Disasterrrrrrrrrrrrrrrrr - Nokia Lumia 800

please help guys im in a real trouble
first of all im new on wp7
in all cases when i tried to flash a new rom, after windows detected and installed some updates i gor external drive and it was ( must be ) format, so i formated...then plug phone with usb and volume up detected qualacomm .... and istallation of driver failed, pluged usb with volume down qhsusb dload detected and failed also to install driver and from that time till now i cant use mz phone, screen is black phone never on nor off no vibration as it is switched off BUT once plugged with pc it detects the dload again,......no i dea what to do at all

In every thread that has a rom or an app for unlocking the phone it says
DO NOT FORMAT
Why are people still formatting ?
I don't think you can recover a phone once you formatted it yet (Unless I missed a trick)

*Detection* said:
In every thread that has a rom or an app for unlocking the phone it says
DO NOT FORMAT
Why are people still formatting ?
I don't think you can recover a phone once you formatted it yet (Unless I missed a trick)
Click to expand...
Click to collapse
honestly i didnt read that state....and its my first wp7 ever i manage to hold
forget about the format now, is there is anyway to install the driver for qhsusb-dload or what ever its name ???

mrlove6 said:
honestly i didnt read that state....and its my first wp7 ever i manage to hold
forget about the format now, is there is anyway to install the driver for qhsusb-dload or what ever its name ???
Click to expand...
Click to collapse
No, because you formatet your device ... you can call it "dead" ... Send it to Nokia.

Your phone is now a brick. Never ever format it...

dannejanne said:
Your phone is now a brick. Never ever format it...
Click to expand...
Click to collapse
yep. Its now just a paper weight.

thats bad,thats what i like about iphone,its very difficult to brick one(just my experience)

there is no soulution to this problem i'm afraid I did the same thing I took it to my Nokia Care Centre. I just lied and Nokia Care fixed mine, I said there was an update on zune and halfway my phone freeked out and went off halfway and hasn't come back on since

mathen said:
thats bad,thats what i like about iphone,its very difficult to brick one(just my experience)
Click to expand...
Click to collapse
you can brick an iphone just as easy doing the same thing. You have to understand hacking a phone like this isnt a feature of the device you are actually going through a backdoor and one the phone company would rather keep shut. If you cracked an iphone and formated it you would have the exact same issue. This is why when these guides are written you go at it at your own risk and voiding warrenty.
Rocalino has the right idea take it to Nokia and lie like you mean it. You will talk to someone who really doesnt care much as they still get paid at the end of the month so should replace it for you. But as i think you can see from others on here it is vital that you carefully read everything then double read it to be sure even if it seems to be something simple.

mathen said:
thats bad,thats what i like about iphone,its very difficult to brick one(just my experience)
Click to expand...
Click to collapse
This has nothing to do with WP or the fact that iPhone is unbrickable (which it isn't). Sorry, but it was your fault only, next time read the instructions carefully.

Related

[Q] Is my hd2 bricked?????

