Bricked Razr - Motorola Droid RAZR

My razr seems bricked and I if I try to flash ICS another time with RSD Lite, when it boots it`s stuck on yhe Motorola moving logo screen. I donĀ“t know what to do, please help me.

Wipe Data and cache in Recovery and reboot your Phone.
Gesendet von meinem XT910 mit Tapatalk 2

Dind't work

Then flash again, before your battery drains to low.

I flashed ICS like five times, I think the problem is the Webtop partition, but the ICS Rom doesn't include it.

I used RSD now many times without the webtop_partition.
But you can try this
http://forum.xda-developers.com/showthread.php?t=1761546
Last Part (Fastboot) of the Tutorial.

The tutorial is too advanced for me xD. I had an idea, can I add the GB webtop file to the ICS rom and add the webtop line in the xml file?

Yes, that should work, too.
But why is it advanced?
Fastboot for the webtop_signed
DOWNLOAD
PART1 + PART2
This is the Webtop_signed of the 651.167.26.XT910.Retail.en.EU that was used to get on the 672.180.33.XT910.Retail.en.EU some times ago.
If you have an GB 2.3.6 Fastboot File of your Region and wanna use this webtop_signed, you can only download the FlashME.bat and add your File into the Folder!
http://www.mediafire.com/download.php?qibcf1inyb7ao8y
INSTALLATION
After you downloaded an extracted the 2 Parts you'll get an Folder called Webtop 2.3.6.en.EU.
In this you'll find the FlashMe.bat and the Webtop_signed.
Connect your RazR in AP Fastboot Modus with your PC and doubleclick the FlashMe.bat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your RazR will reboot after the flash was sucessfull
Now you can follow the steps to get your second system on your preinstalled ICS.
This is all you need. Download, unpack, connect in AP and click the FlashME.
Almost the same like RSD.

Yes, you're right, but it scared me, I used to have a Samung Galaxy Ace and everything was much easier. I followed the tutorial and it booted correctly. Thanks a lot, I'm really grateful to you. Sorry if my english was bad at some ponit, I'm Spanish

No problem, my english is also not the best. But we try it
Glad to hear, it works for you.

Related

[Q] Boot failure

Hello,
I have a big probleme ! I tryed to instal a rom with recovery but, the installation failed and the screen is stuck on the motorola logo
I tryed to installing fastboot file EU (GSM) with RSD lite but after flashing I have this at boot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tryed several time to reinstal fastboot file but it's the same problem.
Thanks to your help
I use GSM EU Razr.
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Wiplex said:
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Click to expand...
Click to collapse
Can you help me out too? I'm exactly in the same poopoo as Eagledig. Thanks in advance!
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Wiplex said:
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Click to expand...
Click to collapse
Can I flash this file on whichever rom I'm on?
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
I have the same problem
What should i do?
I got only the ap fast boot failure
drolgnir said:
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
Click to expand...
Click to collapse
Yes..................................definitely get the battery charged and try different ROM. MattGroff's utility 1.7 worked for me to upgrade my rooted GB to ICS.
What is your original rom? Did you install the motorola drivers?
Sent from my XT910 using xda premium

Help Please soft brick ( FIXED )

Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA

[Q] Screwed up while flashing - what now?

Hi guys, sorry if this has been explained somewhere - I've really tried to find answers for myself but navigating through the countless threads on this forum is a major pain, so I gave up.
I have a new european ICS GSM Motorola RAZR xt910 and I've tried to flash a custom rom on it. I installed and configured BootMenu Manager, downloaded and converted the SVN 1.1 rom from the development section on this forum, rebooted and now I'm stuck on the blue cyanogen animation thingie going on and on forever. For some reason the BootMenu thing doesnt appear when I reset my device, which is strange, since i would expect a recovery to actually allow me to recover. Apparently that is not the case.
So anyway, I can only boot to the black and white menu through holding up and down volume buttons. From there i can go into stock recovery (says it cant mount sdcard, so it appears useless for me) and AP FastBoot.
I already tried to recover with RSD Lite as the tutorial on this thread says - http://forum.xda-developers.com/showthread.php?t=1539192 - but of course the firmwares there are GB and cant be installed on ICS.
This is really frustrating, could somebody please help me and point me in the right direction?
use this to flash ICS sbf file using RSD Lite (GSM)
http://www.eternityproject.eu/topic...-official-fastboot-package-for-motorola-razr/
hi, i've the same problem with my razr (GSM). I'm using a factory cable because my battery is too low.
However...
alijs said:
use this to flash ICS sbf file using RSD Lite (GSM)
http://www.eternityproject.eu/topic...-official-fastboot-package-for-motorola-razr/
Click to expand...
Click to collapse
I've tried with RDS Lite and with "Fla*** IT" (by ethernity project) , but nothing. My razr is still dead.
Any idea?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
garsim said:
Any idea?
Click to expand...
Click to collapse
Ok, solved. Windows 8 is the evil! :good:
With Windows 7 I managed to recover, in few minutes, my Razr

