Hi guys, sorry if this has been explained somewhere - I've really tried to find answers for myself but navigating through the countless threads on this forum is a major pain, so I gave up.
I have a new european ICS GSM Motorola RAZR xt910 and I've tried to flash a custom rom on it. I installed and configured BootMenu Manager, downloaded and converted the SVN 1.1 rom from the development section on this forum, rebooted and now I'm stuck on the blue cyanogen animation thingie going on and on forever. For some reason the BootMenu thing doesnt appear when I reset my device, which is strange, since i would expect a recovery to actually allow me to recover. Apparently that is not the case.
So anyway, I can only boot to the black and white menu through holding up and down volume buttons. From there i can go into stock recovery (says it cant mount sdcard, so it appears useless for me) and AP FastBoot.
I already tried to recover with RSD Lite as the tutorial on this thread says - http://forum.xda-developers.com/showthread.php?t=1539192 - but of course the firmwares there are GB and cant be installed on ICS.
This is really frustrating, could somebody please help me and point me in the right direction?
use this to flash ICS sbf file using RSD Lite (GSM)
http://www.eternityproject.eu/topic...-official-fastboot-package-for-motorola-razr/
hi, i've the same problem with my razr (GSM). I'm using a factory cable because my battery is too low.
However...
alijs said:
use this to flash ICS sbf file using RSD Lite (GSM)
http://www.eternityproject.eu/topic...-official-fastboot-package-for-motorola-razr/
Click to expand...
Click to collapse
I've tried with RDS Lite and with "Fla*** IT" (by ethernity project) , but nothing. My razr is still dead.
Any idea?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
garsim said:
Any idea?
Click to expand...
Click to collapse
Ok, solved. Windows 8 is the evil! :good:
With Windows 7 I managed to recover, in few minutes, my Razr
Related
Ok, new to HD2, just tried to flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[ROM][WWE][--grzegorz10_Dusk_Ultimate_2_v1.20--]
to T-Mobile US HD2 and it wouldnt go past 1%. Errored to recovery. Is it bricked, did I flash a non-compatible Rom?
Is there any way to recover? Tried T29, no go past 0%.
Any help please tia
huggs said:
Ok, new to HD2, just tried to flash
[ROM][WWE][--grzegorz10_Dusk_Ultimate_2_v1.20--]
to T-Mobile US HD2 and it wouldnt go past 1%. Errored to recovery. Is it bricked, did I flash a non-compatible Rom?
Is there any way to recover? Tried T29, no go past 0%.
Any help please tia
Click to expand...
Click to collapse
You must Have HSPL!
- Do a task 29 (not essential, but recommended)
- Flash the 2.10.50.08_2 radio (not essential, but recommended)
- Flash The ROM
- Hard Reset (hold the volume up and down button once the flashing reaches 100%)
- Post your feedback
That's taken from Shu.[OP] that was posted on Cruzer's HD2 ROM. It's what you need to do to flash a ROM. Long as you don't use a .51 radio, you're fine. Example: 2.10.50.08_2 is good for Tmobile USA, but if you had a .51 in the radio, it'd brick your cell. All the basics are covered in the tutorials in the HD2 General forums or just do a search for it. Make sure you do the right HSPL. You can do a search to find that out as well. To get into bootloader, just pull the battery and hold down the bottom part of the volume button and then put the battery back in and turn it on. Hold it till you see the rainbow screen. Dusk is good for TMOUS. I've used it and it's pretty cool.
Think I had wrong radio. Trying to recover now...
huggs said:
Think I had wrong radio. Trying to recover now...
Click to expand...
Click to collapse
Doesn't have to be the one I listed. I use 2.12.50.xx
Dusk Is Compatible with T-Mobile.
To every one that want to know.
Of course Dusk Roms can be used on the T-Mobile US
Reason I am so sure and why veru easy to check is that
all of his Beta Theme has T-Mobile US to flash his test roms
on.
Regards
Obalia73
Hi xda community!
I've faced with a big problem. I'be been using Neutrino 1.4S rom. Then I desided to try Neutrino 2.1. I flashed it via CWM (5.0.2.7) and just after that flashed an Atrix-CM7-Kernel-024b4-ext4-1.30GHz.zip & rebooted.
And there was no red motorola logo (Dual Core technology) anymore but list with the options like:
- RSD
- Fastboot
...
- Android recovery
etc.
Something like this screenshot but w\out message "Failed to boot"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no actual photo of that screen as I had no camera with me ((
After 5 sec no pressing any key Neutrino started booting but stuked on boot animation. Screen was on & off periodicaly. But it didn't boot.
I tried to flash Neutrino 2.1 via CWM once again. But this time w\out flashing of faux 024b4 kernel. Result - the same.
Then Neutrino 1.4 S. Result - same.