I just got a HD2 Tmobile
i decided to download this ROM (Official HTC WM6.5 ROM Upgrade for HD2. It seemed safe it said official
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
I downloaded it and installed it now my HD2 wont turn on NOTHING! NO SCREEN! wont charge NOTHING.. I have no idea what to do. did i brick the phone?
When i plug the USB in the computer does find it, it comes up in device manager as qualcomm CDMA and base system device.
i was running a downgraded ROM before, and i didnt like it soo i wanted to upgrade.
Any help would be appreciated thanks
go to bootloader mode,press volume down and softreset button(red button down battery cover)
and try to connect your leo with usb cable
and flash ROM TMOUSE not EU
Its a yellow button. Should i press it while holding down the volume button while its connected to the computer??
you can connect on pc,before or after,it's same
IT wont display a screen at all. I pressed the button and the volume button. NOTHING.....
Your radio version seems to be 2.04.50_22_2 if I am not wrong
Does TMOUS support that? its for International/European version of HD2
Im not sure but my phone will NOT turn on at all. Any idea what i can do to fix this? thanks.
Yes, your HD2 is bricked. The radio that you flashed is not compatible with your device.
There is a difference between the US Version and the rest of the world ( hence the two different fora ).
Try looking here http://forum.xda-developers.com/showthread.php?t=653614 and possibly here http://forum.xda-developers.com/showthread.php?t=668347
pkoper said:
Yes, your HD2 is bricked. The radio that you flashed is not compatible with your device.
There is a difference between the US Version and the rest of the world ( hence the two different fora ).
Try looking here http://forum.xda-developers.com/showthread.php?t=653614 and possibly here http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
I second...
IMPORTANT: Do not flash ANY Radio before 2.07.x or the 2.09.51.03 Radio or you could damage your phone!!
and you put 2.04.50_22_2
hi! if you have the good radio and good rom, look if you have a good connection with your battery cause i haved a probleme like this and my battery wasnt connect.
thats kinda stupid who designed this phone anyway. you should be able to format the drive somehow and flash another operating system. stupid microsoft and windows mobile screwed me over again.
I guess i have to throw this brand new hd2 into the garbage now its useless.
awwww, would you like to donate the paperweight to me? Thanks
drugsbunny666 said:
thats kinda stupid who designed this phone anyway. you should be able to format the drive somehow and flash another operating system. stupid microsoft and windows mobile screwed me over again.
I guess i have to throw this brand new hd2 into the garbage now its useless.
Click to expand...
Click to collapse
Sorry for that mate...
It is very sad.....
drugsbunny666 said:
thats kinda stupid who designed this phone anyway. you should be able to format the drive somehow and flash another operating system. stupid microsoft and windows mobile screwed me over again.
I guess i have to throw this brand new hd2 into the garbage now its useless.
Click to expand...
Click to collapse
wait a minute.
You download unlicensed WRONG software on your phone and you are blaming microsoft????
Why would you install a euro ROM (an old one at that)?
If you obtained the phone through legal means, either your carrier or htc will replace it. Just tell them the phone quit working and don't mention that you tried to update it.
And next time try reading first.
drugsbunny666 said:
stupid microsoft and windows mobile screwed me over again.
.
Click to expand...
Click to collapse
sure, this is all their fault. perhaps going to iphone would be better for you.
drugsbunny666 said:
thats kinda stupid who designed this phone anyway. you should be able to format the drive somehow and flash another operating system. stupid microsoft and windows mobile screwed me over again.
I guess i have to throw this brand new hd2 into the garbage now its useless.
Click to expand...
Click to collapse
You have a self inflicted paper weight , you will get very little sympathy here.
A little reading and searching would have prevented this.
You chose to dive in at the deep end.
Trying to blame microsoft or HTC for your error is childish.
drugsbunny666 said:
I just got a HD2 Tmobile
i decided to download this ROM (Official HTC WM6.5 ROM Upgrade for HD2. It seemed safe it said official
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
I downloaded it and installed it now my HD2 wont turn on NOTHING! NO SCREEN! wont charge NOTHING.. I have no idea what to do. did i brick the phone?
When i plug the USB in the computer does find it, it comes up in device manager as qualcomm CDMA and base system device.
i was running a downgraded ROM before, and i didnt like it soo i wanted to upgrade.
Any help would be appreciated thanks
Click to expand...
Click to collapse
Dam thats one big fat FAIL
But a phone should be designed like a computer. IF you screw up software on a hardrive you can always format it and install new software. so i assumed this is how it works with every device... you can never permanently screw up a computer by installing wrong software on it.
Blackberrys, nokias, iphones dont have this problem, you can install whatever operating system you want on a blackberry and it will work fine. and worst comes to worst you can format the device and reinstall another OS.
WINDOWS MOBILE= GARBAGE
what a waste i had the HD2 for less then a week!!!!!
Heh. Try installing the wrong bios on a motherboard and see if reformatting the hard drive helps.
The OS is not related to your problem. Its the RADIO that bricked your phone. Other brands you named have pretty much the same risks. Read the stickies, it is really made for dummies. Now you are too late, better luck next time (when bricking your Iphone when updating from IOS3 to IOS4...)

