My XT910S bootloop after editing framework-res
I don't change permission
i have backup a framework-res but i can't using adb push in to framework folder
Please help me (XT910S haven not stock rom)
i have fastboot working
You are probably going to need RSDlite and the fast boot files for you area
Sent from my Droid RAZR
nickhammond121 said:
You are probably going to need RSDlite and the fast boot files for you area
Sent from my Droid RAZR
Click to expand...
Click to collapse
Thank you reply
XT910S is not available rom .sbf , i don't flash via RSDlite
I just did this myself...yesterday in fact... So here is simply what u do...just get hold of a backup of ur nandroid. put it in the clockworkmod recovery folder on the SD card and reboot into recovery...
flash the restore and ur good...
circleofomega said:
I just did this myself...yesterday in fact... So here is simply what u do...just get hold of a backup of ur nandroid. put it in the clockworkmod recovery folder on the SD card and reboot into recovery...
flash the restore and ur good...
Click to expand...
Click to collapse
i have not cwm, Plz help me
You don't need cwm it works with stock recovery to I think
Sent from my MZ601 using XDA Premium HD app
@halybobo
Do you know what you original system version is (mine is: xxx.xxx.x.XT910.retail.en.EU)?
OK...u might have to format the system with factory reset ..are u OK doing that??
YOU WILL LOSE UR DATA...not the mem card data...just the apps u installed and all...
So to get into stock recovery:
press vol up + down + power button
U shud see a menu with white text...here u can look for the option of factory reset...not sure Where it is..but if u look around u will see it...
Sent from my Moto RaZr.
circleofomega said:
OK...u might have to format the system with factory reset ..are u OK doing that??
YOU WILL LOSE UR DATA...not the mem card data...just the apps u installed and all...
So to get into stock recovery:
press vol up + down + power button
U shud see a menu with white text...here u can look for the option of factory reset...not sure Where it is..but if u look around u will see it...
Sent from my Moto RaZr.
Click to expand...
Click to collapse
Do the above and the second option in the list will be will be Recovery, press vol- the highlight it then press vol+ and the phone will reboot and show a screen with an Android and a !. Press vol+ and vol- to show options. Use vol- to highlight "wipe data/factory reset and press the power button. This will do a Factory reset and wipe all data (not SD cards). Once done you should see the option to reboot system, highlight this and press the power button. if it has worked the phone should start as if you had just opened the box.
nickhammond121 said:
Do the above and the second option in the list will be will be Recovery, press vol- the highlight it then press vol+ and the phone will reboot and show a screen with an Android and a !. Press vol+ and vol- to show options. Use vol- to highlight "wipe data/factory reset and press the power button. This will do a Factory reset and wipe all data (not SD cards). Once done you should see the option to reboot system, highlight this and press the power button. if it has worked the phone should start as if you had just opened the box.
Click to expand...
Click to collapse
thank you so much!
We haven't stock firmware .sbf for XT910S any where
I think only CWM type .img flash via fastboot will give CWM on my phone then Flash stock rom via cwm but we are not CWM for Razr .img
Yeah you're basically stuck in terms of this. You should have installed cwm/bootmenu as it is designed to save you from such problems. Send it back to factory for service and they'll flash it clean and have it working.
You'll need a fastboot file which I don't think there is for the xt910s at the moment if you want to repair it manually.
Edit
Looked in this thread and there is a zip posted that could be used with fastboot and it flashes. If you're on GB, which I think this is for, you could try downloading it and flash only the system_signed.img by using moto-fastboot.exe . Since its only editing the system, it may just let you boot into it and then let you install bootmenu/cwm and restore a backup or have it there for safety from now on incase you mess up.
http://forum.xda-developers.com/showthread.php?t=1470393&page=4
still brick
evonc said:
Yeah you're basically stuck in terms of this. You should have installed cwm/bootmenu as it is designed to save you from such problems. Send it back to factory for service and they'll flash it clean and have it working.
You'll need a fastboot file which I don't think there is for the xt910s at the moment if you want to repair it manually.
