I have searched this forum for help on my specific problem but can't find anything that will help...i rooted my husbands s3 (ics v 4.04) without any problems using odin, flashed successfully, installed busy box, all ok, then i installed font installer (root), tried changing the font, it said it had done it successfully and that it needed to reboot to finish installing, so i rebooted and now the phone won't go past the samsung logo with the blue led light on the top staying on and kind of going dull and bright.
i've tried resetting the phone and also clearing the cache but this doesn't help either, i've also tried to reflash the file with odin, it again says successful but it still won't go past the samsung logo.
if anyone can help please do as im unsure where to go from here, same thing happened when i tried to root my s2 but i was able to fix it with help and files from this forum
Now since you have already performed factory reset, is it possible to flash stock rom using PC odin again?
watsa said:
Now since you have already performed factory reset, is it possible to flash stock rom using PC odin again?
Click to expand...
Click to collapse
i could try if i had the files and instructions i wrote down all the relevant info before i started
Assuming that you have the international variant I9300 here it is http://forum.xda-developers.com/showthread.php?t=1646610
watsa said:
Assuming that you have the international variant I9300 here it is http://forum.xda-developers.com/showthread.php?t=1646610
Click to expand...
Click to collapse
thanks very much, by international does that mean sim free, it was bought it uk from ebay baseband i9300xxlg8
downloading it now once its (hopefully) flashed successfully can i then go ahead and reroot using the method i did this morning, but obviously NOT install the font installer lol
emma129 said:
thanks very much, by international does that mean sim free, it was bought it uk from ebay baseband i9300xxlg8
Click to expand...
Click to collapse
no not sim free, the usual one with micro sim in it. XXLG8 seems to be right and match the link I shared above.
can I advise using cf root
Most reliable method, installs all you need su/busybox/recovery
http://forum.xda-developers.com/showthread.php?t=1695238
[03.07.2012] CF-Root 6.4 - SuperSU+CWM5.5+CWMManager
Sent from my GT-I9300 using xda premium
thanks very much for your help, thats put it right appreciate all your help
I am having the exact same problem as OP. It's funny, I thought NO ONE would possibly have the exact same problem as me. Only difference is I am on AT&T's SGS3 and I also hit Reboot Now after installation. Looks like i soft bricked it at Samsung splash screen. Could someone PM me or reply with assistance. I can get into download mode. I cannot get into recovery mode to factory reset, clear cache, etc. Searched and searched many threads with countless questions and non specific to my problem.
Have You tried power on system in safe mode?
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
Hi guy please im experiencing the same issue ive flashed my s3 with two different stock roms but i still cant boot into recovery or get past the annoying Samsung logo...any help will be deeply appreciated
Related
Got the Galaxy S3 on the 3 network in the UK, all was fine & dandy then found out about how the phone was updated & basically 3 sit twiddling their thumbs on it. Went looking for a solution, found a nice simple flash the phone with Odin, use proper Samsung firmware, thought that will do the trick for me.
Unfortunately I did exactly as I was told (didn't go down the root, well, route as there were too many options and I was lost as to wether I was using the right stuff) People swore by the flash to samsung firmware, did that last night, was perfect. Only thing left was the change csc thing, to select BTU but the option wasnt there...was told to download another firmware.......the phone returned with a "unfortunately, the process android.acore has stopped" message, was told to to a reset.......then got "unfortunately, messaging has stopped". Have flashed a few times now to no avail, I can no longer text, is my phone basically broken beyond repair?
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Flash stock ROM and start again
Sent from my GT-I9300 using xda app-developers app
Or even factory reset .
But its a bad flash probably could be a corrupt download or wrong firmware .
jje
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
SilvFlashProd said:
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Click to expand...
Click to collapse
(s)he is having issues just fixing a stock rom misflash and you recommend a custom ROM? Even root was too complicated
I've flashed past phones to death and even still following instructions exactly, they don't always work as they should. Yeah they have cool features and yeah me or you can probably manage to fix any issues they throw up, but they are definitely not for everyone.
