This thread is to help people hellraise a GT-I9100 Jellybean 4.1 rom for use on our AT&T Galaxy S2 SGH-I777.
Get what you need as of August 1, 2012:
1.) Download a Jellybean 4.1 or 4.1.1 rom from the GT-I9100 forums. (NOTE: do not use from the I9100G, the hardware is different)
http://forum.xda-developers.com/forumdisplay.php?f=1055
2.) Download a JB compatible SGH-I777 kernel. The following have compatible versions:
- Dream Kernel ( http://forum.xda-developers.com/showthread.php?t=1788148 )
- Siyah Kernel ( http://forum.xda-developers.com/showthread.php?t=1592228 )
3.) Download a CM9 SGH-I777 modem (this is AOSP based and needs a CM modem)
http://forum.xda-developers.com/showthread.php?t=1336958&highlight=cm7+modem
4.) Download the Hellraiser zip I have attached to this post. This adds the needed keylayout and lib files for the SGH-I777.
Move the files to your internal SD card on your phone.
INSTALL ORDER:
1.) Boot into CWM recovery and do a Wipe/Factory Reset, Wipe Cache, Wipe Dalvik Cache, Format System.
2.) Install the Jelllybean GT-I9100 rom zip (Note: if the rom uses AROMA installer, do not reboot after install)
3.) Install the SGH-I777 Jellybean compatible kernel.
4.) Install the Hellraiser zip from this post to get the correct keylout for you SGH-I777.
5.) Install the SGH-I777 CM modem. (all JB roms at this date are CM10 based)
6.) REBOOT and get you some Jellybeans!
Credits go to Team Skyfire for the Dream Kernel, Ktoonsez and Gokhanmoral for the Siyah Kernel, RockRatt for the modems, and drakester09 for the keylayout and lib files in the Hellraiser zip attached. Thank these awesome devs every chance you can get!!
Thanks for putting together these directions.
Does this hellraiser package also change the build id back to i777 or will it still be i9100?
Because the original ROM creator may have tweaks in the build.prop I figured it best to leave the device I'd alone.
You can manually change the build.prop to show SGH-I777 if you need it.
Sent from my smooth as butter SGH-I777.
Hey ts, thanks for the great tutorial. Just a question, has anyone successfully ported a JB rom with this tool?
Sent from SGS2 i777.. be prepared for typo.
bb_hershey said:
Hey ts, thanks for the great tutorial. Just a question, has anyone successfully ported a JB rom with this tool?
Sent from SGS2 i777.. be prepared for typo.
Click to expand...
Click to collapse
Yes, I'm currently using the 20120801 release from GT-I9100 CM10 thread from below. I did have to change the build.prop before it would flash via CWM. The easiest way I found to do that was to run it through Flash-aholicsTool and just check mark strip out device specific script calls and change device name to I777. (I did not check Hellraise option) Then follow the directions in the OP.
http://forum.xda-developers.com/showthread.php?t=1794758
I am on my 3rd GT-I9000 JB ROM and I use this method. It is not a tool just an easy way to add the proper key layout and libs for SGH-I777.
I manually select the build.prop with Root Explorer to edit in text editor.
Sent from my smooth as butter SGH-I777.
Just wanting to verify if I'm using a GT-I9000 JB ROM that is hellraised would I use a kernel WITH mic swap or WITHOUT?
I'm assuming that it would be WITH mic swap.
Thanks.
loughary said:
Just wanting to verify if I'm using a GT-I9000 JB ROM that is hellraised would I use a kernel WITH mic swap or WITHOUT?
I'm assuming that it would be WITH mic swap.
Thanks.
Click to expand...
Click to collapse
With mic swap is for AOSP based like CM10 or for a GT-I9100 ROM.
Without mic swap is only for AT&T leaks/ROMs like LE5 or LD3.
Sent from my smooth as butter SGH-I777.
Instalation aborted!
Hello my friends, i followed all the tutorial, but when i will install the Jelllybean GT-I9100 rom zip i get this erro message:
Error in /sdcard/cm-10-20120801-EXPERIMENTAL-i9100-CODEWORKX.zip
(Status 7)
Instalation aborted.
My galaxy S2 is the i777 from AT&T and i think i did all the tutorial right!
What do you think is going on?
Thank you!