[Q]HELP Bricked SGS2?

Hello Guys!
My friend bought a SGS2 and he whanted to root it and to put MiUi on it. Now he unpluged it while it was in the Odin doing something with PIT...
It stopped and now he can't go anymore in the download mode and the phone remains black...
is that a full brick? is there any chance to run it again?
do you need more informations?
I looked throuth the threds but i couldnt find something like that...
i hope anyone can help
Will Samsung repair that with Warranty?
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
BlackRainX said:
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
Click to expand...
Click to collapse
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Oli28 said:
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Click to expand...
Click to collapse
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
achillies400 said:
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
Click to expand...
Click to collapse
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Oli28 said:
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Click to expand...
Click to collapse
It's not the most correct thing to do (actually, not at all, it was your friend's fault entirely, also voiding the warranty), but your friend can tell them that the device began to heat while charging, he unpluged it and it died, sometimes it happens...
As for the JTAG you asked on the other post, it's a physical connector inside the cellphone used to write the flash memory, it involves opening the device, pinning some terminals and programming via PC, it's pretty common on embedded devices to load the program for the first time.
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
pankajkundalia said:
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
Click to expand...
Click to collapse
Won't work if the PIT wasn't completed therefore leaving the device void of a bootloader, but it's worth the try, you have nothing to lose...
Wow, nice will try today... I will get the phone... would get a free Pizza if i would make it work again! thank you guys for your answers. I will tell you what happend...
is there a how ti for jtag? Could Be the solution...
Sent from my Desire HD RUNNY using XDA App
How to JTAG:
You had to solder stuff, it's safer to try warranty
Omega Frost said:
How to JTAG:
You had to solder stuff, it's safer to try warranty
Click to expand...
Click to collapse
Thank you!
suddenly this with the battery didnt worked so im gona send it to the warraty....
And when they dont repair it for free or less than 50 $ I have to send it to the JTAG..
thank you guys for all your support
Afaik u never supposed 2 use pit options in odin for gs2 otherwise u end up with a brick anyway regardless if u remove the cable or not. perhaps read more and be more careful if u ever decide 2 flash again. i would not be happy with that friend lol.
Sent from my GT-I9100 using xda premium

Hard brick!

