Related
My fiance and I both got thunderbolts a few months ago. My phone keeps losing the network connection. The 3G icon completely disappears from the status bar but the signal bars remain and have a few bars of signal. If I try to do anything when the phone is like this I get a no network connection error. Mine does this about every 10 minutes for about 5 seconds. i can have my phone laying right beside hers on the table and hers holds solid 3G and mine doesnt.
I have called verizon tech support 2 times about this and the second time they want to open a trouble ticket because they think its an issue with the network. I think I have a bad phone and would just like them to replace it. Anyone else seen this happen and can shed some light on it?
What kind of battery cover do you have? Only reason I ask is that the actual antenna for 3g/4g is on the battery cover itself.
You could get a signal boost if you put aluminum foil in your battery cover, not covering the camera holes of course. The 2 gold connections on the top of your phone in the back are the connectors for the antenna on the back cover. So by putting aluminum foil on the cover you are basically extending the antenna or if you put aluminum on the gold it might bridge a small gap that is preventing conductivity between the antenna and the contacts.
Hope this helps!
Check all these things:
http://forum.xda-developers.com/showthread.php?t=1145147
greenjeans said:
Check all these things:
http://forum.xda-developers.com/showthread.php?t=1145147
Click to expand...
Click to collapse
Thanks for the link, but I already checked that stuff. I'm really thinking I have a faulty device. My battery cover is the stock one and is on the phone tightly, and I even swapped my battery cover with my fiances. I even tried slightly bending the antenna contacts up so they make better contact and still have the same problem. The last thing I can think of is that I could have a bad sim card. 4G works fine when I'm in a 4G area though. I don't get why verizon thinks it is my line.
I've heard of one other person whos line is bad no matter what phone they use and that's slayers (CM7) wife.
Sent from my ThunderBolt using XDA Premium App
sabbotage said:
Thanks for the link, but I already checked that stuff. I'm really thinking I have a faulty device. My battery cover is the stock one and is on the phone tightly, and I even swapped my battery cover with my fiances. I even tried slightly bending the antenna contacts up so they make better contact and still have the same problem. The last thing I can think of is that I could have a bad sim card. 4G works fine when I'm in a 4G area though. I don't get why verizon thinks it is my line.
Click to expand...
Click to collapse
First the bars are for voice so you can lose 3g and still have cell service. 2nd have you tried the app LTE onoff? If you put it on the option for cdma auto prl it should bring the signal in. If that doesn't help I would take it to Verizon.
Thunderbolt powered by Bamf effen 3.0
ddgarcia05 said:
I've heard of one other person whos line is bad no matter what phone they use and that's slayers (CM7) wife.
Sent from my ThunderBolt using XDA Premium App
Click to expand...
Click to collapse
Yeah I saw her rants on twitter about it. Mine isn't nearly that bad though.
gsxraddict said:
First the bars are for voice so you can lose 3g and still have cell service. 2nd have you tried the app LTE onoff? If you put it on the option for cdma auto prl it should bring the signal in. If that doesn't help I would take it to Verizon.
Thunderbolt powered by Bamf effen 3.0
Click to expand...
Click to collapse
I lose 3G and 1X both. I can't call or get data when this happens. I still have bars but the 3G/1X icons are non-existent on the status bar. And yeah I have the radio tools option in my wireless settings menu and I have toggled back and forth with no change. My phone is rooted and I've tried several radio combos and also many different roms with the same problem. I have even RUU'd the phone back to 100% stock with the same problem.
I'm almost tempted to go back to my incredible to see if it happens on it. I never had this issue until I got the thunderbolt.
I am on vacation this week and my 3g disappeared in the middle of a hotspot session yesterday. I spent all afternoon flashing, clearing, etc, and my ultimate solution is the one below from android central. I am certain this is a Vzw doing something to the towers in the area as my Xoom, my wife's iPhone, and her iPad2 all kept 3g the entire time.
This should be added to OP.
If the link fails Google "Thunderbolt 3g problems". It will be the first result.
http://www.androidcentral.com/having-3g-problems-your-thunderbolt-fix-just-few-settings-away
Sent from my ADR6400L using Tapatalk
Here is the entire article to give proper credit.
QUOTED FROM ANDROID CENTRAL:
"We'd hoped to give Verizon's network a couple more days to settle before breaking this one on you, but these are drastic times, folks. See, more than a few of you have had issues with getting 3G data on the HTC ThunderBolt when you're in a non-4G area. Nope, doesn't make much sense. But landle in the Android Central Forums has done a nice job explaining how the TB uses the eHPRD 3G network to speed the handoff between 3G and 4G data. Problem is, it ain't working for a lot of people. Good news is there's a fix --no hard resets (which until now had been the recommended fix), human sacrifice or other unpleasantness. Here's what you need to do:
Go to the ThunderBolt's phone dialer. Enter ##778# and hit Send.
You'll get a pop-up labeled EPST, with the choice to "View Mode" or "Edit Mode." You want "Edit Mode."
You'll be asked for a password. It's 000000.
Now flip down to "Modem Settings," and then choose "Rev. A." Change the setting from eHRPD to "Enable," hit OK, then press the Menu button on the phone and tap "Commit Modifications." That's it. You're done.