Edit
Looked in this thread and there is a zip posted that could be used with fastboot and it flashes. If you're on GB, which I think this is for, you could try downloading it and flash only the system_signed.img by using moto-fastboot.exe . Since its only editing the system, it may just let you boot into it and then let you install bootmenu/cwm and restore a backup or have it there for safety from now on incase you mess up.
http://forum.xda-developers.com/showthread.php?t=1470393&page=4
Click to expand...
Click to collapse
Thank you for reply
where are you find system_signed.img
i can to flash use fastboot flash system system_signed.img ?
halybobo said:
Thank you for reply
where are you find system_signed.img
i can to flash use fastboot flash system system_signed.img ?
Click to expand...
Click to collapse
Download the zip file from that thread and extract it. System signed will be one of the files.
You can flash it via fastboot cmd line.
fastboot flash system system_signed.img
I highly doubt this will work. To fix it for sure, just send it back to the service centre and they will flash a factory image for you.
i need stock fw for XT910S flash via RDS Lite, Please help me :crying:
halybobo said:
thank you so much!
We haven't stock firmware .sbf for XT910S any where
I think only CWM type .img flash via fastboot will give CWM on my phone then Flash stock rom via cwm but we are not CWM for Razr .img
Click to expand...
Click to collapse
Yes, we have a XT910K and XT910S but I think its GB.
If you're on ICS forget about it.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=1395396&highlight=xt910k
pedrotorresfilho said:
Yes, we have a XT910K and XT910S but I think its GB.
If you're on ICS forget about it.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=1395396&highlight=xt910k
Click to expand...
Click to collapse
Thank you! but i don't installed CWM , Please Help me
Related
Dear helper,
please i accidently delete the system file " Framwork-res.apk" in system, because i want to copy the new file in to make my browser always default wid desktop browe. wHEN I DELETE this file my phone just crush and keep rebooting loop. Is there any ways to copy it back? and how to do it? Please guide me a way to do it to make my tab run normal. I would appreciate you guys quick answer cuz now i duno how to do thing wid my tab.
Thx you a lots
Alright friend, are you rooted? do you have CWM recovery? Or are you familiar with odin?
Hi Fren,
My tab rooted already and also have cwm. I never use odin at all cuz it is my first time to droid OS. But i would learn faster if you can give me a guide. I duno how to copy new rom to my device.
Did you make a nandroid backup in CWM before atempting this? Do you have any backups to flash?
wut is nadroid? u mean the using rom manager to back up or sth? i dun think i have a back up file
Just turn the tab off. Boot in recovery and do a factory-reset.
Heppieboeddah said:
Just turn the tab off. Boot in recovery and do a factory-reset.
Click to expand...
Click to collapse
umm, yea. What he said, lol.
boot in recovery is volume down+power. use volume down button to navigate to recovery and select with volume up button. Then select factory reset>yes.
u mean wipe data/ factory-reset in cwm? i did it already. and wut shud i do next?
No. just turn the tab off. Then reboot in recovery as stated in the post above
reboot to system
im on that state now. wut next?
joseph168 said:
im on that state now. wut next?
Click to expand...
Click to collapse
Navigate with the volume up or downbutton too fatory-reset and press the powerbutton and confirm with yes
give me a full guide please
I don't understand, did it reboot all the way? Aren't you back up and running again?
Ure in the recovery now?!~Then navigate with the volume up/down button to factory-reset. confirm with pressing the powerbutton
yeah it is rebooting all the i have no back up at all. how can i flash to new rom?
hi all,
Big thank for ur effort to help. Finally i got bak my tab to work. I jux flash to stock firmware by Odin. now got an experiance.... Will play more n learn more
a factory reset will not work, as all it does it wipe /data and /cache, framework-res is in /system, which is not touched by a data wipe.
the solution (which you have found on your own) is to flash a rom (even the same rom you're on) as it will rewrite the /system data which includes framework-res.
the reason flashing a theme was suggested is because themes also contain the framework-res.apk, and flashing a theme will not result in any data loss.
i hope this helps clear up some confusion and any animosity
Hi,
I just purchased an Atrix 4G from an online seller. My problem is that it has a custom rom (nottachtrix 1.2.6). I'm actually fine with that, tho the webtop is not working. All I see is the "bouncing" motorolla logo.
All I want is to be able to use the phone and use the Webtop and multimedia player. I have a docking station that comes with USB ports.
