-3 secs they would come back on the same hand when somebody called me i wasnt able to pick their calls because the same message i.e. process.adroid.com.phone has stopped working would pop up.
Anyhow finally after 4-5 days i thought of flashing a custom rom becuz i though i had corrupted my modem so i downloaded this file
downloadandroidrom.com/file/GalaxyS3/roms/leaked4.2.2/Rooted-I9300XXUFME3-4.2.2.zip
and flashed it. It was in hebrew i guess and after flashing it i stopped getting sound on call both when i received one or made one. I got a YELLOW BOX as well on home screen and app screen. Rest was working fine sim card was detected, i could use whatsapp, listen to songs, wifi worked fine, in short everything except calling worked fine
Then a friend of mine told me that i had installed a wrong rom so he gave me a link and i flashed this rom this time
omega-roms.net/blog/?page_id=763
Version 43.5
I.e. Jb 4.1.2
After flashing this rom i am still getting the yellow box that i got when i flashed my phone to 4.2.2 and i m stuck with emergency calls only everything else works fine. I have checked emei it matches that on the back of phone
Information regarding my phone is
Model Number: GT-I9300
ANDROID VERSION: 4.1.2
BASEBAND VERSION: I9300XXEMA5
Older baseband was
I9300BULE6
It had vodafone app as well before i flashed that jewish ROm
KERNEL VERSION:
3.0.31-1160235
[email protected]#1
SMP PREEMPT tue apr 23, 17:41:26 KST 2013
BUILD NUMBER
OMEGA V43.5-XXEMD3
Please help me out!
1st of all next time buy the phone from someone trusted i bought mine from a close friend and it was almost like new
as for your problem i think it's the sim card doesn't work since the phone might be locked so try galaxy sim unlock from google play if that's the problem you should get the network back
Come on it was working fine a few days back there must be a solution!
zunairaatta said:
Come on it was working fine a few days back there must be a solution!
Click to expand...
Click to collapse
try to factory reset wipe cache dalvik cache and format everything then install the newest leak
if this doesn't work maybe there is something more of a problem than software
Blackwolf10 said:
try to factory reset wipe cache dalvik cache and format everything then install the newest leak
if this doesn't work maybe there is something more of a problem than software
Click to expand...
Click to collapse
Have done all this. Please read the post i had 4.0,4 then i flashed to 4.2.2 and downgraded to 4.1.2 now have wiped dalvik cache, cache and also had factory restored it
NO use
Isnt there anyway that i can check whether the phone is unlocked or not?
btw i cant remove the microsim either :?
Blackwolf10 said:
try to factory reset wipe cache dalvik cache and format everything then install the newest leak
if this doesn't work maybe there is something more of a problem than software
Click to expand...
Click to collapse
Blackwolf10 said:
1st of all next time buy the phone from someone trusted i bought mine from a close friend and it was almost like new
as for your problem i think it's the sim card doesn't work since the phone might be locked so try galaxy sim unlock from google play if that's the problem you should get the network back
Click to expand...
Click to collapse
Phone is unlocked says galaxy sim unlock app SO? What can be the problem?
zunairaatta said:
Phone is unlocked says galaxy sim unlock app SO? What can be the problem?
Click to expand...
Click to collapse
i am not sure but seems more than just a software problem
by the way did u check with the sim tray ??
zunairaatta said:
Have done all this. Please read the post i had 4.0,4 then i flashed to 4.2.2 and downgraded to 4.1.2 now have wiped dalvik cache, cache and also had factory restored it
NO use
Isnt there anyway that i can check whether the phone is unlocked or not?
btw i cant remove the microsim either :?
Click to expand...
Click to collapse
You may want to go back to the stock rom using Odin and see if this fixes the issue. That is the only thing I can suggest at this point since you said you've done everything else. When you bought this phone did you swap the sim card? You may also want to get that replaced and see if that works. Good luck.
Sent from my Synergized S3 using Tapatalk 4
Blackwolf10 said:
i am not sure but seems more than just a software problem
by the way did u check with the sim tray ??
Click to expand...
Click to collapse
Yes finally i have removed the microsim using pin i want to see if the same issue persists with any other sim. The sim module must be fine becaue when i removed the sim card it showed insert sim card
About hardware problem. How can you say that? I could make a call 6 mins long and couldnt receive it on my prev 4.0.4 version then later on on Jb 4.2.2 i was able to make calls but with no sound but now i get emergency calls only So this is not a hardware problem and the baseband has changed can it be the reason?
The app says the phone is unlocked so is it actually unlocked or is there any hard secondary lock which this app is not able to detect?
No useful replies yet?
people please i need help
zunairaatta said:
No useful replies yet?
people please i need help
Click to expand...