so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
fcortes626 said:
so after hard bricking my device: http://forum.xda-developers.com/showthread.php?t=1731445 i got it into some kind of download mode. i also managed qpst to see my phone but i dont know how to use that. not sure if fastboot would recognize the phone in that download mode. i just wanted to know if there was a way to pull the stuff i had in the internal sd card like adb pull but adb wont see the phone. tmobile told me to go tomorrow so they can exchange it for another one but before i bricked it i copied some of the pics and vids from the camera 2 times using root explorer. the first time i didnt get all of them and the second time they all say they they were corrupted.
Click to expand...
Click to collapse
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
taygutta said:
How were you able to get the phone on??Im in the same boat!Help me power on my phone please. Can you also link me to that driver you used?
Click to expand...
Click to collapse
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
What did you guys flash?
bizdady said:
What did you guys flash?
Click to expand...
Click to collapse
i was stupid enought to try and flash cm9 fromthe international version. i just changed the build prop and the boot.img lol :silly:
The omega rom.. anyone No how to recover data from a dead phone?
taygutta said:
Ok I went to best buy and im waiting on a new one BUT I really need the data off the bricked phone. Where can I find qpst? Does it see your phone when you hook it up?
Click to expand...
Click to collapse
search it on google. its free but its not easy to use. if you dont nkow what you are doing yo could even make it worse. some one with a working phone needs sto get some hex files and stuff.
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
No nothing works. Completely dead. Ima try using a jig
bizdady said:
Thats odd, I read of some that flashed INT roms and were still able to turn on and use mskip's fix. Battery pulls wont do anything?
Click to expand...
Click to collapse
nope. no download mode and no recovery.
taygutta said:
No nothing works. Completely dead. Ima try using a jig
Click to expand...
Click to collapse
i have read the jig wont work on devices that show a blank screen.you can try it tho. worth a try. i was going to try it but by the time the jig gets to me id rather just go tomorrow and hope tmobile actually does exchange it.
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
taygutta said:
I think I have the Qualcomm tool but I have no idea how to use them.
Ill look into this JTAG.
I just want the data off the phone.... thats all
Click to expand...
Click to collapse
Hunt3r.j2 said:
JIG will be a no-go, your only hope is either to try and use Qualcomm internal tools (which are not found on the internet) to flash, or JTAG.
DO NOT TRY TO FLASH ANY INTERNATIONAL ROMS EVER, YOU WILL HARD BRICK ON THESE PHONES!
Click to expand...
Click to collapse
yup now i learned my lesson. the qualcom tool is the qpst i was talking about. but you need the files to flash to it. i think your files are lost bro. unless you send it to samsung so they can fix it. i dont think if they flash it will delete your files since they wont flash to the sd card partition. but then again im not sure if they will notice if you were rooted. next time im saving all my stuff into my external sd
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Not surprisingly to see people who ruin there device and want to exchange it for another. Of course even though it was there own fault for ruining it they shouldn't have to pay for the replacement.
Makes perfect sense for companies and carriers not to support rooting/flashing. Its bad enough already.
taygutta said:
Yea, now I just await the call from Bestbuy about getting more in. My JIG comes in tomorrow so we will see.
Click to expand...
Click to collapse
you could of also made your own lol
fcortes626 said:
My phone doesnt turn on. the screen is blank but when i plug it in to the pc i could here the usb tone on my pc. i think you can flash back using qpst but i dont know how to use it and the files are different than the odin files. just go back to where you bought it and tell them it wont turn on. just dont say you rooted it.
these are the drivers but they are for 64bit windows:
http://forum.xda-developers.com/showpost.php?p=14909282&postcount=19
Click to expand...
Click to collapse
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
fcortes626 said:
you could of also made your own lol
Click to expand...
Click to collapse
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Sniper_5 said:
That is the reason Motorola locked their bootloaders, and others have raised insurance premiums. Please don't lie. Its insurance fraud first of all. If you ruined your device by flashing non-stock ROM's and such its time to man up, and dish out the money for a new phone. Don't make other's pay for your mistakes/missfortune. Do some more research on the other method of flashing and see if you can fix it. I wish you luck.
Sent from my DROIDX
Click to expand...
Click to collapse
that was not helpful:crying: and i dint lie. i told the truth. i said "it wont turn on" and they didnt ask why. and i guess you dont read much. its hard bricked meaning you cant recover it unless you have the software samsung uses. so stop trolling my thread bro. read and you will notice i have tried to recover it.
taygutta said:
Ha! I tried that.... fail!!!!! I cant figure out which pins are 4 and 5.
Click to expand...
Click to collapse
me too lol

Is it possible to completely Hard Brick the LG G2?