Using Entropys ICS Hellraiser, I packed it with The Dream JB Kernel and a new modem. So all you have to do is flash this after you flash a i9100 ROM and it does everything for you http://db.tt/dEfrVjGB
binhosccx said:
Hello my friends, i followed all the tutorial, but when i will install the Jelllybean GT-I9100 rom zip i get this erro message:
Error in /sdcard/cm-10-20120801-EXPERIMENTAL-i9100-CODEWORKX.zip
(Status 7)
Instalation aborted.
My galaxy S2 is the i777 from AT&T and i think i did all the tutorial right!
What do you think is going on?
Thank you!
Click to expand...
Click to collapse
You need to go into your build.prop and chage GT-I9100 to SGH-I777 & I9100 to I777. Or extract the build.prop from the cm10 zip and replace the one in your phone with it.
motoman22x said:
Using Entropys ICS Hellraiser, I packed it with The Dream JB Kernel and a new modem. So all you have to do is flash this after you flash a i9100 ROM and it does everything for you http://db.tt/dEfrVjGB
Click to expand...
Click to collapse
This solution will work and is essentially the same as what I described in the OP.
My method is just a bit longer with the exception of choice in the future of newer kernels and modems that may be created.
As for the status 7 error...you need to unzip the JB ROM you have chosen and edit out any device scripts in the install that check for a GT-I9100 OR you need to edit your current ROM's build.prop to show GT-I9100 instead of SGH-I777 BEFORE you reboot into recovery to flash the JB ROM.
Some ROMs have a device script that verifies you are flashing to the "proper" device.
Sent from my smooth as butter SGH-I777.
Or he could've just googled i777 status 7 error.
Sent from my SGH-I777 using Tapatalk 2
Phalanx7621 said:
Or he could've just googled i777 status 7 error.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Yes, you are right...but it never hurts to help someone along.
Sent from my smooth as butter SGH-I777.
I tried to flash RR_Jelly_Bean_V3.0.1_Aroma with instraction first post but all time it hanging on RR bootanimation. I tried defoult, light version , same problem.
Before flashing wiped all and format system.
After flashing tried wipe cashe and dalvic cashe, same.
fakhri said:
I tried to flash RR_Jelly_Bean_V3.0.1_Aroma with instraction first post but all time it hanging on RR bootanimation. I tried defoult, light version , same problem.
Before flashing wiped all and format system.
After flashing tried wipe cashe and dalvic cashe, same.
Click to expand...
Click to collapse
Make sure you're using the right kernel. JB compatible not just an ICS kernel.
rk249 said:
Make sure you're using the right kernel. JB compatible not just an ICS kernel.
Click to expand...
Click to collapse
Kernel is Siyah 3.5.1, as mentioned in first post.
fakhri said:
Kernel is Siyah 3.5.1, as mentioned in first post.
Click to expand...
Click to collapse
Did you get the Siyah CM10 Test Kernel or the normal ICS 3.5.1 version? I would bet the 3.5.1 ICS version. My apologies...I should have been more specific.
As far as I can tell, the Siyah kernel generated by Ktoonsez for the SGH-I777, has separate ICS and JB versions. The GT-I9100 Siyah kernel is version 3.5.2 and seems to be for BOTH ICS and JB roms but that is only for that phone.
At this time, Ktoonsez' Siyah has mic swap and no mic swap versions for ICS 3.5.1 but the CM10 test kernel seems to be without mic swap, which would cause your call audio to be low since the top mic is being used instead of the bottom mic. Without mic swap is only for AT&T leaked roms (and we all know AT&T won't be releasing JB to us anytime soon). Please go thank or donate to Ktoonsez anyway because you know he will be on top of this in the future. http://forum.xda-developers.com/showthread.php?t=1592228
I would highly recommend the Dream kernel WITH mic swap. This should fix your problem. Don't forget to Thank or Donate to Team Skyfire if you use their kernel. http://forum.xda-developers.com/showthread.php?t=1788148
I am using the 2.6.9 version of the Dream kernel (with mic swap) with great results. For some reason, which is explained in their thread, 2.6.9 is actually newer than their 3.2.9 version. Something to do with the TWRP recovery for one and not the other.
Please let us all know your results using the proper kernel.
Thank You very match. I flashed Dream kernel and it works fine.
Thanks for your grate jobs.
Hailraising i9100 SuperNexus rom
Hi,
Can someone please help me hailraising the Supernexus rom released yesterday in i9100.
link : http://forum.xda-developers.com/showthread.php?t=1810042
I tried to hailraise it using the scripe you provided. When I tried to install it failed with bunch of build.prop mismatch and status 7 error. So as suggested earlier, I extracted its build.prop and edited it to match our device, but still it fails with same error. My proficieny in this area ends here and don't know what else to do here !!
