Is this bricked? - Vibrant Q&A, Help & Troubleshooting

When I press the power button I am given a screen of black background with orange/red font with these words:
RST_STAT =0x1
PWIC_IRQ1=0x3c
PWIC_IRQ2=0x0
PWIC_IRQ3=0x0
PWIC_IRQ4=0x0
PWIC_STATUS1=0xc0
PWIC_STATUS2=0x2c
Okay what happened was, that I was in download mode, I had Odin3, with re-partition checked (all three were checked), and a pit with eclair 2.1 target. But I forgot to set PDA target and clicked start. After it said PASS and blue in first box. The status bar at the lower left box said REMOVED. So I thought it meant to remove my phone. So I removed phone and closed ODIN. Now it won't boot...
Any advice?

Did you try and start over with odin??
Sent from my SGH-T959 using xda premium

stuntastic206 said:
Did you try and start over with odin??
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
I have been making several attempts to get to downloader mode so I may ODIN it back up again, but all have been unsuccessful.
Also read other threads on JIG and boot-up opitions, but those seem to require to be stuck in the carrier icon part of the bootup.

ne[m]o said:
I have been making several attempts to get to downloader mode so I may ODIN it back up again, but all have been unsuccessful.
Also read other threads on JIG and boot-up opitions, but those seem to require to be stuck in the carrier icon part of the bootup.
Click to expand...
Click to collapse
A jig could fix your problem potentially, you don't have to be at a certain screen for it to work. I can plug my jig into my phone with the phone completely off and it will boot into download mode....
Sent from my SGH-T959 using xda premium

yea, a jig may work for you...I myself have never encountered the specific problem you are describing but a jig should take you into dl mode from a currently off device. They are pretty inexpensive too so it's worth the chance I'd say
Sent from my SGH-T959 using xda premium

Xenoism said:
yea, a jig may work for you...I myself have never encountered the specific problem you are describing but a jig should take you into dl mode from a currently off device. They are pretty inexpensive too so it's worth the chance I'd say
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Can I purchase a made jig?

ne[m]o said:
Can I purchase a made jig?
Click to expand...
Click to collapse
Mobiletechvideos.com
Sent from my SGH-T959 using xda premium