I'm just wondering if you can completely Hard Brick a LG G2 to a point, where there is no revive possible.
I can purchase a cheap LG G2 international version, but the seller says that he broke it during flashing a Kernel.
Can you for example revive a phone,that had a Kernel from completely different phone flashed?
Any insight would be greatly appreciated.
Sent from my C6503 using Tapatalk 2
If it's true he only flashed a new kernel then u can restore it. If he messed with the partitions then.... No. If he used a broken usb cable and fried it....
Well ask to try the phone before u by it. Also check if it's stolen
Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
When he connects the Phone to his Computer, it shows multiple Mass Storages, but the LG Software doesn´t recognize it.
Is this a common problem, that is easy to fix, or should I rather wait for another Deal to come up.
p.s. I asked him for a receipt, and he says that he has one.
E-I-K-E said:
Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
When he connects the Phone to his Computer, it shows multiple Mass Storages, but the LG Software doesn´t recognize it.
Is this a common problem, that is easy to fix, or should I rather wait for another Deal to come up.
p.s. I asked him for a receipt, and he says that he has one.
Click to expand...
Click to collapse
If the guy was updating through TWRP, he probably have some knowledge on the matter, and the chances that he bricked it for good is high.
When I messed up my G2 a few times, being able to enter in download mode was the hint that the phone was revivable, if him really can't enter the download mode, then it is probably a bigger problem.
But the question is, by buying this possible lemon, how much will you be saving compared to buying a brand new?
If it's showing up like that, if you have a Linux machine you may be able to use dd to flash factory images to the partitions. There is a guide to it somewhere on here. But even if you were successful in flashing those, it really depends on how badly he screwed it up. In particular I really hope he didn't damage or wipe his efs. Or at least has it backed up.
Honestly, I'd point him to the right guides and have him fix it. If he screwed up his efs, or messed the partitions up, or fried something, it's dead and not coming back. If all he did was flash a kernel in twrp and it was actually from this phone and it was just a bad download or flash or something, then you'd probably be okay, but if that were the case you'd get a secure boot error and still be able to enter download mode. Personally, I would not buy a phone that won't boot, especially if the seller isn't even sure what's wrong with it.
Sent from my LG-G2 using Tapatalk
sounds recoverable, if there is a backlight and mass storage comes up that's good, you can dd partitions with linux
no backlight + no recognizable usb device at all = bricked
still, buy at your own risk
It is.. i just did by flashing a broken rom.. sent it to the repair center and they replaced the motherboard
Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those
E-I-K-E said:
Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those
Click to expand...
Click to collapse
Just look up a guide on how to install an Ubuntu virtual machine. You should be able to connect your G2 to that virtual if you let it capture the USB port. If you can get it cheap, buy it and try to negotiate so you might have a chance on selling it for higher later on if you can't fix it. To me though, it sounds quite fixable, I would go for it.
E-I-K-E said:
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
Click to expand...
Click to collapse
this doesn't really matter, when I was trying to mess with the bootloader and corrupted it a few times I've never had the LG logo, as long as it comes up as storage you can DD it - the only time its a true brick is with no backlight and no usb device
if theres no boot logo you probably need to DD the aboot in
dr87 said:
this doesn't really matter, when I was trying to mess with the bootloader and corrupted it a few times I've never had the LG logo, as long as it comes up as storage you can DD it - the only time its a true brick is with no backlight and no usb device
if theres no boot logo you probably need to DD the aboot in
Click to expand...
Click to collapse
This.. If you have bulk mode, you can fix it!
kewkie said:
It is.. i just did by flashing a broken rom.. sent it to the repair center and they replaced the motherboard
Click to expand...
Click to collapse
That's actually just killing a fly with a sledgehammer. 99.9999% sure you got a softbrick.
Sent from my Moto G using XDA Premium 4 mobile app
Savoca said:
That's actually just killing a fly with a sledgehammer. 99.9999% sure you got a softbrick.
Sent from my Moto G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Tried 3 different laptops
1x windows 8.1 (with ubuntu)
1x window 7 x64
1x windows 7 x86
Reinstalled all drivers, tried everything, but i couldnt get any usb connection.
- Factory reset? Freeze
- Normal boot? Stuck at bootlogo
- Download mode? Stucking at the loading screen
E-I-K-E said:
Alright, I gathered some more information from the seller.
He tried updating TWRP, but he followed wrong instructions from some website.
He can´t enter Recovery or Download Mode on the Phone.
The Display is active, but only Backlight.
Click to expand...
Click to collapse
I had that problem when updating TWRP too. You have to be careful because these recoveries are only made for specific firmware versions. I cant remember how I fixed the issue after only being able to get a backlight on and no image, but I did fix it and my phone works fine. I do think you will need the TWRP files already on the phone to fix though, so you can somehow manage to flash back. They will need to be on the phone since you can push anything via ADB
