Samsung Galaxy Note Replacement Screen Purple - AT&T Samsung Galaxy Note I717

My dad cracked the screen on his Galaxy Note so I bought a replacement and replaced it. But when I turn the phone on the Samsung Galaxy Note logo turns from white to purple and everything after bootup has a purple tint to it. The weird thing is, if I boot up the phone with the old screen attached then replace the old one with the new one, while the phone is still on, the new one doesn't have purple tint to it. But if I reboot the phone with the new screen it turns purple again. I am not sure what to do. How can I fix this?

Get another replacement, there may be ways to fix it but you might as well just get new one because there could be more problems down the road
Sent from my SAMSUNG-SGH-I717 using xda premium

Display Drivers
android4545 said:
Get another replacement, there may be ways to fix it but you might as well just get new one because there could be more problems down the road
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I can't really afford to pay another $250 for another replacement. Why does it work if I bootup with old screen then replace with new one while the phone is on? The phone must be detecting the new screen as something else and using the wrong display drivers or something. Can't I force it to use the right drivers?

Is it the right part from Samsung or is it a non OEM replacement?
And why did you steal my avatar!?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

keller.jeff said:
Is it the right part from Samsung or is it a non OEM replacement?
And why did you steal my avatar!?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
The LCD part # is AMS529HA01 which is the same part # as the original. It also has Samsung branding on the front as well as the ribbon cable. So it appears to be a OEM part. I did not get it from Samsung, I got it from smartphonebay.net, which says it is 100% OEM.

emerysteele said:
I can't really afford to pay another $250 for another replacement. Why does it work if I bootup with old screen then replace with new one while the phone is on? The phone must be detecting the new screen as something else and using the wrong display drivers or something. Can't I force it to use the right drivers?
Click to expand...
Click to collapse
Sorry thought it was a free replacement, are you running ics or gb?
Sent from my SAMSUNG-SGH-I717 using xda premium

android4545 said:
Sorry thought it was a free replacement, are you running ics or gb?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I upgraded it to ICS a few weeks ago.

i had a problem like that on an old phone it turned out to be the ribbon cable wasn't fully connected. i ended up putting a tiny piece of foam on the connector to hold it down real good once the phone was put back together.

I agree. It sounds like bad ribbon connection to some signal needed for boot detection.
I almost bought a $250 replacement when I cracked my glass. AT&T was no help. Samsung offered to fix it cheaper. $197.01 including parts, labor and shipping to and from Plano, TX.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

emerysteele said:
I upgraded it to ICS a few weeks ago.
Click to expand...
Click to collapse
If it's still happening I'd say it's a hardware problem because new software should fix any bugs
Sent from my SAMSUNG-SGH-I717 using xda premium

emerysteele said:
I can't really afford to pay another $250 for another replacement. Why does it work if I bootup with old screen then replace with new one while the phone is on? The phone must be detecting the new screen as something else and using the wrong display drivers or something. Can't I force it to use the right drivers?
Click to expand...
Click to collapse
A mate of mine is having the exact same issue as you. He brought his replacement screen off Ebay which was "claiming" 100% OEM. On boot the Samsung Galaxy Note logo stays white for a couple of seconds then turns a shade of purple. We did discover that if you install a GB rom the issue is resolved. In particular if a GB kernel is installed the issue goes away. Did you find a fix to your problem?

d1wepn said:
A mate of mine is having the exact same issue as you. He brought his replacement screen off Ebay which was "claiming" 100% OEM. On boot the Samsung Galaxy Note logo stays white for a couple of seconds then turns a shade of purple. We did discover that if you install a GB rom the issue is resolved. In particular if a GB kernel is installed the issue goes away. Did you find a fix to your problem?
Click to expand...
Click to collapse
I've got the exact same problem. I replaced the display on my N7000 and a few seconds after showing the logo it goes purple and stays that way. I installed a GB ROM and voila! No more purple. But I want to run a Jelly Bean ROM! This is driving me nuts!
Anyone found another solution yet?