The phone will reboot (don't worry, you're not losing any data here), and things should, you know, actually work. As landale points out, you'll want to change this setting back once Verizon gets its network sorted out. But in the meantime, enjoy your, erm, new 3G! [Android Central Forums] Thanks, landale!"
Dante_l1 said:
Here is the entire article to give proper credit.
QUOTED FROM ANDROID CENTRAL:
"We'd hoped to give Verizon's network a couple more days to settle before breaking this one on you, but these are drastic times, folks. See, more than a few of you have had issues with getting 3G data on the HTC ThunderBolt when you're in a non-4G area. Nope, doesn't make much sense. But landle in the Android Central Forums has done a nice job explaining how the TB uses the eHPRD 3G network to speed the handoff between 3G and 4G data. Problem is, it ain't working for a lot of people. Good news is there's a fix --no hard resets (which until now had been the recommended fix), human sacrifice or other unpleasantness. Here's what you need to do:
Go to the ThunderBolt's phone dialer. Enter ##778# and hit Send.
You'll get a pop-up labeled EPST, with the choice to "View Mode" or "Edit Mode." You want "Edit Mode."
You'll be asked for a password. It's 000000.
Now flip down to "Modem Settings," and then choose "Rev. A." Change the setting from eHRPD to "Enable," hit OK, then press the Menu button on the phone and tap "Commit Modifications." That's it. You're done.
The phone will reboot (don't worry, you're not losing any data here), and things should, you know, actually work. As landale points out, you'll want to change this setting back once Verizon gets its network sorted out. But in the meantime, enjoy your, erm, new 3G! [Android Central Forums] Thanks, landale!"
Click to expand...
Click to collapse
Thanks. I saw this article before, but if I do this my phone won't switch to 4G when I go into a 4G area right?
I still don't get why my phone does this an my fiances doesn't. It is 99% likely that we are on the same tower too.
EDIT: Just tried the fix from the article posted above and still having the same problem.
I am sorry to have gotten your hopes up. I should have read closer, I took it that you both had the issue. Plain as day on a reread though.
Had it worked I think your 4G would have been busted.
I added some more details to my issue when I reposted in another thread. Next time you lose 3g try checking for software updates to see if it pulls the 3g back on.
Sent from my ADR6400L using Tapatalk
Is the *228 radio update method still valid for the Tbolt? I'm assuming if you were on the phone with Verizon they would have had you do that if it is. But just throwing this out there in case we are just overlooking the obvious.
Also added my question to the post here: http://forum.xda-developers.com/showthread.php?p=15256013#post15256013
@sabbotage
If you are on stock rom & radio, then you either have a bad sim card or a defective phone. Go to verizon & swap sim cards. If you still have problems, exchange the phone.
Sent from my ADR6400L using XDA App
Jiggity Janx said:
Is the *228 radio update method still valid for the Tbolt? I'm assuming if you were on the phone with Verizon they would have had you do that if it is. But just throwing this out there in case we are just overlooking the obvious.
Also added my question to the post here: http://forum.xda-developers.com/showthread.php?p=15256013#post15256013
Click to expand...
Click to collapse
nope it isn't, Verizon pushed a new PRL to my phone because I was having 4G issues (that was their solution?). didn't fix anything. and my 3G icon disappears once a day for a few seconds.
Hi, I'm on sprint with my evo 3d and I'm stuck with only 1X. I have read the posts about the bad PRLs and I have set mine back to 21081 with no luck. I read here cricketusers.com/sprint-htc-evo-4g/9588-evo-only-doing-1xrtt-no-3g-evdo-any-ideas.html that " I took a backup using QPST of my old EVO, and loaded that on to the new one, and I'm getting pings under 100, downs around 1000 kbps, ups around 500 kbps."
Anyone have any suggestions? Thank you.
get msl# type ##3282# type in your msl as your password click on edit mode click data profile hit menu and restore. then reboot. when it reboots let it do the hands free set up but cancel the prl update and firmware update. hit thanks it helps. that is what I did and it worked
hey shawnten, thanks for the reply. I have already tried that many times, but I will do it again right now and hope it helps. I actually haven't done that since I changed the prl, so I'll hope for the best. any further advice would be appreciated.
I would also like to mention that I keep getting error 67, unable to establish wireless data connection. doing hands free activation now taking forever
Still on 1x. Could someone share a qpst backup of their phone to me? Perhaps that will fix the problem like in the original post
i have the same problem any help is appreciated
This worked for me. Thanks
Seems like the 21081 prl is screwing up no, because I had the same problem earlier today. I switched to the 11115 prl and I have my 3g back but now its stuck on roaming
Turning GPS off is important!!
"FIRST, make sure you are using the stock dialer and not a third-party one as the menus will not work (as I discovered the hard way... ) Then...
Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL."
Compliments of CarrieK.
Tried 3 or 4 prls, followed all the steps and still 1X I believe the 4g works but I'm not in a 4g area anymore so I can't check. Anyone else...?