E-I-K-E said:
Right, I asked him if the Device shows as qhsusb_bulk in device Manager, and it does.
The only thing that worries me, is that there is no Boot Logo, most of the people in the Linux Fix Thread atleast get a LG Logo and not just Backlight.
I´m really unsure what to do, I can save like 150€ by buying the broken G2, but well . . . I dont know if I can fix it.
Another problem is, that I have not a single clue on how to operate Linux/Ubuntu, and the only real fix requires either of those
Click to expand...
Click to collapse
i've been in this bricked situation when i was trying the 4.4.2 update manually...completely bricked, could not get into download mode too...so gave it to the service centre which at first said the main board will have to be changed when recovering through software upgrade failed...next day i got the phone back as they managed to flash the software back on it...
does not end here...i tried to flash optimus g pro 2 rom through twrp and same thing happened again...but was lucky this time as i could enter download mode and flashed kdz to recover...
E-I-K-E said:
I'm just wondering if you can completely Hard Brick a LG G2 to a point, where there is no revive possible.
I can purchase a cheap LG G2 international version, but the seller says that he broke it during flashing a Kernel.
Can you for example revive a phone,that had a Kernel from completely different phone flashed?
Any insight would be greatly appreciated.
Sent from my C6503 using Tapatalk 2
Click to expand...
Click to collapse
And yes i truly believe that our device can be hard bricked like i did mine today.
I tried to compile a custom bootloader for G2 using Qualcom's sources and fraction of LK. But in doing so i left my phone in a quasi-state where it will not connect as a usb device coz it does not pass the bootloader (Although bootloader is working as it should). .
So the only two option remain here for me is
1. To send phone back to LG service center where they'll do idk what.
2. To use JTAG or short the ic (Wonder if it could be done ) i.e manually open the phone and boot into the primary bootloader(Qcom legacy BL).
See that's how you can hard brick ur phone the right way
fizzy177 said:
And yes i truly believe that our device can be hard bricked like i did mine today.
I tried to compile a custom bootloader for G2 using Qualcom's sources and fraction of LK. But in doing so i left my phone in a quasi-state where it will not connect as a usb device coz it does not pass the bootloader (Although bootloader is working as it should). .
So the only two option remain here for me is
1. To send phone back to LG service center where they'll do idk what.
2. To use JTAG or short the ic (Wonder if it could be done ) i.e manually open the phone and boot into the primary bootloader(Qcom legacy BL).
See that's how you can hard brick ur phone the right way
Click to expand...
Click to collapse
Your LK build wouldn't have matched the sbl1, anything other than LG's signed aboot wouldn't work.. /:
Sent from my Nexus 5 using XDA Premium 4 mobile app
Savoca said:
Your LK build wouldn't have matched the sbl1, anything other than LG's signed aboot wouldn't work.. /:
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
But it did work coz our bootloader enfoces the signature check not in the sbl.(Our Primary boot loader)
i'm sure of it because it tries to go to download option but freezes at initial stage.
had it been the case my device would've been detected as qucom_bulk device or so..
---------- Post added at 09:03 AM ---------- Previous post was at 08:58 AM ----------
kewkie said:
Tried 3 different laptops
1x windows 8.1 (with ubuntu)
1x window 7 x64
1x windows 7 x86
Reinstalled all drivers, tried everything, but i couldnt get any usb connection.
- Factory reset? Freeze
- Normal boot? Stuck at bootlogo
- Download mode? Stucking at the loading screen
Click to expand...
Click to collapse
You my dear friend are a victim of a curroupt bootloader seqence(NOT THE CoRRUPT BOOTLOADER) i.e
Your phone would start something like
1- EFI initialization ok
2-Primary Boot Load -ok
3-Vendor Boot Load -ok
4- Error unable to find proper boot sequence- system halted
So ur best options are the one that i've stated just above this thread.
My case. I root and flash custom recovery then apply OTA = medium brick. Download mode was not functioning, only recovery. To make matter worse, I flashed KK stock rom through ADB in recovery = super brick. Then I went to LG service center with poker face asked for reparation. They asked (confirm) whether your phone is rooted or not (they had already know though) and I just said like It is my sister's phone. Then they they open the phone and maybe directly format the sd card with some stuff. My phone is restored again afterward. In my opinion, software modification can always be repaired unless you fry your phone through overclock or overvolt.
ramabg said:
My case. I root and flash custom recovery then apply OTA = medium brick. Download mode was not functioning, only recovery. To make matter worse, I flashed KK stock rom through ADB in recovery = super brick. Then I went to LG service center with poker face asked for reparation. They asked (confirm) whether your phone is rooted or not (they had already know though) and I just said like It is my sister's phone. Then they they open the phone and maybe directly format the sd card with some stuff. My phone is restored again afterward. In my opinion, software modification can always be repaired unless you fry your phone through overclock or overvolt.
Click to expand...
Click to collapse
It's not a brick if it was restored... meh.

