Related
Hello everyone,
I am a new user of galaxy s2 i777. I have been trying to connect the phone in usb mass storage mode.
I have gone through a lot of threads in this forum, none of them give a clear idea as to what to do.
some say install kies some say something else... I have tried many things. all of them dont seem to work.
Can anyone please guide me in a clear cut was as to what to do?
Thanks guys.
Out of the box, by the default, when plugging, usb icon will and should be displayed on the notification; pull the notification down then tap to connect the usb mass storage mode. Your PC should recognize it now.
Note: try more than one usb port.
Go to settings->wireless and network->usb utilities follow instructions
I ran into that problem after using one my sisters chargers when i was visiting my parents house. Apparently the usb cable bent the connector in my phones port. I ended up bending it back and it has worked like a charm since then
Or enable USB DEBUGGING option. If you do that as soon as you plug into any computer, the option to transfer files will automatically show in your notification/status bar.
How to enable USB Debugging:
Settings-Applications-Development-check USB debugging
barbo said:
How to enable USB Debugging:
Settings-Applications-Development-check USB debugging
Click to expand...
Click to collapse
To clarify:
The Galaxy S II defaults to MTP mode (media mode, similar to iPhone).
Unlike said iPhone however, we can change ours back to the UMS (USB Mass Storage) mode by enabling USB debugging.
I never found it documented anywhere, I just ran into by accident when enabling USB debugging for TB and MTP stopped working.
It took me a while to figure out why.
I actually like MTP mode (it's faster and easier to use, except in linux as I understand).
The "USB Utilities" option seems to be a per-use setting (not 100% sure, never used it). However USB debugging is a "set and forget" option.
Use steps I quoted above to enable it.
After that when you plug it in, you can select to mount it to the PC via the notification bar.
Hope that helps.
EDIT: It looks like this option was posted by at least one other person on here before: http://forum.xda-developers.com/showpost.php?p=20204599&postcount=12
Tried everything
Guys,
I have enabled USB debugging mode as you have recommended and and it still does not work. I am always getting the notification on windows as "USB device not recognized".
I have tried everything. i have installed the USB driver for I777 from the samsung website. That did not work.
Another strange thing. I tried "Wireless and Network>USB utilities>Connect storage to PC" on my FRIENDS computers(Windows 7), it works.! My phone connects in mass storage mode and I am able to transfer files as usual. I did not install any software on my friends computers.
But when i do the same thing on my WINDOWS 7 PC, it does not work. I use a Lenovo T420i with factory software installed.
I am a noob in the drivers department. Can anyone please tell me what to do.
Thank you.
Help appreciated.
you say "new user" which implies stock rom. if what they are asking you to do is not working, then i believe you might need to exchange the phone. if you have an ICS rom on it, then i think that you might be stuck with MTP until you switch back to Gingerbread. i might be wrong.
Is Anti-virus disabled on your computer? Seems I've heard that it should be, but can't find where... Also, there may be different drivers for a 64-bit machine (W7?) vs. 32-bit.
Have u tried a different USB port or cable on your PC?
Sent from my GT-I9100 using XDA App
niteshreddy said:
Guys,
I have enabled USB debugging mode as you have recommended and and it still does not work. I am always getting the notification on windows as "USB device not recognized".
I have tried everything. i have installed the USB driver for I777 from the samsung website. That did not work.
Another strange thing. I tried "Wireless and Network>USB utilities>Connect storage to PC" on my FRIENDS computers(Windows 7), it works.! My phone connects in mass storage mode and I am able to transfer files as usual. I did not install any software on my friends computers.
But when i do the same thing on my WINDOWS 7 PC, it does not work. I use a Lenovo T420i with factory software installed.
I am a noob in the drivers department. Can anyone please tell me what to do.
Thank you.
Help appreciated.
Click to expand...