Try ##3282#,edit,enter msl,EVDO,preferred mode- Automatic,menu, commit modifications,ok. See if that helps.
codd said:
Hi, I'm on sprint with my evo 3d and I'm stuck with only 1X. I have read the posts about the bad PRLs and I have set mine back to 21081 with no luck. I read here cricketusers.com/sprint-htc-evo-4g/9588-evo-only-doing-1xrtt-no-3g-evdo-any-ideas.html that " I took a backup using QPST of my old EVO, and loaded that on to the new one, and I'm getting pings under 100, downs around 1000 kbps, ups around 500 kbps."
Anyone have any suggestions? Thank you.
Click to expand...
Click to collapse
You're getting those download speeds on 1x!?
THEGAMEPLAY94 said:
You're getting those download speeds on 1x!?
Click to expand...
Click to collapse
Did you even read my post!?
I have factory reset my phone like 7 times and done all of this and still on 1x.. I know 3g works fine on my evo 4g cause I'm using it now. Dunno what the problem is... the settings on my phone are fine.. can someone post a QPST backup of theirs?
This happened to me before too. What I did was turn off the gps. Update the profile. Update the prl. Then goto the dialer and do the ##DATA#. EDIT. Enter MSL. DATA PROFILE. then MENU key RESTORE. It will confirm then restart if it doesn't restart then POWER MENU. RESTART. Wait for the Hands Free Activation to come up after the restart. Let it activate then CANCEL THE PRL UPDATE AND THE FIRMWARE UPDATE...
Hope this works for you. I've gotten stuck at 1x about 3+ times and this always worked for me.
Sent from my PG86100 using Tapatalk
EDIT: Seeing your previous post about those download speeds makes me think your 3g is working fine. Get the app Network Signal Info and see if that tells you your on 1x.
Why is it that nobody can read my posts? Those are not MY speeds. I have netmonitor and I know I'm on 1xrtt. My d/l speed is about 30 kb/s. I'll try doing what you posted again but I have done it at least 12 times.
another thing you can try which is one step different but may help is doing the data profile restore and and let it do the profile update then follow thw rest of the steps. that's the only thing i can think of other than it being something on sprints end, they may have to reset something.
YoMaMa7467 said:
This happened to me before too. What I did was turn off the gps. Update the profile. Update the prl. Then goto the dialer and do the ##DATA#. EDIT. Enter MSL. DATA PROFILE. then MENU key RESTORE. It will confirm then restart if it doesn't restart then POWER MENU. RESTART. Wait for the Hands Free Activation to come up after the restart. Let it activate then CANCEL THE PRL UPDATE AND THE FIRMWARE UPDATE...
Hope this works for you. I've gotten stuck at 1x about 3+ times and this always worked for me.
Sent from my PG86100 using Tapatalk
EDIT: Seeing your previous post about those download speeds makes me think your 3g is working fine. Get the app Network Signal Info and see if that tells you your on 1x.
Click to expand...
Click to collapse
For what it is worth, this worked on my EVO 4G that had the same problem.
http://forum.xda-developers.com/showthread.php?t=1153371
This thread should help u
Sent from my PG86100 using xda premium
I used to have the same problem. I did the exact same thing, and the problem is resolved.
w7excursion said:
Try ##3282#,edit,enter msl,EVDO,preferred mode- Automatic,menu, commit modifications,ok. See if that helps.
Click to expand...
Click to collapse
codd said:
Why is it that nobody can read my posts? Those are not MY speeds. I have netmonitor and I know I'm on 1xrtt. My d/l speed is about 30 kb/s. I'll try doing what you posted again but I have done it at least 12 times.
Click to expand...
Click to collapse
I've seen people's phones get stuck in cdma only (1x) mode, it's just an internal setting that needs to be changed.
It was fixed with this app, however I don't think it works with the 3D:
https://market.android.com/details?...GwsMSwxLDIxMiwiY29tLmtjLm5ldHdvcmtzd2l0Y2giXQ..
I can probably look around more tonight for something that will work with the 3D, I just can't remember off the top of my head.
Edit: probably the same solution as the post above mine.
This happens to my 3d when I first started messing with my prls I followed those directions in the op of the post I liked above and never have had a problem.
Sent from my PC36100 using xda premium
So here goes...
I'm on travel for the holidays, and we arrive in a backwoods Vermont town, then suddenly I lose cell signal, no biggie, this is usually expected in Vermont, but since we bring along our Wilson 45dbm cell booster, I usually regain my signal to full bars as soon as we turn it on (no matter where we are). I just thought that maybe the tower in the area was down from the snow we just got.
I thought nothing of it, until when we arrived at out destination and then I notice my phone still had no signal. At my suggestion a few years ago, I convinced the family we visited to invest in a Wilson home booster, which my wife currently has no problem picking up a signal from.
So this got me thinking, well maybe my PRL file was outdated/updated and the cell tower is not in my list. So I notice my wife has version 60690, and I had version 21090. Wow this must be really really old I thought, so I followed instructions using QPST and upgraded mine to the same version as my wife's. Still nothing, no signal what-so-ever.
Then I noticed that Sprint is upgrading their network and this meant that the newest version numbers were in the range of what I had on my phone originally, and now I think someone said 21092 is the absolute latest for the Evo 3D. So with this said, maybe I need to update my PRL to 21092, problem is I can't without a signal, and so far no one has posted it on any site yet. Anyone have the latest PRL file that I could try?
