I am having issues with 4G in fact I can't connect to it anymore and need some help. I'm on S-Off my HBOOT is 2.25.2525 the radio is 1.22.10.0421r/1.22.10.0424r OpenDSP-v10.6.0.7611.00.0919 eMMC-boot. I'm currently running Newts OneXxX RLS1. I've been having issues with the phone just randomly shutting off. Thanks for the help
gal419 said:
I am having issues with 4G in fact I can't connect to it anymore and need some help. I'm on S-Off my HBOOT is 2.25.2525 the radio is 1.22.10.0421r/1.22.10.0424r OpenDSP-v10.6.0.7611.00.0919 eMMC-boot. I'm currently running Newts OneXxX RLS1. I've been having issues with the phone just randomly shutting off. Thanks for the help
Click to expand...
Click to collapse
Could be time for a re-flash. Also, try a different SIM card.
gal419 said:
I am having issues with 4G in fact I can't connect to it anymore and need some help. I'm on S-Off my HBOOT is 2.25.2525 the radio is 1.22.10.0421r/1.22.10.0424r OpenDSP-v10.6.0.7611.00.0919 eMMC-boot. I'm currently running Newts OneXxX RLS1. I've been having issues with the phone just randomly shutting off. Thanks for the help
Click to expand...
Click to collapse
What I would do is flash the latest leak, do a factory reset with the stock recovery, flash amon back, and then ur Rom. Why not update to RLS 3.2.1 while ur at it.
Sent from my ADR6425LVW using Tapatalk 2
Just had a similar issue. Just pulling the SIM and putting it back in seemed to work for me, but I have no idea why it did.
Sent from my ADR6425LVW using Tapatalk 2
I will follow the suggestions when I get home.from work. For now I flashed an RUU and I'm back to stock. I'll see what happens tonight and post. Thanks.
sr71pav said:
Just had a similar issue. Just pulling the SIM and putting it back in seemed to work for me, but I have no idea why it did.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
gal419 said:
I will follow the suggestions when I get home.from work. For now I flashed an RUU and I'm back to stock. I'll see what happens tonight and post. Thanks.
Click to expand...
Click to collapse
toggle "airplane mode" should do the fix.
turn off mobile data
turn on airplane mode
wait for airplane icon
turn off airplane mode
turn on mobile data
Related
I just flashed gingeritis 3d and for some reason i have no service. I have mr2 radio I was just running das bamf 3.0 and there was no issue and now I have no service if anyone can help let me know thanks
I get this every once and a while and just use the radio tool and toggle between cdma only and cdma/lte radio and it comes right back, hope that helps
camblue said:
I get this every once and a while and just use the radio tool and toggle between cdma only and cdma/lte radio and it comes right back, hope that helps
Click to expand...
Click to collapse
If this doesn't work, you could just try a reboot.
Try the mr2.5 radio / should fix it
Sent from my Thunderbolt using Tapatalk
same thing happened to me...just did a reinstall and it came back
im having issuses with gb theory rom. but i think i missed a step
Make sure your apn settings are correct! Re seat the sim card?
Sent from my ADR6400L using Tapatalk
ok so I was running viper 4g 1.0.0.0 and everything was working fine. I then decided to flash cm10, the 8.20.2012 build, and I ran that for a few hours, everything worked great and I loved how fast the Rom was. Long story short I was browsing the web this morning and suddenly my radio shuts off, I wait a moment and then it turns back on, then shuts off and turns on intermittently. I get annoyed after 20-30mins of this so I restore my backed up viper Rom. Well now the radio on this isn't working either....someone help me please!! I also know sprint is doing work on towers and I live in the san antonio area, but I know its not them cause I'm posting this from my girlfriends EVO 3d! HELPPPPPPPPPPPPPP!!!!!!!!!!
what do u mean radio?? your 3g your wifi.. gps..?? or radio u listin 2??
My 3g,1x, data or no data...it doesn't work
Sent from my EVO
sho0z said:
ok so I was running viper 4g 1.0.0.0 and everything was working fine. I then decided to flash cm10, the 8.20.2012 build, and I ran that for a few hours, everything worked great and I loved how fast the Rom was. Long story short I was browsing the web this morning and suddenly my radio shuts off, I wait a moment and then it turns back on, then shuts off and turns on intermittently. I get annoyed after 20-30mins of this so I restore my backed up viper Rom. Well now the radio on this isn't working either....someone help me please!! I also know sprint is doing work on towers and I live in the san antonio area, but I know its not them cause I'm posting this from my girlfriends EVO 3d! HELPPPPPPPPPPPPPP!!!!!!!!!!