Finally I flashed a stock AT&T rom (4.5.91) via RSD Lite. It booted successfully but...!! But no soft key responce! The key area is seems like a part of the screen. Like down part of screen been shifted down to key's area.
And I'm stucked on Blur registration as I can't open the keyboard to skip registration and can't pass it as I dont have a wifi spot around me.
Any saggustions?
P.S> Sorry for my English is so far from perfect. But I hope you've understood everything.. Last hope on you!
Here's the place where I downloaded faux 024b4 kernel
I have found a thread about the same problem like mine and I understood that I did the same steps as topic starter - TOPIC
liebowa said:
I selected 0kb. I should have just pulled battery just then, thinking about it now.
Anyways, I'm now getting a new menu when the phone starts that lists all of the OS boot choices.
If I don't select any choice fro mthe list, I get test that says: "Powering on BP" then next line "Cold-booting LINUX" then next line "Reading ODM Fuse: 1", then it boots into CM9.
But, the screen calibration is wrong and the buttons don't work on the phone.
Click to expand...
Click to collapse
this solved my problem
i had to open the bootloader by flashing this sbf since my usb debugging was disabled.
extract it first, then flash with RSD Lite.
snoer said:
this solved my problem
i had to open the bootloader by flashing this sbf since my usb debugging was disabled.
extract it first, then flash with RSD Lite.
Click to expand...
Click to collapse
Thank u so much! It really helped me! Yuuppi!! )
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA
My razr seems bricked and I if I try to flash ICS another time with RSD Lite, when it boots it`s stuck on yhe Motorola moving logo screen. I don´t know what to do, please help me.
Wipe Data and cache in Recovery and reboot your Phone.
Gesendet von meinem XT910 mit Tapatalk 2
Dind't work
Then flash again, before your battery drains to low.
I flashed ICS like five times, I think the problem is the Webtop partition, but the ICS Rom doesn't include it.
I used RSD now many times without the webtop_partition.
But you can try this
http://forum.xda-developers.com/showthread.php?t=1761546
Last Part (Fastboot) of the Tutorial.
The tutorial is too advanced for me xD. I had an idea, can I add the GB webtop file to the ICS rom and add the webtop line in the xml file?
Yes, that should work, too.
But why is it advanced?
Fastboot for the webtop_signed
DOWNLOAD
PART1 + PART2
This is the Webtop_signed of the 651.167.26.XT910.Retail.en.EU that was used to get on the 672.180.33.XT910.Retail.en.EU some times ago.
If you have an GB 2.3.6 Fastboot File of your Region and wanna use this webtop_signed, you can only download the FlashME.bat and add your File into the Folder!
http://www.mediafire.com/download.php?qibcf1inyb7ao8y
INSTALLATION
After you downloaded an extracted the 2 Parts you'll get an Folder called Webtop 2.3.6.en.EU.
In this you'll find the FlashMe.bat and the Webtop_signed.
Connect your RazR in AP Fastboot Modus with your PC and doubleclick the FlashMe.bat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your RazR will reboot after the flash was sucessfull
Now you can follow the steps to get your second system on your preinstalled ICS.
This is all you need. Download, unpack, connect in AP and click the FlashME.
Almost the same like RSD.
Yes, you're right, but it scared me, I used to have a Samung Galaxy Ace and everything was much easier. I followed the tutorial and it booted correctly. Thanks a lot, I'm really grateful to you. Sorry if my english was bad at some ponit, I'm Spanish
No problem, my english is also not the best. But we try it
Glad to hear, it works for you.
So I have this phone Xiaomi Redmi 10X, and I wanted to put Pixel Experience 11.0 in it, after seeing this thread on GitHub.
To my surprise, following steps on that link was not that easy!
I flashed MIUI 22.1.19 manually (not in the correct way), and I ended up with a hard bricked phone.
Yesterday, while Googling about that, I managed to run into a tool called MTKClient v2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and it solved my problem, by flashing original firmware and got it correctly working with the default MIUI 13 system.
BUT, that wasnt enough for me, because I still wanted to put Pixel Experience in it since I like it so much and think it is so sexy!!! So I, without knowing what I was doing, erased all the partitions in my phone with that tool.
Now, I cant get it to connect to that tool to work or connect with my device. On the cmd behind though, I do get some hope after seeing that device is still recognized in some way, but that's all there is to it, it doesnt go further, only "Phone detected: Reading model info".
I've tried to wait and keep both volume buttons pressed at the same time, but to no avail.
Since this, I've tried several tools but none is working to reset my partition table to original state, since I think that's my problem.
Any idea how to fix it?
Jjflick said:
Did you try cross-patching it with a razor cable?
Click to expand...
Click to collapse
No. What is that?
Jjflick said:
Did you try cross-patching it with a razor cable?
Click to expand...
Click to collapse
Even if it connects, it shows no partitions to write over.
What it needs, is to first restore the erased partitions, I think, and then writing (flashing) the firmware into it.