Click to collapse
Firstly, it's how amazing you are. You asked a question and only returns to it TWO months after? Obviously, it doesn't bother you that much.
Secondly, however, we're here to help.
About your friend computer, a. maybe he did install the Samsung USB driver already or b. maybe, at that time, you are using MTP mode.
Anyway, forget about his computer, let's get it work on yours.
I personally think the USB driver that you've downloaded from their website WOULD NOT work. I don't know why but I can tell you that it did not work for me. Give me some times to dig into my files or search again on this site for the CORRECT driver. You can also help me and yourself by continue to search for this on this xda site since I got it from here too.
Thirdly, along side with the 2nd above, do try different usb cables, do try on different usb ports
I can enable the USB mode on my note, but when browsing the phone with my computer (Mac & PC) I can not see the contents of the SD card?
EDIT: nevermind, rebooted phone and is working now.
Resolved
votinh said:
Firstly, it's how amazing you are. You asked a question and only returns to it TWO months after? Obviously, it doesn't bother you that much.
Secondly, however, we're here to help.
About your friend computer, a. maybe he did install the Samsung USB driver already or b. maybe, at that time, you are using MTP mode.
Anyway, forget about his computer, let's get it work on yours.
I personally think the USB driver that you've downloaded from their website WOULD NOT work. I don't know why but I can tell you that it did not work for me. Give me some times to dig into my files or search again on this site for the CORRECT driver. You can also help me and yourself by continue to search for this on this xda site since I got it from here too.
Thirdly, along side with the 2nd above, do try different usb cables, do try on different usb ports
Click to expand...
Click to collapse
First of all I appreciate the help you are giving me.
I am sorry if I offended you by not returning for quite a long time to post.
I have now resolved the problem and would like to share for everyone's benefit over here.
The problem was not with the software, it was with the hardware. I followed all the suggestions given over here and was in the end convinced that there should be a problem with my motherboard. This is surprising because my Flash Drive and USB mouse all work with my laptop without any glitches. But my phone(i777) and any other android phone would not connect to the computer. It would say device not recognized.
My nook e-reader which used to work perfectly started acting strange, it would be detected but i would not be able to transfer files onto the nook. So now I ws convinced that this was a hardware problem.
So I called up lenovo and showed them this problem via some software where i could share my screen with them. They asked me if a USB flash drive was working and I said yes. They reply saying that everything is perfect with your laptop and cut the call. I was offended , these lenovo support guys would not understand that it was a complex problem.
So I went to a local MicroCentre which had support for lenovo servicing and showed this problem to a technician. He was convinced that there was some problem and got my motherboard replaced . And voila there connects my android to my computer in USB mode..!
I would like to thank everyone for their help and taking time out to post here.
My laptop: Lenovo T420i with i3. looks like this was a case with my laptop only. a person i know has a t420(i5) in which my phone connected without any glitches.
Thank you for your help everyone. Hope to be helpful in return in the near future.
Hey all,
My roommate recently bought a Galaxy Tablet 10.1 and it just now wont connect to the computer.
When the device is plugged into the computer (we tried both a mac and a pc with updated kies mini installed on both) and the tablet says USB is connected, but it doesn't show up on the pc.
Any ideas?
We had it connected earlier in the day, and know it won't work. I'm puzzled.
I've got an infuse, but i've never had anything like this happen before.
Try going into settings> applications> development and tick or un-tick usb debugging. Might have to try both settings plugging and unplugging from the computer to finally get it to come up. Give it a couple minutes between each to be sure its going to see it or not.
This has worked for me in the past when something changes and I don't know what. Also re-installing the drivers on the computer has helped before for some reason. I'm using Windows7 so YMMV.
Let us know what helps.
Sent from my GT-P7510 using one stinky finger.
