What do i have to do to finally downgrade my spl to install custom rom?
Related
My X01HT [email protected] first splash after upgrad to WM6
i had flashed a not completed WM6 file....
Bootloader: 1.40 Olipro....
how can i flash another firmware?
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
mrvanx said:
goto the unbricking thread, you should be able to reflash a ROM using the SD card method (i think)
Click to expand...
Click to collapse
Today I got the same problem after flash a custom ROM with incorrect INITFLASHFILES.DAT.
It's not neccesary to flash from SD. Enter into Bootloader mode (tricolor screen), conect to the PC (active sync will not catch the device) and run RUUwrapper selectign 1.40+Is hard SPL to flash another nbh ROM file.
i had already unbirk it....
I by mistake flashed Rom 1.94.710.2 using SD Card, The SPL got overwritten and I am stuck with the boot loader and unable to flash any rom, Error 294.
Also not able to flash using SD card.
Any help is appreciated.
Thank you and best regards
how did the hardSPL get overwritten? I'm new to HTC hacking but isnt that supposed to be impossible?
Try to go into SPL and flash using USB. May be that works. Not sure even
try to download ship rom &flash throught USB cable
Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?
Fasty12 said:
Hi guys im going back to wm 6.5 from android, how would i go about flashing these roms(energy). I have Hspl 2.0, magldr 1.13 and cmw installed. Do i just do it via hspl or do i need a rom manager?
Click to expand...
Click to collapse
The easiest way is via SD Card method.
If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Wait...
Phone should reboot once flash is complete......
Flashing a 6.5 ROM will remove MAGLDR from your phone.
Make sure you do backups in android in case you want to go back.
Forget about CMW and rom manager.... they are android only.
Hope that helps.
If your coming from android then you already have an appropriate radio and HSPL installed.
(You can ceck this by entering bootloader, hold vol. on whilst turning the phone on)
To flash a new WM6.5 rom;
Enter Bootloader (vol down + power)
Connect via USB...
Wait for the word "serial" on the bootloader screen to change to "USB"...
Unzip the energy rom and place it in a folder with the custom ruu provided...
Run the custom RUU provided with the energy rom you downloaded...
Click to expand...
Click to collapse
i stuck in this step.. it says Error Updating Try Again
my hd2 bricked after updating to official rom
Mr.Cobbra said:
i stuck in this step.. it says Error Updating Try Again
Click to expand...
Click to collapse
i have a big problem with my hd2 usb port was broke not recognizing by any cable usb,i tried to flash official rom via sd card then update error appear what can i do
i don't know if i can save my x7500, i can only get the bootloader screen my spl is 3.05 the device is also cid locked so i can't flash any custom rom, what are your suggestions? any of u heard about goldCard? can any flash a rom with spl 3.05? what were you do if u have the same situation?
Thanks...
I have a Desire x which bricked during rooting( Unlock BL-->Root with HBOOT 1.25 version)
I have tried all combination of recovery + Rom flashing and still the OS does not boot. I tried relocking BL and RRU( failed with error)
Can anyone provide any suggestions.
There is no RUU for hboot 1.25, so in order to flash something, you need to unlock bootloader again. For selecting the right recovery to flash, read this.