Related

[Q] USB jig

Edit 10/11/12
I received my jig from mobiletechvideos.com today. It worked as advertised. It reset the triangle, as well reset the custom binary download count to No, and reset current binary to "Samsung Official" even though I am running entropy512's 10092011 kernel.
Here is a link to a video, mine works just like the video
http://www.mobiletechvideos.com/blo...adds-sgs-ii-as-supported-jig-model/#more-1069
----------- original post below -------------
Has anyone tested a usb jig with the att gs2 yet?
It should work the same as with the i9100 version, but I was just wondering if anyone who has the phone that might have a jig and tested it yet.
I just tested my jig (I am rooted and had the triangle on my att version) and my count now says NO and the yellow triangle is gone.
Thanks, I wanted to just make sure before I bought our made one.
Sent from my SAMSUNG-SGH-I777 using XDA App
no problem man....glad you asked because i never would have tested it lol. So fantastic question!
My captivate jig did not work. Had to use the button combo and plug in usb.
Sent from my SAMSUNG-SGH-I777 using xda premium
longr6 said:
My captivate jig did not work. Had to use the button combo and plug in usb.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
good to know. i guess i will not be able to use my captivate usb jig
@Skyler2Dope
where can i get this jig? might come in handy someday. and i also want to get rid of my yellow triangle too.
Ebay, Amazon, xda market, mobiletechvideos.com or you can make on yourself just google "diy USB jig"
simpl3lang said:
@Skyler2Dope
where can i get this jig? might come in handy someday. and i also want to get rid of my yellow triangle too.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I777 using XDA App
Skyler2Dope said:
I just tested my jig (I am rooted and had the triangle on my att version) and my count now says NO and the yellow triangle is gone.
Click to expand...
Click to collapse
If I recall correctly, there are a few different possible resistor values for jigs? Which one is yours?
Now that I have a device with the bootloader counter, I need to get some resistors and finally open that package of MicroUSB breakouts from Sparkfun.
I'm considering buying the SGS II in the next week, what exactly does the Jig do? I didn't see much in terms of why you would need this for rooting so I figured I would inquire.
It will put your phone into download mode as long a your bootloaders are not corrupted (which can be done by other methods also), but more importantly it resets the binary flash counter to zero and removes the yellow triangle from the boot splash screen if you have a custom modified kernel or ROM flashed to your sgs2 phone.
All in all not a necessary device, but very useful to those who flash and modify their phone
Sent from my SAMSUNG-SGH-I777 using XDA App
So if I am not mistaken it's just a way to prevent AT&T Support from visually seeing you have at somepoint flashed a different kernel and theoretically voided the warranty.
dayv said:
It well put your phone into download mode as long a your bootloaders are not corrupted (which can be done by other methods also), but more importantly it resets the binary flash counter to zero and removes the yellow triangle from the boot splash screen if you have a custom modified kernel or ROM flashed to your sgs2 phone.
All in all not a necessary device, but very useful to those who flash and modify their phone
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
naturefreak85 said:
So if I am not mistaken it's just a way to prevent AT&T Support from visually seeing you have at somepoint flashed a different kernel and theoretically voided the warranty.
Click to expand...
Click to collapse
That or just get rid of the yellow triangle if it annoys you.
Sent from my SAMSUNG-SGH-I777 using XDA App
dayv said:
That or just get rid of the yellow triangle if it annoys you.
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
Oh that wouldn't bother me in the least considering how rarely I reboot my device. Thanks, I appreciate the help. I anticipate that the community will have roms churned out left and right for this device based off the ease of hacking and the number of ROMs that were available for the Captivate.
longr6 said:
My captivate jig did not work. Had to use the button combo and plug in usb.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
my captivate jig worked on the S II
I think we will see a few people with old jigs that do work and old jigs that don't and it will be because slightly off the mark resistance. I bet those whose old jig that does not work will just need to tweak their jig by an ohm or two.
By the way I ordered a jig from mobiletechvideos.com yesterday and I will report back on if it works when I get it here.
anilkuj said:
my captivate jig worked on the S II
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I777 using XDA App
anilkuj said:
my captivate jig worked on the S II
Click to expand...
Click to collapse
Yes, mine did too!
sorry for the noob question. Which method did you use to root?
http://forum.xda-developers.com/showthread.php?t=1285894
This way you will have root +cwm recovery
Vongabe14 said:
sorry for the noob question. Which method did you use to root?
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I777 using XDA App
shaxs said:
Yes, mine did too!
Click to expand...
Click to collapse
Do you recall how many ohms your jig is and what wattage? I built mine with 301 ohms @1/4 Watts. Would unbrick Captivate to DL mode, but not soft-bricked Infuse. It would put working Infuse into DL mode though?????
an INFUSION of REALITY

Possibly bricked phone?