I'm really interested in this build, as this is the only rom thats not based on cm10 exp build , but its made from the aosp source code directly and thus I hope it solves my media scanner issue and I could have a jb rom to work with.
Thanks !!!
Related
I didn't want to have this get lost in my other threads so I decided to make a new one.
These kernel's have the necessary in-call patch to work for our phones. I have attached a flashable zip so you can flash the I9100 ROM (Only for LPH based ROMs) of your choice and then flash this kernel.
LPQ for MIUIv4 2.3.23 - With NO Screen on/off bug (GO THANK ENTROPY FOR SHARING THE SCREEN ON/OFF BUG FIX)
http://www.mediafire.com/?dudijtd8tfv0a40
Download Siyah Alpha 4 LPH Kernel
http://www.mediafire.com/?bpgwjlwxbip0530
Download Siyah Alpah 5 LPJ Kernel
http://www.mediafire.com/?h896v0a6k6f3nc9
Download Stock LPH Kernel
http://www.mediafire.com/?f975cdr387e2f15
Download Stock LPQ Kernel
http://www.mediafire.com/download.php?7acfc0r5df142d1
Samsung based Modems Link
http://forum.xda-developers.com/showthread.php?t=1361393
CM7/MIUI based Modems Link
http://forum.xda-developers.com/showthread.php?t=1336958
Steps
1. Do usual wipes
2. Flash a I9100 ROM that is LPH based (pretty sure it is only Sammy based ROM's right now)
3. Flash my kernel.
4. Flash a Modem from our I777 collection.
4. Reboot.
LPQ ROM's verified working on with LPQ kernel
1. CriskeloServanTeam V05
Sammy ROM's verified working on with stock kernel (Thanks cjsabaki)
1. Wanam lite ics rom (has a phone apk with no noise suppression)
2. ICS resurection (It is flawless, has everything working, including: camera, video, usb, external_sd)
AOSP ROM's verified working on with Siyah kernel (Thanks cjsabaki)
1. MIUI v4
2. CM9
3. AOKP Hydro1.5 ROM
4. Bezke's AOKP build
This does not fix the in-call Noise Suppression issue, that is a modification to Phone.apk so be forewarned
Click "Thanks" if you like what you see or donate with my link.
See Entropy's thread/links here that showed me the way to getting the kernel to work on our phone:
http://forum.xda-developers.com/show....php?t=1512900
http://forum.xda-developers.com/show...&postcount=204
http://forum.xda-developers.com/show...8&postcount=26
reserved.....
Are any of these modded pics kernels overclockable?
Sent from my GT-I9100 using xda premium
Smacdallas said:
Are any of these modded pics kernels overclockable?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Haven't tried, give it a try let us know.
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
cjsabaki said:
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Thanks for the reminder about modem, adding to OP.
probably a dumb question, but screen still flash on and still only 2 of the keys work?
PuffinNugz said:
probably a dumb question, but screen still flash on and still only 2 of the keys work?
Click to expand...
Click to collapse
Same issues till we get source
kinda figured, but was just hoping...
This is the same kernel from your CM9 thread, right?
cjsabaki said:
For the brave... wanam lite ics rom has a phone apk with no noise suppression. And wescrips ics resurection is flawless.
Remember to flash i777 modem of choice after flashing Ktoonsez's kernel.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
ICS Resurrection is pretty darn nice so far. I'm pleasantly surprised. Thanks for the kernel to make this possible, ktoonsez!
Sent from my GT-I9100 using xda premium
eep2378 said:
This is the same kernel from your CM9 thread, right?
Click to expand...
Click to collapse
No, CM9 is sitll on LP6.
ktoonsez said:
No, CM9 is sitll on LP6.
Click to expand...
Click to collapse
Ok thanks, I'm staying on AOKP for now
gonna try this out
I'm gonna try this out but want to make sure I flash the correct modem. Where do I get the KJ4 modem that will work for LPH releases? I've found the Modem post in the original development section and the CM9 modems that task650 posted in the CM9 i777 post. I'd appreciate anybody's proper guidance.
I tried Siyah's ICS 3.0alpha3 for just testing fun last night (knowing calls won't work - just playing), and it had a much smoother scrolling/UI screen feel to it. Would it be possible for you (ktoonsez) to combine / share your collected mods on getting the ICS kernel to work on our i777 phones with gokhanmoral, so he could offer up a Siyah version for our phones? Just wondering... thanks... appreciate all you do for us man!
mpkothari said:
I'm gonna try this out but want to make sure I flash the correct modem. Where do I get the KJ4 modem that will work for LPH releases? I've found the Modem post in the original development section and the CM9 modems that task650 posted in the CM9 i777 post. I'd appreciate anybody's proper guidance.
