ok so I was running viper 4g 1.0.0.0 and everything was working fine. I then decided to flash cm10, the 8.20.2012 build, and I ran that for a few hours, everything worked great and I loved how fast the Rom was. Long story short I was browsing the web this morning and suddenly my radio shuts off, I wait a moment and then it turns back on, then shuts off and turns on intermittently. I get annoyed after 20-30mins of this so I restore my backed up viper Rom. Well now the radio on this isn't working either....someone help me please!! I also know sprint is doing work on towers and I live in the san antonio area, but I know its not them cause I'm posting this from my girlfriends EVO 3d! HELPPPPPPPPPPPPPP!!!!!!!!!!
what do u mean radio?? your 3g your wifi.. gps..?? or radio u listin 2??
My 3g,1x, data or no data...it doesn't work
Sent from my EVO
sho0z said:
ok so I was running viper 4g 1.0.0.0 and everything was working fine. I then decided to flash cm10, the 8.20.2012 build, and I ran that for a few hours, everything worked great and I loved how fast the Rom was. Long story short I was browsing the web this morning and suddenly my radio shuts off, I wait a moment and then it turns back on, then shuts off and turns on intermittently. I get annoyed after 20-30mins of this so I restore my backed up viper Rom. Well now the radio on this isn't working either....someone help me please!! I also know sprint is doing work on towers and I live in the san antonio area, but I know its not them cause I'm posting this from my girlfriends EVO 3d! HELPPPPPPPPPPPPPP!!!!!!!!!!
Click to expand...
Click to collapse
Are you on the latest radio version? If not, try updating it:
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO LTE
Someone help please!
Did you follow the proper steps to go back to a sense Rom?
I have yet to do it but the part about using superwipe and flash image gui seem pretty important
Sent from my EVO using xda app-developers app
premo15 said:
Are you on the latest radio version? If not, try updating it:
http://forum.xda-developers.com/showthread.php?t=1704612
Sent from my EVO LTE
Click to expand...
Click to collapse
I have been on these radios since before the roms I was using. But I reflashed them hoping it would do the trick, and it didn't. Still not working.
00mred00 said:
Did you follow the proper steps to go back to a sense Rom?
I have yet to do it but the part about using superwipe and flash image gui seem pretty important
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
The problem started before I flashed back to viper
sho0z said:
I have been on these radios since before the roms I was using. But I reflashed them hoping it would do the trick, and it didn't. Still not working.
Click to expand...
Click to collapse
Could be a bad device. I would restore to stock and take it in under warranty.
Sent from my SCH-I535 using xda premium
Restore your phone from a backup you do have a backup.
Sent from my MEAN LTE
Forgive me if I am wrong but it doesn't work that way when going to cm10 or back
I thought it was a mandatory deal to flash the cm10 boot IMG prior to flashing cm10 and flashing sense Rome boot IMG prior to going back to a sense Rom
Like I said...highly possible I am wrong but I recall reading that
Sent from my EVO using xda app-developers app
My 3g has been cutting out alot too. Sometimes I have to go to settings and turn off the radio and turn it back on. I'm not on cm10. Could be network rather than phone.
Sent from my EVO using xda premium
Related
Hi I have the EVO V 4g, I rooted it, flashed TWRP 2.2 and when I flash CM9 or CM10 it gets installed and then when it boots I get stuck on the loading screen animation. It keeps spinning and nothing happens.
I can flash my stock rom without any trouble but for some reason I can't get anything else to work.
What gives?!
BTW I tried using Goo Manager too and I'm having the same problem.
Thank you for your time!
You need s-off to flash the kernel, or flash it with fastboot.
sudo passwd root
KossKnowsKarate said:
Hi I have the EVO V 4g, I rooted it, flashed TWRP 2.2 and when I flash CM9 or CM10 it gets installed and then when it boots I get stuck on the loading screen animation. It keeps spinning and nothing happens.
I can flash my stock rom without any trouble but for some reason I can't get anything else to work.
What gives?!
BTW I tried using Goo Manager too and I'm having the same problem.
Thank you for your time!
Click to expand...
Click to collapse
What hboot are you on?
I don't have s off. so I can still get cm9 thru fastboot?
my hboot is the one that comes with the evo v. 1.4 or 1.5 don't remember.