Okay, so I just bought my Galaxy S2 a few hours ago came home and went to root it just like I've done every android phone when I get it. So far I've had a G1, HTC Hero and a HTC Evo 4G. So I'm not really new to doing any of this but I wouldn't say I'm any expert either. I used the tutorial for rooting from here (http://forum.xda-developers.com/showthread.php?t=1301682) and it was this youtube video. (http://www.youtube.com/watch?v=R-2Z2dKsuio) I tried to do it and got all the way until the point where you push start and then it said that it failed. Now all I can get my phone to do is pop up to a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have looked for a recovery mode option in Kies but can't find anything. The only thing I find is something about an Emergency Recovery and when I try that it asks for a pin or something. If anybody can help it'd be awesome!
What were you trying to flash? with Odin, right?
Remove the battery, hold both volume buttons, plug in USB, keep holding volume buttons.... does it enter download after ten seconds or so?
Try with this stuff using odin if you can enter download.
http://forum.xda-developers.com/showthread.php?t=1286432
Then enter 3 button recovery and wipe data.
See if it boots.
Disclaimer: I'm no pro. This is just what I'd do. I'm not 100% certain new phones are identical to phones from October 2nd.
Sent from my SGH-I777 using xda premium
jc1337 said:
Okay, so I just bought my Galaxy S2 a few hours ago came home and went to root it just like I've done every android phone when I get it. So far I've had a G1, HTC Hero and a HTC Evo 4G. So I'm not really new to doing any of this but I wouldn't say I'm any expert either. I used the tutorial for rooting from here (http://forum.xda-developers.com/showthread.php?t=1301682) and it was this youtube video. (http://www.youtube.com/watch?v=R-2Z2dKsuio) I tried to do it and got all the way until the point where you push start and then it said that it failed. Now all I can get my phone to do is pop up to a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have looked for a recovery mode option in Kies but can't find anything. The only thing I find is something about an Emergency Recovery and when I try that it asks for a pin or something. If anybody can help it'd be awesome!
Click to expand...
Click to collapse
i still have a similar issue
http://forum.xda-developers.com/showthread.php?t=1461620
then the phone says "Firmware upgrade encountered an issue"
weirdly the only way i was able to get back to download mode is when i flash the root(GalaxyS2ATTRootZedomax) via odin (put in pda)
you can try , but im still stuck and my phone isnt booting or flashing
dont know if this will work with you (so dont do my way unless your sure it wont harm)
33t said:
What were you trying to flash? with Odin, right?
Remove the battery, hold both volume buttons, plug in USB, keep holding volume buttons.... does it enter download after ten seconds or so?
Try with this stuff if you can enter download.
http://forum.xda-developers.com/showthread.php?t=1286432
Disclaimer: I'm no pro. This is just what I'd do. I'm not 100% certain new phones are identical to phones from October 2nd.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
It kind of goes to download, it goes to that screen where it tells you to click volume up to go into download and then you click volume up and it goes to the screen where it says the whole "firmware upgrade encountered an issue....." and which one should I try out of the four? I wasn't able to root my phone or install custom roms or anything. it messed up right from the beginning... :/
jc1337 said:
It kind of goes to download, it goes to that screen where it tells you to click volume up to go into download and then you click volume up and it goes to the screen where it says the whole "firmware upgrade encountered an issue....." and which one should I try out of the four? I wasn't able to root my phone or install custom roms or anything. it messed up right from the beginning... :/
Click to expand...
Click to collapse
http://www.attdroids.com/forum/samsung-galaxy-s2/3471-how-root-your-galaxy-s2.html
this was what i did
Ten characters
alsaqr said:
http://www.attdroids.com/forum/samsung-galaxy-s2/3471-how-root-your-galaxy-s2.html
this was what i did
Click to expand...
Click to collapse
wait, so is your phone working now?
I'm confused. You never flashed anything and the phone won't boot?
Can you enter recovery? (Hold all three buttons until you see text)
Sent from my SGH-I777 using xda premium
Also make sure youve exited Kies. Kill the process. You just need the drivers.
Sent from my SGH-I777 using xda premium
33t said:
I'm confused. You never flashed anything and the phone won't boot?
Can you enter recovery? (Hold all three buttons until you see text)
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I tried flashing the .tar from this (http://www.youtube.com/watch?v=R-2Z2dKsuio) video to give myself root but it gave me an error and didn't actually flash. and now my phone is just an expensive piece of plastic sitting on my desk and I can't go to sleep until I turn it back into a phone. I have a feeling work tomorrow is going to suck. ha should have waited until the weekend.
jc1337 said:
wait, so is your phone working now?
Click to expand...
Click to collapse
no it is not working
i can only get into download mode
i think i have a bootloader problem after flashing gt-i9100 rom
alsaqr said:
no it is not working
i can only get into download mode
i think i have a bootloader problem after flashing gt-i9100 rom
Click to expand...
Click to collapse
well I was never actually able to flash a rom or anything so I don't think we have the exact same problem. some of the same symptoms though.
Dude i was just Googling your error message. Its all over the internet. Doesn't look like a disaster. The only way you can truly **** up is by flashing something from the wrong phone.
Look around. Its out there.
Sent from my SGH-I777 using xda premium
Remove your battery. Hold power down for a while. Release. Keep battery out of phone. Hold both volume buttons (not power) and plug in usb. See of it enters download.
forum.xda-developers.com/showthread.php?t=1309293&page=5
Sent from my SGH-I777 using xda premium
33t said:
Dude i was just Googling your error message. Its all over the internet. Doesn't look like a disaster. The only way you can truly **** up is by flashing something from the wrong phone.
Look around. Its out there.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I know, I googled it for about 2 hours trying all sorts of different things and none of them are working. I'm still trying different stuff though. odin still recognizes my phone just nothing works when I try it.
33t said:
Remove your battery. Hold power down for a while. Release. Keep battery out of phone. Hold both volume buttons (not power) and plug in usb. See of it enters download.
forum.xda-developers.com/showthread.php?t=1309293&page=5
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
the phone just keeps going buzz....buzz....buzz but the screen doesn't ever come on and nothing happens when I leave the battery out.
PS. I also noticed earlier that the phone would stay on that screen where it asks about entering download mode until I would raise my fingers off the volume buttons and then it would go back to the screen that tells me to do the recovery with kies or w/e
Sorry no idea.... if you can't get to download with what I said a few times, then in lost.... there are a number of folks here who know way more than I do. I'm bowing out.
At the very least, check out the unbrick/return to stock thread in detail...
Sent from my SGH-I777 using xda premium
33t said:
Sorry no idea.... there are a number of folks here who know way more than I do. I'm bowing out.
At the very least, check out the unbrick/return to stock thread in detail.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I just tried that one, it failed also. uhhhhhh I guess at the very least I can use the tutorial to return the custom binary download count to 0 and just return it and get a new phone
I was thinking that too.
Sent from my SGH-I777 using xda premium
is it bad that my product name says "SGH-I727" isn't it supposed to say "SGH-I777"??