Then today I got to thinking that maybe the problem started at the car ride with the booster. Did my booster output too much power that it fried my radio? The car booster uses a stick-on antenna, not the direct to phone connector cable, so I don't see how it could have over saturated the radio, but now I am second guessing that notion. Or maybe, could my phone have a different radio than my wife's phone? I'm sure my evo3d was working the last time I was here in Vermont, but I'm not 100% certain it was the same phone.
So with this said, how can someone verify that the radio is shot? I've tried entering field trial mode using ##33284# to see if there is even a signal dbm level being reported, which it seems to see something because it does fluctuate.
Attached are some photos. Thanks!
For prls on the 3d I run the sprint corporate prls. I believe the latest we have on xda is 12126. The benefit of these is that when roaming it gives full 3g on the Verizon network as opposed to your 21xxx prl that only gives 1x. These prls I believe are distributed to customers in corporate accounts with sprint. I've been running 12124 with no problem s, I just haven't updated yet. I'm pretty sure there's a thread in the general section on this. I'm on tapatalk or I'd link you. Anyways, I doubt you fried anything... I've loaded the prl you did before and it didn't pull any signal for me either on my 3d... I have no clue what the difference is though.
Sent from my PG86100
1branchonthevine said:
So here goes...
Click to expand...
Click to collapse
I have no idea what your problem is but just wanted to say that I love the title of your thread. Sounds like a country and western song to me.
ramjet73
I forgot to add that this is a US Cellular tower that shows up as roaming on the sprint network. It's my understanding that prl files list roaming towers only, so it would seem to imply that something is wrong with the prl file. But then why does my wife's phone work when mine doesn't using the same prl. Anyhow, maybe I will try a corporate prl for giggles, just to see if it still even works. Thanks for the suggestion, I will try it soon and let you know!
Oh and thanks for the country song title idea, I should have had more fun with that one!
Sent from my PG86100 using xda app-developers app
my 3d is inferior to my 4G
Sent from my PC36100 using xda app-developers app
Thanks p3tr0s, I think I used the corporate PRL you suggested and after QPST rebooted the phone, I still had no signal. But somewhere in between going into my ICS >Settings>Mobile networks and toggling all the Domestic/Roaming/Guards and setting them back (even though this still did not give me signal), then going into >Settings>Usage and toggling Mobile Network suddenly my phone finally connect to the cell tower. Immediately after a good connection, I did a PRL update (in >Settings>System updates), and now it is using the latest 21092 PRL and it is still working just fine, so now I'm totally confused. I'm thinking that the issue was resolved somehow with the toggles. Even though I had tried toggling the Usage mobile setting and a couple of the data options on previous PRL's, I hadn't tried toggling all of them in the Mobile networks area as I did this time. But, then again, this is the first time I have gotten a signal, so maybe the combination of the corporate PRL worked is some weird way. Thanks!
Preface: About 3-4 months ago I had issues with the phone not locking to the airave for voice calls, but I could see the mobile light (on the airave) flash for data/3g transmissions. Spent a number of hours with airave tech support trying many different things include phone profile refresh, airave profile refresh, prl updates, factory reset, and some other things. None of these helped the situation. Then, about 2 or 3 weeks later everything worked properly all of a sudden. The 3 beeps returned to my inbound/outbound calls when within the airrave's proximity (indicating call is being routed through it rather than an actual tower).
Observations
After some testing on my end, I discovered several things when this issue was occurring.
From the ##debug#/field trail screen (you need sense for this). I was seeing the following:
http://db.tt/Ql4796Iu
When the phone used to work with the airrave for voice, my sid/nid was 4384/502.
When the issue is present, the phone locks onto sid 22439/120 . By all accounts, this sounded very much like a PRL issue more than anything else. The PRL of the airave had a lower priority than this new SID.
I made a post about this issue on s4gru.com. Shortly after, digiblur (our prl expert) joined the discussion and things made alot more sense. (See this thread for the discussion http://tinyurl.com/ayhk79j )
The solution was obvious, an entry to the prl had to be made that gave the airave greater priority than the 22439 sid, but only acted on one particular NID (502 ---- which appears to be consistent to all airaves, regardless of geographic region). So at this point, I knew what had to be done, but not quite how to do it. Digiblur made a very nice how to guide in the post above - see post #16.
Unfortunately, I never got a chance to actually try this out because sid 22439 was turned off and modifying the prl was no longer needed.... Until now!
About a week ago the issue resurfaced and no more airave for voice calls.
FIX:
*WARNING*: Use at your own risk, all typical and usual disclaimers of flashing anything/everything applies here. If you brick your phone, you can't hold me liable.
1) Pull existing PRL from phone
Unlike the old evo, we can't easily upload a prl to the new evo 4g lte by simply referencing a prl file from the dialer. The process is a bit more convoluted
A) Place phone into diag mode -- ##DIAG# in a sense dialer
B) You may need some new drivers http://db.tt/zc4HIsJK, use proper version for x86/x64. May have to manually force the driver.
C) Download the free version of DFS from http://www.cdmatool.com/
D) After installing and running the program (run as admin), select the proper port next to ports. It will say HTC DIAGNOSTIC INTERFACE COMx. Where x is some number.