KossKnowsKarate said:
I don't have s off. so I can still get cm9 thru fastboot?
my hboot is the one that comes with the evo v. 1.4 or 1.5 don't remember.
Click to expand...
Click to collapse
Well you need to be S-OFF. Also for Evo V 4G I think you need to be on 1.04 Hboot http://forum.xda-developers.com/showthread.php?t=1703070 see the "HTC EVO V users" section.
Man this is getting out of hand. So many things to do. I'm kinda scared to s off and downgrade. I thought you only needed to root... HTC...
Sent from my HTCEVOV4G using xda app-developers app
We can only show you the path, you have to walk it.
Sent from my Nexus 7 using XDA Premium HD app
All I want is a stock jelly bean on my phone. HTC make good hardware but their version of android is atrocious. Truly a disgrace. Too bad virgin don't have a nexus device.. I guess I'm stuck with what I have...
Sent from my HTCEVOV4G using xda app-developers app
I have the same phone as you.
A hour after I bought the phone, I was s-off, flashing all sorts of hboots, flashing different firmware, installing different kernels, flashing roms... You are not stuck with what you have lol.
I ran jb for a couple days. No camera was a deal breaker.
sudo passwd root
And then there's that there's not even a decent jelly bean Rom. Oh well I guess I'll just wait a little bit. No camera or no wifi or no sound. Another thing is that I've never done this before this is the first time I've rooted a phone and I am the kind of scared to proceed. Linux is a bit over my head and to be honest all this flashing ROM s fast booting was a bit overwhelming... And to think that in order to downgrade your hboot you have to technically brick your phone.
Not to mention I saw this guy on YouTube showing how he was running cm nine with anthrax kernel and how it was so great and fast made me want to do that too. He said it took him over a month to do all that...
I'll stop...
Sent from my HTCEVOV4G using xda app-developers app
KossKnowsKarate said:
And then there's that there's not even a decent jelly bean Rom. Oh well I guess I'll just wait a little bit. No camera or no wifi or no sound. Another thing is that I've never done this before this is the first time I've rooted a phone and I am the kind of scared to proceed. Linux is a bit over my head and to be honest all this flashing ROM s fast booting was a bit overwhelming... And to think that in order to downgrade your hboot you have to technically brick your phone.
Not to mention I saw this guy on YouTube showing how he was running cm nine with anthrax kernel and how it was so great and fast made me want to do that too. He said it took him over a month to do all that...
I'll stop...
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
You could get everything done within a few hours... if you're on 1.40 or 1.50 you don't have to brick to downgrade. Just S-OFF and then flash the older hboot.
CM9 is pretty stable and has everything working except 3D. CM10 is pretty stable, just doesn't have camera among other bugs.
I'm on hboot 1.57. Do I have to brick that or is it the same as 1.50?
Sent from my HTCEVOV4G using xda app-developers app
I finally did the guys I am running Cm 10 jelly bean and it's running so smoothly and flawlessly that I m so reluctant to switch over to my HTC Harmonia. Camera doesn't work and there's some major problems going into town video playback everything else is just lightning fast and totally smooth I just love that ROM I hope they um keep pushing work on it so that its ready because it's almost perfect. I just wanna thank everyone for helping me out here and I'm posting this thread thank you I really appreciate it
Sent from my PG86100 using xda app-developers app
KossKnowsKarate said:
I finally did the guys I am running Cm 10 jelly bean and it's running so smoothly and flawlessly that I m so reluctant to switch over to my HTC Harmonia. Camera doesn't work and there's some major problems going into town video playback everything else is just lightning fast and totally smooth I just love that ROM I hope they um keep pushing work on it so that its ready because it's almost perfect. I just wanna thank everyone for helping me out here and I'm posting this thread thank you I really appreciate it
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I knew you wouldn't give up, the want out ways the risks, now you have to take what you learned and pass it on, I'm going to give you your first thanks, thanks for walking the path.
I said hardest part was I'm getting that wire thing for the S OFF. And finishing up with those commands that was really confusing. I'm the only thing I couldnt manage to do is to get my PRL update which is a bummer but what can you do.
BTW I'm running Gangnam CM 10. The ROM is amazing. Everything works except for the camera but I'm sure they'll add that pretty soon. Too bad I can't post in those forums heh.