[Q] kernel flash without root

does anyone know how i can restore my phone? i flashed a voodoo kernel to it before rooting, and now its bricked. does anyone have the factory kernel laying around?
Thanks
What method did you try when putting the kernel on? Did you use Odin?
Sent from my SCH-I500 using XDA App
cschrauw said:
does anyone know how i can restore my phone? i flashed a voodoo kernel to it before rooting, and now its bricked. does anyone have the factory kernel laying around?
Thanks
Click to expand...
Click to collapse
look up my guide in general section...section 4
i looked at that, i also can only get into recovery mode, not download
droidstyle said:
look up my guide in general section...section 4
Click to expand...
Click to collapse
it's possible to access the sd card from the recovery menu, what should be on the sd card to fix it? the .md5 file?
cschrauw said:
i looked at that, i also can only get into recovery mode, not download
Click to expand...
Click to collapse
Try removing the battery completely, then hold down the down volume key and plug the USB cord in and don't let go until it's in download mode. Then replace the battery into the phone. This method has always worked for me. Hopefully it does for you too
Sent from my SCH-I500 using XDA App
kadin.zimmerman said:
Try removing the battery completely, then hold down the down volume key and plug the USB cord in and don't let go until it's in download mode. Then replace the battery into the phone. This method has always worked for me. Hopefully it does for you too
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
how long does it usuall take for you? i tried for about 5 mins and nada haha
Be sure you have drivers from Sanding installed on PC....also the USB cable is correct.. ( some charge phone just fine, but don't work for ODIN. ).... OH, " wiggle" cable...I know sounds odd but do it...I've. Had happen with mine
Sent from my SCH-I500 using XDA App
Lol dam auto correct! SAMSUNG NOT SANDING! !!!!!
Sent from my SCH-I500 using XDA App
cschrauw said:
how long does it usuall take for you? i tried for about 5 mins and nada haha
Click to expand...
Click to collapse
Usually takes 10 seconds lol yeah make sure the computer has Samsung drivers installed and try the OEM USB cord. Although I have used non OEM cords before and worked just fine... I'm very very surprised that taking the battery out, then holding the down key and plugging in simultaneous didn't work.
Sent from my SCH-I500 using XDA App
icemanwbs said:
Lol dam auto correct! SAMSUNG NOT SANDING! !!!!!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You do know there's an edit button on your posts right?