Sent from my GT-I9300 using xda app-developers app
bkr32 said:
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
Click to expand...
Click to collapse
Bull****...his problems have nothing to do with a brick. Don't scare him.
i'd defo try a factory, cache and dalvik reset first before flashing again, you'l loose all your data but it may fix the problems you are experiencing.. Boot into recovery mode to do that.
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong? I tried following the rooting stuff but found so many variations & in my head (technology challenged when it comes to this) it was all going over my head. I did do the factory reset & reflash with a stock software (the latest I believe) but I don't know if it is a network thing which knackerec me, in CSC I have sales code saying H3G with no options to select BTU. If I post a screenshot of my settings (about device) would that help someone steer me in the right direction as a possible starting point.
My phone appears to be no longer 3 branded, but it should be locked to the 3 network in the uk.
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
JJEgan said:
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
The link for the stock you posted is what I used....didn't root as I said, but appeared to work perfectly. Then I lost access to kies & was told I needed to use csc to tick the BTU option & that would work, except I didnt & still don't have that option. Was given another link to apparently the same stock that had "multi csc options" & that when I got the Samsung acore error & I did a factory reset after about 30 minutes of trying to get into the options, then the messaging stopped working & I found out how to do te factory reset using te vol button home power thing. Is there a specific 3 firmware where I can get my phone branded again & take it from there?
Click to expand...
Click to collapse
djstevie said:
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
Click to expand...
Click to collapse
If I try this, what Rom did you use, was it the one in link after you?
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
JJEgan said:
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
Click to expand...
Click to collapse
I am happy flashing on release, please understand this is all new. If losing kies is not an issue coz I can just flash then cool. I thought kies was an essential part of the updating. I can use my phone fine just now (using go SMS Pro) but would like it back to fully working phone which would be sweet.
Nothing good is wrong with your phone. It's not even a brick yet. Flash a cwm recovery and then re trying using check rom.
Sent from my GT-I9300 using Tapatalk 2
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
avocco said:
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
bonzai1888 said:
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
Click to expand...
Click to collapse
I'm on 3 UK same happened to me when I unbranded. Don't panic your phone is fine. Turn off phone then hold power + home + volume up. Let go when you see the Android man. Wipe factory reset and dalvik cache you will lose everything. Then reboot. Don't bother letting it boot back up, just hold power + home + volume down. Then flash unbranded rom via odin. Once done and booted type *#272*yourimei# and you should now have option of btu.
Sent from my GT-I9300 using xda premium
bonzai1888 said:
If I try this, what Rom did you use, was it the one in link after you?
Click to expand...
Click to collapse
Was the latest UK unbranded rom in the first page.
So my S3 went into a boot loop. And I dont know how I got to this point but now the phone wont even boot, when plugged in to my comp it shows the battery symbol but its greyed out with the circle in the middle, and it stays like that. If i hold the power putton it comes up with the Galaxy SIII GT i9300 screen but then goes back to the battery. I can get it to go into download mode though. I think somehow I may have deleted all the files required for the phone to actually boot(Im a n00b so im not completely sure) Can somebody please help me?
I was on custom ROM before and my binary counter is at 4, so sending into samsung doesn't sound like a great idea :/
Thanks for the help and sorry if this has been asked before, I have searched for hours.
Luke2508 said:
So my S3 went into a boot loop. And I dont know how I got to this point but now the phone wont even boot, when plugged in to my comp it shows the battery symbol but its greyed out with the circle in the middle, and it stays like that. If i hold the power putton it comes up with the Galaxy SIII GT i9300 screen but then goes back to the battery. I can get it to go into download mode though. I think somehow I may have deleted all the files required for the phone to actually boot(Im a n00b so im not completely sure) Can somebody please help me?
I was on custom ROM before and my binary counter is at 4, so sending into samsung doesn't sound like a great idea :/
Thanks for the help and sorry if this has been asked before, I have searched for hours.