Here are some info about my phone:
System Version: 4.5.141.MB860.ATT.en.US
MODEL: MB860
ANDROID VERSION: 2.3.6
BASEBAND VERSION: N_01.87.00R
WEBTOP VERSION: OSHWT_U1_6.48.0
KERNEL VERSION: 2.6.32.56-MB860-faux123-GB-024 [email protected] #6
BUILD NUMBER: NottacTrix 1.2.6
I'm very new to this and have never tried (or see the need for me) rooting my previous android phones.
I also tried researching on how to restore to the stock rom but it seems that it can brick my phone.
Please help...
Also I already did a Factory reset but no luck in making webtop work.
Fastboot erase webtop, then flash 2.3.6 fixed webtop. You will find it in fruitcake backup thread.
Sent from my MB860 using xda premium
CaelanT said:
Fastboot erase webtop, then flash 2.3.6 fixed webtop. You will find it in fruitcake backup thread.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Thanks! So basically, I'm going to reinstall the webtop using the 2.3.6 version of webtop?
Which one of these should I download from this topic?
ATT 4.5.140 - 2.3.6
2.3.6 webtop
Sorry for asking this noob question. How do I reinstall the webtop? I'm not familiar with fastboot and flashing rom....
I'm doing my research now, but if someone can guide me would really appreciate it.
I can't seem to find a step by step guide on how to do this (from a noob perspective)..
I know this thing should not be done by noobs, but hey, everyone started as a noob..
dhome1105 said:
I can't seem to find a step by step guide on how to do this (from a noob perspective)..
I know this thing should not be done by noobs, but hey, everyone started as a noob..
Click to expand...
Click to collapse
Best for you to start with the N00B thread in General.
Sent from my MB860 using xda premium
CaelanT said:
Fastboot erase webtop, then flash 2.3.6 fixed webtop. You will find it in fruitcake backup thread.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Is this what you are referring about?
http://forum.xda-developers.com/showthread.php?t=1461168
dhome1105 said:
Is this what you are referring about?
http://forum.xda-developers.com/showthread.php?t=1461168
Click to expand...
Click to collapse
I am talking about erasing webtop as described there, but then flashing the CWM zip of 2.3.6 fixed webtop from recovery, and not flashing the .img from fastboot.
CaelanT said:
I am talking about erasing webtop as described there, but then flashing the CWM zip of 2.3.6 fixed webtop from recovery, and not flashing the .img from fastboot.
Click to expand...
Click to collapse
Okay. Can you please tell me if this is a correct way to do it. Someone said that I can just install CWM and flash the webtop and it should work.
Steps that I plan to take:
1. Download fixed 236-webtop
2. Install Quickboot from android market (found a tutorial in youtube by PCTECHCrew name "How to Flash a ROM with Clockwork Mod (CWM)")
3. Once installed, select recovery
4. Then select Install zip from SD Card
5. Select the file "fixed 236-webtop.zip"
6. Wait till it finishes
7. Select Reboot system now
Do I miss something important?
If this is correct, do I still need to erase the webtop or by using quickboot that I installed I dont have to since quickboot will take care of that?
anyone can confirm if this steps are correct?
dhome1105 said:
anyone can confirm if this steps are correct?
Click to expand...
Click to collapse
Hi there
If you have Nottachtrix on, then you should have CWR on the device already.
First, place the weptop.zip on your sd card.
Then switch off your device.
power it on, and hold the (volume down button) until fastboot appears.
Scroll down (using the volume button) until you see Android recovery press the vol up button.
Once there, it will say if you running CWR and what version.
If not, you will have to do that first.
(Dont worry, this will not harm your phone) Try it out first.... and let us know.
^^rac said:
Hi there
If you have Nottachtrix on, then you should have CWR on the device already.
First, place the weptop.zip on your sd card.
Then switch off your device.
power it on, and hold the (volume down button) until fastboot appears.
Scroll down (using the volume button) until you see Android recovery press the vol up button.
Once there, it will say if you running CWR and what version.
If not, you will have to do that first.
(Dont worry, this will not harm your phone) Try it out first.... and let us know.
Click to expand...