Are you stating it's not showing up as a storage drive in Windows when using USB, or are you stating KIES cannot see the tablet (or both)? If Kies, welcome to the club - you are far from alone. I know of no known solution (that topic has been beaten to death on all forums). Togling the USB dedub option may help with respect to Windows seeing it as a storage drive (try another USB port, too), but with respect to Kies, if you find a solution (that you can duplicate) please share. The only way I've ever been able to get Kies to work twice on the same computer was to reset the tablet back to factory defaults - at which point, I can connect VIA Kies one more time, then back to square one.
Good luck!
Canadian 10.1 4G (GT-7500D)
Kies see's the device, but wont connect. Windows doesn't see if as a USB device.
We tried toggling the USB Debugging switch to no avail.
On my infuse when i plug it into my laptop i have to go to the notification window, click on the usb connected notification, and then select mass storage mode.
We get the notification on the tab, but when i click on it nothing happens...
shooter5635 said:
Kies see's the device, but wont connect. Windows doesn't see if as a USB device.
We tried toggling the USB Debugging switch to no avail.
On my infuse when i plug it into my laptop i have to go to the notification window, click on the usb connected notification, and then select mass storage mode.
We get the notification on the tab, but when i click on it nothing happens...
Click to expand...
Click to collapse
nothing is supposed to happen. it uses MTP not mass storage. On your laptop, go to "Computer"...it should be there under a portable media device.
if that doesn't work....make sure USB debugging is UNCHECKED...it will NOT work with it checked.
If all that doesn't work..try another USB port
I believe the issue is on a windows machine it usually pops up a box where you can select what you want to do. Such as open folder to view files, etc... and this isn't happening. Probably wrong in my thinking but who knows.
Sent from my GT-P7510 using one stinky finger.
Benzoman said:
I believe the issue is on a windows machine it usually pops up a box where you can select what you want to do. Such as open folder to view files, etc... and this isn't happening. Probably wrong in my thinking but who knows.
Sent from my GT-P7510 using one stinky finger.
Click to expand...
Click to collapse
i just said that nothing should happen....its not mass storage..its MTP...you actually have to go into Computer, then select it.
Yes we're on the same page... but are we helping? well you probably did.
Sent from my GT-P7510 using one stinky finger.
Ezcats Re: Nothing should happen.
This is not entirely accurate. My experience parallels Benzoman's statement. Each and everytime I connect my 10.1 4G (GT-7500D), Windows does indeed open a box asking what I'd like to do with it. It does show up under Computer as a device, and I can readily access it to copy files (however, Kies won't connect... Kies recognized that fact that I plugged it in, and attempts to connect, but never does - again, unless I reset it to factory in which case Kies not only finds it, but will connect to it - once).
ThomasClancy said:
Ezcats Re: Nothing should happen.
This is not entirely accurate. My experience parallels Benzoman's statement. Each and everytime I connect my 10.1 4G (GT-7500D), Windows does indeed open a box asking what I'd like to do with it. It does show up under Computer as a device, and I can readily access it to copy files (however, Kies won't connect... Kies recognized that fact that I plugged it in, and attempts to connect, but never does - again, unless I reset it to factory in which case Kies not only finds it, but will connect to it - once).
Click to expand...
Click to collapse
Nothing happens on my PC...win 8... maybe that's why
ezcats said:
Nothing happens on my PC...win 8... maybe that's why
Click to expand...
Click to collapse
Windows 8 is exactly why. I've used it and you're right.
Sent from my GT-P7510 using one stinky finger.
So yeah, I give up trying in hope to get some decent help here.
I am not able to connect my SGS3 to any of my 2 PC's or my notebook.
I have tried everything as far as I know (on all 3 systems):
(Re)installed KIES
(Re)connected my SGS3
Rebooted the computers
Rebooted the phone
Did a factory reset
Used the SGS3 toolkit
Tried different USB slot
I even bought a new USB cable just to be sure :s
When I plug it in it starts charging and that's it.
Windows doesn't even give the confirmation sound when any random USB device is connected.