Click to expand...
Click to collapse
If you also can go into recovery, try to wipe. In addition did you flash any custom kernel?
If not, try to reflash a rom with odin after you got into download mode or did you try this already?
Sent from my GT-I9300 using xda app-developers app
chrismast said:
If you also can go into recovery, try to wipe. In addition did you flash any custom kernel?
If not, try to reflash a rom with odin after you got into download mode or did you try this already?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you mean with CWM mod, no I cant, it just shows the Galaxy S3 GT i9300 screen then goes black. Yes i did have a custom kernel, I believe it was the latest Perseus one. I already tried this with a stock rom and it idnt work, it said it had passed but i still can boot the phone.
Luke2508 said:
If you mean with CWM mod, no I cant, it just shows the Galaxy S3 GT i9300 screen then goes black. Yes i did have a custom kernel, I believe it was the latest Perseus one. I already tried this with a stock rom and it idnt work, it said it had passed but i still can boot the phone.
Click to expand...
Click to collapse
as you can go into download mode but not recovery, what about flashing CWM another time (if you did not try it already). Maybe it solves the issue with recovery and from there you could go on trying to wipe etc.
Other options would be to do a mega or super wipe (if this is possible from odin & download mode, not sure though), to get your phone completely empty (mega) or at least to factory reset (super).
Luke2508 said:
So my S3 went into a boot loop. And I dont know how I got to this point but now the phone wont even boot, when plugged in to my comp it shows the battery symbol but its greyed out with the circle in the middle, and it stays like that. If i hold the power putton it comes up with the Galaxy SIII GT i9300 screen but then goes back to the battery. I can get it to go into download mode though. I think somehow I may have deleted all the files required for the phone to actually boot(Im a n00b so im not completely sure) Can somebody please help me?
I was on custom ROM before and my binary counter is at 4, so sending into samsung doesn't sound like a great idea :/
Thanks for the help and sorry if this has been asked before, I have searched for hours.
Click to expand...
Click to collapse
Look at the tread above yours,sudden death.
You are not the only one here mate.
I have it too.
Mods,can we have one tread for this huge problem.
It seems that there are many of us have this problem.
Thanks.
painterceessie said:
Look at the tread above yours,sudden death.
You are not the only one here mate.
I have it too.
Mods,can we have one tread for this huge problem.
Pointless having another thread why not post /read the original thread for this problem .
a hint look for sudden death thread
jje
Click to expand...
Click to collapse
chrismast said:
as you can go into download mode but not recovery, what about flashing CWM another time (if you did not try it already). Maybe it solves the issue with recovery and from there you could go on trying to wipe etc.
Other options would be to do a mega or super wipe (if this is possible from odin & download mode, not sure though), to get your phone completely empty (mega) or at least to factory reset (super).
Click to expand...
Click to collapse
I successfully flashed CF root with CWM, now shall I do a wipe and then restore back to a nandroid backup I made? and if so how will I? The phone now shows the samsung logo when turned on but just stays there forever.
JJEgan said:
painterceessie said:
Look at the tread above yours,sudden death.
You are not the only one here mate.
I have it too.
Mods,can we have one tread for this huge problem.
Pointless having another thread why not post /read the original thread for this problem .
a hint look for sudden death thread
jje
Click to expand...
Click to collapse
Oke sorry mate.
I didn't no that.
Click to expand...
Click to collapse
Furthermore i suggest anyone having motherboard dead problems and vendor Samsung saying no warranty .
To pull up the many posts regarding this now known manufacturing defect and don't accept in this case root/ custom rom warranty is rejected .
jje
JJEgan said:
Furthermore i suggest anyone having motherboard dead problems and vendor Samsung saying no warranty .
To pull up the many posts regarding this now known manufacturing defect and don't accept in this case root/ custom rom warranty is rejected .
jje
Click to expand...