Bricked for good?

Hi all, I was in the process of trying to put Android 5.0 on my Verizon G3. I was following this thread:http://forum.xda-developers.com/verizon-lg-g3/general/howto-update-to-stock-lollipop-23a-t3044398. I downgraded to 10b, upgraded to 12b and then the last step, which is when things went wrong is I was upgrading to 23b (5.0) via the Action Launcher method and when the device when to boot back up to install the update it failed.
Im now stuck to where I can not power up the device, I get the LG screen and it says "Secure Boot Error/Certificate Error".. something along those lines. I lost the ability to get into download mode, it tries and then shows the boot error screen before going black.. the notification lights also flash amber and blue. The only thing I can get into is Recovery mode by Volume down + power but I tried every option.. safe mode, wipe cache, factory reset, usb debug mode all give me the boot error screen before going black.
Any suggestions before I trash the device?
I don't know how to get out of that situation, but if you post in the Verizon G3 Q&A section, someone might have some ideas.
Otherwise, I'd go to a Verizon store, tell them that you received am OTA update and left your phone like that.
roirraW "edor" ehT said:
I don't know how to get out of that situation, but if you post in the Verizon G3 Q&A section, someone might have some ideas.
Otherwise, I'd go to a Verizon store, tell them that you received am OTA update and left your phone like that.
Click to expand...
Click to collapse
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Cyber Warrior said:
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Click to expand...
Click to collapse
Blame Tapatalk. Sorry about that, LOL.
I understand. Don't blame me if I'm wrong, but I doubt if they'll be able to tell. First thing they'll do is put it back to Stock with some advanced tool of their, and I'm sure it'll wipe internal storage where the file was.
roirraW "edor" ehT said:
Blame Tapatalk. Sorry about that, LOL.
I understand. Don't blame me if I'm wrong, but I doubt if they'll be able to tell. First thing they'll do is put it back to Stock with some advanced tool of their, and I'm sure it'll wipe internal storage where the file was.
Click to expand...
Click to collapse
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Cyber Warrior said:
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Click to expand...
Click to collapse
Maybe when all this rooted stock LG Lollipop news and ROM-making dies down some, bump this thread if noone more knowledgeable comes along and shares some info in the meantime.
Sorry man. Good luck!
Cyber Warrior said:
lol. yeah I hope so, at this point I really would like to just fix it though so I dont get stuck paying insurance.
Click to expand...
Click to collapse
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
That should work , I bricked my g2 and was able to fix it using
Fastboot commands, I'm thinking you can use adb commands
And fix your phone. You basically have to push .img files to
The phone through adb. Good luck
Edit, I could always swap mother boards for under two hundred
And just don't even go through your insurance. Check eBay and
Amazon they sell them.
hawkswind1 said:
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Yeah I was looking at that last night.. I wouldn't have to be rooted though? I'll see if I can find the files I need. I've never run Linux before but its worth a shot. I was kind of discouraged when I read about a similar G3 user who tried the process with no luck.
Alright I found these.. http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
Would those do? And what mode would I put the device in? The computer does not recognize the phone..download mode won't work and recovery mode options won't work either. I'm familiar with adb and fastboot but if someone could post the commands I need it would be helpful..in the meantime I'm going to try and see if I can find them myself. Thanks
Cyber Warrior said:
Alright I found these.. http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
Would those do? And what mode would I put the device in? The computer does not recognize the phone..download mode won't work and recovery mode options won't work either. I'm familiar with adb and fastboot but if someone could post the commands I need it would be helpful..in the meantime I'm going to try and see if I can find them myself. Thanks
Click to expand...
Click to collapse