[Q] Bricked att Galaxy Note i717

I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
lampsoccer1409 said:
I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
Click to expand...
Click to collapse
buy an jig of ebay and pop it in...it should go to download mode....and flash stock firmware with odin and youll be back in no time....
even if I the computer wont recognixe it, it wont power on, go into recovery or download mode...
the jig will still work, what happens if it doesnt work?
More than likely the jig will work.....but if it doesn't its time to visit the store my friend.....but I'm sure the jig will do the trick
Sent from my GT-I9300 using xda premium
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
If Odin recognizes it you're good
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
make sure you have it charged, let it sit for a few hours...
try different usb
try different cable
try uninstalling drivers and reinstall ....see my page links for GNote for drivers
try another computer
. . . and pray.
If you try to boot your phone and you anykind of boot up logo or Samsung logo then your in good shape. Just look for the video on YouTube how to put phone in a download mode put the stock rom and root the phone again.
If I or anyone else have helped you in any kind of way please press THANK YOU button.
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
im buying the usb jig, and it wont boot at all...
if not i found a company that can fix the phone, thanks for all the help
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
Try flashing stock rom thru Odin even if it does not show it is recognized, some people have had luck doing that.
Sent from my Termi "NOTE" r
att galaxy note2 uclaj2 stock rom - odin
is there a link for an att galaxy note2 uclaj2 stock rom that can be flashed by odin ?
my note i717 says format disk when i connect to the computer
alewis2k12 said:
More than likely the jig will work.....but if it doesn't its time to visit the store my friend.....but I'm sure the jig will do the trick
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can i use a jig to get into download mode
sri.nafi said:
can i use a jig to get into download mode
Click to expand...
Click to collapse
You've revived 3 different threads that had been dead for over 5 months..
Please use google. All your questions are answered in the threads.
No need to bring up old ones back up
Here I'll help you out
WWW.Google.com
Use it
Sent from an ATM machine
armyboy11b said:
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
let us know what happens. pray
lampsoccer1409 said:
I rooted my phone and just tried reseting the binary counter for att and now it will not turn on or go in to download mode.
Any ideas how to unbrick it?
Click to expand...
Click to collapse
lampsoccer1409 said:
when i plug it in my computer, it doesnt recognize it but it still is coming up as some sort of a usb drive, is that good?
Click to expand...
Click to collapse
I'm confused , if it doesn't turn on, how does it come up as a USB when you connect it to a PC?
armyboy11b said:
Your fine..use a jig man you will be surprised .I wouldn't trip
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Unless I'm sorely mistaken,
We figured out about a day after it came out that they don't work. Do a search for the first month after the phone came out. March 2012
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Jamesyboy said:
Unless I'm sorely mistaken,
We figured out about a day after it came out that they don't work. Do a search for the first month after the phone came out. March 2012
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
Click to expand...
Click to collapse
They do work. They won't work on a hard bricked note though.
rquiett said:
They do work. They won't work on a hard bricked note though.
Click to expand...
Click to collapse
Buddy, I think you have the magic jig.
But I hear that's what all the girls say.

[Q] Bricked Vibrant?