Thanks again.
Sent from my EVO V 4 using xda app-developers app
Two more posts and your in.
Yeah lol. Next step for me is to get involved in development. Where do I start lol?
Sent from my PG86100 using xda app-developers app
If you're s-on, flash the kernel of the rom via fastboot and you'll be fine.
Put the boot.img from the rom.zip in your adb folder.
type in cmd (when phone is in fastboot usb (bootloader > fastboot)):
fastboot flash boot boot.img
exg. fastboot flash boot c:\Users\yourname\boot.img
(my adb folder is in my user directory)
I already spent my whole Friday night doing the s-off. Its done lol. Thanks tho
EVO V 4G Running Gangnam CM10
KossKnowsKarate said:
Yeah lol. Next step for me is to get involved in development. Where do I start lol?
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
I think the stickies in the themes and apps section has links to some good tutorials.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Hey guys, I have a radio related question.
I'm running [SP]Jester and Liquids ROM. (Found in Newsworthy Post)
I can't seem to hold a signal.
It says 3G but its grey, rather than lit up in blue and things either load slowly or not at all.
If I turn on Wi-Fi, the Wi-Fi bars light up blue and so do the 3G bars... but it goes back grey when I turn Wi-Fi back off.
I'm running the OTA radio that is recommended in the OP, which is the 2.11.605.19 radio.
Also, I've checked my settings and mobile data is turned on.
Any help, pretty please with a beard and stache on top?
Sent from my Thunderbolt using xda premium
Update, it dropped to 1x and lit up in blue. Now its up to 3G lit up in blue.
Wtf?
Sent from my Thunderbolt using xda premium
Does your area have regular signal issues?
I'm not sure if they ate related but I was messing with some toggles and somehow switched my phone to cdma only mode. I just went into the 4g toggle app and switched it back to lte/cdma auto prl and that got me back to 4g.
Sent from my Thunderbolt using Tapatalk 2
derbking7 said:
Does your area have regular signal issues?
I'm not sure if they ate related but I was messing with some toggles and somehow switched my phone to cdma only mode. I just went into the 4g toggle app and switched it back to lte/cdma auto prl and that got me back to 4g.
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
Nah, normally its fine. I maintain 2 to 3 bars of 3G in my area.
That setting was correct in my phone.
Its working for now... I just hope it stays that way.
Sent from my Thunderbolt using xda premium
I'm having the same issue. I'm new to this, and don't know much about radios. I'm running the I've only flashed roms never a radio, so I guess I'm running stock. Is it safe to flash the radio after the ROM is installed, or do I need to start with a radio flash and then flash the ROM again?
Sent from my Thunderbolt using xda app-developers app
jimmydmorgan said:
I'm having the same issue. I'm new to this, and don't know much about radios. I'm running the I've only flashed roms never a radio, so I guess I'm running stock. Is it safe to flash the radio after the ROM is installed, or do I need to start with a radio flash and then flash the ROM again?
Sent from my Thunderbolt using xda app-developers app
Click to expand...
Click to collapse
Flash the ROM first.
If your signal isn't affected after flashing a new ROM, there is usually no need to flash another radio.
Is the baseband version 1.49.00.0406w_1, 0.01.79.0331w_1?
What ROM are you running?
Yeah, that's the baseband version I have. I'm running liquid ics know mr2v7. My signal has been ok today, but I have noticed quite a few data drops, and times where the icon says I have data, but no app can get online...
Sent from my Thunderbolt using xda app-developers app
jimmydmorgan said:
Yeah, that's the baseband version I have. I'm running liquid ics know mr2v7. My signal has been ok today, but I have noticed quite a few data drops, and times where the icon says I have data, but no app can get online...
Sent from my Thunderbolt using xda app-developers app
Click to expand...
Click to collapse
That's exactly what I am experiencing.
Also that is the 2.11.605.19 radio that has been tested with this, so I don't THINK any other radio will be worth trying.
Some people have had better luck running this ROM with the combo radio found here:
http://forum.xda-developers.com/showthread.php?t=1864157
I have yet to try the combo radio though since I haven't updated to the newest release for this ROM. I'm still running the public test... just too lazy to reset my settings right now. Lol.