Click to expand...
Click to collapse
Take your preferred modem from here : http://forum.xda-developers.com/showthread.php?t=1361393
Then follow op instructions. Basically, Wipe data, flash ICS LPH rom of your choice, flash gapps, flash this kernel, flash your modem, reboot
FYI, I flashed Westcrip's rom earlier this morning using the above mentioned flashing process without issue. I actually prefer Bezke's AOKP look and feel so I went back
jaxf250 said:
I tried Siyah's ICS 3.0alpha3 for just testing fun last night (knowing calls won't work - just playing), and it had a much smoother scrolling/UI screen feel to it. Would it be possible for you (ktoonsez) to combine / share your collected mods on getting the ICS kernel to work on our i777 phones with gokhanmoral, so he could offer up a Siyah version for our phones? Just wondering... thanks... appreciate all you do for us man!
Click to expand...
Click to collapse
Yes I can hack his kernel so it will work with ours. Looks like he is on alpha 4 now. Does anyone know how to contact him, probably should contact him before doing it?
EDIT:
Whihk ROM or ROM's did you use it on?
Also be aware, since there are no sources yet (direct quote from his site):
Warning: this is not a compiled kernel but only a repack of cfroot kernel. only initramfs part is modified until the sources are out.
ktoonsez said:
Yes I can hack his kernel so it will work with ours. Looks like he is on alpha 4 now. Does anyone know how to contact him, probably should contact him before doing it?
EDIT:
Whihk ROM or ROM's did you use it on?
Also be aware, since there are no sources yet (direct quote from his site):
Warning: this is not a compiled kernel but only a repack of cfroot kernel. only initramfs part is modified until the sources are out.
Click to expand...
Click to collapse
Thanks that would be cool if you two could collaborate. I am currently on latest AOKP rom. Alpha 4 (whatever is most current) would be the one to integrate. I am happy to test before you release - just pm me the details. Thanks!
Sent from my GT-I9100 using xda premium
Tried Resurrection and Wanam as well as Cm9 and aokp. I liked the cm9 and akop but no adobe flash support. That's a must for me.
I'm back to Wanam now, it seemed more stable than Resurrection. It's been fun playing with these. Thanks to you guys that have made this possible.
I'll see how this does on battery over the long run now.
Sent from my GT-I9100 using xda premium
Just want to say thanks for developing and sharing this. I've been experimenting with a few different roms today thanks to this kernel. Thanks again.
Hellraiser. Same as http://forum.xda-developers.com/showthread.php?t=1335377 but for ICS. Same installation instructions, except this is for ICS Touchwiz firmwares instead of Gingerbread.
Known issues:
May break root on some firmwares. Flash ChainsDD's Superuser or Chainfire's SuperSU CWM packages in CWM to fix. To find them, Google it. Will add links later. tired now...
Doesn't change build.prop to represent I777, will cause script assert problems with CM9. I'll fix this later in the week after I've caught up on sleep.
Doesn't change wifi region codes (see Sh1tROM tutorial) for 5 GHz wifi support yet.
Sometimes region settings don't take hold on the first boot, and you need to reboot to see ringtones and proper keyboard
Tested with Foxhound someversionican't remember... Others have used other I9100 ICS firmwares.
Won't work with anything based on I9100 leaks such as XXLPJ - I believe Resurrection was in this category last week.
Having trouble with uploading large files, so:
Take the files at https://github.com/Entropy512/hellraiser_i777/tree/ics, put em' in a ZIP, and flash. I'll attach a ZIP later. I need to contact the XDA admins about some upload issues.
Change Log
04/10/2012:
Updated kernel - SUCK! 04/10/2012
04/01/2012:
Initial release
FAQ goes here
something else will go here.
Locking the thread for now as it needs major cleanup and I'm out of time. Discuss in Generla or Q&A, i'll clean this up and unlock when I catch up on sleep.
I'll keep updates here because I'm awesome like that.. :beer::beer:
Sent from my SGH-I777 using Tapatalk 2
The uploading issue I've been having with mid-size files (Hellraiser is 10MB) has been forwarded on to the server admins.
Thanks again for this!