Related

Vibrant home button leakage

I've been searching on google and on here and can't seem to find a thread on it.
My home button led seems to leak half way into my display when i'm viewing a black screen.
The screen would display a black image and having the buttons on makes the home button leak on the screen
It is really annoying... Anyone else have this issue? it looks like a lightsaber on my phone...
Sent from my HD2 using xda premium
Given where you sent this message from, I think you may be in the wrong forum.
If not, I can't say I've had such an issue, but apart from using a mod to turn off the LEDs for good, there's probably not much you can do.
i'm using my hd2 because I just got my vibrant from Samsung for a screen replacement....
No one has a problem if the led from home leaking?
Sent from my HD2 using xda premium
i'm using my hd2 because I just got my vibrant from Samsung for a screen replacement....
Click to expand...
Click to collapse
I think you just answered your own question
kaintfm said:
I think you just answered your own question
Click to expand...
Click to collapse
haha thats what everyone would think but it had this problem before i even sent it out
thanks for your help!
Exact same problem with the home key, gradually learnt to live with it
How bad is yours? I just need to feel better about it lol
My gf is not as bad as mine
Sent from my HD2 using xda premium
In complete darkness it gets to about half of the screen. In normal light its not as bad.
Sent from my SGH-T959 using XDA App
Yea I have the same problem, My gfs doesnt. I think its a factory defect when they are putting it together. One little pinhole in the paint that seperates the softkeys from the rest of the screen and boom, you have led glare half way up the screen.
I had 3 vibrants replaced an they all had same problem but I dont care buttons are off most of the time
Sent from my SGH-T959 using XDA App
I have this problem but it's very minor. I barely see it when dark. Do they just give you a new vibrant for replacement? Were you able to force them to let you do like an upgrade to a better phone or something?
no they replaced the chrome bezel and the housing + the display and glass...
It's practically new now..
Jasonhunterx said:
I had 3 vibrants replaced an they all had same problem but I dont care buttons are off most of the time
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Same exact thing here. The home button leakage is on most(if not all) vibrants. But it's only noticable in near or in pitch dark really. Using 2.2.1 roms turn off the lights while not being used but for some reason, that particular build on whatever rom always decreases sensitivity to the point where going back to used applications(holding home) doesn't work while the processor is being used extensively(800-1ghz) which is REALLY annoying. Anyone else by chance?
Cerv3r said:
no they replaced the chrome bezel and the housing + the display and glass...
It's practically new now..
Click to expand...
Click to collapse
Since doing the work it too much, Ilm sure they instead give you a refurbished vibrant and used your old one for parts. In other words, Samsung didn't repair anything for yours but gave you another vibrant(which could be using parts from various sources).
It's the same imei and the same way the home button leaks... I also have a minor scratch on the camera which mine still has
Sent from my SGH-T959 using xda premium

[Q] Help Me.. What is the Problem For my S2?

Help Me.. What is the Problem For my S2?
Please Help Me what happened to my mobile..
I resetted for nearly 10 times. no use of resetting
Hard Reset also done..
Software updated by ODIN. No use.
Please watch this video and tell what happen to my S 2.
http://www.youtube.com/watch?v=8At9ckXQ8zc
Please Please.........
Seems to me that your Digitalizer is dead, are u still under Sammys warranty? If so it seems time to take it....
josealejandro93 said:
Seems to me that your Digitalizer is dead, are u still under Sammys warranty? If so it seems time to take it....
Click to expand...
Click to collapse
ya. i Bought my mobile on sep 24 2011
Did you mean Touch Pad? josealejandro93
Helppppppppp
It's off to the service center for you pal..
Sent from my GT-I9100 using xda premium
Weird touch screen issue. Return it to Sammy.
Really.......
chinnupepsi4all said:
Really.......
Click to expand...
Click to collapse
Really.......That's not good, get it sent off or try fitting a new one off ebay.
I had a very similar issue with my old HTC Hero, it turned out that the digitizer (touch screen) was broken. ( started more or less like yours but eventually the whole bottom part of the screen didn't work) I was wayyyy off my guarantee so I bought a cheap digitizer off eBay and did a home reparation, worked very well for me :-D
So yeah just send it in for repairs and you'll be just fine
Sent from my GT-I9100 using XDA App
IroniX2 said:
I had a very similar issue with my old HTC Hero, it turned out that the digitizer (touch screen) was broken. ( started more or less like yours but eventually the whole bottom part of the screen didn't work) I was wayyyy off my guarantee so I bought a cheap digitizer off eBay and did a home reparation, worked very well for me :-D
So yeah just send it in for repairs and you'll be just fine
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thanks Every Body....