Click to collapse
Thanks! Its CWM-based Recovery v5.0.2.7-atrix5
dhome1105 said:
Thanks! I have tried your advice but I cant see the version of the CWR..
What I can see are a one line menu under the word Unlocked.
the menus are the following:
Fastboot
NVFlash
BP HW Bypass RSD
BP HW Bypass OC Dload
BP HW Diag & Boot AP
BP HW Bypass BP only
BP SW Bypass RSD
Android Recovery
Boot android (No BP)
Device UID
console=ttyS0,115200N8
Early USB Enumeration
BP Tools
RSD
Click to expand...
Click to collapse
Cool, go to Android recovery and press vol up. You should then be in CWR....... It should say that on the top somewhere......
Then Wipe Cache Partition, go down to "Yes" and select, once done
Choose Install zip from SD Card
Choose .zip from SD card
Go to where you have placed webtop.zip and select it
Select yes
Once done, pres back
Then to reboot.
Test your Webtop, and let us know.....
^^rac said:
Cool, go to Android recovery and press vol up. You should then be in CWR....... It should say that on the top somewhere......
Then Clear System Cache
Then Install zip from SD Card
Choose .zip from SD card
Go to where you have placed webtop.zip and select it
Select yes
Once done, pres back
Then to reboot.
Test your Webtop, and let us know.....
Click to expand...
Click to collapse
I cant see the Clear System Cache.
Here are the options:
reboot system now
apply update from sdcard
wipe cache partition
install zip from sdcard
backup and restore
mounts and storage
advanced
power off
++++go back+++
are you refering to the "wipe cache partition"?
dhome1105 said:
I cant see the Clear System Cache.
Here are the options:
reboot system now
apply update from sdcard
wipe cache partition
install zip from sdcard
backup and restore
mounts and storage
advanced
power off
++++go back+++
are you refering to the "wipe cache partition"?
Click to expand...
Click to collapse
Yep, i edited my post hehehehehe, dont worry this cant damage the phone etc....
Youll learn how to do work with CWR
I have successfully installed the webtop. Tho I can't test it yet until I get back home (excited!!!)
If im going to install webtop2SD for full ubuntu, will I use the same procedure?
dhome1105 said:
I have successfully installed the webtop. Tho I can't test it yet until I get back home (excited!!!)
If im going to install webtop2SD for full ubuntu, will I use the same procedure?
Click to expand...
Click to collapse
Cool man, hope it works, let us know!
Not sure, never played around with the webtop2SD....
Dont forget to say thanks!
Thanks so much bro! I'll play with the original webtop first then go to full ubuntu after to see the comparison. thanks thanks!
dhome1105 said:
Thanks so much bro! I'll play with the original webtop first then go to full ubuntu after to see the comparison. thanks thanks!
Click to expand...
Click to collapse
Sharp shoot, let us know if it worked!
^^rac said:
Sharp shoot, let us know if it worked!
Click to expand...
Click to collapse
It worked!!! Yehey!! hahaha!
My bluetooth keyboard and mouse also worked! Only problem now is to find micro hdmi to vga cable.. thanks so much!!!
Hello there!
This question might have appeared alot but I'll try to be as short and accurate as possible on the following:​
About two weeks ago, I decided to root my Sony Live With Walkman (4.0.4 Ice cream sandwich) and now I'm thinking of installing Cyanogenmod 9 stable release. But I'll leave this mod for the last part and let us focus on the rooting process I've done.
I've used the following tutorial: talk.sonymobileDOTcom/thread/41119?start=0&tstart=0
At first, I was unsuccesful but in the second try I had managed to root my device (Unlocked bootloader).
Being a bit tired over the official Sony ICS, I thought of putting Cyanogen to my device. This is where the things get confusing for me:
I've spotted multiple tutorials and each one is different and unclear to me. These two are the ones I'm thinking of as the most reliable sources:
- wiki.cyanogenmodDOTorg/wiki/Sony_Ericsson_Live_with_Walkman:_Full_Update_Guide
- technologic101.wordpressDOTcom/2012/03/12/tutorial-how-to-install-cyanogenmod-9-0-ics-on-your-se-xperia-2011-device/
So, I have Cyanogen9 coconut, drivers, fastboot, google apps and proper FTF file downloaded.