I don't see my SGS3 anywhere on my computer (not in device manager, nowhere).
I reinstalled KIES several times and installed the drivers through the SGS3 toolkit.
I own the international SGS3 with stock rom (haven't been able to update at all because of the connection issue).
I do not know what to do anymore.
Please help oh wise XDA gurus !
I would try a return to supplier and get them to prove its not hardware
Sent from my GT-I9300 using xda premium
Had the very same problem.. installed updated usb drivers from the samsung site and it pretty much worked for me..
Sent from my GT-I9300 using xda app-developers app
Probably a broken registry on your computer try fixing it using advanced system care (it's free) afterwards try reconnecting it again. If that doesn't work try to go to samsung's support section and see what you can find to resolve your issue.
I tried it on my PC at work, same problem.
Registry issue on 4 different machines?
I think not.
Also:
I got connectivity for a moment on both my PC and notebook but it went away within seconds.
The phone gave the notification that it is connected as a mass storage device.
Then the message disappeared and it only charged and nothing else.
Playing with the cable it came back and off a few times.
Now it stays disconnected.
Seems like the connector in my phone is dead :s?
Open Terminal Emulator
type SU
then type this.....
setprop persist.sys.usb.config mass_storage adb
bigsc said:
Open Terminal Emulator
type SU
then type this.....
setprop persist.sys.usb.config mass_storage adb
Click to expand...
Click to collapse
what does this do
darkfreak said:
I tried it on my PC at work, same problem.
Registry issue on 4 different machines?
I think not.
Also:
I got connectivity for a moment on both my PC and notebook but it went away within seconds.
The phone gave the notification that it is connected as a mass storage device.
Then the message disappeared and it only charged and nothing else.
Playing with the cable it came back and off a few times.
Now it stays disconnected.
Seems like the connector in my phone is dead :s?
Click to expand...
Click to collapse
Check the connector on your S3. The PC's maybe fine, but something is shorting pin 2 & 3 thereby nullifying the data pins.Hence it is being detected as a charger.(Actually that is the difference between a charger connection and a PC connection).Thereis a thread on XDA about cleaning it with a toothpick. Takes a few minutes actually.
you may consider on cleaning your phone's usb port
in addition, there is an app in the market (for free) that enables/disables usb mass storage (that's how i used to fix my usb problems; i honestly dunno why)
also, if u have tried different roms (stock/kernel), it may be a hw problem.
Sent from my GT-I9300 using xda premium
I thought I had connector problems myself sometime ago, but as Dr Danish said, I un installed the samsung drivers which are different from un installing kies. Restart pc and connect phone, make sure you have Internet, and windows will auto install them again.
Sent from my GT-I9300 using Tapatalk 2
if this is happening on multiple machines then its more likely to be the phone, did it happen after a flash phone reboot?. It happened to me on my old galaxy S2 after flashing a corrupt MIUI ROM.
Flash back to FULL stock should resolve, if not then your phone is in a state you can return it in, if you haven't had it long they may do a straight swapout.
It is the only thing that worked for me. It tells the phone to inquire about mtp/mass storage everytime it is connected
Sent from my SPH-L710 using xda app-developers app
bigsc said:
It is the only thing that worked for me. It tells the phone to inquire about mtp/mass storage everytime it is connected
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Does that mean you solved this with a flash back to Stock as I advised?, although sgs3 doesn't use mass storage, if you are on stock you wouldn't get these messages unless you had rooted and installed EASUMS. When you plug it in it should just say on your phone "connected as media device" and it will connect to your PC using MTP. All you need for MTP to work is the correct drivers, Kies install will provide these if you havent found them elsewhere.
Where are you at now then?
Hi,
Need help. I used to be able to transfer file via my windows or mac, plug in the usb cable, got the usb debug notification shows up on my phone, pull down the notification, I can choose MTP or Mass Storage.