Click to collapse
The thing is there is nothing wrong with my phone in terms of hardware. The problem that I am having is purely software, I think I just need to restore my phone to a previous version. I did see that thread but didnt feel my post belonged there as my problem is nothing to do with broken battery or mobo or anything along those lines. Hence why I am posting here
Just factory reset via recovery then flash a stock rom via Odin .
No recovery flash CF root via Odin .
jje
JJEgan said:
Just factory reset via recovery then flash a stock rom via Odin .
No recovery flash CF root via Odin .
jje
Click to expand...
Click to collapse
I did install a stock ROM and it was still stuck on bootloop, left it like that for an hour, still nothing. So I went into CWM (after flashing it) Wiped and factory reset (noticing it said error mounting /data but ignored) and then restored with a backup I had. it did say error mounting /data and so skipped that step. Still stuck in boot loop. now that I try wiping again the same error occurs, error mounting /data any ideas please?
I did have this problem a few days back. The only thing i did was downloaded my Carrier stock firmwaer and extracted boot.img and used Samsung galaxy toolkit and make a filé that i was able to use with Odin. Dunno if ot helps you but my Phone is still going strong
I was only trying to root my Phone tho. No custom rom installera when i got The boot problem
Sounds like you have permission problem. I can't find the three about that but I update my post here if I can find it.
you can try to fix permission in cwm it seems, hope it works
Sent from my GT-I9300 using xda app-developers app
xda-napp3 said:
I did have this problem a few days back. The only thing i did was downloaded my Carrier stock firmwaer and extracted boot.img and used Samsung galaxy toolkit and make a filé that i was able to use with Odin. Dunno if ot helps you but my Phone is still going strong
I was only trying to root my Phone tho. No custom rom installera when i got The boot problem
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks, do you have any idea where I will find my carrier specific firmware? And any other kind of tips on how to do/get things? But hopefully this works
Checkout this thread hope you find what you need there
http://forum.xda-developers.com/showthread.php?t=1927113
Sent from my GT-I9300 using xda app-developers app
Hello, guys, well im new here, and first time ive tried to root android, i was using a simple guide, downloaded rom file and odin, then ive installed the rom, everything went well, the phone rebooted and it just "sings" its on song and no visual, what to do? ive tried to install different rom, same stuff..
try a full wipe through recovery.
double time volume down+home+power?
volume uo+home+power
it didnt helped, just wiped everything for nothing... what now?
linuxas said:
it didnt helped, just wiped everything for nothing... what now?
Click to expand...
Click to collapse
Same issue here. International 9300 from singapore.
linuxas - are you using a GTI9300?
What ROMs are you trying to flash?
ure correct, well i dont really now what i was trying to use, im new as i said, i can say what it calls on the .tar file
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
CF-Root-SGS3-v6.0
linuxas said:
ure correct, well i dont really now what i was trying to use, im new as i said, i can say what it calls on the .tar file
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
CF-Root-SGS3-v6.0
Click to expand...
Click to collapse
But you can get into CWM recovery ok?
If so, download a rom from the development forum and flash that through CWM.
sorry for asking stupid questions, but cwm is that volume up+home+power button? what rom should i download now?
linuxas said:
sorry for asking stupid questions, but cwm is that volume up+home+power button? what rom should i download now?
Click to expand...
Click to collapse
Try reflashing the original rom through ODIN first, probably best..
which should i download if im from lithuania?
try http://www.hotfile.com/dl/177306141/248b29e/I9300XXDLJ4_I9300OXADLJ4_BTU.zip.html
its unbranded and the latest uk one but should have your language.
thanks, hope that will work (no more rooting for me ) but will the region codes will be alright?
Yes, you can check after you've started the phone - use CSC Selector from the Play Store.
alright, well ill let u know how im doing when the download completes...
I've had the same thing happen to me too, although my phone won't switch on , it gets tot he galaxy s III white screen and then just stops on a black screen, makes a noise and thats it, just stays black with the blue charging light on.