E) Provide your 6 digit MSL code next to the box label SPC, then click on SPC to submit it to the phone. In the DFS LOG window, it will say "DEVICE UNLOCKED".
F) Just below where the MSL code was entered, click on PROGRAMMING, and just below that, NAM.
G) At the far right of the NAM window is the tool to manipulate the PRL.
Select READ to read it from the phone, then SAVE to save it to a file.
2) Modifying the PRL
You will need some tool to actually make the edits. I Used QPST's PRL editor.
Follow Digiblur's insturctions below - note, due to new prl's, the line numbers have changed, but the concept is the same.
ref: http://s4gru.com/index.php?/topic/2...-but-not-voice/page__view__findpost__p__60555
Ok... here's what you want to do. Scroll down to 465. This should be the 22439 SID record with the Geo set to New. This is the first record in your geographic area. Right Click on the 95(A,B)1x system type of this record. Don't change it, just right click on it and hit insert record. This should push 22439 down one record.
Now look at 4384, it should be on record 473 now. Let's use this as a model for our new record.
1.On the blank #465 record, change it to 95(A,B)/1x.
2.Change Neg/Pref to Pref (if you put Neg, this tells your phone not to use this)
3.Geography is going to be New (will change the one below it in a few)
4.Priority will be More (means this record has more priority than the next one)
5.Acq Index will be the same as 4384 (tells it which channels to scan), should be 14.
6.Roam Indicator should be a 1 (1 = Sprint, 160 = US roaming icon, 228 = international roaming)
7.Assn Incl Should be Yes since we want EVDO
8.Assn Tag will be 16 to use the value 16 flagged records in this Geo for EVDO.
9.Pn Assn should be No
10.Data Assn should be No
11.SID should be 4384
12.NID should be 502.
Now very important, don't forget this. On record 466 (22439 SID) you need to change the Geo to Same.
I would also change the Preferred Roaming List ID at the top to something like 25996 or something weird so you can check your settings/about screen from time to time as Sprint will automatically update your PRL sometimes.
So basically what happens now is when your phone does a network scan it looks for 4384/502 (your airave) first. If it can't find it, it looks for the 22439 on 800SMR, if it can't find that it will look for the 4384/65535.
I haven't tested this as I have no way of testing it in my area so please let me know if this works. In theory it should work though.
Click to expand...
Click to collapse
Here's what the finished product looks like on PRL 25010, line 460 was added.
http://img268.imageshack.us/img268/9894/prly.png
3) Uploading the modified PRL
A) Referring back to step 1G above, simply load the modified prl into the DFS tool, then click write to submit to the phone.
B) Exit diag mode in the phone by pressing MENU, DISABLE
C) Reboot the phone
NOTE: If you don't have QPST or don't want to go through the hassle of modifying your own PRL, below is the modified one. It's based on PRL 25010; I call it 25011.
25011.PRL http://db.tt/wk9muM1j
So now, when at home, the phone locks to the airave for voice, and either LTE, wifi, or 3G (via airave) for data. Also, it transitions properly too. When the airave is unplugged, phone locks back onto SID 22439. When the airave is again available, phone locks back to it.
Although my particular signal level is acceptable when on the 22439 sid, the airave signal is obviously much stronger. A side benefit is better battery life.
So if I have an airave I can just change my PRL to 25011 using QPST or do I have to follow all the steps above?
BD, I wouldn't do anything unless you're having the issue I was.
Yea I have not had many problems with my Airave until last night the mobile light was flashing for hours it finally went green on it's own, may have just been a Sprint thing who knows and thanks for your reply
Flashing trying to establish a connection, or flashing because maybe someone else was locked on to it... Did you get the usual 3 beeps when making a call?
My issue came to be mainly after LTE was lit up around here. That's when I started noticing the phone connecting to that strange 22439 sid and handoffs to the airave were flaking out.
To be honest I was told when someone connected to the Airave there was a beep but... mine has never beeped even when I make a call. So maybe I have it hooked up wrong.My setup is modem to router to Airave. I had it modem to Airave to router before but I noticed my internet was slowing down could be all in my head but after I changed it my speeds went up
The three beeps I refer to are heard on the HANDSET's earpiece. Not from the airrave itself. The flashing top light (Mobile light) flashes during the device's init process and whenever there is a voice/data connection in use.
As for hooking up, modem - router - airave should be fine. Considering how much grief it's caused, I don't trust it to function as a router. In fact, I have a dedicated lan port on my wrt54g that separates the airave onto it's own subnet so it's completely isolated from the rest of my network.
Ok I was wondering why all of a sudden my phone would beep when I made a call hahaha thanks for clearing that up
I was having the same problem... So I called sprint and they sent me a new 2.5 airave. 2 days later perfect connection and faster 3g... Cost for me - $0.00
^^How did you describe your problem to them?
I told 'em mine would work for data but not voice.
They never offered to swap it out for me. Too late now.
gpz1100 said:
^^How did you describe your problem to them?
I told 'em mine would work for data but not voice.
They never offered to swap it out for me. Too late now.
Click to expand...