But what now? Which tutorial is better and accurate for my state of device? Am I risking a brick by doing this? What are the current downsides of Cyanogenmod9 for this device?
Please, write your opinions, explain or link me to the proper guides for my case. I am grateful for any kind of information you give me!
Thanks!
First and foremost have you unlocked your bootloader?
Sent from a mango
andogeek10 said:
First and foremost have you unlocked your bootloader?
Sent from a mango
Click to expand...
Click to collapse
Yup, I did.
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
xhanafix said:
Flash the cm kernel. Flash cm rom in recovery. Done.
Cm comes pre rooted.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
Is kernel the TFT file or the Cyanogenmod zip file (about 125MB)? And how do I flash this with Flashtool?
Boot.img inside the zip is the kernel. Extract and flash that file using fastboot. After flashing the kernel, start your phone and enter recovery. From recovery flash the zip files
Sent from my SK17i using xda app-developers app
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
In my signature, there's a guide how to install a custom rom/custom kernels, maybe this could help you!
I would use the cyanogenmod full update guide :good:
You don't need any ftf, you flash a custom rom with clockworkmod (cwm), but this should be explained in the guide
andogeek10 said:
Okay then you have done have of the work.
Now backup all your contacts, apps, sms's etc. Then power off your device and boot into fastboot mode. Then take the kernel from the CM9 zip and flash it. After that start your phone and just when the logo gets brighter press the volume down button with which you will boot into the CWM recovery. After that navigate to backup and restore and backup your rom. Then do a wipe data/factory reset ,then wipe chache and after that go to advanced and then wipe the Dalvik Cache. After that go to install zip from sd card and then choose from sd card. then navigate to your rom and flash it. After the flashing is done flash gapps and then reboot.
Note: To navigate in CWM use your volume keys and use the home button to select.
To enter Fastboot: Plug the usb cable side into the phone and while you are plugging it into the computer keep
your volume up key pressed.
To flash a kernel: Put the kernel you extracted from the zip into your fastboot folder.Then open a command
prompt in that particular directory ( in Windows 7 press shift in a blank place and right click).
Then enter this command fastboot flash boot boot.img(Your phone must be in fastboot
mode for this.)
Click to expand...
Click to collapse
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
aljazeek said:
Thank you, you've cleared alot of things up for me.
I hope I'll get some time to try the whole thing out and write about it here.
Click to expand...
Click to collapse
Welcome.
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
aljazeek said:
Oh, before I get myselft into this, am I free of installing any drivers? Since I've installed some drivers for rooting purposes, I'm not sure if I need to install these drivers I've downloaded for CM9
Click to expand...
Click to collapse
No, just the fastboot drivers to flash the kernel. Go to flashtool installation folder > drivers and install all of them for all devices, that should be all :good:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
aljazeek said:
Ran into a problem with ROM Manager :/ It's supposed to offer me recovery mode by rocking the volume up or down while device is rebooting, but none of these work (device boots normally).
Any idea on how to solve this?
Click to expand...
Click to collapse
Have you flashed a custom kernel?
Sent from a mango
andogeek10 said:
Have you flashed a custom kernel?
Sent from a mango
Click to expand...
Click to collapse
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
aljazeek said:
I'm not sure about that... all I know is that my phone is rooted and bootloader unlocked.
So how and which custom kernel should I flash then?
Click to expand...
Click to collapse
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
andogeek10 said:
It depends. If you wanna flash any CM or AOKP roms you have to flash thier respective kernels. If you want to flash any stock based roms you can flash any ICS or GB kernel you want like Mesa, Panic kernel etc.
As for how to flash a kernel refer to my post on the page before.
Sent from a mango
Click to expand...
Click to collapse
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
aljazeek said:
Ah, all these processes are confusing me so I apologize for forgetting about that! Reminded now.
So, to enter Clockwork recovery mode, my phone has to be connected to the PC with usb debugging on?
Click to expand...
Click to collapse
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
andogeek10 said:
No. For entering the CWMR you have to press the volune down button when the bootup logo gets brighter. For this either you must have CWMR install or else you must have a custom kernel
Sent from a mango
Click to expand...