Have uploaded the zip to mediafire assuming Entropy512 has no issues . I take no credit for this. Please thank him for this hellraiser...
I hellraised one ROM --VK-- ROM and it is working fine for me.
Link
Another Modem?
Hi Entropy512. I just hellraise FOXHOUND PsychoMantis from here and works really good, however i can't get the internet working (no data, only wifi). Should i try another modem? wich one?
Entropy you said that the package won't work on anything like xxlpj... crysis' from is based on xxlp7, so is that out of the question? Because I love that rom,, but bricked my phone hell raising a bad rom last time, and don't want to make another mistake. Thanks man!
jaguars34 said:
Entropy you said that the package won't work on anything like xxlpj... crysis' from is based on xxlp7, so is that out of the question? Because I love that rom,, but bricked my phone hell raising a bad rom last time, and don't want to make another mistake. Thanks man!
Click to expand...
Click to collapse
It works great on LP7
Sent from my SGH-I777 using xda premium
jaguars34 said:
Entropy you said that the package won't work on anything like xxlpj... crysis' from is based on xxlp7, so is that out of the question? Because I love that rom,, but bricked my phone hell raising a bad rom last time, and don't want to make another mistake. Thanks man!
Click to expand...
Click to collapse
XXLP7 is ancient, it will not work on XXLP7. It will not work on any XX build below LPQ.
If you typoed that and meant XWLP7, it should work.
You need to be VERY careful to be accurate about region codes when talking about I9100 ICS, since they replaced the month code with "P" and how far along the build code is depends on the region. XX is way up there (past Q) and Q is the first one that could be Hellraised, XW is only at 7 and all known XW region builds should be fine.
Entropy512 said:
XXLP7 is ancient, it will not work on XXLP7. It will not work on any XX build below LPQ.
If you typoed that and meant XWLP7, it should work.
You need to be VERY careful to be accurate about region codes when talking about I9100 ICS, since they replaced the month code with "P" and how far along the build code is depends on the region. XX is way up there (past Q) and Q is the first one that could be Hellraised, XW is only at 7 and all known XW region builds should be fine.
Click to expand...
Click to collapse
My mistake. All I saw was the "lp7". Didn't even know that there was an XXLP7.
Sent from my SGH-I777 using xda premium
geomax45 said:
It works great on LP7
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Hellraised Crysis rom worked fine for me.
How are you supposed to use this...I have this as .zip and F1's Galaxy Nexus stock ROM for Galaxy S II on my AT&T Galaxy S II. When I install F1's Galaxy Nexus stock ROM, it ends because it recognizes my device isn't an OG Galaxy S II.
Am I supposed to merge the Hellraiser files with the ROM files and zip them up?
If you download and flash a stock ROM such as XWLP7 and hellraise, will HDMI work? Read on previous forum that HDMI out does not work on custom ROMs.
Since this is a stock ROM from Sammi this should work. Any experience with this?
Deleted
Colton127 said:
How are you supposed to use this...I have this as .zip and F1's Galaxy Nexus stock ROM for Galaxy S II on my AT&T Galaxy S II. When I install F1's Galaxy Nexus stock ROM, it ends because it recognizes my device isn't an OG Galaxy S II.
Am I supposed to merge the Hellraiser files with the ROM files and zip them up?
Click to expand...
Click to collapse
You need to remove the script asserts from the updater-script of whatever you're trying to flash. That's probably the first firmware other than CM9 I've heard of that did any script assert checking.
rfb813 said:
If you download and flash a stock ROM such as XWLP7 and hellraise, will HDMI work? Read on previous forum that HDMI out does not work on custom ROMs.
Since this is a stock ROM from Sammi this should work. Any experience with this?
Click to expand...
Click to collapse
HDMI should work - HDMI works fine on custom firmwares, it just doesn't work right now with AOSP-based firmwares.
Will this work with xwlpf? Wanted to HR the wanam rom. Just wanna be sure
Edit: never mind, already tried it and it works just fine.
Can you post the hellraiser zip please Felix? or did you use flashoholics tool.
Sent from my SGH-I777 using Tapatalk 2
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
lingarajug said:
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Are you using the right siyah?
Bleh
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
korockinout13 said:
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
Click to expand...
Click to collapse
It does have mali
Doesn't matter what version of kernel you use from my understanding... (as long as it's for this phone)
Flashing the ROM, via CWM, will overwrite whatever kernel is installed with its own kernel.
Something is wrong, true. But I don't believe it to be Siyah or SuperNexus.
