Hi everybody,
I need help to unbrick my PDA.
If I power on, It shows only the tri-color page of the bootloader but without light and without any text indicating the version of IPL, RADIO, ecc.
If I connect io to the USB charger, the red led flashes, but if I take away the battery while still connected to charger, the red light stays on...
The phone had the No-GSM problem, and was flashed probably with the wrong ROM.
I've tried all the methods shown in the Thread to unbrick Hermes, but noting worked.
I've not read this tipe of brick anywhere.
Can someone please help me?
Many thanks !
Reset SPV M3100
Switch off the SPV M3100, then on the bottom of the phone you have the answer call and end call buttons in clusters of 3 buttons on each side. The Top button on the left is a dash like symbol -- above the windows button, and you have the same dash like symbol button -- on the right above the ok button. You need to hold down both the dash-like symbol buttons and the middle silver button at the same time, then restart the phone. The phone will ask you if you want to reset the entire phone memory and settings back to factory settings and confirm this by using the Query keyboard letter "R". Click R and it will wipe it and set it back to its original settings. Hope this helps. Thanks Pete from www(dot)86plex(dot)com
Related
got timeout when upgrading new rom and extrom through mtty
now device doesn't even turn on
no light or anything
any ideas ?
Try press OK button, power button & soft reset (hold for a few second) together.
or try hard reset.
not working
tried taking the battery out and connecting usb cable
this way the orange charge light turns up
but with battery inside there is nothing
damn
I have the same problem. Did you solved it?
connorm said:
got timeout when upgrading new rom and extrom through mtty
now device doesn't even turn on
no light or anything
any ideas ?
Click to expand...
Click to collapse
Looks more like you have a dead battery than anything. Check and make sure your battery works and has power, with perhaps another phone.
Hi guys,
I upgraded my phone a while back using c_shekhar's excellent ROM. I've just come back to using the phone again and after charging the phone up from completely dead I now get no buttons on the phone dialler skin. If you use the stylus where the buttons should be you do hear the keypad tones, just there are no visible buttons. I've tried several things, such as changing themes and resetting the phone (although I cant remember how to hard reset the phone) but none of this has worked. Anyone had this, or have any ideas? I did search the forum and found loads of posts on buttons and screens but nothing to help me out.
Cheers
There is a soft button (bottom left) when you are on the dial page that says keypad. Is that still there? I assume you have already checked this and pressed it, but perhaps not. It may have been renamed due to the skin you are using, removed, or perhaps you changed it yourself at some stage accidentally.
Let us know if this helps.
There is no keypad soft button. However, if I just hit random places where the buttons should be, and then press the physical call button, the phone dials the number and then the keypad soft button appears (although just the text appears, not the button itself).
Is there a way to hard reset this phone with the WM2005 ROM? I have tried what used to work on the factory installed O2 ROM (holding the power button and using the stylus to press the reset button), but this doesn't seem to do the trick as all my details and info are still there when it fires up again.
I have also taken the battery out and left it for a couple of days to let the backup battery die too. This hasn't helped.
it appers that the dialer is corrupted..try to hard reset else try other Dialer skins..search the forum's for them
Hello,
I woke up this morning, tried to turn on the screen on my Hero, and nothing came up.
Ok, so i thought id take the battery out, put it back in, try again.
The Hero vibrates, shows the 'HERO' logo, then turns off...
I have not flashed any custom roms from here, all that has been done is the phone has been updated to the latest HTC ROM they offered.
As a quick note, when i take the battery out, and put it back in, then plug into the PC or wall socket, the light does come on at the top (green).
Any help as to why this has happened? And how to get it working again.
I have searched on the forums for information, but could not find/understand what to do
Thanks, Adam
EDIT: Ok i found out hoe to put the phone into recovery, then i flashed the HTC ROM again using thier RUU. It flashed fine, then rebooted, and again does not go past the HERO screen, just turns off
any help would be appreciated please? i have tried flashing using the RUU twice and still wont get past the HERO screen, screen just blacks out
EDIT: 79 views and no replies? any help would be appreciated, the amount of talent on here im sure someone could give me a hand? pleeeeease
That's a real shame.