Click to collapse
I told them nothing worked.. then they had me trouble shoot over the phone... Only one light would come on before during and after. So the tech said that it was shot and they would send one out..
lazydazed said:
I was having the same problem... So I called sprint and they sent me a new 2.5 airave. 2 days later perfect connection and faster 3g... Cost for me - $0.00
Click to expand...
Click to collapse
2.5 airrave?? I'm curious which one that is, i have a tall white one, my evo 3d would connect fine but the evo connects sometimes and usually it wont, also when my phone has lte (at home) it randomly drops to 3g or 1x and does a dance...
Sent from my EVO LTE 4G
Thanks!
I stumbled across this thread after a frustrating 3 days, and 8+ hours on the phone with Airave support. I don't have an Evo, but I do have a Galaxy S3 and was experiencing similar problems. My GS3 would not connect to the Airave 2.5 at all. They suggested replacing my handset (for a refurb, nonetheless), but I was convinced it had to be something else.
After installing your modified PRL, it works perfectly. I connect to the Airave with no problem for voice every time.
Thank you! :good:
The prl i linked in the OP is a bit outdated at this point, but the technique is still good. Grab a current prl from one of the prl threads and just apply the change.
Attached is a modified 16013 prl. I renamed it to 16913 .
After downloading just rename to 16913.prl, it's not an actual zip file.
You an also dial *99 it will now connected to air rave coverage
Sent from magical jelly bean.
@gpz1100, two questions. First, I have done this yet my phone will still randomly prefer anything over my airave. Using the modded PRL used to work but about 2 weeks ago quit. When I say anything, Sprint PCS, Sprint 1xA or even Verizon. Been through all the support stuff, went back to stock PRL and activation. Thoughts??
Second, when I use DFS to read the PRL and then save it, the PRL file is 0 bytes. I can load up a saved PRL file and write it to the phone no problem so the basics have been covered. This would be a S3.
It seems you've left the big S though.
1) Need to where in the PRL you've added the airave sid/nid combo. Location makes a difference because entries at the top have greater priority than those at the bottom. Use a tool like cdma field test tool to determine where you're actually connecting. Then see where that SID is in the prl relative to your airrave sid.
2) Something is wrong, are you unlocking the device properly before reading the prl? Perhaps you need to use a 16 digit password to read the prl? I'm not familiar with the s3, so you'll get little help there. Maybe check in the s3 section to see what's required to successfully read a prl.
3) I am officially done with sprint. Good riddance. Going on over a month now on a big red mvno. Data much improved over sprint.
gpz1100 said:
1) Need to where in the PRL you've added the airave sid/nid combo. Location makes a difference because entries at the top have greater priority than those at the bottom. Use a tool like cdma field test tool to determine where you're actually connecting. Then see where that SID is in the prl relative to your airrave sid.
2) Something is wrong, are you unlocking the device properly before reading the prl? Perhaps you need to use a 16 digit password to read the prl? I'm not familiar with the s3, so you'll get little help there. Maybe check in the s3 section to see what's required to successfully read a prl.
3) I am officially done with sprint. Good riddance. Going on over a month now on a big red mvno. Data much improved over sprint.
Click to expand...
Click to collapse
I actually went to the last entry in the previous Geo and over-wrote that with SID 4418 NID 501 which are what my Airave is transmitting on. I made that entry "new" for the Geo I'm in and changed the previous first Geo entry to same. Digiblur suggested I see what channel my Airave was transmitting on to make sure the channel was in the the acq record for me Geo. That channel was not so I added it. From then things were great until about 2 weeks ago. Since then it seems several people are having problems connecting to the Airave's.
The device gets unlocked, I get message indicating so in the DFS log.
I dunno. Frustrating.
Ok so I too had this issue with my evo4g lte not connecting to my new airave 2.5. I called airave customer support and after trouble shooting some things the tech finally pushed a new prl to my phone and all was taken care of. I am using prl 61096. He said if my phone tried to update the prl automatically I would loose the ability to connect to my airave so I just switched back to cm10.2 after I hung up the phone with them and I haven't had an issue with it yet.
If you don't have a need for huge data consumption, and verizon has good coverage in your area, come to the darkside - prepaid... Even save a few bucks!
@SleepyS40, you are very lucky you got a competent tech who understood why it wasn't connecting. Those are few and far between (competent techs that is). Had you remained on sense, sprint could potentially push a prl update automatically.
Hey all,
A few weeks ago, I switched from MeanBean to Jelly-Bam ROM. At the time, I thought this was a Jelly-Bam issue, but I'm pretty sure it's not now. When I switched ROMs, I noticed that my data was slow. I work in Baltimore County, MD and lost my 4G signal. I have occasionally seen 4G at home since I noticed this issue, but it's rare. I typically only get 3G and often it's less than 1MB/s. I tried switching back to MeanBean and that didn't help (I had updated the radio before switching back, I would think that would only help). I have updated my radio (currently running 1.12.11.1210) and that hasn't helped. What made me think it's not the ROM is that my wife has a stock Evo 4G LTE and she also has slow data speeds. BUT, my brother has an S3, also on Sprint and in the same town and he's getting 4G fine. I do have my have my Network Mode set to LTE/CDMA (actually on Jelly-Bam it's LTE/CMDA/EvDo). I'm running Jelly Bam 7.8.0 (CyanogenMod version 10.1.0-RC2-jewel). Please let me know if you have any ideas or suggestions as to what could be the problem with my phone. If I can provide more information, let me know and I'll get it for you.