Green screen camera

I have a problem with the camera on my prime and am wondering if anyone else is experiencing this. Whenever I go to the camera and use the back facing camera it just shows a green and red fuzzy screen, ffc works fine. Have wiped and reflashed and even changed ROMs, but no help, I am on androwook hb1.4 right now, was on the red virus ww .15 when it started. Any help would be appreciated.
Thanks in advance
Sent from my SPH-L900 using xda app-developers app
Here is a picture of it, I tried to screenshot it on the tablet but I get a notification saying "could not save screen shot, storage may be in use" .......I'll try to get a logcat
Sent from my SPH-L900 using xda app-developers app
npesa92 said:
Here is a picture of it, I tried to screenshot it on the tablet but I get a notification saying "could not save screen shot, storage may be in use" .......I'll try to get a logcat
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
It is maybe a hardware issue. Please search in this forum or Q&A forum for this issue. It has been reported a few times.
Sent from my HTC Desire HD using xda premium
Hardware issue. RMA it. I just got mine back last month. Only took about 10 days.
theandies said:
Hardware issue. RMA it. I just got mine back last month. Only took about 10 days.
Click to expand...
Click to collapse
OK I'll try and take it to best buy first, that's where I purchased it. Correct me if im wrong but the prime was recalled right? I've read other posts of people being upgraded and so forth, was wondering what they do about unlocked primes?
Sent from my SPH-L900 using xda app-developers app
npesa92 said:
OK I'll try and take it to best buy first, that's where I purchased it. Correct me if im wrong but the prime was recalled right? I've read other posts of people being upgraded and so forth, was wondering what they do about unlocked primes?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
The same thing happened to my Prime soon after I got mine back in January. There is a quick, but temporary fix to the problem -- you have to squeeze area right below camera lens. You have to press quite hard, so be sure you don't accidentally crack your screen or something. However, like, I said, this is just a temporary fix it WILL come back. I brought mine to a repair center and all they did was take out the camera and re-seat it. That worked for a while, but all it came back again. Then I brought it back, and they replaced the camera entirely, and I've never had a problem since.
Greening Syndrome
Seems the green screen with lines on using rear camera disease is spreading,,,my TF201 has just started misbehaving BUT...it had just returned from a 3 week repair job (under warranty fortunately) to get the screen fixed. The original problem was a wall of alternating black and white and then colour lines when turning on the device,,,which did not disappear. Really very disappointing as I have only had the tablet for 6 months and have not dropped it at all...my first tablet but I'm not impressed with Asus products though to be fair the process for getting it repaired was efficient and prompt even though the actual repair time was long.
Experiencing the same issue myself, only had the tab about a week, and it's still under warranty. RMA since 6/12/12. I'm not really expecting to see it back this side of Christmas.

[Q] SGS3 Suddenly Died... What happened??