It seems like it's hanging on a internal memory problem (the same reason why somebody has to wipe before flashing)
i got this from an other site maybe it could be of any help for you
According to the official helpdesk of HTC (for me in France), you had to:
1/ Switch off the phone (either removing the battery or shutting down by holding the "end call" button for few seconds
2/ While being switched off, hold the "home" (house) and "back" (the arrow in the lower right corner)
3/ Hit briefly the "end call" button" while still holding the "home" and "back" buttons.
4/ Release the "home" and "back" button, a white screen containing technical information should appear, with a red message asking for hitting the "menu" button.
5/ Hit the "menu button", the Hero will now boot with factory settings.
Factory settings means that every information stored on the ROM (NOT your SD memory card)
Click to expand...
Click to collapse
Greetz,
Michel
ok i have tried that a few times, but this has not worked, it simply just reboots and the HERO logo appears, then goes black
when you installed a new rom did you flash the radio too? i find the radio sometimes gives problems. can you not try another rom to flash?
no, i downloaded the ROM from the HTC website, link below. This ROM has been running fine until this morning when i tried to turn the screen on.
http://www.htc.com/uk/SupportDownload.aspx?p_id=283&cat=2&dl_id=671
I have an s200 device. My s200 had a small crash in the floor (from my pocket) and from that moment when I press the power button the only thing that happens is that the screen turns white and after few seconds Grey and then black...
I connected to the pc but it always seems to find and then loose the device (after 1 second).
I tried hard reset...nothing (press comm button and the pin in the soft reset)
Is this dead? I am desperate so many days
Solution
1st. u've 2 start ur pda in bootloader mode (triple colored screen).
2nd. Connect it 2 PC and use ActivSync 4.1
3rd. Install the rom u want.
4th. 've FUN !!!
luverh8r said:
1st. u've 2 start ur pda in bootloader mode (triple colored screen).
Click to expand...
Click to collapse
I can't start in bootlader mode any suggestion?
vamvakoolas said:
I have an s200 device. My s200 had a small crash in the floor (from my pocket) and from that moment when I press the power button the only thing that happens is that the screen turns white and after few seconds Grey and then black...
I connected to the pc but it always seems to find and then loose the device (after 1 second).
I tried hard reset...nothing (press comm button and the pin in the soft reset)
Is this dead? I am desperate so many days
Click to expand...
Click to collapse
something happening with lcd connector or lcd driver.... try to disassembly and check conectors and board integrity...
Hi,
i have some problems with mt HTC aria.
it was working fine, but not for my carrier, so i tried to unlock it.
after few tries the main touch-keys (home, menu, back, search) stopped responding.
i tried to hard reset and install everything all over again but somehow it crashed in the middle and now i can't do the hard reset again.
if i turn it on it shows me a white screen with these words (in green):
liberty pvt ship s-off
hboot-1.02.0000
microp-031b
touch panel-stn21_03
radio-7.16.35.11
nov 4 2010,23:12:58
RRU
i have no clue how to continue/restore.
can someone help me? pleeeeese!
nurief said:
Hi,
i have some problems with mt HTC aria.
it was working fine, but not for my carrier, so i tried to unlock it.
after few tries the main touch-keys (home, menu, back, search) stopped responding.
i tried to hard reset and install everything all over again but somehow it crashed in the middle and now i can't do the hard reset again.
if i turn it on it shows me a white screen with these words (in green):
liberty pvt ship s-off
hboot-1.02.0000
microp-031b
touch panel-stn21_03
radio-7.16.35.11
nov 4 2010,23:12:58
RRU
i have no clue how to continue/restore.
can someone help me? pleeeeese!
Click to expand...
Click to collapse
That's just the bootloader so you could try flashing a rom. Do you have a custom recovery installed?
Theonew said:
That's just the bootloader so you could try flashing a rom. Do you have a custom recovery installed?
Click to expand...