Click to expand...
Click to collapse
Are you on the latest radio version? If not, try updating it:
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO LTE
Someone help please!
Did you follow the proper steps to go back to a sense Rom?
I have yet to do it but the part about using superwipe and flash image gui seem pretty important
Sent from my EVO using xda app-developers app
premo15 said:
Are you on the latest radio version? If not, try updating it:
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO LTE
Click to expand...
Click to collapse
I have been on these radios since before the roms I was using. But I reflashed them hoping it would do the trick, and it didn't. Still not working.
00mred00 said:
Did you follow the proper steps to go back to a sense Rom?
I have yet to do it but the part about using superwipe and flash image gui seem pretty important
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
The problem started before I flashed back to viper
sho0z said:
I have been on these radios since before the roms I was using. But I reflashed them hoping it would do the trick, and it didn't. Still not working.
Click to expand...
Click to collapse
Could be a bad device. I would restore to stock and take it in under warranty.
Sent from my SCH-I535 using xda premium
Restore your phone from a backup you do have a backup.
Sent from my MEAN LTE
Forgive me if I am wrong but it doesn't work that way when going to cm10 or back
I thought it was a mandatory deal to flash the cm10 boot IMG prior to flashing cm10 and flashing sense Rome boot IMG prior to going back to a sense Rom
Like I said...highly possible I am wrong but I recall reading that
Sent from my EVO using xda app-developers app
My 3g has been cutting out alot too. Sometimes I have to go to settings and turn off the radio and turn it back on. I'm not on cm10. Could be network rather than phone.
Sent from my EVO using xda premium
I am on latest baseband version : 1.12.11.0809 and Hboot 1.19. I am not S-OFF but would be doing it very soon.
I want to downgrade to earlier baseband/radio version, is it possible?
honest1212 said:
I am on latest baseband version : 1.12.11.0809 and Hboot 1.19. I am not S-OFF but would be doing it very soon.
I want to downgrade to earlier baseband/radio version, is it possible?
Click to expand...
Click to collapse
Not sure if it's possible but may not be a good idea most of the current rom are based off the latest firmware 2.13
No, you will hard brick
Sent from my EVO using xda premium
mrlakadaddy said:
No, you will hard brick
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
honest1212 said:
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
Click to expand...
Click to collapse
No hard brick, meaning your phone will be a paperweight don't do it!
Sent from my EVO using Tapatalk 2
thicklizard said:
No hard brick, meaning your phone will be a paperweight don't do it!
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No chances at all?
I tried it. Unrecoverable brick
Sent from my EVO using xda premium
corcgaigh said:
I tried it. Unrecoverable brick
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Ok, so can I run older version RUU if I do S-OFF? Will that downgrade the radio?
honest1212 said:
Ok, so can I run older version RUU if I do S-OFF? Will that downgrade the radio?
Click to expand...
Click to collapse
I'm not sure. All the info you need you can probably find in captain throwbacks firmware thread
Sent from my EVO using xda premium
i did it and got lucky.. i swear it was an act of god that my phone still works.. i tryed to downgrade and when running the ruu in bootloader my battery died!!! yep sh*t was crazy.. i thought it was gone but i charged it for a bit got it to come on.. it downloader half the ruu and it was stuck it kept going from bootloader screen to stock recovery then shut off.. over and over.. then it finished running the ruu and it rebooted for the 20 th time and it was good.. i was back to stock and phone was back.. it was crazy.. im so lucky that it didnt brick
evo401 said:
i did it and got lucky.. i swear it was an act of god that my phone still works.. i tryed to downgrade and when running the ruu in bootloader my battery died!!! yep sh*t was crazy.. i thought it was gone but i charged it for a bit got it to come on.. it downloader half the ruu and it was stuck it kept going from bootloader screen to stock recovery then shut off.. over and over.. then it finished running the ruu and it rebooted for the 20 th time and it was good.. i was back to stock and phone was back.. it was crazy.. im so lucky that it didnt brick
Click to expand...
Click to collapse
That sounds very risky. I would rather search for downgrading rather than search later for unbricking....
Guess I was one of the lucky ones. I upgraded my radios, then I got horrible 3g and cell service. I just flashed the downgraded radios and was back in business.