Click to collapse
That didn't work. When the Sony logo gets brighter, a blue LED lights up for that moment.
In cwm, selecting 'Flash ClockworkMod Recovery' opens up a box where my phone model is displayed. After that, it says it's unsupported and I can manually select either 2.x or 3.x+. I've selected the 3.x+ one and in the menu it says 'Current Recovery: ClockworkMod 5.X.X.X
Shall I try with 2.x? I have no clue here.
System setting>about phone
Mind telling us your kernel version? From there we would know your current kernel
Sent from my SK17i using xda app-developers app
Like the title says I factory reset my phone in TWRP recovery and now when I boot my phone it goes to a black screen. I was trying out jelly beer rom didnt like it so i trying going back to my stock rom back up and it wasnt there..so i just factory reset it and it will not load factory boot image its just a black screen with two white lines at the top...any help with this pleaseeee....thanks
antone315 said:
Like the title says I factory reset my phone in TWRP recovery and now when I boot my phone it goes to a black screen. I was trying out jelly beer rom didnt like it so i trying going back to my stock rom back up and it wasnt there..so i just factory reset it and it will not load factory boot image its just a black screen with two white lines at the top...any help with this pleaseeee....thanks
Click to expand...
Click to collapse
the reason you cant find your back up is because all aosp 4.2.2 roms create the "sdcard0" file path for your data, instead of 4.1.x having just the "sdcard" directory. TWRP wont let you navigate back to the original directory, and flashing a stock rom or backup wont fix it. you either have to manually delete the folder on the computer or on a file manager on the phone (but a computer is recomended).
now what type of factory reset did you do? the regular option in TWRP wipes /data, /cache, and /dalvik. is that the one?
i went into twrp and hit "format data" and it told me to type yes and then it formatted everything ...so afterwards it says superuser is not installed then swipe to install it...after i go to reboot system and it says No operating system installed
antone315 said:
i went into twrp and hit "format data" and it told me to type yes and then it formatted everything ...so afterwards it says superuser is not installed then swipe to install it...after i go to reboot system and it says No operating system installed
Click to expand...
Click to collapse
yea man that format data button wipes EVERYTHING. that button should not be pressed when regularly flashing different roms. it says that because there is no operating system on your phone anymore. and there probably isnt a backup either, as im not sure what partitions that wipes in detail. can you reboot into recovery by holding down the volume down and power button until the lights flash about 10 times? see if you still have a recovery
yeah i can get back into recovery..i just dont know how to get phone to boot up...yeah i dont know why i decided to format the data..haha friggen idiot i am
should i just download stock rom and plug my phone into the computer and transfer the file over? if so do i just put it in data/media folder?
antone315 said:
yeah i can get back into recovery..i just dont know how to get phone to boot up...yeah i dont know why i decided to format the data..haha friggen idiot i am
Click to expand...
Click to collapse
do you know how to use ADB and fastboot commands? or does your storage come up when you plug it into a computer? it probably doesnt. you will have to sideload a stock rom
like cmd commands?...i know how to do them
antone315 said:
like cmd commands?...i know how to do them
Click to expand...
Click to collapse
no like adb command. like "adb shell push (zip file)" "adb devices" those kinds of things. if not, download this http://forum.xda-developers.com/showthread.php?t=2219175
after i download this then what?
antone315 said:
after i download this then what?
Click to expand...
Click to collapse
you also need to make sure you have all the correct HTC drivers for the phone. if you could previously plug your phone in and navigate the internal storage, you should be fine.
1) download a plain, stock sense 4+ ROM and get it ready
2) boot the phone into recovery
3) plug the phone into the computer
4) launch the toolkit. you should see your device in the list at the top of the toolikit. if not hit option 20.Refresh toolkit. if it still doesnt show up, you might have bigger problems
5) select option 14 and follow the prompts
6) reboot the recovery
7) check and see if you can find the rom in TWRP and install
let me know. i'll be off XDA for an hour, in about 45 minutes. but if this doesnt work, pm your gmail address and get on hangouts
i dont think its locating my phone..i went to install drivers and it says access denied.
do i have to have the htc drivers installed for it to see my phone first?