Does your phone even show as qhsusb_bulk or similar in device manager while in Linux? Make sure you use the img's from the firmware you were installing when you had the problem. I assume 23B. The commands are in the link I posted above but keep in mind they are for the G2. It's likely to DD commands, ie. partition locations are different on the G3, I don't know the correct ones. Maybe some research can dig them up. Doesn't look too bad assuming you can get linux to recognize the phone in some form, which it should and that you're able to verify the location of the partitions for G3. Wish I could be more help. It was a long time ago when I went through this on the G2
Cyber Warrior said:
This is the VZW G3 Q&A no?
I called tech, said I received an update and wasn't sure what happened but the phone wont start now, its going through insurance with the $100 deductible but my concern now is, the tech said if they find it was modded in any way I would be charged $300. The phones not rooted or anything, just a bad file I tried to apply I guess through Action Launcher. But with the notification lights flashing different colors and a boot error message I feel busted lol.
If I can somehow fix the phone I would like to try. I've been in bad situations with other devices and have always found a way out, but this being my first LG device I'm feeling lost and worried its too late.
Click to expand...
Click to collapse
I've never had to do insurance for a bad update.
I have TEC and in those cases where there is absolutely no damage, I get a replacement for free.
YMMV but I wouldn't pay $100.
hawkswind1 said:
This is for the g2 but I believe it will work. You'll need to run linux or a linux live cd and find the correct files for vs985. Theyre on autoprimes site. If you cant find them reply to this and ill track down the url.
http://forum.xda-developers.com/showthread.php?t=2582142
Click to expand...
Click to collapse
Hi I have Linux up and running.. can you help me with what files I need please?
Cyber Warrior said:
Hi I have Linux up and running.. can you help me with what files I need please?
Click to expand...
Click to collapse
It's a bit confusing the way it's written in the guide. I believe you use the 23b files in your case. Reread it to be sure.
The files are here- http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
More files here if needed http://downloads.codefi.re/autoprime/LG/LG_G3
I'm not even sure my phone is being recognized..at least nothing pops up. I'm not familiar with terminal commands in linux. At this point I'm lost.. I messaged auto prime to see if he could help out. I'm not even sure where to begin converting that g2 guide for use with the g3.
For the hek of it I'm putting the android SDK on Linux just to see if I can get fastboot to recognize the phone.
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 you can try this from Windows if your phone is showing up as Qualcomm in device manager.
dwheimerl said:
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853 you can try this from Windows if your phone is showing up as Qualcomm in device manager.
Click to expand...
Click to collapse
IS there a driver to get my phone to be recognized as Qualcomm?? I think i found a way to fix mine but i need the driver
danetbra63 said:
IS there a driver to get my phone to be recognized as Qualcomm?? I think i found a way to fix mine but i need the driver
Click to expand...
Click to collapse
Qualcomm driver is on this page.. 252-253 http://forum.xda-developers.com/showthread.php?t=2582142&page=252
Good luck, I was able to get the phone recognized as qhsusb_bulk, then as qualcomm 9008 but eventually gave up after spending over 2 days researching and trying different methods before i threw in the towel.. I even had help via remote access to my computer with no luck. Check the thread I linked there were a few guys willing to help out.
My replacement G3 actually arrived today.. still cant believe I hard bricked a device.
Cyber Warrior said:
Qualcomm driver is on this page.. 252-253 http://forum.xda-developers.com/showthread.php?t=2582142&page=252
Good luck, I was able to get the phone recognized as qhsusb_bulk, then as qualcomm 9008 but eventually gave up after spending over 2 days researching and trying different methods before i threw in the towel.. I even had help via remote access to my computer with no luck. Check the thread I linked there were a few guys willing to help out.
My replacement G3 actually arrived today.. still cant believe I hard bricked a device.
Click to expand...
Click to collapse
What's the next step after the 9008? i made it that far but idk what to do next.
danetbra63 said:
What's the next step after the 9008? i made it that far but idk what to do next.
Click to expand...
Click to collapse
I'm assuming using the tool to push the img files but I didn't get that far.

Categories

Resources