Hi there is it possible that that someone could mess up a samsung galaxy s2 by flashing an incorrect rom to it?
I bought one second had and the phone chrges fine but always says device not recognised when plugged in via usb.
Thanks rob
Yes, of course. If you flash wrong, your phone can brick. Try to flash an original rom without mods, using Odin, and see how your phone behaves. If it's ok, with the USB connection working, then you flash a custom rom and can really expect it to be fully functional.
Related
Hello,
Well I have a slight problem with my SII.
What happened is that my USB port on the bottom of my phone got slightly damaged. My phone will charge just fine via the port but it will not connect to the computer. Windows just says that it can't see the device (Yes, I have reinstalled the drivers, other SIIs work just fine, and my Note is fine too - I have also used a selection of cables) The phone also can't see the computer, all that is does is charge.
I am currently running a custom ROM which I will need to remove for when Samsung take my device away. Luckily I have CWM installed on my phone so I can flash it on the fly via that.
My question is, where can I get stock ROM which I can flash in CWM and get an insecure kernel in which I can just my home made JIG to get rid of the boot count...
Or is this impossible without using odins; in which case I guess I am screwed!
Mobile Odin
You can use Mobile Odin to flash stock firmware.
...
Thank you both - I am using Mobile odins. Thanks!!
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying:
Hi,
S2 suddenly stopped picking up USB. "USB Device Not Recognised".
I've checked all guides and i cant get it to work. Its not my USB ports my S4 works fine.
I have replaced USB pcb many months ago no problem until now, it charges fine makes standard noise when i plug it in.
I assumed it may be due to custom rom, i tried to flash stock in Odin download mode but it does not recognise any USB device.
I'm kind of stuck and don't know what to do next hope someone can help.
Update: I'm going to try Mobile Odin, see if flashing original Stock firmware fixes it.
You can try to reinstall samsung drivers (http://forum.xda-developers.com/showthread.php?t=961956), see if that fixes it.
It's unlikely that a custom rom is causing it, unless the problem happened as soon as you flashed it, rather than suddenly not working.
Thanks, tired it no luck, I may have to replace USB PCB. flashed stock firmware with mobileOdin I hoped it would fix it.
:good:
Thanks for that outstanding contribution to the thread
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh:
I have a samsung galaxy s3 with stock firmware. I've hade a few custom roms before but put it back to stock for some reasons. But now odin does't recognize my phone. Drivers are up to date, the usb cable is the same, other phones are detected (s2 and s5). i have tried other cables including from other s3's from the box. I tried to root it from sd but still no luck, so i can't put custom rom from sd. Is there any way to put a rom from sd without rooting? it can be stock, it doesn't matter(i'm stuck with stock recovery). Also I consider myself a noob, so any explanation would be appreciated. Thank you
No, there isn't. Try another pc or resolve the usb conflict on the pc.
boomboomer said:
No, there isn't. Try another pc or resolve the usb conflict on the pc.
Click to expand...
Click to collapse
The same thing on other PC's.
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
boomboomer said:
I can only suggest following the guide on how to flash with Odin very carefully, then try searching for similar posts that got resolved.
However, most I've read were due to drivers or leads -if your phone connects normally in MPT mode but not in download mode then it's unlikely to be the s3 is faulty.
Click to expand...
Click to collapse
It charges only...doesn`t connect in any way. Seems like i have to visit a service?
Same here!
Having exactly the same issue here! When connected by usb cable to the computer, theres no USB connection on the status bar. Just the ray symbol on battery to demonstrate the USB is connected.
I need to change my ROM, but even Odin didn´t recognise my phone.
Some clue?
Thanks!
Ps: sorry for my poor English....
Same Problem
I have the same problema, after the installation of the custom Rom, in about 1 week, the PC no regcognize my Galaxy S3. I have test it in another computer with another usb cable. I need help, i need to put a stock rom without odin, i have clockwormod installed.