Thanks so much in advance.
Baltimore and supporting areas are still going thru LTE upgrades, it's still on-off for some areas. Annapolis is lit 100% as far as I can tell.
Sent from my EVO using xda app-developers app
Is your evidence of the S3 pulling in 4G while your device does not anecdotal or have you performed a side-by-side comparison? The answer to this will help us narrow down your problem.
waterbound said:
Baltimore and supporting areas are still going thru LTE upgrades, it's still on-off for some areas. Annapolis is lit 100% as far as I can tell.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Unless things have gone backwards, I don't think that is the case. I used go get 4G in Baltimore. I've seen as high as 25MB/sec, maybe even higher. Now I don't see 4G ever down here. (I've seen it a few times at my home in York County, PA since this issue, but it doesn't last long and the fastest I've seen is maybe 5MB/sec. But most times its 3G and less than 1MB/sec.)
tmwilsoniv said:
Is your evidence of the S3 pulling in 4G while your device does not anecdotal or have you performed a side-by-side comparison? The answer to this will help us narrow down your problem.
Click to expand...
Click to collapse
My evidence is based on my seeing absolutely no 4G at the time (I've seen a few few times briefly as noted in the post above.), while my brother who is less than 1 mile away see's great 4G (faster than his home wifi so over 15 MB/s). I have consistently had terrible speeds around town while he consistently has good speeds. No, we have not stood side by side and done a test, but I know how my signals used to be and how they should be and I'm nowhere near that.
I was actually near the Key Bridge last night and where I usually get LTE or at least have in the past, I got solid 3G, I tried airplane method and reboot, switching from CDMA back to LTE to no avail. Soon as I got back into Pasadena the LTE was solid. I never was sure about the differences between the Samsund devices vs. HTC but for me, the signal is sporadic which in the past has been due to Sprint upgrades. Hope it gets better and check out the SG4RU site for specific information about your area. Thru have a ton of info that will let you aware of the work and or upgrades in your specific area in Baltimore.
Sent from my EVO using xda app-developers app
It just doesn't make sense to me that Sprint reception would decrease by so much and (as far as I can tell) completely lose 4G coverage at my work and mostly lose it at my home at the same time, while my brother continues to receive great service on his S3. I just don't see how that could happen.
Does anyone have any other ideas? Any ideas what could be wrong with my phone? Anything else I can update? Any settings for me to check that I might have missed? (I feel like I've check them all, but I'm up for anything at this point.)
Thanks in advance. This is driving me nuts.
KB3NRY said:
It just doesn't make sense to me that Sprint reception would decrease by so much and (as far as I can tell) completely lose 4G coverage at my work and mostly lose it at my home at the same time, while my brother continues to receive great service on his S3. I just don't see how that could happen.
Does anyone have any other ideas? Any ideas what could be wrong with my phone? Anything else I can update? Any settings for me to check that I might have missed? (I feel like I've check them all, but I'm up for anything at this point.)
Thanks in advance. This is driving me nuts.
Click to expand...
Click to collapse
I'd like to throw my own recent experience in here.
My wife has the OG Evo. I have the Evo LTE. While I do not get LTE in this area, I still get 3G coverage. The other day, out of the blue, my wife's 3G quit working and she has next to no service while I have solid coverage, and yes this is side by side.
Call me crazy right now because if what I am about to say, but I have this inkling of a feeling that Sprint is directly behind her almost completely losing signal in an area where 3 towers surround us to attempt to get one of us to call in, complain, and get coerced into an upgrade (she's due for one as of June 1st, go figure right?
I've noticed this happen whenever I was due for upgrades on my older phones too such as the Hero, Moment, etc... if I could pinpoint what they're doing, if they're doing anything, they'd be in some majorly serious ish.
So, I called Sprint and they walked me through #72786# update on my wife's phone. Apparently both of our phones were "off the network". We went through it for my wife's phone and it put it back on the network, whatever that means, but it didn't improve her service. They're now telling me our options are to take it to the nearest Sprint store with a repair center (the closest 2 are about an hour away each) or pay the shipping to return it to HTC.
They told me I could do the #72786# update on my phone and that it would not get rid of my root. Does anyone know this to be true? I'd like to try it on mine since they say it also is not "on the network". Because it does a firmware update, I wanted to check to see if that would interfere with the root access on my phone or my ability to gain root again, should I ever get rid of root.
Which brings me to my next question, if the above is safe for my rooted phone, I try it, and it does not work. How do I go about returning my phone to it's stock configuration? I've read a little about RUU, but haven't been able to figure out enough of it or where to get the RUU to feel comfortable doing it yet. If I do an RUU, will I be able to get my root (and s-off) rights back on my phone? How about if they try to bring my phone completely up-to-date? Is there a way to root currently up-to-date phones?
I know I've packed a lot of info and questions in there, but I would really appreciate any help and answers that people can give me. Thanks so much!!
jerry43812 said:
I'd like to throw my own recent experience in here.