Yes. Also adb and fastboot drivers, but I think they come loaded with that tool kit
Sent from my HTC6435LVW using xda app-developers app
is it suppose to recognize my phone under fastboot or adb? and when i install a rom do i need to put zip at the end like dlx_signed_2.06.zip?
is there something i have to do to get it to recognize my device...its not recognizing it
it says adb server is out of date..killing...daemon started successfully..list of devices attached and does not have mine
can someone please help me with this issue? thanksss
antone315 said:
can someone please help me with this issue? thanksss
Click to expand...
Click to collapse
hey check your messages
Side load! Love u htc
Sent from my HTC6435LVW using xda premium
I have an lg d620r with unlocked bootloader and twrp 2.8.6.0. After update over wifi to lollipop stucks my device in the recovery twrp. I tried do flash a zip with the actually lollipop rom include root and su, it says flash succesful. The internal storage is ca 4gb free. I can't flash a other version of a recovery. I triede to flash via flashtool 2014 a kdz, but on my device says download mode but this graphik dont exist. And the flashtool says connect device. What can i do? If it not possible do repair, can i make a full brick to not boot in custom recovery for bringing to lg?
Ps: i can go thru the recovery with the filemanager on the system where the files are. Perhaps is one data missed. I can copy something?
Don't panic
Sqash said:
Ps: i can go thru the recovery with the filemanager on the system where the files are. Perhaps is one data missed. I can copy something?
Click to expand...
Click to collapse
It was same for me but if your recovery is the same (TWRP) so you can long press power off and volume up buttons wait for screen to go off and then on , release the keys and push them back again to enter LG's factory reset mode then press yes and yes again it will say factory reset procesing but it will then boot in to recovery . With TWRP you can connect phone to computer , download and put LG'S sock ROM or other like compatible CM12 .then do advanced wipe in wipe selection so it will delete everything even your rom (but not sd) and then flash your ROM cm12 or lg's stock .It worked for me so maby it work for you too
My device is off. I start with?
Dgreed620r said:
It was same for me but if your recovery is the same (TWRP) so you can long press power off and volume up buttons wait for screen to go off and then on , release the keys and push them back again to enter LG's factory reset mode then press yes and yes again it will say factory reset procesing but it will then boot in to recovery . With TWRP you can connect phone to computer , download and put LG'S sock ROM or other like compatible CM12 .then do advanced wipe in wipe selection so it will delete everything even your rom (but not sd) and then flash your ROM cm12 or lg's stock .It worked for me so maby it work for you too
Click to expand...
Click to collapse
My device is off. How i start?
umm
Sqash said:
My device is off. How i start?
Click to expand...
Click to collapse
it is off? well you need to hold power key and volume up and after lg logo appears realese and quickly hold same buttons again , if it didint work you were too slow or something just try again
---------- Post added at 12:30 PM ---------- Previous post was at 12:26 PM ----------
oh wait sorry it is power off and volume down
my bad
Makes the same
I have flashed this http://forum.xda-developers.com/showthread.php?t=3122821
Sqash said:
I have flashed this http://forum.xda-developers.com/showthread.php?t=3122821
Click to expand...
Click to collapse
did you did that advaced wipe and wrote yes before doing it ?
Advanced wipe. Two times yes
Sqash said:
Advanced wipe. Two times yes
Click to expand...
Click to collapse
IDK then try just delete or wipe everything you can try flashing other kernel too
Dgreed620r said:
IDK then try just delete or wipe everything you can try flashing other kernel too
Click to expand...
Click to collapse
What is idk?
Sqash said:
What is idk?
Click to expand...
Click to collapse
it is short saying of I Don't Know =IDK
Thank you for your help
Sqash said:
Thank you for your help
Click to expand...
Click to collapse
did it work ?
Its strange. If i flash the rom its says succesful but after lg logo goes in the recovery.
I have two options. repair my download mode to flash a kdz or brick full to no start in the twrp recovery and them send to lg
have you used the partition table tool????
Try this http://forum.xda-developers.com/showthread.php?p=55367233
Sent from my LG-D620 using XDA Free mobile app
sergioslk said:
have you used the partition table tool????
Click to expand...
Click to collapse
Yes i used partion table tool. Makes nothing. The same problem