Have you tried re-downloading SuperNexus and flashing the new dl? You may have had a bad dl.
Oh, and if I'm wrong about anything, please correct me. Always willing to learn!
Clay
Team Pirate
Sent from my PINK GSwagger2
And the logcat says?
Sent from Arkham
0. Complete wipe of course.
1.Flash supernexus build 5 + gapps.
2.Reboot, Let it boot up once atleast.
3.Boot into recovery
4. wipe, dalvik cache
5. flash siyah.
6. Reboot
thank you everyone, I'm tired to see my phone go blank again, I read some posts saying siyah gives better battery life than the kernel included in the ROM, which was the reason I wanted to try it, I have tried siyah with older supernexus ROM and currently using built in kernel and notice no difference, I guess I should try it before asking it here, thanks again everyone for ur support.
Sent from my SGH-I777 using xda app-developers app
4.3.3 nomswap??
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
t7reyeslua said:
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
Click to expand...
Click to collapse
You need mswap on all JB roms...
Thanks
122ninjas said:
You need mswap on all JB roms...
Click to expand...
Click to collapse
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
t7reyeslua said:
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
Click to expand...
Click to collapse
Mswap and noMswap effects people hearing you not you hearing them
4.1.2 JB ROM PORTING steps from I9100 to SGH-I777
I tried the below, so thought of sharing the steps to port I9100 ROMS to SGH-I777 ,
Download NeatRom/Wannam ROMS
NeatRom Lite 4.8
Wanam Lite 14.6
Steps to Port
==========
1. Extract the i9100 leaked/official roms (4.1.2) zip files (for example NeatRom lite or Wannam
2. Replace the existing Modem.bin with one of these modems list - link: SGH-I777 Modems list
For NeatRom, find it under sale folder
3. Go to path "system", open "build.prop" file using Notepad++
4. Replace all strings "GT-I9100" with "SGH-I777" (you will see 7 strings, all can be replaced)
5. Save the build.prop file
6. Zip all the folders and files
7. Flash it using CWM
8. Do NOT REBOOT yet, flash Siyah v3.0 Kernel
9. You will have Jelly Bean 4.1.2 on SGH-I777.
I have used both Neat Rom and Wanam, both are working great on SGH-I777 phone.
Currently using Neat Rom Lite 4.8 running great with AJ's v3.0 kernel (WIFI toggle is fixed now - no more double tapping!)
NOTE: The above steps has to be done only if you have prior experience of flashing ROMS using CWM, if not done carefully you may brick your phone. I am not responsible if you damage your phone with the above mentioned porting steps.
My Special Thanks to SaleSale, Wanam, AJ Newkirk, Jeboo for GREAT ROMS/KERNEL
prctst said:
Porting steps from I9100 (4.1.2 JB Rom) to I777
I tried the below, so thought of sharing the steps download NeatRom/Wannam lite roms,
NeatRom Lite 4.0 - http://forum.xda-developers.com/showpost.php?p=24156315&postcount=1
Wanam Lite 13.0 - http://forum.xda-developers.com/showpost.php?p=21215571&postcount=1
Steps to Port
==========
1. Extract the i9100 roms (4.1.2) zip file contact for example NeatRom lite or Wannam 13.0
2. Replace Zimage ( from jeboo kernel 4a extract the zip) link - https://www.box.com/s/z67tvuxryjfqbzxchuov
For NeatRom, find it under sale folder
3. Replace the existing Modem.bin with UCLE5 modem.bin - link: http://forum.xda-developers.com/attachment.php?attachmentid=1408747&d=1350480671
For NeatRom, find it under sale folder
4. Copy sec_touchkey.kl to path system\usr\keylayout Download link - http://forum.xda-developers.com/attachment.php?attachmentid=1408738&d=1350480304
5. Go to path "system", open "build.prop" file using Notepad++
6. Replace string "GT-I9100" with "SGH-I777"
7. Save the build.prop file
8. Zip all the folders and files
9. Flash it using CWM
I have used both Neat Rom 4.0 and Wanam lite 13.0, but are working on fine on I777 phone, waiting for official JB Release.
Currently using Neat Rom Lite 4.0
NOTE: The above steps has to be done only if you are already experienced in flashing the roms using CWM, if not done carefully you may brick your phone. I am not responsible if you damage your with above steps mentioned.
Click to expand...