Intermittent black and white lines on screen

Hey guys.....
A friend of mine gave a Galaxy S3 (GT-I9300) , but I have to fix it before use it... what's going on it.... Well... If I turn it on, it shows some intermittent black and white lines on the screen, as you can see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but, when I enter in Odin mode, the screen is ok
So, I assumed there is no hardware issue in this mobile.... so, i thought it could be just a ROM error or something alike.... so, I downloaded KIES and Odin ((3.07, 3.09 and 3.10)).... I started on Odin.... I tried to flash the stock ROM on it, but I went to the error missing PIT partition.... after I read what is a PIT partition, I downloaded only the PIT file and tried to flash it alone and together with the MD5 ROM file..... So, NO.... nothing worked....
So, I went into the KIES and tried to used the all 3 options on Tools Menu .... the first one, doesn't work ((or I don't know what to do...))... the second one works.... asks for the serial number and start the progress bar and everything. But, when it reaches 70% just stops and says there is an error
.. and the third one doesn't help... at all....
So guys this is it what I already done so far in here and this is what I know what it could be done.... any thoughts or ideas to help me here?
I'm using a windows 8.1 x64....
Thanks very much for any help and assistance here =D
I'm reading something about MSKIP Toolkit and Heimdal.... any of these works in my case?
I'm reading this thread too - http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367 - but my phone does not reboot.... so, i'm stuck on step 3....
and in here - https://www.androidpit.de/forum/545386/there-is-no-pit-partition-and-re-partition-operation-failed - these guys are facing the same issue as mine....
So, no further ideas to do.... any in your side?
Cheers =D
any thoughts or ideas guys??
any ideas at all guys?

Unable to mount storage. And I can't boot in to system.

please help me I have been trying solutions for 2 months but nothing works. I also tried to do
1 go to wipe
2 go to advanced wipe
3 select date
4 repair or change flie system
5 change flile system ext 2
6 then replace ext 4
but it does not work. when i try to boot in to the system it goes into an infinite loading screen. please HELP (I used google translator because my english sucks)
@Boyko99
Either boot-loader broken or Android system corrupted. Re-flash Stock ROM.
I don't know if my answer came to you so I'll rewrite it
jwoegerbauer said:
@Boyko99
Either boot-loader broken or Android system corrupted. Re-flash Stock ROM.
Click to expand...
Click to collapse
could you tell me how to find the Stock ROM. I need help because I'm not very practical in modding
Boyko99 said:
could you tell me how to find the Stock ROM.
Click to expand...
Click to collapse
GIYF ...
i downloaded this now what should i do? and with what program?
jwoegerbauer said:
GIYF ...
Click to expand...
Click to collapse
i downloaded this now what should i do? and with what program?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Boyko99
Because you avoided to name phone's brand/model in this thread's title you can't really get advised.
Anyway:
Assumed these requirements
got fulfilled, the USB-driver suitable to your phone is installed on PC,
then the basic steps to perform are
1) Unlock phone's boot-loader, if not done yet
2) flash the ROM
@jwoegerbauer
I can't start the phone so I don't know how to do it I'm stuck in twrp because if I try to turn it on it goes into a loop
@Boyko99
My POV:
This is the price that people who think they must improve (?) phone's Android, will say put up a better (?) ROM / Recovery than that what gets pre-installed by OEM/Carrier ( in their R&D department there are certainly no idiots sitting around ), pay.
@jwoegerbauer
i have a note 3 its the worts rom of all

Categories

Resources