So i was attempting to root this thing and put a fancy new rom on it, but have got lost along the way and now the phone will not boot into download or recovery modes. It just says Samsung Vibrant and stays there until I pull the battery. I am unable to do the key combos for any of the modes. The only way I could get into recovery was through adb command. But now I cant even do that. Any suggestions or should I just throw it in the can! Thanks
MikePysh said:
So i was attempting to root this thing and put a fancy new rom on it, but have got lost along the way and now the phone will not boot into download or recovery modes. It just says Samsung Vibrant and stays there until I pull the battery. I am unable to do the key combos for any of the modes. The only way I could get into recovery was through adb command. But now I cant even do that. Any suggestions or should I just throw it in the can! Thanks
Click to expand...
Click to collapse
you can use odin.. flash it back to stock.. just use search button.. I did it many times so it safe as long as you pay attention to instructions..
alkaid14 said:
you can use odin.. flash it back to stock.. just use search button.. I did it many times so it safe as long as you pay attention to instructions..
Click to expand...
Click to collapse
How can I get into odin without download mode? This is frustrating grrrrr!
MikePysh said:
How can I get into odin without download mode? This is frustrating grrrrr!
Click to expand...
Click to collapse
Does anyone think a dongle will do the trick to get it into download mode? I really need to get this working again! Thanks
MikePysh said:
Does anyone think a dongle will do the trick to get it into download mode? I really need to get this working again! Thanks
Click to expand...
Click to collapse
Yes a usb jig (dongle) should solve your problem but its not a guarantee. I would recommend buying one anyway, its a good thing to have around just in case things go wrong. They are only a few bucks so its worth it. You can also try using odin, I have heard of people flashing to stock without a download screen, if you see a yellow com box in odin then your good to go.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Yes a usb jig (dongle) should solve your problem but its not a guarantee. I would recommend buying one anyway, its a good thing to have around just in case things go wrong. They are only a few bucks so its worth it. You can also try using odin, I have heard of people flashing to stock without a download screen, if you see a yellow com box in odin then your good to go.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Okay thanks. I will get one if I have no sucess.
Anyway, I pulled the battery out for a few hours during hockey and then attempted to try download mode again only I got to a screen that has a bunch of code in red at the top of the screen with the robot underneath saying "Power reset or Upload mode.
What to do?
Thanks
MikePysh said:
How can I get into odin without download mode? This is frustrating grrrrr!
Click to expand...
Click to collapse
try this.. it works for me..
1- Open ODIN on your PC. (DO NOT PRESS/SELECT ANYTHING IN ODIN!)
2- Plug in the USB Cable to PC
(preferably the one that came with your phone *My N1 cable doesn't work??*)
3- Power down Phone if you had not already.
4- Remove the battery.
5- Plug USB into Phone.
6- Hold down BOTH volume buttons and while holding both, insert the battery.
7- Two to three seconds later your phone will be in Download Mode.
Be mindful to not remove connection while ODIN is running.
http://rootzwiki.com/topic/605-guide-root-odin-clean-metamorph-swype-tricks-ninja-apps-everything/page__p__11106#entry11106
MikePysh said:
Okay thanks. I will get one if I have no sucess.
Anyway, I pulled the battery out for a few hours during hockey and then attempted to try download mode again only I got to a screen that has a bunch of code in red at the top of the screen with the robot underneath saying "Power reset or Upload mode.
What to do?
Thanks
Click to expand...
Click to collapse
Yea I have seen that screen before, the dongle is going to be your fix most likely. Just wait for the usb jig if you ordered one, it should put you into download mode no problem. If for some reason the jig doesn't work then let us know.
Sent from my SGH-T959 using Tapatalk 2
I don't know if it will ever work again. I took it to a shop for a free estimate and he said it's pooped. Something frying something because he says all it does is turn on and say vibrant. Really? The sign said fix any phone. I'm waiting for the jig in the mail all the way from Chinese land. Maybe it will help, maybe it won't. I'll keep y'all posted:fingers-crossed:
MikePysh said:
I don't know if it will ever work again. I took it to a shop for a free estimate and he said it's pooped. Something frying something because he says all it does is turn on and say vibrant. Really? The sign said fix any phone. I'm waiting for the jig in the mail all the way from Chinese land. Maybe it will help, maybe it won't. I'll keep y'all posted:fingers-crossed:
Click to expand...
Click to collapse
Did you try the key layout that someone suggested. ThatALWAYS works for me
Sent from my SGH-T959 using xda app-developers app
skinzy98 said:
Did you try the key layout that someone suggested. ThatALWAYS works for me
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Thread layout?
The combination to get into download. Both buttons plus power while plugging in the usb. Or up plus power while plugging in the usb
Sent from my SGH-T959 using xda app-developers app
Jig seems to be a no go. Must be a paperweight now
MikePysh said:
Jig seems to be a no go. Must be a paperweight now
Click to expand...
Click to collapse
If the jigs a no go then I have no idea.
Sent from my GT-I9000 using xda app-developers app
There is Hope
MikePysh said:
Jig seems to be a no go. Must be a paperweight now
Click to expand...
Click to collapse
@MikePysh
I have been in this situation. I feel for you. This the mothergoosing EU bug.
Best bet (and this is how I did it) is to replace the motherboard (I know it sounds scary but it is NOT).
Here are the steps:
1. Buy a used/busted/for parts Vibrant (broken LCD, etc) or even a Galaxy S 4G SGH-T959v from eBay or wherever you can. Do not pay more than US $30-35 if it comes down to that. These two phones, i.e. your T-Mobile Vibrant SGH-T959 and the upgraded 4G version SGH-T959v have the same specs with the exception that the 4G radio is activated on the "v" version.
2. You can either fix it yourself (if you feel brave) or take it to a repair shop and maybe pay US 20-25 for labor to replace the motherboard.
It entirely depends on how badly you want to fix it without throwing it away.
Check out this: http://www.ifixit.com/Device/Samsung_Galaxy_S_Vibrant to get a feel if you can do it yourself.
Hope this helps.
Thanks fham! Sounds like a project I might attempt.
tomy1986.nt said:
unbrick service by jtag here.
http://www.ebay.com/itm/281082401835?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Click to expand...
Click to collapse
Thanks, but that site serves US only.
MikePysh said:
Thanks, but that site serves US only.
Click to expand...
Click to collapse
If your wanting your phone to be fixed by someone I recommend www.mobiletechvideos.com, very trusted source and they fix just about everything for the samsung vibrant t959.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
If your wanting your phone to be fixed by someone I recommend www.mobiletechvideos.com, very trusted source and they fix just about everything for the samsung vibrant t959.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Do you think it needs the JTAG Brick Repair?
MikePysh said:
Do you think it needs the JTAG Brick Repair?
Click to expand...
Click to collapse
Try to use Baywolf's Vibrant All in one. IT is really good. You could get into the download mode via the tool too.
Good luck.

Categories

Resources