Click to collapse
I'm sure your steps will work...but mine sure are a lot easier...download, flash & reboot.:laugh:
http://forum.xda-developers.com/showpost.php?p=35646057&postcount=26
Hey why not make things a bit harder than they need to be? Hehe
loughary said:
I'm sure your steps will work...but mine sure are a lot easier...download, flash & reboot.:laugh:
http://forum.xda-developers.com/showpost.php?p=35646057&postcount=26
Click to expand...
Click to collapse
Yeah thats how I do it and it works perfectly!
Sent from my SGH-i777 using XDA Premium
easier...really? First method you only flash ONCE and you have the correct build prop...the other method = 4 different flashes and you're still left having to edit the build prop at some point. just injecting the key corrected jeboo kernel, modem then build prop edits...then flash. DONE. Whats so hard about drag and drop?
Have you guys tried porting the official JB GT-I9100 release? :silly:
san alan said:
Have you guys tried porting the official JB GT-I9100 release? :silly:
Click to expand...
Click to collapse
Yes I tried last night with the steps in post, everything working fine as of now, will post any further updates if any
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
prctst said:
Yes I tried last night with the steps in post, everything working fine as of now, will post any further updates if any
Click to expand...
Click to collapse
Awesome gonna go try and make a zip and install it right now!
Sent from my GT-P3113 using Tapatalk HD
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
I got just the Odin tar file for i9100. Is there a tutorial on converting this to cwm flashable zip?
Sent from my SGH-I777 using xda app-developers app
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
san alan said:
I got just the Odin tar file for i9100. Is there a tutorial on converting this to cwm flashable zip?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Thats why I didnt make one yesterday haha. That and im waiting for more regions to be released. So far I think only china and spain have it, gonna wait for the uk one (I didn't even see the US on Sammobiles list??).
Sent from my crack smoking SGH-i777
Slavestate said:
Thats why I didnt make one yesterday haha. That and im waiting for more regions to be released. So far I think only china and spain have it, gonna wait for the uk one (I didn't even see the US on Sammobiles list??).
Sent from my crack smoking SGH-i777
Click to expand...
Click to collapse
Porting steps only for I9100 CWM zip roms. Using the post steps you can flash NeatRom 4.1 / Wanam 14.0 or JB 4.1.2 ROM from i9100 forums
For Kernal, you can flash (through CWM) Jeboo 1.1f or Siyah i777 7.07 http://d-h.st/BFH
erad1 said:
easier...really? First method you only flash ONCE and you have the correct build prop...the other method = 4 different flashes and you're still left having to edit the build prop at some point. just injecting the key corrected jeboo kernel, modem then build prop edits...then flash. DONE. Whats so hard about drag and drop?
Click to expand...
Click to collapse
@erad1...not to cry over spilled milk but it's actually only 3 steps (if you don't use the Kernel cleaner) and as often as developers update their roms to me it's a lot easier just to just boot to cwm and flash new updates and re-flash latest kernel and modem. Without a doubt it's faster..but each their own.
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
http://forum.xda-developers.com/showthread.php?t=2113489
There ya go. Deodexed CWM flashable XXLS8 so you can port it to your i777. I gotta wait til my battery charges up to try it..
Sent from my GT-P3113 using Tapatalk HD
Slavestate said:
http://forum.xda-developers.com/showthread.php?t=2113489
There ya go. Deodexed CWM flashable XXLS8 so you can port it to your i777. I gotta wait til my battery charges up to try it..
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
Good, FYI - I am using NeatRom Lite 4.2 (Official KB XXLS8) in my opinion it is the best ROM - http://forum.xda-developers.com/showpost.php?p=24156315&postcount=1
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
Slavestate said:
http://forum.xda-developers.com/showthread.php?t=2113489
There ya go. Deodexed CWM flashable XXLS8 so you can port it to your i777. I gotta wait til my battery charges up to try it..
Sent from my GT-P3113 using Tapatalk HD
Click to expand...
Click to collapse
I managed to port indies Omega 19.1 (WXLS8)...but had to change the updater scripts quite a bit.... mainly to get rid of the aroma installer. I used the injection method for kernel and modem. This is a nice clean base to start with though so thanks for posting it!
Sent from my SAMSUNG-SGH-I717 using xda premium
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
Well it worked. Only problem with the deodexed ls8 I posted is its in Spanish while its flashing so I couldnt tell if there was any trouble but so far so good. Went right from lsj to ls8 without a reset, just a cache wipe. Running jeboos kernel with the le5 modem and its all good.
Sent from my crack smoking SGH-i777
Quick question about porting... Does porting degrades the quality of the rom because it is not optimized to run on our phone? Is it better to run roms that is specifically designed on our phone?