So I guess the moral is YMMV.
Sent from my EVO using xda premium
corcgaigh said:
I'm not sure. All the info you need you can probably find in captain throwbacks firmware thread
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Can you put the link?
honest1212 said:
Can you put the link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704612
Sent using my HTC EVO LTE and a magic wand
honest1212 said:
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
Click to expand...
Click to collapse
You should look at captain throwbacks post. I tried to downgrade radios and completely hard brick the phone. Don't risk it man!
Are you guys sure about this downgrading and bricking business? I know on the EVO 4G, the original one, the first exploit to change its ESN was to use an older radio... And I must have downgraded and upgraded radios on that like 5 times...
My memory may be hazy, but I am sure I did that. The same goes for Droid Incredible. Unless EVO LTE is completely different?
I am thinking of upgrading my radio too because I am using the EVO LTE on Verizon, and the signal strength is about 10db worse than a regular VZW 3G, right next to it. But if the update makes things worse, I was wondering if I can just downgrade to the stock radio...
So again, are you guys sure about this?
ProFragger said:
Are you guys sure about this downgrading and bricking business? I know on the EVO 4G, the original one, the first exploit to change its ESN was to use an older radio... And I must have downgraded and upgraded radios on that like 5 times...
My memory may be hazy, but I am sure I did that. The same goes for Droid Incredible. Unless EVO LTE is completely different?
I am thinking of upgrading my radio too because I am using the EVO LTE on Verizon, and the signal strength is about 10db worse than a regular VZW 3G, right next to it. But if the update makes things worse, I was wondering if I can just downgrade to the stock radio...
So again, are you guys sure about this?
Click to expand...
Click to collapse
First off, the Evo LTE is different then previous phones. It uses the newer Qualcomm Secure Boot 3 which does A LOT more version and signature checking. It also uses eMMC flash memory instead of NAND. (Which gives the added ability of setting individual blocks of memory as read-only via low level firmware, before the OS even boots up).
Now, that said, some ppl have bricked their Evo LTE's by DOWNGRADING firmware. The biggest problem is that it's unclear what the exact combinations are which result in a brick. Therefore anyone attempting to downgrade should be very careful and read through both firmware threads before trying it themselves.
As far as using these radio's with Verizon service, your kinda on your own. The Evo LTE is the Sprint version of the HTC One X/XL and therefore the radios are (probably) tuned for best performance on Sprint's network.
And before someone asks, NO you can not use One X/XL radios on the Evo LTE. While in theory they should work, in reality you are almost 100% guaranteed to brick.
Unfortunately the newest generation of phones is much more secure, more complicated and extremely lacking in hardware documentation, compared to older ones.
-SLS-
That's a very fair, detailed post Soul Shadow... Appreciate the knowledge... Guess I will not be touching the radios then...
Unless you guys can confirm or debunk that the new radios have improved your signal strength by any chance?
ProFragger said:
That's a very fair, detailed post Soul Shadow... Appreciate the knowledge... Guess I will not be touching the radios then...
Unless you guys can confirm or debunk that the new radios have improved your signal strength by any chance?
Click to expand...
Click to collapse
OK, after reading a lot and with help of all of you guys, I finally downgraded my radio from 1.12.11.0809 then I went to 1.05.11.0606 and then to 1.02.12.0427.
Though it didnt helped me getting 3G signals but downgrading is possible and this may help anyone out there to do the same.
I used the bootloader flashables and just flashed it. I am on 1.19 boot with S-OFF.
Just tried downgrading from 1.12.11.0809 (latest OTA) to 1.05.11.0606 via bootloader and got a brick. I'm on 1.19 S-OFF hboot.
Any ideas on unbricking besides JTAG?
So I am a flashaholic, I admit it. And proud lol
However, I have noticed that I am no longer getting 4g/LTE connectivity. I keep getting network errors on pretty much every rom I try I have decent service in my area and my wife's Galaxy s3 is getting great service.
To get some service i have been switching to CDMA only is there something else I could do?
Tks
MB
You could try update PRL & Profile.
Or RUU back and you still experience issues then go to Sprint to warranty it out.. Hope you get it fixed
Sent from my EVO using Tapatalk 2
scoot0073 said:
You could try update PRL & Profile.