I can connect it to the computer and it is rooted with CWM installed.
Would love to save the data if poss but i'm guessing that i may have to wipe it.
can you get into download mode?
if so, just flash the stock rom through ODIN as above.
For root and unroot, complete step by step guidance check this site by an XDA member zedomax
www.galaxys3root.com
I found it beneficial when I root my galxy 1st time
Sent from my GT-I9300 using Tapatalk 2
dladz, its the same problem for me, but it helped, unfortunatly ive lost everythink...
Hi,
I'm starting this thread because I can't seem to find anyone on here/the whole internet that seems to have had a similar problem.
I've got a UK unlocked Samsung Galaxy S3 GT I9300 in pebble blue 16GB. I bought it pretty much when it came out and was pretty happy with it. I updated it to JellyBean 4.1.1 via KIES last year when it came out (October/November?) and again was pretty happy with it.
Unfortunately despite being super OCD over my devices I managed to crack the screen. I sent it off to a Samsung repair centre and they changed the screen out for a hefty price. Phone came back and it hadn't been wiped or factory reset etc.
Then in December last year, I think it was the 12th, I got the Sudden Death. Phone was close to full charge in pocket for a few hours, took it out to make a call, wouldn't turn on. So I took it into the shop and they sent it away to be fixed. Got it back about 10 days later, working, factory reset to 4.1.1.
So when I got it back I noticed that 4.1.2 I9300XXELL4 firmware was out. I downloaded that and Odin and flashed the BTU firmware for unbranded UK devices. All seemed to go totally fine, phone has been working ok since.
Once small problem I have had since as long as I can remember is that in about phone, under status, the device status changes from normal to modified all the time. It turns out this has something to do with my 64GB EXFAT micro SD Card though. I found a few people with similar problems and thought nothing more of it.
Now however, I've noticed the 4.1.2 firmware with the exynos abuse fix and MAYBE sudden death fix was out, so I'm pretty interested in flashing it. Anyway I came to flash it and thought I'd check to make my custom binary count etc was as it should be. Turns out its not! I've got custom binary download YES (2 counts). Current Binary SAMSUNG OFFICIAL and System Status OFFICIAL. So I'm just a bit perplexed as to how this has happened? Can this happen without rooting and just flashing stock firmware? Or has it been modified/rooted when its been aware for repair to Samsung? I'm just a little bit perplexed/annoyed that I've made sure I've always kept it stock so that its protected by the warranty etc as I've been an early adopter and have to keep it for 2 years. Yet here I am without any of the benefits of rooting yet I've technically voided my warranty and haven't actually done anything?
So just hoping for some thoughts on what could have caused this? Also, is my only option to remove this to ironically root, triangle away, stock flash/factory reset/unroot? I would like to flash this new I9300XXELLA firmware if its got potential fixes but I don't want to add to that binary counter if flashing through Odin unrooted is going to do this. Obviously KIES won't do it anymore as it thinks it's modified.
Hope you guys can help, any thoughts are appreciated!
Many thanks in advance.
UPDATE - Have just flashed using Odin the I9300XXELLA firmware found here: http://forum.xda-developers.com/showthread.php?t=1646610 Phones working fine and it hasn't added to the custom binary download counter. Still shows: YES (2 Counts)
ELLA is really smoother than rest of firmwares. If i was you i would.
1. Root with Cf root
2. Run triangleaway
3. Go into download mode and check if its official binary stock sammy 0 counts.
4. Remove battery.
5. Download odin 1.85
6. Downlload xxella
7. Flash xxella as PDA.
8 .wipe data in stock recovery
Sent from my GT-I9300 using xda app-developers app
Adams756 said:
Hi,
I'm starting this thread because I can't seem to find anyone on here/the whole internet that seems to have had a similar problem.
Multiple posts on this if you looked on the forum .
jje
Click to expand...