Re: [GUIDE] Porting steps from I9100 (4.1.2 JB Rom) to I777
haru3173 said:
Quick question about porting... Does porting degrades the quality of the rom because it is not optimized to run on our phone? Is it better to run roms that is specifically designed on our phone?
Click to expand...
Click to collapse
No
Sent from my Zanpakuto using Getsuga Tensho!
Using latest Neat Rom lite 4.3 with Siyah 7.8.1, so far working fine.
Is there much different if we want to get a GSIII ROM to our phones? Is it even possible? If yes, I presume the kernel and modem will need to be changed.
Hi guys
I have the following isue, i flashed my phone and I used this kernel
3.0.31 siyah s2-v6.0b5+ [email protected] #177
Now I cant make calls, I can't hear the person who call me and that person can't hear me, the phone radio doesn't work, sometimes the phone freeze specially when I watching videos. The phone doesn't recognize all internal memory. The return and search button doesn't work, to go back now I have to press the home button.
My question is: can I flash the kernel i have installed and install a new one. What kernel do you recommend me for this phone that works fine and what rom 4.2 is the best for this model.
I really appreciate any help.
Sent from my GT-I9100 using Tapatalk
Your signature says your phone is GT-I9100, but this is the forum for SGH-I777 AT&T version of Galaxy SII. Which phone do you have?
I have an i777 from at&t, after i flashed the kernel the phone model changed from i777 to I9100, but it is an i777 from at&t
Sent from my GT-I9100 using Tapatalk
Did you flash only the kernel, or did you also flash a rom?
What version of the operating system, and what rom are you currently running?
The kernel you flashed was built for the GT-I9100, which has a different hardware configuration from the SGH-I777. You should flash a kernel that was built for the I777, probably AJK, but answer the above questions first before I suggest which one.
First I flashed the kernel and installed the siyah one, then I installed a different rom. I had before 3.2 and then I installed 4.1.2 rom. Can you recommend me a god kernel for the I777 and a good rom if it possible 4.1.2 or 4.2 . I really appreciate your help.
Sent from my GT-I9100 using Tapatalk
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Click to expand...
Click to collapse
You appear to have flashed the GT-I9100 stock XWLS8 full package. Most likely you flashed the I9100 boot loaders with it. You also have an I9100 modem. I'm guessing that you flashed the I9100 siyah kernel afterwards. Your I-777 will not function with that firmware. I am surprised it even booted into system.
First, double verify that you are working with a SGH-I777 by pulling the battery and looking at the label in the battery compartment. After verifying that you have an I-777, you should flash the AT&T version of stock 4.1.2, I777UCMD8 full package which you can get from the download repository.
If you are unsure of anything, or have any questions, please ask before proceeding.
If you want to root and install a custom kernel, or install a custom rom, after getting your phone working again, we can point you in the right direction.
Thanks for your help, yes I verified and it is an i777 from at&t.
A have some questions:
1- I need to flash the kernel first and then install the new one?
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
3-how I get rooted after do that?
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
1- I need to flash the kernel first and then install the new one?
Click to expand...
Click to collapse
No. Flash the I777UCMD8 full package from the download repository first. It contains the complete firmware, including stock kernel, stock system, an AT&T modem, and the I777 boot loaders. You can do any modifications after you return the phone to full stock 4.1.2.
3-how I get rooted after do that?
Click to expand...
Click to collapse
I am answering this question next, because it is the next step after flashing the stock firmware. To root, you should use the Framaroot application which you install on your phone. Use the Aragorn exploit. If the latest version doesn't work, download and use an earlier version, like 1.4.2.
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
Click to expand...
Click to collapse
Once rooted, you should use Mobile Odin lite or Mobile Odin Pro to install a custom kernel containing ClockworkMod Recovery. With this stock firmware, you would use AJK v4.9 No Swap.
After downloading the kernel, open the zip file and extract the boot.img. Use that to flash in Mobile Odin. After flashing the capacitive buttons will not work, so immediately reboot into recovery and flash the full AJK v4.9 No Swap package in CWM.
4.1.2 is the latest version of stock firmware available for the I777. If you want the Samsung Touchwiz interface, that is the latest you can get. Anything available 4.2 and above will be AOSP based. You can look in the I777 Android Development forum and the I777 Ported Development forum to see what is available. They all flash from ClockworkMod Recovery.
Ok man thanks, I'll do that, after that I'll let you know how everything goes
Sent from my GT-I9100 using Tapatalk