Click to collapse
hi,
i don't really know what or how.
can you instruct me step by step?
the thing is that i was trying to install this file : HTC_Aria_for_ATT_Android_2.2_ROM_Update.exe and in the middle of the process my USB cable disconnected, and the phone doesn't boot since.
it just show me a white screen with the text i wrote up there (and it's ruu, not rru, obviously) when i turn it on, and it doesn't go to the hard reset menu even if i hold the down-volume button when i press the power button.
nurief said:
hi,
i don't really know what or how.
can you instruct me step by step?
the thing is that i was trying to install this file : HTC_Aria_for_ATT_Android_2.2_ROM_Update.exe and in the middle of the process my USB cable disconnected, and the phone doesn't boot since.
it just show me a white screen with the text i wrote up there (and it's ruu, not rru, obviously) when i turn it on, and it doesn't go to the hard reset menu even if i hold the down-volume button when i press the power button.
Click to expand...
Click to collapse
You could just boot into fastboot (choose "fastboot" from the list in that menu) and re-run the RUU (Rom Update Utility).
nurief, you may need to pull out the battery to get out of the RUU screen. After putting the battery back in, hold down the trackpad button (that button below the screen) and press the power button, then release the trackpad button. It will say FASTBOOT if it worked correctly.
The RUU should be able to detect the phone while it's on the FASTBOOT screen.
drumist said:
nurief, you may need to pull out the battery to get out of the RUU screen. After putting the battery back in, hold down the trackpad button (that button below the screen) and press the power button, then release the trackpad button. It will say FASTBOOT if it worked correctly.
The RUU should be able to detect the phone while it's on the FASTBOOT screen.
Click to expand...
Click to collapse
do i need a certain files to be in the SD card?
i tried the trackpad boot, but i shows me a black screen with "HTC" in the center and four triangles with "!" in them at the four corners of the screen.
nurief said:
do i need a certain files to be in the SD card?
i tried the trackpad boot, but i shows me a black screen with "HTC" in the center and four triangles with "!" in them at the four corners of the screen.
Click to expand...
Click to collapse
Make sure you keep holding down the trackpad button until the screen turns on, then let go. Sorry, I should have been more clear about that.
If it still doesn't work, try the same process but this time hold down volume down button instead of the trackpad button. It should say HBOOT in blue near the top of the screen. Then after about 10 seconds, press power button once more. It should say FASTBOOT in red near the top now.
If either way works, then connect the USB cable to your computer then start up the RUU again and it should work fine.
drumist said:
Make sure you keep holding down the trackpad button until the screen turns on, then let go. Sorry, I should have been more clear about that.
If it still doesn't work, try the same process but this time hold down volume down button instead of the trackpad button. It should say HBOOT in blue near the top of the screen. Then after about 10 seconds, press power button once more. It should say FASTBOOT in red near the top now.
If either way works, then connect the USB cable to your computer then start up the RUU again and it should work fine.
Click to expand...
Click to collapse
it doesn't work.
i tried everything. turning on when the USB is plugged and unplugged, fastboot by holdin the trackpad and down-volume button...
when i plug the USB and unplug it the phone shows me the white screen with the text in to of this thread, and the "RUU" glows in orange background (like the fastboot) but i cannot choose the option even if i press the I/O button.
any ideas?
thanks.
Go to the IRC channel #liberatedAria on Freenode and ask if someone knows what to do. If no one is around, try again later.
If you don't know how to get on IRC, you can access it via web: http://webchat.freenode.net/?channels=#liberatedAria
Edit: From searching around online it seems like making a gold card might fix your problem.
drumist said:
Go to the IRC channel #liberatedAria on Freenode and ask if someone knows what to do. If no one is around, try again later.
If you don't know how to get on IRC, you can access it via web: [link] (the system doesn't let me send reply with links...)
Edit: From searching around online it seems like making a gold card might fix your problem.
Click to expand...
Click to collapse
thanks a lot, they helped me there to bring the device back to life.
but the old problem is still here.
the navigation touch keys (home, menu, back and search) doesn't respont to any human contact.
i figured out that if i touch the top of the screen - the backlight ot the keys turns on, but nothing more than that.
* the chat manager told me that he can't help me with that because they deal with rooted phones only, and i don't think mine is...