Click to collapse
JJEgan said:
Adams756 said:
Hi,
I'm starting this thread because I can't seem to find anyone on here/the whole internet that seems to have had a similar problem.
Multiple posts on this if you looked on the forum .
jje
Click to expand...
Click to collapse
Could you link me to them? I really couldn't find them for the i9300 that's never been rooted.
Endrit9, thanks I think that's my best bet. I've flashed ELLA already, can I still root with CFroot?
Click to expand...
Click to collapse
Yes it should work then run triangleaway check download mode. Flash lla wipe data good luck but if u bought the phone and live in europe theres nothing to worry about.
Sent from my GT-I9300 using xda app-developers app
The 4.1.2 firmware you flashed via Odin is not officially signed by samsung( this is what i read I'm not 100% sure) This causes your counter to increase.
endrit9 said:
Yes it should work then run triangleaway check download mode. Flash lla wipe data good luck but if u bought the phone and live in europe theres nothing to worry about.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks I'll check out the root threads and give it a go. I live in UK, I bought the phone on a contract here but it's unbranded, I just got an O2 sim with it. Will this still be valid for warranty?
Thanks unitnerd. I didn't realise it might not be signed. Although thinking about it now I imagine it's probably because they're compiled by someone else after it comes out of KIES.
https://fsfe.org/freesoftware/legal/flashingdevices.en.html
Read ↑
Cf root is good by chainfire
Sent from my GT-I9300 using xda app-developers app
same problem its so confusing
Hi everyone,
I gave it a shot at rooting my phone and upgrading it from android 4.0.3 to 4.2.1 (rootbox) but I failed miserably. Somewhere in between the phone got stuck at that warning yellow marker and it would only allow me to get into download mode. After trying 5-6 different firmware versions, I finally managed to get one of them to work with Odin and the phone works once again but this firmware version does not work with kies.
I have no idea what the original version was, but I can get all the details from an identical phone from the same operator if you tell me what would be needed. I know it is a silly question, but is there a way to download the firmware from another identical phone used by the same operator?
I want to either restore the phone to a firmware version of local Swiss operator or properly manage to upgrade the firmware to a light version of android so I won't have to deal anymore with all those useless default apps which start automatically and eat up the battery.
I welcome any and all advices.
Thanks in advance.
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
You can download stock from
http://www.sammobile.com/firmwares/ just search for your phone and carrier then flash back to stock.
As the previous post said did you wipe first? Try a factory reset then flash the rom.
Sent from my GT-I9100 using xda app-developers app
danskiro said:
did you do a full wipe?
my SII is runnning on SlimBean 4.2.2.
just try it
the latest firmware for you S2 you will find at sammobile->firmwares->check your firmware
Click to expand...
Click to collapse
Thanks a lot for the help. With this new firmware on I finally managed to install RootBox 3.8 with Android 4.2.2.
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
gn82 said:
It would be great if I someone would lend a hand in fixing the following 2 small, but quite annoying issues:
1. finding a way to remove 3 of the 5 home screens - I just don't need them and its annoying.
2. finding a way to disable the vibrations that happen whenever I use the on-screen keyboard to write anything
Click to expand...
Click to collapse
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
WardenBerret said:
1. If you are on TwLauncher (original one) put two of your fingers on opposite corners or homescreen and then move both fingers to middle. Then you'll see all homescreens and just long press one and a dustbin will appear. Put the homescreens on it
2. Settings > sound > there it will be an option to have you vibrate while pressing and you can uncheck it.
This is very basic stuff, you should explore everything on your phone before asking questions. Keep in mind for next time.
Till then, cheers.
Click to expand...
Click to collapse
Thanks for the feedback. Be it basic or not, it simply does not work. I used the basic Rootbox as described in this thread.
1. No matter how much I move my fingers on the screen no menu appears
2. System settings >> Sound >> "vibrate on touch" is disabled yet the phone vibrates when I type on the screen keyboard which is really annoying to others if I am in a meeting ... I googled for about 6 hours for a solution and when I failed to find one I posted here. I am sure that the time of everyone here is quite precious I would never want to waste it.