Hi there Folks....
My SGS3 Pebble Blue suddenly went dead. I leave my phone overnight with 17% battery charge, I dont remember well if the wifi was on, but in the morning it was completely dead, no button respond at all. Thinking that the battery has been emptied, i plug in the charger, but the phone doesnt respond, not even the LED nor the battery display that is charging. So, I leave it on the charger for a couple of hours, like 3 or 4 hours but still its dead.
My SGS3 is running at Omega ROM v34, everything is working fine before the incident, no lags, no system crashes. It is made in vietnam and I got it from a local network provider in Phillippines.
What can i possibly do to revive my SGS3? I could not send it to Samsung for warranty because, first it is running in custom firmware, next is warranty is completely void because i have already replaced my LCD Screen last month. I dropped my phone and the Screen was damaged so I ordered a screen replacement and I myself replaced the damaged screen.
Please help, I have no idea what happened....
Sounds like the S3 "Sudden Death" issue that was in the media some days ago (so the chance is high that it is a physical defect and you can't do much against it...).
Try a google "Galaxy S3 Sudden Death" search and you should get tons of informations about the issue. As far as i know Samsung Support repairs/replaces damaged devices without trouble.
Looks like they replace the mainboard on those damaged devices. Some people are saying that it might be some sort of planned obsolescence that kicks in to early.
That would also explain why Samsung is not talking about those issues at all and repairing/replacing damaged devices without further asking.
€dit:
Take look here for further informations: http://forum.xda-developers.com/showthread.php?t=1993044
77lupin77 said:
Hi there Folks....
My SGS3 Pebble Blue suddenly went dead. I leave my phone overnight with 17% battery charge, I dont remember well if the wifi was on, but in the morning it was completely dead, no button respond at all. Thinking that the battery has been emptied, i plug in the charger, but the phone doesnt respond, not even the LED nor the battery display that is charging. So, I leave it on the charger for a couple of hours, like 3 or 4 hours but still its dead.
My SGS3 is running at Omega ROM v34, everything is working fine before the incident, no lags, no system crashes. It is made in vietnam and I got it from a local network provider in Phillippines.
What can i possibly do to revive my SGS3? I could not send it to Samsung for warranty because, first it is running in custom firmware, next is warranty is completely void because i have already replaced my LCD Screen last month. I dropped my phone and the Screen was damaged so I ordered a screen replacement and I myself replaced the damaged screen.
Please help, I have no idea what happened....
Click to expand...
Click to collapse
Read the Sudden Death Thread first .
jje
Also post this in the s3 philippines thread. I been monitoring when this thing will start manifesting on our shores. You're the first one from philippines that reported this problem here or that I have read.
Sent from my Galaxy Nexus using Tapatalk 2
I highly suggest you just send it back to Globe/Smart and get a replacement xD
Sent from my GT-I9300 using xda premium
Unfortunately my S3 died on me as well on the eve of new year!
I'm waiting for the holidays to be over so I can send it to the Samsung service center.
Hopefully, they will cover the repairs with the warranty and they will not notice that my phone is rooted and running on custom software..
Sent from my Transformer TF101 using Tapatalk HD
Yup... I experience that too....its the motherboard issue... My phone is rooted.. Sent to samsung service centre... They replaced it.. No question asked..
Kamal rhaiyan
Singapore
Sent from my GT-I9300 using xda app-developers app
worry not my friend
if the mobo died, they won't ask questions about roms or root
it will be replaced right away
kinda sad samsung experiences thigs like these....
RorixRebel said:
worry not my friend
if the mobo died, they won't ask questions about roms or root
it will be replaced right away
kinda sad samsung experiences thigs like these....
Click to expand...
Click to collapse
Does it mean that my mobo died even if I can still boot in download mode?
Thank you!
Sent from my Transformer TF101 using Tapatalk HD
Yes... To double check... Go to download mode and see whether brand name ''i9300''is there... If no, pit partition messed up... Confirm motherboard dead..
Sent from my GT-I9300 using xda app-developers app
Kamal Rhaiyan said:
Yes... To double check... Go to download mode and see whether brand name ''i9300''is there... If no, pit partition messed up... Confirm motherboard dead..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
wow. thanks for the info mate. it is indeed not showing the brand name. I'm going to the service center tomorrow. will keep u guys updated.
Its ok mate... Its only for few days... It doesn't take long to replace motherboard.
Cheers!
Sent from my GT-I9300 using xda app-developers app
All the best Buddy.
Sent from my GT-I9300 using xda premium
I am from MEXICO too, got my SIII from Sanborns, Nov 11, have you heard about more cases of sudden death in our country?
http://bgr.com/2013/01/02/samsung-galaxy-s-iii-fix-279600/
They acknowledge it.
Sent by GT-I9300 SuperNexus
Kamal Rhaiyan said:
Its ok mate... Its only for few days... It doesn't take long to replace motherboard.
Cheers!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
IntenseTorture said:
All the best Buddy.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Have sent in the unit yesterday to the service center. They have checked the download mode and asked me if I did some rooting and I said no.
From the download mode they cannot see the product name but there is no custom binary download numbers too so they said it is covered by warranty and just this morning, I called them up to follow up and they said they already ordered a new motherboard. I asked again if there are no problems with regards to the warranty and they have confirmed that it is indeed covered. Hopefully, in a week I'll get the repaired unit
reycharlesconrad said:
Have sent in the unit yesterday to the service center. They have checked the download mode and asked me if I did some rooting and I said no.
From the download mode they cannot see the product name but there is no custom binary download numbers too so they said it is covered by warranty and just this morning, I called them up to follow up and they said they already ordered a new motherboard. I asked again if there are no problems with regards to the warranty and they have confirmed that it is indeed covered. Hopefully, in a week I'll get the repaired unit
Click to expand...
Click to collapse
So have you gotten your phone back yet? Which service center did you bring your unit to?