If you are going to try out the combo radio, remember to take the current radio off of the root of your SD card before flashing to the new one. Either just delete it right then and there from the root, or move it into another folder off of the root.
Also, if you do try it out, let me know how it comes out for you.
Actually, if you've NEVER flashed a radio before, you most likely won't have a radio (PG05IMG.zip) file on the root of your SD card.
But if for whatever reason you do, move that file somewhere else and off of the root.
Download the new one and place it on the root.
Rename that file to PG05IMG.zip
Turn off your device.
Hold volume down and power until the bootloader loads up.
It should automatically scan for updates.
It will prompt you that there is an update.
Press volume up to update.
DO NOT POWER OFF THE DEVICE UNTIL THE UPDATE HAS COMPLETED!!
Once it has completed successfully, reboot your device and enjoy you're new radio.
[Posted directions in case you needed them]
Thanks! I was just about to post that I didn't have the zip file on my sd card. My battery is about to go, so I will try this tomorrow!
Sent from my Thunderbolt using xda app-developers app
jimmydmorgan said:
Thanks! I was just about to post that I didn't have the zip file on my sd card. My battery is about to go, so I will try this tomorrow!
Sent from my Thunderbolt using xda app-developers app
Click to expand...
Click to collapse
No problem.
Let me know how the combo radio works for you.
If the combo radio doesn't work as well as the current radio you have now, you can always revert back to it.
The current radio you're running is found here:
http://forum.xda-developers.com/showthread.php?t=1605557
Just follow the same steps that I gave you above.
Only difference is that you WILL have a PG05IMG.zip file on the root of your SD.
Just be sure to move it into another location that is off of the root before you change radios again.
Then follow the steps to flashing a radio that I gave you in the above post.
Good luck!
RBarnett09 said:
Actually, if you've NEVER flashed a radio before, you most likely won't have a radio (PG05IMG.zip) file on the root of your SD card.
But if for whatever reason you do, move that file somewhere else and off of the root.
Download the new one and place it on the root.
Rename that file to PG05IMG.zip
Turn off your device.
Hold volume down and power until the bootloader loads up.
It should automatically scan for updates.
It will prompt you that there is an update.
Press volume up to update.
DO NOT POWER OFF THE DEVICE UNTIL THE UPDATE HAS COMPLETED!!
Once it has completed successfully, reboot your device and enjoy you're new radio.
[Posted directions in case you needed them]
Click to expand...
Click to collapse
It's a good idea to move the zip to another folder or rename it after flashing the radio. Saves you from getting stuck if you can't get to recovery
Sent from my Thunderbolt using Tapatalk 2
Rickerson said:
It's a good idea to move the zip to another folder or rename it after flashing the radio. Saves you from getting stuck if you can't get to recovery
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
I usually delete the radios .zip file once it has been flashed and tested.
That way I know it won't mess me up later.
Sent from my Thunderbolt using xda premium
At the first few replies: I had the same issues on .19, the combo leak fixed it all but takes a while to first acquire a signal. It's solid after that.
I'm having terrible 4g issues. i got a replacement thunderbolt a little while back and flashed eternity which im not too happy with on there. but i never flashed a new rom because i was told that the new radios on the most current hardware would supprt it. sure enough it did but the 4g doesnt work like its supposed to. just goes in and out and stuff
since i'm not too good with radios i need to know which one would be the best to flash. and why if someone doesnt mind explaining it to me. thanks!
Willis_G said:
I'm having terrible 4g issues. i got a replacement thunderbolt a little while back and flashed eternity which im not too happy with on there. but i never flashed a new rom because i was told that the new radios on the most current hardware would supprt it. sure enough it did but the 4g doesnt work like its supposed to. just goes in and out and stuff
since i'm not too good with radios i need to know which one would be the best to flash. and why if someone doesnt mind explaining it to me. thanks!
Click to expand...
Click to collapse
Are you currently running the most updated 605.19 stock radios?
You ARE if you go to settings, about phone, software information, more, and the baseband version reads 1.49.00.0406w_1, 0.01.79.0331w_1
If these are not the numbers you see, flash these radios from here:
http://forum.xda-developers.com/showthread.php?p=24992678
If these are the numbers you see, then it should be working properly. If not, you may have installed an older version of Eternity. Check to make sure you flashed the most updated one.