Click to collapse
Please read the rules this is not a fix your phone service centre . If you want help don't be rude . Start at the beginning the original post is confusing and much of the process carried out are wrong . Start by factory reset phone and then flash the stock firmware via Odin from sammobile.com that is for your phone and network .But not any 4.2.2 version . Alternative if you are rooted and have CWM recovery is to format sd card system cache data and preload . Boot to download mode and flash stock rom via Odin . Then check your IMEI matches that under the battery . Test phone . jje
JJEgan said:
Please read the rules this is not a fix your phone service centre . If you want help don't be rude . Start at the beginning the original post is confusing and much of the process carried out are wrong . Start by factory reset phone and then flash the stock firmware via Odin from sammobile.com that is for your phone and network .But not any 4.2.2 version . Alternative if you are rooted and have CWM recovery is to format sd card system cache data and preload . Boot to download mode and flash stock rom via Odin . Then check your IMEI matches that under the battery . Test phone . jje
Click to expand...
Click to collapse
Hey relax i m not being rude i said please i am in dire need of help and in Pakistan a very few number of people have any idea about rooting so i cant go to a software house too
So please i request you to help me
zunairaatta said:
Hey relax i m not being rude i said please i am in dire need of help and in Pakistan a very few number of people have any idea about rooting so i cant go to a software house too
So please i request you to help me
Click to expand...
Click to collapse
You have been answered follow the answer.
You would be far better to read the faqs and guides first as you do not have a clue as to what is what .
jje
JJEgan said:
You have been answered follow the answer.
You would be far better to read the faqs and guides first as you do not have a clue as to what is what .
jje
Click to expand...
Click to collapse
Could there be some hardware issue with my phone?
In any case, do factory reset, you may use the full wipe script and delet Google Accounts.
ofic.fw.přes flash odin 4.1.2 and all login again
zunairaatta said:
Could there be some hardware issue with my phone?
Click to expand...
Click to collapse
Possible
But biggest problem is that OP has not a clue due to not bothering to read faqs and guides .
Has probably messed everything up as every step has been clueless and wrong .
AGAIN
Start by factory reset phone and then flash the stock firmware via Odin from sammobile.com that is for your phone and network .But not any 4.2.2 version . Alternative if you are rooted and have CWM recovery is to format sd card system cache data and preload . Boot to download mode and flash stock rom via Odin . Then check your IMEI matches that under the battery . Test phone . j
Hello, I have a Galaxy S3 (GT-I9300) phone that is not feeling so well.
On startup it freezes indefinitely on the Samsung boot logo.
I am able to get into recovery and download mode.
In recovery I get errors - unable to mount Data, and unable to mount EFS.
The phone is recognized by the computer, both in Kies and Odin so flashing is possible.
It is not rooted and completely stock. Problem is that I don't know what version firmware it had.
There is unbacked information on the phone I'd like to recover.
What I've tried: Within Kies>Firmware upgrade and initialization (second option under tools) I enter the model number and then the serial, but I just get a message along the lines of "please check your model" (I entered GT-I9300).
The phone is generic international version from 2012, untouched (version-wise) since.
I very much appreciate any idea that might fix this. How can I find the right firmware? will it erase my memory? how can I restore the EFS partition?
Stock Rom
Hey there. Creat a free account on the Sammobile Website. Than you can download this file from here:
HTML:
http://www.sammobile.com/firmwares/3/?download=33625
Flash it through odin as PDA. Should work fine
Tkkg1994 said:
Hey there. Creat a free account on the Sammobile Website. Than you can download this file from here:
Flash it through odin as PDA. Should work fine
Click to expand...
Click to collapse
Will it work even though it is intended for Android 4.3? The phone originally came with 3.0 or 3.1
Also I believe flashing firmware will not fix EFS?
Jup
Yes it does. It comes with 4.0.4 out of the box And it will work
Tkkg1994 said:
Yes it does. It comes with 4.0.4 out of the box And it will work
Click to expand...
Click to collapse
YES! the new firmware fixed it completely. It is a bit slow, but alas that's probably the phone itself.
To anyone looking in the future:
This problem was caused by a faulty battery - the phone would turn off while working all the time, and eventually it corrupted the data and efs partitions. To my luck upgrading to new firmware fixed the problem.
Thank you.:good:
TCUENGR said:
YES! the new firmware fixed it completely. It is a bit slow, but alas that's probably the phone itself.
To anyone looking in the future:
This problem was caused by a faulty battery - the phone would turn off while working all the time, and eventually it corrupted the data and efs partitions. To my luck upgrading to new firmware fixed the problem.
Thank you.:good:
Click to expand...
Click to collapse
No Problem man. Your welcome
Tkkg1994 said:
No Problem man. Your welcome
Click to expand...
Click to collapse
I have a very important question with this methode.
Is the phone going back to factory settings??
A friend is having the same problem with his S3, but there are some very impotant pictures of him and his wife on the phone that we try to save(she died a view months ago)
My excuses for the bad english
Greating JW