Screen off during call problem

Screen turns off when placing phone to ear as expected however does not come back on when pulled away. Only after the 2nd party disconnects will the screen come back on after pressing power button and the only to the lock screen. This is a new issue. Anyone else having this problem or know of a solution?
Sent from my SCH-I605 using xda premium
Maybe faulty proximity sensor. I had that issue in my galaxy nexus. Ended up getting a new one
Sent from my SCH-I605 using xda app-developers app
I'll inquire with Verizon about that.
Sent from my SCH-I605 using xda premium
Call insurance. Get a new one or refurb for that matter.
Sent from my SCH-I605 using xda app-developers app
Are you stock? Rooted? I ran into this issue a few times with persus kernel.
I'm having the same issue. Anyone find a fix for this?
Just got off the phone with Verizon. They're sending a replacement. Something wrong with proximity sensor. Actually appears to be a speck behind glass over sensor.
Sent from my SCH-I605 using xda premium
I have also been having a bit of trouble with the same thing. On top of the screen not always coming on when I move the phone away from my ear during a phone call, sometimes when I pull up the keypad while on the phone and attempt to press a key, the screen will turn off. I think it's because the shadow of my hand makes it think it's back up to my ear. I see two little sensors next to the camera; one of them appears to have a little speck or dot on it. Maybe a piece of dirt in it? Can somebody who doesn't have this problem check and see if they see a very very tiny dot on the sensor closest to the in call speaker?
I've been having the same issue with my Note 2, I was wondering if this could be a software issue since I have messed with a few roms but decided to go back to stock. I've been looking everywhere for a solution, even went as far trying to find replacement files to see if that would fix it, but to no avail. I guess I'll have to replace the device.
tbns said:
Can somebody who doesn't have this problem check and see if they see a very very tiny dot on the sensor closest to the in call speaker?
Click to expand...
Click to collapse
I am not having issues, and do not see a dot on the sensor.
Sent from my SCH-I605 using xda premium
scurley1898 said:
Just got off the phone with Verizon. They're sending a replacement. Something wrong with proximity sensor. Actually appears to be a speck behind glass over sensor.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Have you received your replacement?
If you have, did they send you a certified like-new or a brand new replacement?
Thank you
SilentO said:
Have you received your replacement?
If you have, did they send you a certified like-new or a brand new replacement?
Thank you
Click to expand...
Click to collapse
I received a certified like new and it's in perfect condition.
Sent from my SCH-I605 using xda premium
I have found a fix for this, at least for me, as I mentioned in an earlier post I had flashed a few ROMs, decided to search the other carriers galaxy note 2 forums and found this:
http://forum.xda-developers.com/showthread.php?t=2070360&highlight=proximity+sensor
Luckily there is a Perseus kernel for verizon too here: http://forum.xda-developers.com/showthread.php?t=2048013
Will do this later and report.
Edit: the perseus kernel by itself didn't do the trick but beanstown's stock root/deodex and jelly 'beans' roms did! I now have everything working like new with cleanrom installed
scurley1898 said:
I received a certified like new and it's in perfect condition.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
You probably got one that was repaired in China. Hate getting phones from the Chinese, cheap but poor quality. Thanks
Sent from my SCH-I605 using xda app-developers app

Categories

Resources