Or the 4G in your area may be simply going in and out. Try flashing another ROM to verify this.
Sent from my ADR6400L using xda premium
RBarnett09 said:
Are you currently running the most updated 605.19 stock radios?
You ARE if you go to settings, about phone, software information, more, and the baseband version reads 1.49.00.0406w_1, 0.01.79.0331w_1
If these are not the numbers you see, flash these radios from here:
http://forum.xda-developers.com/showthread.php?p=24992678
If these are the numbers you see, then it should be working properly. If not, you may have installed an older version of Eternity. Check to make sure you flashed the most updated one.
Or the 4G in your area may be simply going in and out. Try flashing another ROM to verify this.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Thank you bro! i'm going to start messing with this and checking everything. and i'll probably reflash too. i've been wanting to for a while but i think im going back to bamf. i ran bamf for over a year and really liked it
Willis_G said:
Thank you bro! i'm going to start messing with this and checking everything. and i'll probably reflash too. i've been wanting to for a while but i think im going back to bamf. i ran bamf for over a year and really liked it
Click to expand...
Click to collapse
I run Gingeritis3D and still love it. I tried running BAMF Forever 1.10 but it was too laggy, even after changing kernels. Just keep flashing and find out what you like.
Sent from my ADR6400L using xda premium
RBarnett09 said:
I run Gingeritis3D and still love it. I tried running BAMF Forever 1.10 but it was too laggy, even after changing kernels. Just keep flashing and find out what you like.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
I just did the LiquidSmooth-ICS-v1.5-MR3
and have no data now. Im trying to determine what the best radios are for this. does anyone have ideas?
The .19 radios works best for me. Have you tried toggling data on and off or putting it into airplane mode for a minute and taking it back out.
Sent from my Thunderbolt using Tapatalk 2
disconnecktie said:
The .19 radios works best for me. Have you tried toggling data on and off or putting it into airplane mode for a minute and taking it back out.
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
.19? i guess i dont understand
605.19 is the name of the radios. Not the entire name but the last 5 digits of the radio name are usually what we go by.
Sent from my Thunderbolt using Tapatalk 2
disconnecktie said:
605.19 is the name of the radios. Not the entire name but the last 5 digits of the radio name are usually what we go by.
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
cool man well i dug threw the thread and found the radios that other people flashed. and ran those threw the phone. still have sketchy 4G but if i keep it on cdma only and run permanent 3g its smooth, just not super fast like i wish.
does anyone know a specific LTE only radio i can flash in that they have had success with running the ICS Roms?
Willis_G said:
cool man well i dug threw the thread and found the radios that other people flashed. and ran those threw the phone. still have sketchy 4G but if i keep it on cdma only and run permanent 3g its smooth, just not super fast like i wish.
does anyone know a specific LTE only radio i can flash in that they have had success with running the ICS Roms?
Click to expand...
Click to collapse
I'm pretty sure the LTE radios they used were from the 2.11.605.19 OTA. They may have flashed a different CDMA radio, but Idk. The leaked LTE radio causes most phones to reboot a lot.
Here's a link to the combo radios though. I suppose it never hurts to try them out... the outcome varies by phone.
http://forum.xda-developers.com/showthread.php?p=30974567
But it is still recommended to use the 2.11.605.19 radios... which I posted a link for them above.
Sent from my ADR6400L using xda premium
RBarnett09 said:
I'm pretty sure the LTE radios they used were from the 2.11.605.19 OTA. They may have flashed a different CDMA radio, but Idk. The leaked LTE radio causes most phones to reboot a lot.
Here's a link to the combo radios though. I suppose it never hurts to try them out... the outcome varies by phone.
http://forum.xda-developers.com/showthread.php?p=30974567
But it is still recommended to use the 2.11.605.19 radios... which I posted a link for them above.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Cool bro, thanks alot. its funny you mentioned the autoreboot, the phone did it once to me already.
I will experiment with LTE radios and keep flashing until i find something that works good.
Willis_G said:
Cool bro, thanks alot. its funny you mentioned the autoreboot, the phone did it once to me already.
I will experiment with LTE radios and keep flashing until i find something that works good.