Or RUU back and you still experience issues then go to Sprint to warranty it out.. Hope you get it fixed
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I had the same problem until I updated radios that matched the ROM base I was using... I could nandroid back to earlier roms and have 4g, but new roms wouldn't connect reliably to 4g until I updated the radio to match. I'm S-On, so I just did the recovery flashable radio.
Thanks
Thanks folks so I am running the Super LTE Milestone 4.1 with Soff. My current Radio (Baseband is 1.12.11.0809 ) does anyone have any idea what radio I should be running with SuperLTE Milestone ?
thatenglishguy said:
Thanks folks so I am running the Super LTE Milestone 4.1 with Soff. My current Radio (Baseband is 1.12.11.0809 ) does anyone have any idea what radio I should be running with SuperLTE Milestone ?
Click to expand...
Click to collapse
Try doing a full update from this post --------> http://forum.xda-developers.com/showthread.php?t=1704612&highlight=radios+jewel
Take every PRECAUTION when flashing radios PRI etc...., they are they easiest way to brick your phone!
It happened to me. After flashing mean 6.4 I lost LTE. The only way I could connect is by switching to CDMA only. I reflashed different roms, unrooted, updated the software, re rooted, soff again, fixed permissions, profile, prl, called sprint and did numerous resets.
In other words, I think its toast.
I'm headed to the sprint store in the morning.
Sent from my EVO using Tapatalk 2
Hi All, Yesterday I was trying to have my old backup Rezound into CM10 to replace a broken S3. I followed the thread http://forum.xda-developers.com/showthread.php?t=2113140 to flash my Unlocked and S-On to CM10 but after all the steps (see Q&A How to flash on S-On) everything seemed to be working ok but I have no service at all. Then I decided to move to TACHYON following the details on http://forum.xda-developers.com/showthread.php?t=2431552 but again, no service at all. Today I decided to do a downgrade to Stock via RUU (http://forum.xda-developers.com/showthread.php?t=2509770), I even got S-Off to follow step by step of that thread, however after all the efforts, still no service. The first time I botted after all the steps in that thread, I could see 3G for a few seconds but then everything went off and no service (I see 1 bar in my signal from time to time, but can't even make a call).
Any ideas on how to find out what the issue is and how to solve it? Right now I', S-Off, Re-Locked and with the latest RUU
So here's the new finding: I changed mobile network to just CDMA and now I could get 3G and service (good news), however if I go back to LTE/CDMA I never get to 4G. Still researching
rhaces said:
So here's the new finding: I changed mobile network to just CDMA and now I could get 3G and service (good news), however if I go back to LTE/CDMA I never get to 4G. Still researching
Click to expand...
Click to collapse
What Hboot and radios?
Sent from my Nexus 4 using Tapatalk
acejavelin said:
What Hboot and radios?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
HBOOT 2.28.0000
Radio 2.23.10.0123r/2.23.10.0124r
OpenDSP (not sure if its needed, but here it is) 14.6.0.7708.00.0507
Thanks,
Rodrigo
So stock and no 4G? Bad SIM maybe?
Sent from my Nexus 4 using Tapatalk
acejavelin said:
So stock and no 4G? Bad SIM maybe?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
It is weird, because I got it from Verizon yesterday (my S3 broke so I went to activet this one) and it was working ok until I flashed CM10. I won't bother to go back to verizon cause I'm getting a new phone in the next week or so, however I wish I could have 4G this few days.
rhaces said:
It is weird, because I got it from Verizon yesterday (my S3 broke so I went to activet this one) and it was working ok until I flashed CM10. I won't bother to go back to verizon cause I'm getting a new phone in the next week or so, however I wish I could have 4G this few days.
Click to expand...
Click to collapse
i know this sounds odd but the rezound acts weird with verzion if the Android OS on stock was not activated with that sim.... are you s-on
REV3NT3CH said:
i know this sounds odd but the rezound acts weird with verzion if the Android OS on stock was not activated with that sim.... are you s-on
Click to expand...
Click to collapse
I'm S-Off, I was S-on with CM10 and had to do an S-Off to go back to stock. Not sure if it is possible to go back to S-On? could that fix it?
rhaces said:
I'm S-Off, I was S-on with CM10 and had to do an S-Off to go back to stock. Not sure if it is possible to go back to S-On? could that fix it?
Click to expand...
Click to collapse
you can but will not fix it and is complicated to do...what version of cm10 are you on...may just be the build as certain cm10 builds had the issue