Flash stock jb with mobile odin and that's that.
Sent from the little guy
gastonw said:
Flash stock jb with mobile odin and that's that.
Sent from the little guy
Click to expand...
Click to collapse
Thanks a lot gastonw. I am now cMIUI which should be based on CM10 and even though it is based on Android 4.1.2 instead of 4.2.2 it is still running great.
Good news then
Sent from the little guy
Stuck at samsung logo
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
algorithm101 said:
Stuck at samsung logo
running on siyah kernel v6.5b on Samsung galaxy s2 jb 4.1.2
tried to install alliance mod rom v8 and ended up at Samsung logo
tried factory reset and also the wipe cache partition dint work erased the dalvik cache too plus tried factory reset and install a fresh stock rom the odin just gets hung and task manager marks it as not responding.what do i do now??
I have access to root..
Have i Bricked this phone??
Click to expand...
Click to collapse
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
now trying to install a stock rom
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
algorithm101 said:
I Can access recovery.. i did all the formatting of caches, i'm trying to install a stock rom now.. what i'm doing is correct or wrong please suggest..
Click to expand...
Click to collapse
If you're attempting to flash a stock ROM through CWM recovery, stop now. That'll never work. The only way to flash a stock ROM is to use Odin, Mobile Odin (which in your case won't work, requires phone to boot) or Heimdall (I've never used this personally). So if you're using recovery, DON'T flash stock. You have two options to flash a ROM at present:
1) Stock ROM using Odin
2) Custom ROM using CWM recovery.
Done and working Thanks a Lot
Hopper8 said:
If you can get to the samsung boot logo, then no. Can you access recovery? Or just download mode? If you can access recovery, then factory reset>clear cache>clear dalvik cache and flash one of the firmwares you'd have on your sd card, assuming that you used CWM to flash a zip in the first place (you said that you had cMIUI and rootbox working, go back to one of those.) If you can't get into recovery, then try download mode. You need to keep trying to flash with Odin if you can only access download mode. There's a set of troubleshooting steps to follow if you get another bad Odin flash. Search through my posts for them, I posted them a week back or so.
Click to expand...
Click to collapse
I flashed into stock rom XXLSJ variant. phone is working fine but lost access to root. in order to regain recovery menu i rooted my phone.
1. Now i want to backup my ROM using titanium backup. But its stuck at Gaining Root Access Screen What do i do now?
2. Stweaks,Super User and CWM have disappeared how do i get it back??
3. Strange thing Whatsapp is not working Unable to connect using my datapack
4. Can i Software update irrespective of the JB Stock ROMs region I am from.
Good job getting it working again now, time for you to do some reading. Read about what flashing a custom kernel will do for you. Then pick one that's compatible with your firmware and flash it.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Stuck on boot logo
Hi i just flashed the stock firmware acquired from this link:
http://www.sammobile.com/firmwares/3/?download=12748
I got all green in Odin v1.85 but it is stuck on the boot logo
I have rooted/flashed my phone many times so I'm quite confused.
Help much appreciated!!
Wipe data/factory reset?
-------------------------------------------
maybe your an iphone expert
------------------------------------------
Which is the main stock firmware for the i9100?
Hi I am using a vodafone UK branded i9100 firmware and recently decided to cancel my contract. I would like to flash to a stock JB but im not sure which is the right one to download.
I checked the firmware on sammobile but still unsure. Please see attached file.
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
gastonw said:
Wanna flash vodafone uk or any other ROM?
(Retoric)
Sent from...this is not even my S2
Click to expand...
Click to collapse
Can you flash any s2 stock rom? I see there is difference in the modem code for different countries...
I have
PDA: I9100XWLSH
CSC: I9100OPSLSB
MODEM: I9100XXLS9
So i belive only this ver of stock rom can be flashed???