Then one day, it just decided not to work anymore, I can no longer see those usb debug option. Everytime I plug in my USB cable. I have also tried different sort of usb cable even the original motorola usb cable, but nothing works.
Weird thing is when I plug the phone, nothing happened, then I unplug and plug it back, it will start charging, but still no usb debug options. I also cannot hear any sounds in windows when I plug in the usb.
Please, any idea, tips or does anyone ever experienced this before and know what's the solution?
Thanks much!
nimue said:
Hi,
Need help. I used to be able to transfer file via my windows or mac, plug in the usb cable, got the usb debug notification shows up on my phone, pull down the notification, I can choose MTP or Mass Storage.
Then one day, it just decided not to work anymore, I can no longer see those usb debug option. Everytime I plug in my USB cable. I have also tried different sort of usb cable even the original motorola usb cable, but nothing works.
Weird thing is when I plug the phone, nothing happened, then I unplug and plug it back, it will start charging, but still no usb debug options. I also cannot hear any sounds in windows when I plug in the usb.
Please, any idea, tips or does anyone ever experienced this before and know what's the solution?
Thanks much!
Click to expand...
Click to collapse
did you try different roms? suppose that you have moto drivers installed. or try another pc
I was using stock, and I even did a factory reset just to make sure, but it is still not working
Sent from my Nexus 7 using xda app-developers app
and yes, i have tried different roms and different pc. Funny thing is when I tried on one of the pc that runs windows 8, i can see the usb debug notification, but nothing shows up on the pc
Sent from my Nexus 7 using xda app-developers app
nimue said:
and yes, i have tried different roms and different pc. Funny thing is when I tried on one of the pc that runs windows 8, i can see the usb debug notification, but nothing shows up on the pc
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
install latest motorola drivers, even you can try to install motocast. Try to plugg in your usb in usb 2.0 instead if you are pluginn in usb3.0
rachit2588 said:
install latest motorola drivers, even you can try to install motocast. Try to plugg in your usb in usb 2.0 instead if you are pluginn in usb3.0
Click to expand...
Click to collapse
I think I got the latest motorola drivers from here https://motorola-global-portal.cust...can-i-download-the-usb-drivers-for-my-device?
Tried usb2.0 still nothing. I remember last time when I plug in my razr, motocast wil automatically pop up, but this time, nothing
Update, it seems to get detected when I plug it in on PC that is running XP. This is getting weirder...
The Stock ICS Final i'm running works flawlessly with the usb connection, but various custom ROM's i've tried can't mount either Internal SD or External SD. Turning off USB debugging mounts the internal memory on some ROM's, but only with read rights.
There are quite a few people with this problem, and despite searching everywhere i haven't found an proper answer as to why this happens.
agree.. i saw a lot of people having the same issue but most solved it by using moto original cable but doesn't work for me sadly.
is there a log in the system itself? something like a logcat that i can take a look?
Sent from my Nexus 7 using xda app-developers app
weird thing happened again, but this time it's a good thing. Out of nowhere, now it decided to work again even when I'm not using the original cable. this is just getting weirder and weirder. Anyway thanks everyone for the help
Mine dose the same sometimes it works and other times it don't.
Sent from my Nexus 7 using xda app-developers app
Did you try other Micro-USB cables? Maybe yours is screwed.
I posted the pics of the screen shots of my About phone section so u guys can see what my phone is running...
Anyways, anytime I used to plug my phone into my laptop, it would always give a pop up on my phone with that little USB symbol and I was given the option to do it as media, camera or installer...
I plugged it in today and nothing... my computer doesn't even recognize it at all.
I redownloaded kies... the drivers... I even tried different cords...
And nothing..
It's not my USB plug on my laptop cuz everything else works in that plug....
This happened ever since I updated to lollipop...
I tried unchecking the USB bebugging.... and tried it checked... still nothing...
Any ideas of what could be the issue???
Sent from my SCH-I545 using XDA Free mobile app