My wife has the OG Evo. I have the Evo LTE. While I do not get LTE in this area, I still get 3G coverage. The other day, out of the blue, my wife's 3G quit working and she has next to no service while I have solid coverage, and yes this is side by side.
Call me crazy right now because if what I am about to say, but I have this inkling of a feeling that Sprint is directly behind her almost completely losing signal in an area where 3 towers surround us to attempt to get one of us to call in, complain, and get coerced into an upgrade (she's due for one as of June 1st, go figure right?
I've noticed this happen whenever I was due for upgrades on my older phones too such as the Hero, Moment, etc... if I could pinpoint what they're doing, if they're doing anything, they'd be in some majorly serious ish.
Click to expand...
Click to collapse
Did your wife ever update her profile? I'm 99 percent sure sprint isn't cutting off her 3g. Check the link in my sig, bottom of post 1 faq, those steps will work for the og as well...
Sent from my Evo 3D CDMA using Tapatalk 4 Beta
gunfromsako said:
Did your wife ever update her profile? I'm 99 percent sure sprint isn't cutting off her 3g. Check the link in my sig, bottom of post 1 faq, those steps will work for the og as well...
Sent from my Evo 3D CDMA using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks for the quick reply. Yes, we just updated her profile via System Updates-->Update Profile. If there's more to it than that, let me know. I'll take a look at the link in your signature too.
KB3NRY said:
Thanks for the quick reply. Yes, we just updated her profile via System Updates-->Update Profile. If there's more to it than that, let me know. I'll take a look at the link in your signature too.
Click to expand...
Click to collapse
Yeah there is quite a bit more to it. Is she rooted? Because that will help save her data if a hard reset (##786#) is in order...
Sent from my Evo 3D CDMA using Tapatalk 4 Beta
gunfromsako said:
Yeah there is quite a bit more to it. Is she rooted? Because that will help save her data if a hard reset (##786#) is in order...
Sent from my Evo 3D CDMA using Tapatalk 4 Beta
Click to expand...
Click to collapse
No, she is not rooted. So for now, I figured I'd start with trying this on my phone. Unfortunately, the MSL reader app wasn't able to read it. I'm actually in an old version of my phone. I'm going to install my last backup and work from that since I'm somewhat hopeful this will fix my problem. I might as well do it from my latest ROM. I'll have that up in 10 minutes or less and I guess I'll try to work through your instructions...
If it works on my phone, I guess I'll go through it with my wife's then. I have everything important backed up on mine. I'll have to check hers real quick to make sure she doesn't have any recent pictures, but I think those should be on Dropbox. I assume it will tell me before I might have to do that so I'll know to double-check everything if it comes to that.
Sorry if I've asked any questions that are explained in the instructions...I just wanted to reply and now I'll continue reading through them.
Hard reset on your phone will wipe everything in data/app as well as your internal sd. Your external will be fine as well as your wife's external however she will lose all apps, sms, mms, call logs, bookmarks via stock app, as well as any system settings.
Flowed from my Jewel using Tapatalk 2
gunfromsako said:
Note: All these fixes must be preformed on a stock or stock based rom with epst support and make sure you are in a known good signal area
Click to expand...
Click to collapse
So I should not be running these from my Jelly-Bam ROM? Or is that OK? If not, should I run an RUU will holding down volume while powering on and doing a factory reset work?
Thanks so much for your help!
KB3NRY said:
So I should not be running these from my Jelly-Bam ROM? Or is that OK? If not, should I run an RUU will holding down volume while powering on and doing a factory reset work?
Thanks so much for your help!
Click to expand...
Click to collapse
As long as you have epst support you are fine. Just try one of the codes... If it works your golden.
Flowed from my Jewel using Tapatalk 2
gunfromsako said:
As long as you have epst support you are fine. Just try one of the codes... If it works your golden.
Flowed from my Jewel using Tapatalk 2
Click to expand...
Click to collapse
I guess if it tries to dial and says "The feature code you have entered is invalid" or something like that, I'm not golden...
KB3NRY said:
I guess if it tries to dial and says "The feature code you have entered is invalid" or something like that, I'm not golden...
Click to expand...
Click to collapse
Sorry I'm not familiar with jelly bam is it sense based? You don't actually dial it the last # should activate it... Aosp roms will not work
Flowed from my Jewel using Tapatalk 2
gunfromsako said:
Sorry I'm not familiar with jelly bam is it sense based? You don't actually dial it the last # should activate it... Aosp roms will not work
Flowed from my Jewel using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I didn't dial. But when I hit the last #, what I entered before goes away and nothing happens.
Will these changes stick through a new ROM update? I guess I'll try them on the last stock save I have and then try to restore my MeanBean ROM (the last ROM I had that worked with 4G...Jelly-BAM seems to be what broke it.).
KB3NRY said:
Yeah, I didn't dial. But when I hit the last #, what I entered before goes away and nothing happens.
Will these changes stick through a new ROM update? I guess I'll try them on the last stock save I have and then try to restore my MeanBean ROM (the last ROM I had that worked with 4G...Jelly-BAM seems to be what broke it.).
Click to expand...
Click to collapse
Yes these will stick through Rom updates. I know epst works on meanbean, viper, operation jellybean, and the sense 5 port from my personal experience.
Flowed from my Jewel using Tapatalk 2