Click to expand...
Click to collapse
I've even had luck with the old 2.11.605.9 radios.
Try them if you'd like.
http://forum.xda-developers.com/showthread.php?t=1396408
Just be careful flashing different radios. If you flash a bad radio, it can brick you.
Also, I was always told to never flash the same radio that is already installed. So if you flash the .9 radios and they are currently installed, don't flash them again until you flashed a different radio.
Sent from my ADR6400L using xda premium
I flashed miui and at first the WiFi didn't work but 3G did. Now its the opposite and its not just with this rom its every rom I install. I tried to return it to stock with the ruu but it gives me an error every time. Whats wrong with it and what do I need to do?
Sent from my PG86100 using xda app-developers app
Are you cdma or gsm? Also what radios are you on? What kind of error are you getting when you attempt to flash an ruu?
Cdma I don't know what the radio is and I am at school right now so I can tell you that in a few hours. If this helps anything I have a screen shot of the about phone screen.
Sent from my PG86100 using xda app-developers app
Ok you have the latest firmware. 1.09.000.0706 is the latest. Also if you downloaded the jb muiu the dev states that wifi and camera are borked, then he released another update today with all that fixed. So when you get a chance download it and see if it works for you.
Diizzymatt said:
Cdma I don't know what the radio is and I am at school right now so I can tell you that in a few hours. If this helps anything I have a screen shot of the about phone screen.
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
That happens to she sometimes ....slide down your status bar and select Toggles and disable data for a few seconds and then turn it on again and see if your data comes back..if it doesn't work try to do a Prl update I don't know if miui allows OTA update ,if not you will need to go back to a stock ROM or use QPST to update it .I am flashed to cricket so I'm used to days drops lol
---------- Post added at 12:44 AM ---------- Previous post was at 12:38 AM ----------
Jsparta26 said:
Ok you have the latest firmware. 1.09.000.0706 is the latest. Also if you downloaded the jb muiu the dev states that wifi and camera are borked, then he released another update today with all that fixed. So when you get a chance download it and see if it works for you.
Click to expand...
Click to collapse
Just flash the buttered toast v6 kernel and it fixes those problems
I have the ics one and the problem isn't the WiFi its the 3G now. The first time I flashed it the WiFi didn't work. But now its like that on every Rom I flash
Sent from my PG86100 using xda app-developers app
I have the same problem, cannot use 3G or 3G+ internet from my sim, only setting it on GSM Only gives me the opportunity to use internet from my sim card... I played with different roms lately so see which one I prefer most, and at some point, unfortunately cannot remember which one I was installing, I encountered this problem, and it has remained even though I have tried other roms... Anyone have any suggestions, please?
Fixed it. I forgot to relock bootloader before I applied the ruu. After I got stock I had to update my profile to get 3g working again.
Sent from my PG86100 using xda app-developers app
I am giving this phone to my friend, and he needs to activate it on his account. It doesn't work doing it on the rom that I have. So I just need a link to the stock rom that actually works. All the links I have found are dead. My device is S-OFF. Thanks in advance!
Its not pure stock, but you can activate and update prl and profile
Harmonia
http://www.vmroms.com/index.php?topic=157.0
Sent from my Evo 3D CDMA using xda app-developers app
Gah! It's stuck at the boot screen. I realized after that my battery is low though. Also I'm using EXT 1.0.0.5 RC 3, and RC 5 is out so I'm going to charge my battery, and update my recovery. Perhaps then it will actually boot haha.
That ROMs been around for a while, so an old recovery should work fine. The ROM also boots any hboot
Sent from my Evo 3D CDMA using xda app-developers app
I updated 4EXT, and I still am getting stuck on boot. I have wiped everything and tried installing multiple times. If it works on any HBOOT then I don't know what my problem is. Last I had on it was PAC Rom 4.3.
I'll keep messing around and try to get it to work. I'm not new to flashing roms by any means, but HTC devices are always so finicky.
You could try flashing boot.img through fastboot.
Check md5 to ensure a good download
Sent from my Evo 3D CDMA using xda app-developers app
Thank you! I don't know why I didn't think of that. It is actually working now. I appreciate you working with me on this issue. Now I can get it activated and switched back to PAC. My friend thanks you as well.